Instruments Brochure - WoodBeam
Instruments Brochure - WoodBeam
Instruments Brochure - WoodBeam
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Nieaf-Smitt Installation technology<br />
Portable test- & measuring equipment<br />
Test Tools • Environmeters • Multimeters • Current Clamps<br />
English version
Nieaf-Smitt Installation technology<br />
Portable test- & measuring equipment
Millions of instruments daily used world wide
Nieaf-Smitt - Installation technology<br />
Company NIF (Netherlands Instrumentation Factory, later to become<br />
Nieaf-Smitt) started in 1900 as one of the first companies in the world with<br />
the design and manufacturing of instrumentation for electrical values.<br />
Since than Nieaf-Smitt has served the ongoing upgrading, upscaling,<br />
modernization and technical refinement in the installation sectors.<br />
The complexity and diversity in the installation sectors demands the specialism<br />
that Nieaf-Smitt provides by offering reliable instrumentation securing the<br />
energy efficiency and safety demands installations and appliances.<br />
Design, manufacturing and supply of portable test and measuring equipment,<br />
characterized by quality and dependability. The portfolio of test tools, digital<br />
multimeters, current clamps, appliance and installation testers and power<br />
analysers is focused on solving the industry demands.<br />
Worldwide availability is assured by a network of professional, trained and<br />
dedicated subsidiaries, distributors and agents, offering local service and<br />
support.<br />
Nieaf-Smitt has certified quality and environmental management systems<br />
according to the leading international standards. ISO 9001/2000 and ISO 14001<br />
are obtained. The process to achieve certification according to OHSAS 18001<br />
is pending.<br />
Nieaf-Smitt not only has a clear eye directed at reliability, dependability,<br />
safety and cost-effectiveness, but also to the demands of our planet.<br />
Environmental consciousness is woven closely into design, manufacturing<br />
and commercial operations. The company is contributing to the safety of<br />
the world in more ways than one.<br />
Utrecht, September 2009<br />
Nieaf-Smitt B.V. continous to improve its products and services. Specifications can be changed<br />
without prior notice. No rights can be derived from specifications in this brochure.<br />
Changes and printed errors reserved.<br />
5<br />
www.nieaf-smitt.nl
Installations today demand reliability
Test Contents tools<br />
Test Tools<br />
VoltSpotter........................................................................ 13<br />
VoltBeeper......................................................................... 14<br />
VoltSafe............................................................................ 15<br />
VoltPointer......................................................................... 16<br />
EazyVolt I.......................................................................... 17<br />
EazyVolt II.......................................................................... 18<br />
EazyVolt........................................................................... 19<br />
EazyVolt Plus....................................................................... 20<br />
EazyAmp.......................................................................... 21<br />
EazyPhase......................................................................... 23<br />
EazyTester......................................................................... 22<br />
Linespotter........................................................................ 24<br />
Accessories........................................................................ 25<br />
Environmeters<br />
NI T880............................................................................ 29<br />
NI T883............................................................................ 30<br />
NI T82.............................................................................. 31<br />
NI L204............................................................................ 32<br />
NI S102............................................................................ 33<br />
NI TH 183.......................................................................... 34<br />
NI T8820........................................................................... 35<br />
Accessories........................................................................ 36<br />
Multimeters<br />
Eazy MM........................................................................... 39<br />
NI 61............................................................................... 40<br />
NI 62............................................................................... 41<br />
NI 72............................................................................... 42<br />
NI 77............................................................................... 43<br />
NI 79C............................................................................. 44<br />
NI 98 II............................................................................. 45<br />
NI 99 II............................................................................. 46<br />
NI 305R............................................................................ 47<br />
Accessories.................................................................... 48 - 49<br />
Current clamps<br />
NI 02............................................................................... 53<br />
NI 03............................................................................... 54<br />
NI 1715............................................................................ 55<br />
NI 30............................................................................... 56<br />
NI 11............................................................................... 57<br />
NI 11R............................................................................. 58<br />
NI 12R............................................................................. 59<br />
NI 16R............................................................................. 60<br />
NI 18 plus.......................................................................... 61<br />
NI 349 PR.......................................................................... 62<br />
Accessories........................................................................ 63<br />
Earth leakage clamp<br />
NI 333.............................................................................. 67<br />
Accessories........................................................................ 68<br />
Current clamp adapters<br />
NI 31............................................................................... 71<br />
NI 39T.............................................................................. 72<br />
20A/1V and 200A/1V............................................................... 73<br />
400A/1V and 1000A/1V............................................................ 74<br />
Flexclamp 3000A/1V 1 phase....................................................... 75<br />
Earth clamps (utility-city measurements)........................................... 76<br />
7<br />
www.nieaf-smitt.nl
Quality and safety are the drivers<br />
of our thinking and doing
Symbols<br />
Overvoltage installation categories, according to IEC 61010-1<br />
IV<br />
I<br />
Measurement<br />
category IV is for<br />
measurements<br />
performed at the<br />
source of the<br />
low-voltage<br />
installation<br />
Measurement<br />
category I is for<br />
measurements<br />
performed on<br />
circuits not directly<br />
connected to MAINS<br />
III<br />
Measurement<br />
category III is for<br />
measurements<br />
performed in the<br />
building installation<br />
Measurement<br />
category II is for<br />
measurements<br />
performed on circuits<br />
directly connected<br />
to the low voltage<br />
installation<br />
II<br />
I<br />
CAT I<br />
Examples are measurements on circuits not derived from<br />
MAINS, and specially protected (internal) MAINS-derived<br />
circuits. In the latter case, transient stresses are variable;<br />
for that reason, 5.4.1 g requires that the transient<br />
withstand capability is made known to the user.<br />
III<br />
CAT III<br />
Examples are measurement on distribution boards,<br />
