DMX-ADDRESS-MODULE - DMX4ALL GmbH

More documents

Recommendations

Info

DMX-Address-Module 2SpecificationThe DMX-Address-Module is a useful add-on, which can be connected to the DMXdata line. A starting address of any DMX device, which is connected behind theDMX-Address-Module, can be centrally adjusted by it.The DMX devices, which are connected behind the DMX-Address-Module, react totheir adjusted starting address plus the address of the DMX-Address-Module minusone.Resulting address = DMX-Address-Module address + device address - 1Example:DMX-Address- Device address Resulting addressModule address1 1 115 1 151 15 1515 15 29Note: If only one DMX device is be driven by the DMX-Address-Module the startingaddress of this device should be set to one, so the resulting address is equal to theaddress of the DMX-Address-ModuleExample of a configuration with 2x 6 DMX controlled outputs and one centrallyadjusted DMX address by the DMX-Address-Module:
DMX-Address-Module 3Data SheetVoltage supply:DMX-input:DMX-channels:DMX-output:Envelope delay:Board Dimension:5V DC / 50mADMX-signal / 1 LOAD-UNITnoneDMX-signal for 32 LOAD-Unitsca. 0,1µs30mm x 45mmLED-Display-CodesThe integrated DMX-LED is used as a multifunctional display.This LED lights nonstop in normal operation. If the LED does not light, there is noDMX512-input-signal.Also the LED signalled the operation status. In this case the LED lights up in shortpitches and then turns into off modus. The Number of flashing signals is equal tothe Number of the error status:Error ErrorDescriptionStatus1 No DMX Please check the DMX signal2 Address error Check if a valid DMX-starting address isadjusted.3 DMX-signal error An invalid DMX input signal is established.
Page 1: DMX-ADDRESS-MODULEUser Manual
Page 5 and 6: DMX-Address-Module 5TWI-InterfaceTh
Page 7 and 8: DMX-Address-Module 7CE-conformityTh

DMX-ADDRESS-MODULE - DMX4ALL GmbH

Create successful ePaper yourself

Delete template?

Save as template?