Agilent E5052B Signal Source Analyzer 10 MHz to 7 GHz, 26.5 GHz ...

System Performance with the E5053A Microwave DownconverterThe system performance is the combination of the E5052B SSA and theE5053A microwave downconverter. All data is typical performance.Table 10-1. System performance characteristicsDescriptionRF input portInput connectorFrequency rangeInput levelCarrier search rangePhase noise measurementSSB phase noise sensitivityFrequency tracking rangeSpectrum monitor measurementFrequency spanRBW (resolution bandwidth)Level uncertaintyFrequency & RF power measurementFrequency measurement resolutionRF Power measurement uncertaintyTransient measurementWideband frequency rangeNarrowband frequency rangeRF Power measurement uncertaintyPerformance characteristicsAPC-3.5 (female), 50 ohm nominal (E5053A Input)10 MHz to 3 GHz (E5052B RF IN port)3 to 26.5 GHz (E5053A Input port)3 to 10 GHz frequency band: fundamental mixing9 to 26.5 GHz frequency band: third harmonics mixing–15 to +20 dBm (10 MHz to 3 GHz, E5052B RF IN port)–30 to +10 dBm (3 to 10 GHz frequency band)–20 to +5 dBm (9 to 26.5 GHz frequency band)–10 to +10 dBm (3 to 10 GHz frequency band)–10 to +5 dBm (9 to 26.5 GHz frequency band)See Table 10-2, Figure 10-2 and Figure 10-3.1.8 MHz (< 4.9 GHz carrier in 3 to 10 GHz frequency band)2.8 MHz (> 4.9 GHz carrier in 3 to 10 GHz frequency band)1.3 MHz (< 10 GHz carrier in 9 to 26.5 GHz frequency band)2.6 MHz (> 10 GHz carrier in 9 o 26.5 GHz frequency band)15 MHz maximum1.53 Hz to 400 kHz± 4 dB10 Hz, 1 kHz, or 64 kHz± 2 dB (10 MHz to 3 GHz, E5052B RF IN port)± 3 dB (low band: 3 to 10 GHz)± 4 dB (high band: 9 to 26.5 GHz)Power uncertainty can be improved by applying the ‘user power cal.’ function.50 MHz to 3 GHz (E5052B RF IN port)500 MHz (E5053A Input port)3.125 kHz, 25 kHz, 200 kHz, 1.6 MHz, 25.6 MHz, or 80 MHz± 2 dB (10 MHz to 3 GHz, E5052B RF IN port)± 3 dB (low band: 3 to 10 GHz)± 4 dB (high band: 9 to 26.5 GHz)Power uncertainty can be improved by applying the ‘user power cal.’ function.E5053A microwave downconverterE5052B signal source analyzerLO outIF inD-PLLIF outLO inIF amp.RF inRF outADCFFT3 GHzto26.5 GHzinputLO inIF outRFRFFundamentalor3rd harmonicmixingIF amp.10 MHzto3 GHzinputRF outRF inADCDSP(correlation)FFTDisplayIF inLO outD-PLLFigure 10-1. E5053A with E5052B simplified block diagram16