circuit breakers, wiring, including cables, bus-bars,<br />
junction boxes, switches, socket-outlets in the fixed<br />
installation, and equipment for industrial use and some<br />
other equipment, for example, stationary motors with<br />
permanent connection to the fixed installation.<br />
II<br />
CAT II<br />
Examples are measurement on household appliances,<br />
portable tools and similar equipment.<br />
IV<br />
CAT IV<br />
Examples are electricity meters and measurements<br />
on primary overcurrent protection devices and ripple<br />
control units.<br />
IP 64<br />
This product has IP64 protection class<br />
This product can measure True RMS values<br />
This product is in accordance to the IEC / EN 61010-1 norm<br />
61010-1<br />
9<br />
www.nieaf-smitt.nl
Calibration and support<br />
Calibration & repair services<br />
•<br />
•<br />
•<br />
Calibration of all brands and types and measurement equipment.<br />
Repair of all Nieaf-Smitt equipment.<br />
Helpdesk to support the operation of all Nieaf-Smitt equipment and matching software.<br />
Calibration<br />
Nieaf-Smitt has a professional calibration center. All electrical measurement equipment can be calibrated<br />
(multimeters, current clamps, temperaturemeters, installation testers, power meters, safety testers, etc.)<br />
You receive automatically an anual notice to have your instruments calibrated, after registration.<br />
This way you do not have to worry about the validity of the calibration of your instruments.<br />
Support<br />
Repairs<br />
Nieaf-Smitt has a modern repair division, meeting the ISO 9001 standard. Faults are dealt with quickly and<br />
with competence.<br />
Helpdesk<br />
Questions concerning the operation of a tester, the performance of a test or software can be addressed to<br />
our helpdesk. Your requirements for extra explanation or instruction will be handled promptly.<br />
Over the years Nieaf-Smitt has gained a lot of experience that we share with our customers through our<br />
repair and helpdesk divisions.<br />
The helpdesk, calibration & repair divisions can be contacted during (CET) 8.00 - 16.30 hour on phone<br />
number +31 30 285 0285 or via email: helpdesk@nieaf-smitt.nl<br />
10<br />
www.nieaf-smitt.nl
Test tools<br />
Test tools are instruments which are useful to everybody working<br />
with electricity. These meters excel in simplicity.<br />
For detection of voltage or non-voltage we offer you the<br />
Non-Contact-Voltage-Detectors. Whether you want to measure<br />
voltage or recognise the phase sequence and even automatic<br />
measurement of voltage, current and resistance, the test tools<br />
are useful for everybody!<br />
11<br />
www.nieaf-smitt.nl
Test tools<br />
For safe and quick detection of voltage presence, four voltage detectors are available. Approaching a voltage<br />
leading part, the voltage detectors will indicate this in several ways. The VoltSpotter indicates optical,<br />
the VoltBeeper, VoltSafe and VoltPointer indicate both optical and acoustic signal. The Voltsafe and the<br />
VoltPointer are not only instruments for voltage detection but also for non-voltage detection.<br />
The line of voltage testers EazyVolt, offer the ability to measure and indicate the exact<br />
voltage (AC / DC), phase indication, phase rotation, continuity and even frequency (EazyVolt plus).<br />
The EazyAmp is a versatile electrical tester for measuring current up to 200A in a CAT IV 600V environment.<br />
The EazyTester is an universal and easy to use, fully automatic Test Tool. The instrument detecs and switches<br />
automatically to the quantity to be measured, based on a priority system. All the models and the differences<br />
between them are shown in the selection diagram below.<br />
Selection diagram<br />
VoltSpotter VoltBeeper VoltSafe VoltPointer EazyVolt I EazyVolt II EazyVolt EazyVolt<br />
EazyAmp EazyPhase EazyTester<br />
Indication LED LED LED LED LED Digital LED Digital Digital LED Digital<br />
Optical indication<br />
voltage presence<br />
Acoustic indication<br />
voltage presence<br />
Non-contact<br />
Voltage detection<br />
• • • • • • • • • •<br />
• • • • • • • • •<br />
• • • • •<br />
Non-voltage detection<br />
• • • •<br />
Self-test<br />
• • • •<br />
Flashlight/Torch<br />
• • • • • •<br />
Voltage AC<br />
• 1 • 1 • 1 • 1 • • • • • •<br />
Voltage DC<br />
• • • • • •<br />
Resistance<br />
• • • •<br />
Current AC<br />
• •<br />
Phase Sequence<br />
• 1 • 1 • 1 • 1 • • • • •<br />
Hold function<br />
• •<br />
Plus<br />
Overvoltage Category<br />
CAT IV<br />
600V<br />
CAT IV<br />
600V<br />
CAT IV<br />
600V<br />
CAT IV<br />
600V<br />
CAT IV<br />
600V<br />
CAT IV<br />
600V<br />
CAT IV<br />
600V<br />
CAT IV<br />
600V<br />
CAT IV<br />
600V<br />
CAT III<br />
600V<br />
CAT III<br />
600V<br />
Battery<br />
2 x AAA<br />
1,5V<br />
2 x AAA<br />
1,5V<br />
2 x AAA<br />
1,5V<br />
2 x AAA<br />
1,5V<br />
2 x AAA<br />
1,5V<br />
2 x AAA<br />
1,5V<br />
2 x AAA<br />
1,5V<br />
2 x AAA<br />
1,5V<br />
1 x LR61<br />
9V<br />
1 x LR61<br />
9V<br />
1 x LR61<br />
9V<br />
Page number 13 14 15 16 17 18 19 20 21 23 22<br />
1 detection only<br />
12<br />
www.nieaf-smitt.nl
Test tools<br />
VoltSpotter<br />
Article number: 626 000 660<br />
Voltage detector<br />
The VoltSpotter, an automatic non-contact voltage detector,<br />
will indicate the presence of AC voltage by phase detection. An<br />
optical signal is given upon voltage presence, without touching<br />
the cable.<br />
When approaching an AC voltage, the LED in the partly transparent<br />
tip of the test tool will illuminate bright red.<br />
With the wide range of 100 – 1000 V AC and the stable design<br />
is determination of phase guaranteed. The VoltSpotter can be<br />
used in many service purposes, for detection of cable breach etc.<br />
The slim pen size shape makes the VoltSpotter quick and easy in<br />
use and storage.<br />
Features<br />
•<br />
•<br />
•<br />
Non contact voltage detection<br />
Optical signal when voltage is detected<br />
Phase detection<br />
Including<br />
+ Batteries<br />
+ Manual<br />
IP<br />
Specifications<br />
Function<br />
Voltage detection<br />
Range<br />
100 – 1000 Volt AC<br />
Specifications<br />
Supply<br />
IP-Protection<br />
Overvoltage category<br />
Drop proof<br />
2x AAA, 1.5V battery<br />
IP64<br />
CAT IV / 600V - CAT III / 1000 V<br />
4 ft.<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
155 x 20 x 16 mm.<br />
± 45 gram<br />
13<br />
www.nieaf-smitt.nl
Test tools<br />
VoltBeeper<br />
Article number: 626 000 661<br />
Voltage detector<br />
The VoltBeeper is an automatic non-contact voltage detector<br />
with optical and acoustic signal.<br />
When approaching an AC voltage, the LED in the partly transparent<br />
tip of the test tool will illuminate bright red as well as a beeping<br />
signal is given. This is very convenient for detection under bright<br />
(sunny) circumstances or hidden locations.<br />
The range of 100 – 1000 V AC makes the VoltBeeper universal<br />
applicable. As the acoustic signal is approx. 65 dB, the tester can<br />
also be used in industrial surroundings.<br />
Features<br />
•<br />
•<br />
•<br />
Non contact voltage detection<br />
Optical and acoustical signal when voltage is detected<br />
100 – 1000V AC<br />
Including<br />
+ Batteries<br />
+ Manual<br />
IP<br />
Specifications<br />
Function<br />
Voltage detection<br />
Range<br />
100 – 1000 Volt AC<br />
Specifications<br />
Supply<br />
IP-Protection<br />
Overvoltage category<br />
Drop proof<br />
2x AAA, 1.5V battery<br />
IP64<br />
CAT IV / 600V - CAT III / 1000 V<br />
4 ft.<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
155 x 20 x 16 mm.<br />
± 45 gram<br />
14<br />
www.nieaf-smitt.nl
Test tools<br />
VoltSafe<br />
Article number: 626 000 662<br />
Voltage detector<br />
The VoltSafe is an unique instrument, being a voltage detector<br />
ánd non-voltage detector. The detector is always activated and<br />
gives a (red) optical and an acoustic signal upon the presence of<br />
AC voltage.<br />
By activating the on/off switch, the correct operation of the<br />
detector is checked (selftest). A single beep will sound and the<br />
probe tip will illuminate shortly. Both the pcb as well as the<br />
battery power are tested. The proper functioning of the unit is<br />
proved and a green LED is given for ~ 15 sec. Upon detection of<br />
