11.07.2015 Views

buyer's guide 2013 - Aqua Lung

buyer's guide 2013 - Aqua Lung

buyer's guide 2013 - Aqua Lung

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Apeks Buoyancy compensatorsWTX3 Buoyancy CellThis single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate.• Gussets along each side allow for a full 34 lbs of lift without compromising the overall size of the WTX3• 4 slots allow it to be mounted to a WTX harness or back plate using upper and lower nylon cylinderbands• 2 pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting kit is used• A 2” (5cm) wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into theinflated buoyancy cell so it doesn’t get pushed away from your body• A 2” (5cm) D-ring on the restrictor band is a convenient place to add accessories like a surface markerbuoy• The airway comes off the top back center of the cell. A safety cable inside the elliptical hose preventshyperextension of the corrugated hose• Features the Apeks technical inflator with brass buttons• Includes front, lower left pull dump• Constructed from durable 840-denier nylonPart # Description UPC Code MAP388032 WTX3–Buoyancy Cell 053242 188036 290.00WTX4 Buoyancy CellThe WTX4 is a smaller version of the WTX6 & WTX8 but it can accept single cylinders too!• The WTX4 provides 45lbs. of lift• The WTX4 can mate directly to the WTX harness or the stainless steel back plate using twin tankbands or using center bolts• Highly efficient drains allow water to empty quickly after a dive• Outer bag constructed out of 1000D Armorshield Cordura® to resist abraision and fading• Inner bag constructed from mil-spec welded fabric, the same fabric used in survival vests wornby US fighter pilots.• The airway comes off of the back top center of the cell. A safety cable inside the elliptical hoseprevents hyperextension of the corrugated hose• Features the Apeks technical inflator with brass buttons• Pull dump on inside lower left• Optional pull dump may be added to the inside lower right• Accepts WTX Internal Retractor Kit part number: 388300Part # Description UPC Code MAP388345 WTX4 45lb Buoyancy Cell 053242 254571 350.00with Retract Optionaqualung.com17

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!