Hybrid Card Reader Writer 866

Hybrid Card Reader Writer 866Power requirements + 5 V DC, 500 mA, +12 V DC, 1AIn / outputs TTL-level,smartcard contacts directOptionsRS232, MM-sensorholder, mech.Shutter, el. ShutterOutline dimensions 46 x 62 x 150 mmA motorized read/write unit formagnetically encoded credit cardsand smart card.This small hybrid reader/writer readsand encodes 2 (3 tracks indevelopment) tracks of the magneticcard and the standard smart card(ISO/CP 8 location). The card staysinside the unit during the wholeread/write operation. Card capturefacility is provided. The unit offers thepossibility to install an ”MM- sensor”(GAO-CIM 86).The unit has been developed to beused in ATM´s, POS systems, ordebit systems.An optional RS 232 is available.technical data 1Height38 mmWidth62 mmDepth150 mmWeightca. 400 gr.Card sizeIdentification cards ID1, ISO 7810 ffChipcard ISO 7816 / 2Magnetic track location ISO-1, ISO-2, ISO-3, and combinationsCard feed speed 200 mm / sec. +/- 10 %Connection24 pole pin socket, 10 pole pin socketPower supply + 5 VDC ± 5 %+ 12 VDC ± 5 %

Storage temperature-20°C bis +70°COperating temperature -5°C bis +55°CHumidity10 - 90% rel. H., no condensingLife200.000 operationsMechanical characteristicsDimension38 x 62 x 150 mmWeightca. 400 gr.Fixation4 x M3 threads, lateral, 3 mm deepInsertion cycles200.000 ops.Card feed speed 200 mm / sec. ± 10%Contact location according to ISO 7816Number of contacts 6, 8 or 16Contact systemlandingContact styleBall radius > 0,8 mmTransportDC motor, beltCard lifemin. 2.000 operationsEnvironmental conditionsTestclass acc. to IEC 68Storage temperature-20°C to +70°COperating temperature +5°C to +55°CHumidity10 to 90%, rel. h., not condensingtechnical data 2Electrical characteristicsChip contactsContact resistance < 100 mOhm (IEC 512-2)Isolation resistance > 10 12 Ohm (IEC 512-2 Test 2a)Impulse voltage 800 V (eff/-) (IEC 664)Pollution 2 (IEC 664)Clearance distance > 1,4 mm (IEC 664)Creapage distance 0,3 mm (IEC 664)Contact capacity < 5 pF (IEC 512-, Test 22a)Power requirements +5 V DC ± 5%, 500 mA+12 V DC ± 5%, 1AIn / OutputsTTL-level, low aktivChipcontacts direct, withoutMagnetic head2 tracks read/writeTrack location ISO 1+2 or ISO 2+3

Track location ISO 1+2 or ISO 2+3Connectors Strip connector, 24-poles (T&B 609-2427)Strip connector, 10-poles (T&B 609-1008)Recommended counterpart T&B 609-2401M, 24-polesT&B 609-10001M, 10-poles