voltage the VoltSafe will indicate both optical as acoustic. Since its<br />
functionality was tested, no indication of the VoltSafe means no<br />
detection of voltage; non-voltage detection.<br />
With the range of 100 – 1000 V AC and the acoustic signal of<br />
65 dB, the VoltSafe is a universal instrument and can be used<br />
in many service purposes.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
Voltage detector up to 1000V AC<br />
Non Voltage detection<br />
Self-test by on/off switch<br />
Optical and acoustical signal when voltage is detected<br />
Including<br />
IP<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function<br />
Voltage detection<br />
Range<br />
100 – 1000 Volt AC<br />
Specifications<br />
Supply<br />
IP-Protection<br />
Overvoltage category<br />
Drop proof<br />
2x AAA, 1.5V battery<br />
IP64<br />
CAT IV / 600V - CAT III / 1000 V<br />
4 ft.<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
128 x 28 x 16 mm.<br />
± 55 gram<br />
15<br />
www.nieaf-smitt.nl
Test tools<br />
VoltPointer<br />
Article number: 626 000 663<br />
Voltage detector<br />
The VoltPointer has equal functions to the VoltSafe; it is a<br />
voltage detector ánd non-voltage indicator. The detector is<br />
always activated and will automatically give a (red) optical and<br />
an acoustic signal upon the presence of voltage.<br />
By activating the on/off switch, the correct operation of the<br />
detector is checked (selftest). A single beep will sound and the<br />
probe tip will illuminate shortly. Both the pcb as well as the<br />
battery power are tested. The proper functioning of the unit is<br />
proved and a green LED is given for ~ 15 sec. Upon detection of<br />
voltage the VoltSafe will indicate both optical as acoustic. Since its<br />
functionality was tested, no indication of the VoltSafe means no<br />
detection of voltage; non-voltage detection.<br />
In the tip of the VoltPointer, a bright LED is positioned that can<br />
be switched on manually and used as a (small) flashlight/torch.<br />
This makes the VoltPointer very suitable for use in poorly lit<br />
locations such as switch boards, distribution boxes etc.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Non Voltage detection<br />
Optical and acoustical signal when voltage is detected<br />
Self-test by on/off switch<br />
100 – 1000V AC<br />
Flashlight/torch<br />
Including<br />
IP<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function<br />
Voltage detection<br />
Range<br />
100 – 1000 Volt AC<br />
Specifications<br />
Supply<br />
IP-Protection<br />
Overvoltage category<br />
Drop proof<br />
2x AAA, 1.5V battery<br />
IP64<br />
CAT IV / 600V - CAT III / 1000 V<br />
4 ft.<br />
Acc. to Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
128 x 28 x 16 mm.<br />
± 60 gram<br />
16<br />
www.nieaf-smitt.nl
Test tools<br />
EazyVolt I<br />
Article number: 626 000 600<br />
Voltage tester<br />
The EazyVolt I is a reliable and safe 6-in-1 automatic voltage<br />
tester up to 690 V, with functions:<br />
• Measuring AC Voltage<br />
• Measuring DC Voltage<br />
• Phase detection<br />
• Continuity<br />
• Phase rotation<br />
• RCD test by phase- earth (once charged)<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Fully Automatic<br />
Flashlight/torch<br />
3 Phase rotation by 2 probes<br />
Selectable probe tips 2 / 4 mm<br />
Fail safe (no battery for VAC/DC measurement)<br />
Water resistant (IP 64)<br />
Including<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function<br />
Voltage measuring<br />
Range<br />
6 - 690 Volt AC/DC<br />
IP<br />
Recommended accessories<br />
EVH-I holster<br />
626 000 620<br />
see page 25<br />
Extra probe tips 2-4 mm.<br />
626 006 024<br />
see page 25<br />
Extra protection points (GS38)<br />
626 006 028<br />
see page 25<br />
Specifications<br />
Probe tips<br />
2 + 4 mm. with thread<br />
LED resolution 6, 12, 24 ,36, 50, 120, 230, 400,<br />
690V<br />
Response time<br />
Phase rotation<br />
Continuity<br />
Frequency<br />
Test leads<br />
Supply<br />
IP-Protection<br />
Over voltage category<br />
Drop proof<br />
Standards<br />
Certification<br />
Dimensions<br />
Weight<br />
< 0.1 s LED<br />
2-polig<br />
< 200 k Ω<br />
0…65 Hz<br />
1,2 m<br />
2x AAA, 1.5V battery<br />
IP64<br />
CAT III / 1000V, CAT IV / 600V<br />
4 ft.<br />
EN 61010-1, EN 61243-3, EN<br />
61557-7<br />
KEMA, CSA<br />
240 x 56 x 24 mm.<br />
± 230 gram (incl. batteries)<br />
17<br />
www.nieaf-smitt.nl
Test tools<br />
EazyVolt II<br />
Article number: 626 000 610<br />
Voltage tester<br />
The EazyVolt II is a reliable and safe 7-in-1 automatic voltage<br />
tester up to 690 V, with functions:<br />
• Measuring AC Voltage<br />
• Measuring DC Voltage<br />
• Resistance<br />
• Phase detection<br />
• Continuity<br />
• Phase rotation<br />
• RCD test by phase- earth (once charged)<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Fully Automatic<br />
Flashlight/torch<br />
3 Phase rotation by 2 probes<br />
Selectable probe tips 2 / 4 mm<br />
Fail safe (no battery for VAC/DC measurement)<br />
Water resistant (IP 64)<br />
Including<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function<br />
Voltage measuring<br />
Range<br />
6 - 690 Volt AC/DC<br />
Resistance 0 ... 2k Ω + (3% + 10d)<br />
Specifications<br />
IP<br />
Probe tips<br />
Test leads<br />
Drop proof<br />
2 + 4 mm. with thread<br />
1,2 m<br />
4 ft.<br />
Recommended accessories<br />
LCD resolution<br />
bargraph<br />
8.0 - 150V, res =0.1V<br />
151 - 690V, res = 1V<br />
Accuracy + (3% + 2d)<br />
Response time<br />
< 0.1 s LED /
Test tools<br />
EazyVolt<br />
Article number: 626 000 721<br />
Voltage tester<br />
The EazyVolt is a reliable 7-in-1 automatic voltage tester up to<br />
750 V, with functions:<br />
• Measuring AC Voltage<br />
• Measuring DC Voltage<br />
• Phase detection<br />
• Continuity<br />
• Phase rotation<br />
• RCD test by phase- earth (once charged)<br />
• Self-test by switch<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Fully automatic<br />
Flashlight/torch by ultra bright LED<br />
3 Phase rotation by 2 probes<br />
Selectable probe tips 2 / 4 mm<br />
Water proof (IP 65)<br />
Fail safe (no battery for VAC/DC measurement)<br />
Shuko compliant (19 mm)<br />
1-hand operation<br />
Including<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function<br />
Voltage Range<br />
Range<br />
12 … 750V AC / DC<br />
Specifications<br />
Recommended accessories<br />
EVH-I holster<br />
626 000 620<br />
see page 25<br />
Auto power on<br />
LED resolution<br />
Voltage detection<br />
Drop proof<br />
Response time<br />
Frequency range<br />
Continuity<br />
>12V AC/DC<br />
12, 24, 50, 120, 230, 400, 750V<br />
Automatic<br />
4 ft.<br />
Test tools<br />
EazyVolt Plus<br />
Article number: 626 000 722<br />
Voltage tester<br />
The EazyVolt is a reliable 9-in-1 automatic voltage tester up to<br />
750 V, with functions:<br />
• Measuring AC Voltage<br />
• Measuring DC Voltage<br />
• Resistance<br />
• Frequency<br />
• Phase detection<br />
• Continuity and diode<br />
• Phase rotation<br />
• RCD test by phase- earth (once charged)<br />
• Self-test by switch<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Fully automatic<br />
Flashlight/torch by ultra bright LED<br />
3 Phase rotation by 2 probes<br />
Selectable probe tips 2 / 4 mm<br />
Dual display for VAC and Hz<br />
Water proof (IP 65)<br />
Fail safe (no battery for VAC/DC measurement)<br />
Shuko compliant (19 mm)<br />
1-hand operation<br />
Including<br />
+ Batteries + Manual<br />
Specifications<br />
IP 65<br />
Function<br />
Voltage Range<br />
Frequency range<br />
Resistance<br />
Range<br />
12 … 750V AC (±1,3% +5d)<br />
12 … 750V DC (±1,0% +2)<br />
1 … 999 Hz (±0,3% +5d)<br />
0 … 2KΩ (±2% +2d)<br />
Specifications<br />
Recommended accessories<br />
EVH-I holster<br />
626 000 620<br />
see page 25<br />
Extra probe tips 2-4 mm.<br />
626 006 024<br />
see page 25<br />
Extra protection points (GS38)<br />
626 006 028<br />
see page 25<br />
Over voltage protection<br />
Supply<br />
LCD Resolution<br />
Drop proof<br />
Voltage detection<br />
Response time<br />
Continuity<br />
Auto power on<br />
IP protection<br />
CAT III 1000V / CAT IV 600V<br />
2x AAA, 1.5V battery<br />
1V<br />
4 ft.<br />
Automatic<br />
Test tools<br />
EazyAmp<br />
Article number: 626 000 706<br />
Current Clamp<br />
The EazyAmp is a 2-pole voltage tester an a very user-friendly<br />
current clamp.<br />
With the open jaw, currents up to 200A AC can be measured<br />
quickly. The tester can also be used for AC/DC voltage<br />
measuring, resistance measuring and continuity test with<br />
acoustic indication.<br />
Unique is the new Voltsense. This feature gives you the opportunity<br />
to easily detect whether there is voltage present or not.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Compact open jaw (for narrow spaces)<br />
Continuity and diode<br />
Current up to 200A AC<br />
Resistance measurement<br />
Non contact voltage detection - Voltsense<br />
Hold function<br />
Including<br />
+ Batteries<br />
+ Manual<br />
Testleads<br />
Recommended accessories<br />
Specifications<br />
Function<br />
Voltage detection AC / DC<br />
Current AC<br />
Resistance<br />
Range<br />
0 - 600 Volt AC/DC<br />
0 - 200 A AC<br />
0…2k Ω<br />
EVH-I holster<br />
626 000 620<br />
see page 25<br />
Bag EazyAmp<br />
626 000 483<br />
see page 25<br />
Specifications<br />
Max. diameter conductor 12,7 mm.<br />
Continuity<br />
< 25 Ω sound signal<br />
Supply<br />
1 x 9V 6LR61 battery<br />
IP-Protection<br />
IP40<br />
Overvoltage category<br />
CAT III 1000V / CAT IV 600V<br />
Standards EN 61010-1, EN 55022,<br />
IEC 801-2, IEC801-3, IEC801-4<br />
Dimensions<br />
188 x 67 x 41 mm.<br />
Weight<br />
± 265 gram<br />
21<br />
www.nieaf-smitt.nl
Test tools<br />
EazyTester<br />
Article number: 626 005 027<br />
Current Clamp<br />
The EazyTester is an universal and easy to use, fully automatic<br />
test tool to measure AC/DC voltages, AC current and resistance.<br />
The tester can also perform a continuity test, has a Data Hold<br />
and an Auto Power Off function. The instrument detects and<br />
switches automatically to the value to be measured, based on<br />
a priority system. First the EazyTester will measure AC or DC<br />
voltages. In case this signal is (almost) missing, the tester will<br />
automatically switch into resistance mode. In case this signal<br />
cannot be indicated, the tester will automatically switch into<br />
AC current mode. With the clamp of the EazyTester, conductors<br />
upto 27 mm can be measured. The compact design makes the<br />
EasyTester easy in use and transport. The LCD-display, including<br />
Low-Battery indicator, is presenting all measured values clearly.<br />
Features<br />
•<br />
•<br />
•<br />
Automatic test sequence<br />
AC / DC Voltage, Resistance and Current measurement<br />
Hold function<br />
Including<br />
+ Batteries<br />
+ Manual<br />
Testleads<br />
Specifications<br />
Recommended accessories<br />
EVH-I holster<br />
626 000 620<br />
see page 25<br />
Bag EV<br />
626 000 483<br />
see page 25<br />
Function<br />
Range<br />
Voltage detection 1,3 – 600 V AC /<br />
1,8 – 600 V DC<br />
Current<br />
Resistance<br />
Specifications<br />
Max. diameter conductor<br />
Continuity<br />
Auto Power Off<br />
Supply<br />
IP-Protection<br />
Overvoltage category<br />
0,6 - 400 A AC<br />
0 - 2000 Ω<br />
27 mm.<br />
< 25 Ω<br />
30 min.<br />
1 x 9V LR61 battery<br />
IP40<br />
CAT III / 600V<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
188 x 67 x 41 mm.<br />
± 265 gram (incl. battery)<br />
22<br />
www.nieaf-smitt.nl
Test tools<br />
EazyPhase<br />
Article number: 626 005 036<br />
Phase / Motor Rotation Tester<br />
The EasyPhase is a simple 3-in-1 Test Tool for indication of<br />
phase rotation, indication of an open phase and field rotation<br />
indication of motors. The tester is ideal for installing conveyor<br />
lines, pump systems and interconnected drivers.<br />
The tester is battery operated and is supplied with leads<br />
(red, yellow and blue), alligator clamps and vinyl bag.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
Phase Rotation<br />
Indication of open phase<br />
Rotation direction of motors indication<br />
Battery operated<br />
Including<br />
Test leads and<br />
alligator clamps<br />
Bag<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Specifications<br />
Voltage range AC / DC<br />
Frequency<br />
Power consumption<br />
Supply<br />
Overvoltage category<br />
100 – 600 V AC<br />
45 - 70 Hz<br />
Approx. 7mA at phase<br />
rotation and approx.<br />
14mA at motor rotationw<br />
DC 9 V Battery<br />
CAT III 600V<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
153 x 72 x 35 mm.<br />
± 180 gram<br />
23<br />
www.nieaf-smitt.nl
Test tools<br />
Linespotter<br />
Article number: 626 000 553<br />
Linespotter<br />
The LineSpotter is a detection device, designed to locate cables<br />
and metal plumbing in walls, floors or ceilings and to identify<br />
fuses/mcb’s.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Tracing of cables in walls, ceilings, floors or ground till 20 cm<br />
Indication under live and not connected situations<br />
Location of cable interruptions or short circuits<br />
Location of hidden sockets or distribution boxes<br />
Locating fuses and assignment to circuits<br />
Determine individual wires in a bundle<br />
Tracing of plumbing or other conductive loops by clamp<br />
Special clamp for high accuracy by determination of fuses<br />
The principle of the instrument is based on a transmitter and a receiver.<br />
The transmitter is sending a signal of 10,6 kHz, which can be traced or<br />
located with the receiver. The receiver can be adjusted into three sensitivity<br />
modes; low, middle and high. The additional trimmer can do the finetuning.<br />
Including<br />
Test leads Test probes Alligator clamps<br />
+ Batteries<br />
+ Manual<br />
Bag<br />
Specifications<br />
Recommended accessories<br />
Current clamp adapter<br />
626 000 309<br />
see page 25<br />
Mini current clamp adapter<br />
626 000 637<br />
see page 25<br />
Selective probe<br />
626 000 654<br />
see page 25<br />
Function<br />
Range<br />
Transmitter<br />
Batteries<br />
4 x AA battery (1,5V)<br />
Low battery indication<br />
yes<br />
Dimensions<br />
80 x 50 x 150 mm.<br />
Weight<br />
± 280 gram<br />
Specifications<br />
Receiver<br />
Batterie<br />
1 x PP3 battery (9V)<br />
Low battery indication<br />
yes<br />
Dimensions<br />
45 x 45 x 180 mm.<br />
Weight<br />
± 150 gram<br />
Standard EN 61010-1<br />
Signal<br />
10,6 kHz<br />
Average injected current 1A<br />
24<br />
www.nieaf-smitt.nl
Accessories<br />
Accessories for test tools<br />
Blue holster<br />
(for EazyAmp, EazyVolt series<br />
and EazyTester)<br />
article number:<br />
626 000 620<br />
Blue protective holster for<br />
EasyAmp, EazyVolt I & II,<br />
EazyTester<br />
Bag<br />
(for EazyAmp, EazyVolt series<br />
and EazyTester)<br />
article number:<br />
626 000 483<br />
torage bag for<br />
EazyAmp, EazyVolt I & II,<br />
EazyTester<br />
Test lead<br />
(with 2 mm probe)<br />
article numbers:<br />
626 006 000 (red)<br />
626 006 001 (black)<br />
probe.<br />
Selective probe<br />
(for Linespotter)<br />
article number:<br />
626 000 654<br />
Alligator clamps 2 mm<br />
article numbers:<br />
626 006 002 (red)<br />
626 006 003 (black)<br />
EazyPhase test leads<br />
article number:<br />
626 005 037<br />
Probetips<br />
(for EazyVolt series)<br />
article number:<br />
626 006 024<br />
Probetip adapters G38<br />
(for EazyVolt series)<br />
article number:<br />
626 006 028<br />
Current clamp adapter<br />
article number:<br />
626 000 309<br />
Mini current clamp adapter<br />
article number:<br />
626 000 637<br />
25<br />
www.nieaf-smitt.nl
Notes<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
26<br />
www.nieaf-smitt.nl
Environmeters<br />
Measuring non-electrical values or better called environmental<br />
values can be of great importance or influence in many industrial<br />
circumstances. Examples of such values are temperature or relative<br />
humidity. Situations, in which such values can be important, are<br />
working environments, utility etc.<br />
Other values are light- or sound level. The light level for example<br />
is important to measure at emergency exits. Nieaf-Smitt offers<br />
you a wide range of environmeters, which are easy to use and<br />
present you the measurements clearly.<br />
27<br />
www.nieaf-smitt.nl
Environmeters<br />
Environmeters<br />
In answer to the need for measuring non-electrical values, Nieaf-Smitt presents seven different testers<br />
within this program.<br />
For measuring temperature levels, five different meters are available. Whether you need to measure<br />
with infrared or a sensor, Nieaf-Smitt offers you the most easy to handle meters in the market.<br />
New in the program is the NI TH183. This compact and simple meter offers the user to measure both<br />
temperature and relative humidity at the same time.<br />
Selection diagram<br />
NI T880 NI T883 NI T82 NI TH183 NI L204 NI S102 NI T8820<br />
Temperature<br />
• • • • •<br />
Infrared<br />
• •<br />
Range -50˚- 280˚C -50˚- 700˚C -200˚- 280˚C -20˚- 60˚C -20˚- 1400˚C<br />
Lux<br />
• •<br />
Rel. Humidity<br />
• •<br />
Sound level<br />
• •<br />
Auto Power Off<br />
• • • • • • •<br />
Hold function<br />
• • • • • • •<br />
LCD Backlight<br />
• • • •<br />
Low Battery indication<br />
• • • • • • •<br />
Battery 1 X 9V 1 X 9V 1 X 9V 1 X 9V 1 X 9V 1 X 9V 1 X 9V<br />
Page number 29 30 31 34 32 33 35<br />
28<br />
www.nieaf-smitt.nl
Environmeters Test tools<br />
NI T880<br />
Article number: 626 000 591<br />
Infra-red thermometer<br />
The infrared thermometer NI T880 is a highly compact<br />
instrument with an ergonomic grip and trigger button.<br />
This meter is one of the most compact available on the market.<br />
The NI T880 can measure temperatures without contact.<br />
A laser pointer for indication of the measuring spot is included<br />
within the instrument and can separately be switched on / off.<br />
Features<br />
• Temperature range -50 … 280°C / -58 … 536°F<br />
• Class II laserproduct<br />
• LCD Backlight<br />
• Auto power off<br />
• Data Hold<br />
Including<br />
Bag<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function Range Accuracy<br />
Temperature measurement -50 … 280°C /<br />
-58 … 536°F<br />
± 2°C<br />
Laser wave length 630 ~ 670 nm ± 2%<br />
Specifications<br />
Auto Power Off<br />
Laser pointer<br />
after 7 seconds<br />
output
Environmeters<br />
NI T883<br />
Article number: 626 000 596<br />
Infrared Thermometer<br />
The NI T883 InfraRed thermometer has the same functions as the<br />
NI T880, with the only difference of a larger measuring range and<br />
a more accurate scale. The NI T883 can measure temperatures<br />
from -50 o C ... 700 o C<br />
Features<br />
• Temperature range -50 ... 700 o<br />
C /-58 … 1292°F<br />
• LCD Backlight<br />
• Class 2 laserproduct<br />
• Auto power off<br />
• Up to 700˚C.<br />
Including<br />
Bag<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function Range Accuracy<br />
Temperature measurement -50 … 700°C /<br />
-58 … 1292°F<br />
± 2°C<br />
Laser wave length 630 ~ 670 nm ± 2%<br />
Specifications<br />
Auto Power Off<br />
Laser pointer<br />
after 7 seconds<br />
output
Environmeters Test tools<br />
NI T82<br />
Article number: 626 000 592<br />
Thermometer<br />
The thermometer NI T82 is a practical instrument for measuring one<br />
or two temperature levels. As soon as the temperature probes are<br />
connected, the measured value(s) will be displayed.<br />
In case of two connected probes, the differential between<br />
measured temperatures, T1 and T2 can be indicated.<br />
The thermometer is suitable for type K and type J probes,<br />
to be selected on the instrument.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
˚C and ˚F<br />
Thermocouple J and K<br />
Min – Max hold<br />
Auto Power Off<br />
Differential measurement<br />
Data Hold<br />
Including<br />
Bag<br />
Thermocouple<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function Range Accuracy<br />
Temperature measurement<br />
-200 … 1370°C - type K<br />
-200 … 1050°C - type J<br />
± (0,05%<br />
± 0,7°C)<br />
Specifications<br />
Auto Power Off<br />
Supply<br />
Resolution<br />
20 minutes<br />
1x 9V battery<br />
0,1°C<br />
Standard EN 61326-1<br />
Dimensions<br />
Weight<br />
130 x 56 x 38 mm.<br />
± 170 gram<br />
31<br />
www.nieaf-smitt.nl
Environmeters<br />
NI L204<br />
Article number: 626 000 593<br />
Lux meter<br />
The compact shaped digital light meter NI L204 is a user friendly<br />
instrument with integrated sensor. The meter can be controlled<br />
by one hand.<br />
The measured value is indicated in Lux or Fc (Footcandles)<br />
The maximum range of 200.000 Lux or 20.000 Fc, makes it<br />
a versatily meter that can be used in many situations.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Lux and FC, max range 200.000 lux or 20.000 Fc<br />
Max Hold<br />
Auto Power Off<br />
Low battery indication<br />
Data Hold<br />
Including<br />
Bag<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function Range Accuracy<br />
Light measurement<br />
200, 2.000, 20.000, 200.000 Lux<br />
20, 200, 2.000, 20.000 Fc<br />
± 3%<br />
Specifications<br />
Supply<br />
Sampling rate<br />
1x 9V battery<br />
2,5 times per second<br />
Standards Designed for pollution degree 2,<br />
according JISC 1609 and CNS 5119<br />
A class specifications<br />
Dimensions<br />
Weight<br />
170 x 55 x 38 mm.<br />
± 250 gram<br />
32<br />
www.nieaf-smitt.nl
Environmeters Test tools<br />
NI S102<br />
Article number: 626 000 594<br />
Soundlevel meter<br />
The NI S102 is a handheld compact sound level meter with<br />
automatic ranging (LO/MED/HI). Because of the integrated<br />
sensor/probe, the instrument can be used with one hand.<br />
On demand, the sound level meter can be switched between<br />
slow or fast reading and A of C frequency.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Automatic ranging<br />
LCD Backlight<br />
Min – Max hold<br />
Auto Power Off<br />
Slow and fast reading<br />
Analogue DC output<br />
Including<br />
Bag<br />
Sponge<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function Range Accuracy<br />
Soundlevel measurement<br />
LO: 30 ~ 80 dB<br />
MED: 50 ~ 100 dB<br />
HI: 80 ~ 130 dB<br />
± 1,5 dB (ref<br />
94dB@1KHz)<br />
Specifications<br />
Auto Power Off<br />
Supply<br />
Resolution<br />
Frequency<br />
20 minutes<br />
1x 9V battery<br />
0,1 dB<br />
A/C<br />
Standards IEC651 Type 2, ANSI S1.4 Type 2<br />
Dimensions<br />
Weight<br />
280 x 80 x 32 mm.<br />
± 300 gram<br />
33<br />
www.nieaf-smitt.nl
Environmeters<br />
NI TH183<br />
Article number: 626 000 589<br />
Temperature and Humidity meter<br />
The NI TH183 is a temperature- and humiditymeter in one.<br />
It is easy to check a room meets it’s standard.<br />
The meter measures up to 60˚C. Relative Humidity can be measured<br />
to 99,9% RH. The NI TH183 has a memory which gives the user the<br />
opportunity to analyse the results for measurements over a longer<br />
period.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
Capacitive sensor<br />
LCD Backlight<br />
Min / Max Hold<br />
Wet Bulb<br />
Including<br />
Bag<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Function Range Accuracy<br />
Temperature measurement -20 … 60°C /<br />
-4 … 140°F<br />
± 0,8°C/<br />
± 1,5°F<br />
Humidity measurement 1,0% … 99,9% RH ± 2,5% for 30 … 80%<br />
Specifications<br />
Supply<br />
Dimensions<br />
Weight<br />
1 x 9V<br />
200 x 55 x 38 mm<br />
165 gram<br />
34<br />
www.nieaf-smitt.nl
Environmeters Test tools<br />
NI T8820<br />
Article number: 626 000 595<br />
4 - in -1 environment meter<br />
The NI T8820 is a complete 4-in-1 Environment Meter for measuring<br />
light (Lux), temperature (°C/°F), humidity (RH) and sound level (dB).<br />
Despite this variety of functions the instrument is compact and truly<br />
handheld.<br />
The sensor for sound level measurement is integrated in the<br />
housing and the sensor for humidity measurement is a disconnectable<br />
probe. The temperature probe (type K) and the light<br />
meter sensor are separately connectable to the housing of the<br />
instrument.<br />
Features<br />
•<br />
•<br />
•<br />
4 – in – 1 • Data Hold<br />
Type K temperature probe • Manual selection<br />
MAX Hold<br />
• Auto Power Off<br />
Including<br />
Bag<br />
Thermo couple<br />
Sponge<br />
+ Batteries<br />
+ Manual<br />
Light sensor<br />
Specifications<br />
Function Range Resolution Accuracy<br />
Light/Lux 20, 200, 2.000, 1 lux + (5%<br />
rdg+10dgt)<br />
20.000 lux (reading x10)<br />
Temperature -20 ... 1.400°C /<br />
-4.0 ... 200.0°F<br />
0,1 / 1°C + (3,5% rdg+2°C)<br />
Humidity 25 ... 95% RH 0,1% RH + 5% RH<br />
Sound<br />
A LO (low) 35 - 100 dB 0,1 dB + 3,5 dB<br />
B HI (high)<br />
C LO (low)<br />
C HI (high)<br />
65 - 130 dB<br />
35 - 100 dB<br />
65 - 130 dB<br />
Specifications<br />
Supply<br />
1 x 9V<br />
Dimensions 252 x 64 x 32,5 mm<br />
Weight<br />
± 330 gram<br />
35<br />
www.nieaf-smitt.nl
Accessories<br />
Accessories for environmeters<br />
Thermo couple type K<br />
(for NI T82 and NI T8820)<br />
article number:<br />
626 000 007<br />
Thermocouple type K for NI<br />
T82 and NI T8820<br />
Sponge<br />
(for NI S102)<br />
article number:<br />
626 006 026<br />
Sponge for NI S102<br />
Lid<br />
(for NI L204)<br />
article number:<br />
626 006 025<br />
Lid for NI L204<br />
36<br />
www.nieaf-smitt.nl
Digital Multimeters<br />
Since its invention, the multimeters is a vital instrumenth for its<br />
users and has been developed logically from analogue indicator to<br />
an accurate (digital) measuring instrument with many functions.<br />
Many integrated functions make these versatile meters suitable<br />
for different markets and users. The instruments for instance<br />
can be used for measuring electronics, electrical installations,<br />
machinery, appliances, etc…<br />
37<br />
www.nieaf-smitt.nl
Digital Multimeters<br />
Digital multimeters<br />
Nieaf-Smitt BV is one of the first manufacturers of multimeters and therefore very experienced in this<br />
market. The range of products is build up by a ‘simple’ and basic multimeter for service and repair<br />
activities. Followed by more sophisticated meters with True RMS, graphic display and even computer<br />
interface for pc-compatibility.<br />
Selection diagram<br />
Eazy MM NI 61 NI 62 NI 72 NI 77 NI 79C NI 98II NI 99II NI 305R<br />
Display resolution 5000 d 2000 d 2000 d 6000 d 4000 d 4000 d 4000 d 4000 d 4000 d<br />
Voltage AC<br />
• • • • • • • • •<br />
Voltage DC<br />
• • • • • • • • •<br />
Resistance<br />
• • • • • • • • •<br />
Current AC<br />
• • • • • • •<br />
Current DC<br />
• • • • • • •<br />
Continuity<br />
• • • • • • • • •<br />
Frequency<br />
• • • • • • • •<br />
Capacitance<br />
• • • • • • • •<br />
Peak Hold<br />
• •<br />
Data Hold<br />
• • • • • • • • •<br />
Min/Max Hold<br />
• • • • •<br />
Backlight<br />
• • •<br />
Battery 2 x 1,5V 2 x 1,5V 2 x 1,5V 1 x 9V 1 x 9V 2 x 1,5V 1 x 9V 1 x 9V 1 x 9V<br />
Auto Power-off<br />
• • • • • • • • •<br />
• •<br />
Non Contact<br />
Voltage Detection<br />
Protection holster<br />
• • • • • • • •<br />
Stand<br />
• • • • • • • •<br />
Hanging kit<br />
• •<br />
Hold<br />
• • • • • • • • •<br />
Temperature<br />
• •<br />
Analog bargraph<br />
• • • • •<br />
PC link<br />
• •<br />
True RMS<br />
• • • • • •<br />
Weight 115 gr 320 gr 320 gr 380 gr 380 gr 380 gr 460 gr 460 gr 685 gr<br />
Overvoltage<br />
Category<br />
CAT III<br />
600V<br />
CAT III<br />
600V<br />
CAT III<br />
600V<br />
CAT III<br />
600V<br />
CAT III<br />
600V<br />
CAT III<br />
600V<br />
CAT III<br />
600V<br />
CAT IV<br />
600V<br />
CAT III<br />
600V<br />
Art. no 626 005 039 626 005 041 626 005 042 626 005 029 626 005 030 626 005 031 626 005 015 626 005 016 626 005 005<br />
Page number 39 40 41 42 43 44 45 46 47<br />
38<br />
www.nieaf-smitt.nl
Digital Multimeters Test tools<br />
Eazy MM<br />
Article number: 626 005 039<br />
Multimeter<br />
Topclass, pocket size functional digital multimeter. Due to its<br />
format its ideal to be used everywhere. The Eazy MM is included<br />
in a leather pouch.<br />
• AC / DC Voltage<br />
• Resistance<br />
• Diode test<br />
• Continuity<br />
• Capacitance<br />
• Frequency<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
Data Hold<br />
Autoranging<br />
1 meter drop proof<br />
Large LCD display<br />
Including<br />
+ Batteries<br />
+ Manual<br />
+ Leather protection shell<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection 0,1mV ... 600V AC / DC ± 0,6%<br />
Resistance<br />
Frequency<br />
Capacity<br />
0,1 Ω … 40MΩ<br />
1mHz … 5 mHz<br />
10ρF … 100 μF<br />
Specifications<br />
Display resolution<br />
Drop proof<br />
5000d<br />
4 ft.<br />
Over voltage category CAT II 600V/CAT III 300V<br />
Supply 2x 1,5V battery (button size GPA 76)<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
56 x 112 x 12mm<br />
115 gram<br />
39<br />
www.nieaf-smitt.nl
Digital Multimeters<br />
NI 61<br />
Article number: 626 005 041<br />
Digital multimeter<br />
The NI 61 digital multimeter is a user friendly, compact and<br />
ergonomic multimeter. The multimeter is excellent for service<br />
applications and contains several functions. The rugged housing<br />
has a built-in stand (for work bench application).<br />
The multimeter is equipped with a Voltsense function, which<br />
provides the user the opportunity to get an indication whether<br />
voltage is present or not, without making contact with the<br />
selected object.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Voltsense<br />
AC/DC voltage<br />
Resistance<br />
Hold function<br />
Compact housing<br />
Including<br />
Alligator clamp<br />
Test leads<br />
+ Batteries<br />
+ Manual<br />
Specifications<br />
Recommended accessories<br />
Bag<br />
626 006 033<br />
See page 48-49<br />
Function Range Accuracy<br />
Voltage detection<br />
Resistance<br />
Specifications<br />
0,1mV ... 750V AC<br />
0,1mV … 1000V DC<br />
0,1 Ω … 20MΩ<br />
± 0,5%<br />
Display resolution<br />
Over voltage category<br />
2000d<br />
CAT II 1000V/CAT III 600V<br />
Supply<br />
2x 1,5V (button size battery)<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
74 x 156 x 44mm<br />
320 gram (incl. battery)<br />
40<br />
www.nieaf-smitt.nl
Digital Multimeters Test tools<br />
NI 62<br />
Article number: 626 005 042<br />
Digital multimeter<br />
The NI 62 digital multimeter is a user friendly, compact and<br />
ergonomic multimeter. The multimeter is excellent for service<br />
applications, contains several functions and is easy to use.<br />
The multimeter is equipped with a Voltsense ability, which<br />
provides the user the opportunity to get an indication whether<br />
voltage is present or not, without making contact with the<br />
selected object. Besides Non-Contact Voltage Detection the NI<br />
62 is able to measure AC/DC voltage, current up to 10A AC/DC<br />
and resistance.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Voltsense<br />
AC / DC Voltage<br />
AC / DC Current<br />
Resistance<br />
Min / Max Hold<br />
Frequency measurement<br />
Diode test<br />
Including<br />
+ Batteries<br />
+ Manual<br />
Alligator clamp<br />
Test leads<br />
Specifications<br />
Function Range Accuracy<br />
Recommended accessories<br />
Bag<br />
626 006 033<br />
See page 48-49<br />
Voltage detection<br />
0,1mV ... 750V AC<br />
0,1mV … 1000V DC<br />
Current 1mA … 10A AC / DC ± 0,5%<br />
Frequency<br />
Resistance<br />
Capacity<br />
Specifications<br />
1Hz … 20MHz<br />
0,1 Ω … 20MΩ<br />
1ρF … 2mF<br />
Over voltage category<br />
Display resolution<br />
CAT II 1000V / CAT III 600V<br />
2000d<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
Supply<br />
74 x 156 x 44mm<br />
320 gram (incl. battery)<br />
2 x 1,5V (button size battery)<br />
41<br />
www.nieaf-smitt.nl
Digital Multimeters<br />
NI 72<br />
Article number: 626 005 029<br />
True RMS digital multimeter<br />
The NI 72 is a compact True RMS multimeter with a wide range of<br />
possibilities. This makes the NI 72 a perfect meter for users who<br />
want just that little bit extra.<br />
The utility case has a removable protective holster with built-in<br />
stand (for workbench applications).<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
AC / DC Voltage<br />
AC / DC Current<br />
Resistance<br />
Capacitance<br />
Min – Max Hold<br />
Data Hold<br />
True RMS<br />
Including<br />
+ Protective holster<br />
+ Manual<br />
+ Batteries<br />
Alligator clamp<br />
Test leads<br />
Specifications<br />
Function Range Accuracy<br />
AC Voltage detection 600mV ... 750V AC ( ±0,9% + 5d)<br />
DC Voltage detection 600mV ... 1000V DC (± 0,5% + 2d)<br />
Recommended accessories<br />
Bag<br />
626 006 033<br />
See page 48-49<br />
AC Current 6A, 10A AC (± 1,5% + 5d)<br />
DC Current 600uA, 6mA, 6A, 10A DC (± 0,7% + 2d)<br />
Resistance 400 Ω … 40MΩ (± 0,7% + 2d)<br />
Frequency 40kHz … 4oMHz (±0,01% + 1d)<br />
Capacitance 4nF … 4mF (± 0,9% +2d)<br />
Specifications<br />
Over Voltage Category CAT II 1000V / CAT III 600V<br />
Display resolution 6.000d<br />
Supply<br />
1 x 9V battery<br />
Standard EN 61010-1<br />
Dimensions<br />
164 x 82 x 44 mm<br />
Weight<br />
± 380 gram<br />
42<br />
www.nieaf-smitt.nl
Digital Multimeters Test tools<br />
NI 77<br />
Article number: 626 005 030<br />
True RMS digital multimeter<br />
The NI 77 is a True RMS digital multimeter with a various number<br />
of functions and a quick processor. Ideal is the ‘analogue’ bargraph<br />
which provides a direct indication whether there is a measurement<br />
or not. The meter is very easy in use, with an ergonomic rotary<br />
switch to easily select a function. The clear and large LCD screen<br />
helps the user to get to a result on a fast and safe way.<br />
The utility case has a removable protective holster with built-in<br />
stand (for workbench applications).<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
AC / DC Voltage<br />
AC / DC Current<br />
True RMS<br />
Auto / Manual ranging<br />
Peak Hold<br />
‘Analogue’ Bargraph<br />
Including<br />
+ Protective holster<br />
+ Batteries<br />
+ Manual<br />
Alligator clamp<br />
Test leads<br />
Specifications<br />
Function Range Accuracy<br />
AC Voltage detection 400mV ... 750V AC ( ±1,2% + 5d)<br />
DC Voltage detection 400mV ... 1000V DC (± 0,5% + 2d)<br />
Recommended accessories<br />
Bag<br />
626 006 033<br />
See page 48-49<br />
AC Current 10A AC (± 1,5% + 5d)<br />
DC Current 400uA, 4mA, 10A DC (± 1,0% + 2d)<br />
Resistance 400 Ω … 40MΩ (± 0,7% + 2d)<br />
Frequency 40kHz … 40MHz (±0,01% + 1d)<br />
Capacitance 4nF … 4mF (± 1,9% + 8d)<br />
Specifications<br />
Over Voltage Category CAT II 1000V / CAT III 600V<br />
Display resolution 4.000d<br />
Supply<br />
1 x 9V Battery<br />
Standard EN 61010-1<br />
Dimensions<br />
164 x 82 x 44 mm<br />
Weight<br />
± 380 gram<br />
43<br />
www.nieaf-smitt.nl
Digital Multimeters<br />
NI 79C<br />
Article number: 626 005 031<br />
True RMS digital multimeter<br />
The NI 79C is a True RMS digital multimeter with a clear display and<br />
‘analogue’ bargraph. One of the unique features is the communication<br />
with the pc. This offers the user the possibility to analyse the measurements<br />
done over a certain amount of time. The utility case has a removable<br />
protective holster with built-in stand (for workbench applications).<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
True RMS<br />
PC Communication<br />
Min – Max Hold<br />
LCD Backlight<br />
Continuity and diode test<br />
Auto power off<br />
Auto or manual ranging<br />
LCD backlight display<br />
Including<br />
Alligator clamp<br />
RS232 cable<br />
Software<br />
Test leads<br />
Specifications<br />
+ Protective holster<br />
+ Battery<br />
+ Manual<br />
Function Range Accuracy<br />
AC Voltage detection 400mV ... 750V AC ( ±1,2% + 5d)<br />
DC Voltage detection 400mV ... 1000V DC (± 0,5% + 2d)<br />
Recommended accessories<br />
Bag<br />
626 006 033<br />
See page 48-49<br />
AC Current 10A AC (± 1,5% + 5d)<br />
DC Current 400uA, 4mA, 10A DC (± 1,0% + 2d)<br />
Resistance 400 Ω … 40MΩ (± 0,7% + 2d)<br />
Frequency 40kHz … 40MHz (±0,01% + 1d)<br />
Capacitance 4nF … 4mF (± 1,9% + 8d)<br />
Specifications<br />
Over Voltage Category CAT II 1000V / CAT III 600V<br />
Display resolution 4.000d<br />
Supply<br />
1 x 9V battery<br />
Standard EN 61010-1<br />
Dimensions<br />
164 x 82 x 44 mm<br />
Weight<br />
± 380 gram<br />
44<br />
www.nieaf-smitt.nl
Digital Multimeters Test tools<br />
NI 98II<br />
Article number: 626 005 030<br />
True RMS digital multimeter<br />
Because of the integrated True RMS technique, the NI 98II is a very<br />
accurate, professional and excellent multimeter. Including the<br />
90-series characteristics, such as orderly display with bargraph<br />
and sturdy and ergonomical shape of the housing, the instrument<br />
is very user friendly. The utility case has a removable protective<br />
holster with built-in stand (for workbench applications).<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
True RMS<br />
AC / DC Voltage<br />
AC / DC current<br />
Resistance<br />
RPM<br />
Auto ranging<br />
‘Analogue’ bargraph<br />
Including<br />
Alligator clamp<br />
Test leads<br />
Hanging kit<br />
+ Protective holster<br />
+ Battery<br />
+ Manual<br />
Specifications<br />
Function Range Accuracy<br />
AC Voltage detection 400mV ... 750V AC ( ±1,3% + 5d)<br />
DC Voltage detection 400mV ... 1000V DC (± 0,25% + 1d)<br />
Recommended accessories<br />
Bag<br />
626 006 016<br />
See page 48-49<br />
AC Current 40mA, 400mA, 10A AC (± 2,08% + 5d)<br />
DC Current 40mA, 400mA, 10A AC (± 0,6,% + 2d)<br />
Resistance 400 Ω … 40MΩ (± 0,4% + 3d)<br />
Frequency 4kHz … 4MHz (±0,01% + 1d)<br />
Capacitance 4nF … 40mF (± 2,0% + 5d)<br />
Specifications<br />
Over Voltage Category CAT II 1000V / CAT III 600V<br />
Display resolution 4.000d<br />
Supply<br />
1 x 9V battery<br />
Standard EN 61010-1<br />
Dimensions<br />
190 x 95 x 44mm<br />
Weight<br />
± 460 gram<br />
45<br />
www.nieaf-smitt.nl
Digital Multimeters<br />
NI 99II<br />
Article number: 626 005 016<br />
Complete multimeter<br />
The most complete multimeter of the 90-series is the NI 99II.<br />
This True RMS multimeter is a merge of user friendly navigation,<br />
accuracy and quality. Because of its many functions, for example<br />
temperature measurement, the NI 99II is an excellent and<br />
complete digital multimeter. The utility case has a removable<br />
protective holster with built-in stand (for workbench applications).<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
LCD Backlight<br />
Capacitance<br />
Temperature<br />
RPM<br />
Diode and continuity test<br />
Auto ranging<br />
‘Analogue’ bargraph<br />
Including<br />
Alligator clamps<br />
Hanging kit Temperature adaptor<br />
+ Protective holster<br />
+ Battery<br />
+ Manual<br />
Test leads<br />
Specifications<br />
Function Range Accuracy<br />
AC Voltage detection 400mV ... 750V AC ( ±1,3% + 5d)<br />
DC Voltage detection 400mV ... 1000V DC (± 0,02% + 2d)<br />
AC Current 40mA, 400mA, 10A AC (± 2,08% + 8d)<br />
Recommended accessories<br />
Bag<br />
626 006 016<br />
See page 48-49<br />
DC Current 40mA, 400mA, 10A AC (± 0,6,% + 4d)<br />
Resistance 400 Ω … 40MΩ (± 0,4% + 3d)<br />
Frequency 4kHz … 4MHz (±0,01% + 1d)<br />
Capacitance 4nF … 40mF (± 2,0% + 5d)<br />
Temperature -20 … +800oC (± 2% + 2oC)<br />
Specifications<br />
Over Voltage Category CAT II 1000V / CAT III 600V<br />
Display resolution 40.000d<br />
Supply<br />
1 x 9V battery<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
210 x 100 x 55 mm<br />
± 685 gram<br />
46<br />
www.nieaf-smitt.nl
Digital Multimeters Test tools<br />
NI 305R<br />
Article number: 626 005 030<br />
Exeptional multimeter<br />
The NI 305R is an exceptional complete True RMS multimeter with the highest<br />
accuracy in the multimeter range of Nieaf-Smitt, this in combination<br />
with versatile functions and user-friendly software makes the NI 305R<br />
a meter suitable for demanding users.<br />
The multimeter has internal memory to save results, which can be analysed<br />
when transported to the computer. The utility case has a removable<br />
protective holster with built-in stand (for workbench applications).<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
True RMS<br />
LCD Backlight<br />
Frequency<br />
Capacitance<br />
Temperature<br />
• RPM<br />
• Diode and continuity test<br />
• Auto ranging<br />
• ‘Analogue’ bargraph<br />
Including<br />
RS232 cable<br />
Alligator clamps<br />
Specifications<br />
Software<br />
Test leads<br />
Thermocouple + adaptor<br />
+ Hanging kit<br />
+ Battery<br />
+ Protective holster<br />
+ Manual<br />
Function Range Accuracy<br />
AC Voltage detection 400mV ... 750V AC ( ±0,7% +5d)<br />
DC Voltage detection 400mV ... 1000V DC (± 0,06% +2d)<br />
AC Current 40mA … 10A AC (± 0,8% +8d)<br />
Recommended accessories<br />
Bag<br />
626 006 016<br />
See page 48-49<br />
DC Current 40mA … 10A DC (± 0,2% +4d)<br />
Resistance 400 Ω … 40MΩ (± 0,3% +2d)<br />
Frequency 400Hz … 4MHz (±0,01% + 1d)<br />
Capacitance 400nF … 10mF (± 0,9% +2d)<br />
Temperature -200 … +1300oC (± 1% +2oC)<br />
Specifications<br />
Over Voltage Category<br />
CAT II 1000V / CAT III 600V<br />
Display resolution 40.000d<br />
Supply<br />
1 x 9V battery<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
210 x 100 x 55 mm<br />
± 685 gram<br />
47<br />
www.nieaf-smitt.nl
Accessories<br />
Accessories for multimeters<br />
Bag<br />
article number:<br />
626 006 016<br />
Bag<br />
article number:<br />
626 006 033 (red)<br />
70 series<br />
Holsters<br />
article numbers:<br />
626 006 027 (NI 70 series)<br />
626 000 009 (NI 90 series)<br />
626 000 010 (NI 305R)<br />
70 series<br />
Test leads<br />
(with 2 mm probe)<br />
article numbers:<br />
626 006 000 (red) (red)<br />
626 006 001 (black)<br />
Test leads<br />
(1m)<br />
article numbers:<br />
560 410 027 (red) (red)<br />
560 410 028 (black)<br />
Test leads<br />
(1,5 m Stackable )<br />
article numbers:<br />
560 410 033 (red) (red)<br />
560 410 034 (black)<br />
Alligator clamps<br />
(2 mm)<br />
article numbers:<br />
626 006 002 (red)<br />
626 006 003 (black)<br />
Test lead, 1 meter<br />
Alligator clamp<br />
(4 mm)<br />
article number:<br />
560 010 092<br />
ackable test lead,<br />
1,5 meter<br />
Fuses<br />
(for NI 305R)<br />
article numbers:<br />
626 006 017 (15A / 600V)<br />
626 006 018 (1A / 600V)<br />
10A/500V)<br />
Fuses for NI 305R ligator<br />
clamp, 2 mm.<br />
Fuses<br />
626 006 019 (1A / 500V)<br />
626 006 020 (16A 500V)/500V)<br />
626 006 023 (10A / 500V)<br />
48<br />
www.nieaf-smitt.nl
Accessories Test tools<br />
Accessories for multimeters<br />
Probe<br />
(2 mm, short)<br />
article number:)<br />
626 006 004<br />
Probe flexible<br />
article number:<br />
626 006 021<br />
Probe, flexible<br />
Probe, short, 2 mm.<br />
Connectors<br />
(4 mm touch proof)c<br />
article numbers:<br />
626 006 005 (red) (red)<br />
626 006 006 (black)<br />
tor, 4 mm.<br />
Thermocouple<br />
article number:<br />
626 006 007<br />
Thermocouple type K<br />
RS232 cable<br />
article number:<br />
626 006 008<br />
RS232 cable for<br />
NI 305R and NI 79C<br />
Hanging kit<br />
article number:<br />
626 005 026<br />
Multimeter hangingkit<br />
Probes<br />
(4 mm)<br />
article numbers:<br />
560 410 029 (red) (red)<br />
560 410 030 (black)<br />
49<br />
www.nieaf-smitt.nl
Notes<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
50<br />
www.nieaf-smitt.nl
Current clamps<br />
Current clamps are evolved into multiple function devices and<br />
are being called multimeters more and more.<br />
The clamps can often be used for measuring AC / DC currents,<br />
AC / DC voltage, resistance, continuity and some even measure power.<br />
The housing of the clamps have been developed strongly in the<br />
past years. In addition to the ergonomic shape, the handy<br />
rotation switch and clear display, some clamps are equipped<br />
with a drop shaped jaw (opening) for optimal measurement.<br />
51<br />
www.nieaf-smitt.nl
Current clamps<br />
Current clamps<br />
The program of current clamps offers a wide range of functions and opportunities. Nieaf <strong>Instruments</strong><br />
offers you 10 current clamps, each with its unique specifications. Whether you need a basic instrument,<br />
or a more advanced model. Even a CAT IV model is now available in our range.<br />
Selection diagram<br />
NI 02 NI 03 NI 1715 NI 30 NI 11 NI 11R NI 12R NI 16R NI 18 PLUS NI 349PR<br />
Display resolution 2000 d 2000 d 3200 d 3999 d 4000 d 4000 d 4000 d 4000 d 6000 3999 d<br />
Current AC<br />
• • • • • • • • • •<br />
Current DC<br />
• • • • • •<br />
Resistance<br />
• • • • • • • • •<br />
Voltage AC<br />
• • • • • • • • •<br />
Voltage DC<br />
• • • • • • • • •<br />
Diode / Continuity<br />
• • • • • • • • •<br />
Frequency<br />
• • • • • • •<br />
Power<br />
• •<br />
Temperature<br />
•<br />
Hold<br />
• • • • • • • • • •<br />
True RMS<br />
• • • • •<br />
Max. jaw opening 30 mm 30 mm 30 mm 25 mm 37 mm 37 mm 45 mm 53 mm 40 mm 55 mm<br />
Overvoltage<br />
Category<br />
CAT III<br />
600 V<br />
CAT III<br />
600 V<br />
CAT III<br />
600 V<br />
CAT III<br />
600 V<br />
CAT III<br />
600 V<br />
CAT III<br />
600 V<br />
CAT III<br />
600 V<br />
CAT IV<br />
600 V<br />
CAT III<br />
600 V<br />
CAT III<br />
600 V<br />
Page number 53 54 55 56 57 58 59 60 61 62<br />
52<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 02<br />
Article number: 626 005 044<br />
Compact current clamp<br />
The NI 02 is by far the smallest current clamp in the range<br />
of Nieaf-Smitt <strong>Instruments</strong>. This clamp provides you the basic<br />
measurement of AC current up to 400A. The small jaw of 30mm<br />
makes it ideal to fit in small situations.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
Data Hold<br />
CAT III 600V<br />
Display 2000d<br />
Max Hold<br />
Including<br />
Bag<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Current 10mA … 400A 2%<br />
Specifications<br />
Display resolution 2000d<br />
Max conductor size 27mm<br />
Max jaw opening 30mm<br />
Over Voltage Category CAT III 600V<br />
Standard IEC 61010-1<br />
Dimensions<br />
56 x 180 x 32mm<br />
Weight<br />
250 gram (incl. battery)<br />
53<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 03<br />
Article number: 626 005 043<br />
Multimeter / current clamp<br />
With the exact same housing as the NI 02, the NI 03 excells in<br />
functionality. With basic measurements as voltage, resistance<br />
and of course current makes it ideal for all-round users.<br />
The basic accuracy of 1% makes it ideal for exact measurements.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Hold function<br />
CAT III 600V<br />
Continuity test<br />
Display 2000d<br />
AC / DC Voltage<br />
Including<br />
Bag<br />
Testleads<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
Current<br />
0,1V … 600V AC<br />
0,1V … 600V DC<br />
0,1 A … 40A AC<br />
40 A … 400A AC<br />
(± 1,5% + 5d)<br />
(± 1,0% +2d)<br />
(±1,9% + 10d)<br />
(± 1,9% + 5d)<br />
Resistance 0,1Ω … 20MΩ (±1,9% +5d)<br />
Specifications<br />
Over Voltage Category CAT III 600V<br />
Display resolution 2000d<br />
Max conductor size 30mm<br />
Max. jaw opening 30mm<br />
Standard EN 61010-1<br />
Dimensions<br />
56 x 188 x 28mm<br />
Weight<br />
225 gram (incl. battery)<br />
54<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 1715<br />
Article number: 626 005 006<br />
Current clamp multimeter<br />
The NI 1715 is a current clamp multimeter combination with a wide<br />
range of functions. The meter is very elegant and compact and is<br />
very user friendly for AC / DC voltage and AC current.<br />
Unique point of the NI 1715 is that it offers the user the functionality<br />
of a current clamp and the functions of a multimeter. It is very easy to<br />
take the jaw off, which leaves a very small multimeter, with terminals<br />
for test leads.<br />
Features<br />
•<br />
•<br />
•<br />
Auto Ranging<br />
Data Hold<br />
Auto Power Off<br />
Including<br />
Alligator clamp Flexible probe 2 mm short probe<br />
Test leads<br />
Bag<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
3,2V … 600V AC<br />
320V … 600V DC<br />
(± 1,7% + 5d)<br />
Current 01A … 300A AC (±1,9% +0,5A)<br />
Resistance 320Ω … 30MΩ (±1,2% + 4d)<br />
Specifications<br />
Over Voltage Category CAT II 600 V<br />
Display resolution 3200d<br />
Max. conductor size 29mm<br />
Max. jaw opening 30mm<br />
Standard EN 61010-1<br />
Dimensions<br />
225 x 72 x 36mm<br />
Weight<br />
± 270 gram (incl. batteries)<br />
55<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 30<br />
Article number: 626 005 020<br />
Compact current clamp<br />
The NI 30 is a very compact AC / DC current clamp, equipped<br />
with the smallest jaw opening. The clamp has accurate<br />
measurement of voltage, current (up to 300A), or resistance.<br />
With a weight of only 205 gram it is easy to handle and use.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
DATA hold<br />
Auto Ranging<br />
Auto Power Off<br />
Zero Button<br />
Including<br />
Bag<br />
Testleads<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
Current<br />
400mV … 600V AC<br />
400mV … 600V DC<br />
40 A … 300A AC<br />
40 A … 300A DC<br />
(± 1,5% + 5d)<br />
(± 0,5% + 2d)<br />
(± 1,0% + 3d)<br />
(± 2,0% + 2d)<br />
Resistance 400Ω … 40MΩ (±0,9% + 3d)<br />
Specifications<br />
Over Voltage Category CAT II 600V / CAT III 300V<br />
Display resolution 3999d<br />
Frequency 20 … 10kHz (±0,5% + 3d)<br />
Max conductor size 22mm<br />
Max. jaw opening 25 mm<br />
Standard EN 61010-1<br />
Dimensions<br />
192 x 66 x 27mm<br />
Weight<br />
± 205 gram<br />
56<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 11<br />
Article number: 626 005 032<br />
Ergonomic current clamp<br />
This elegant shaped, ergonomic current clamp is suitable for<br />
multiple measurements, such as AC currents, voltages, resistance<br />
and frequency. The integrated LCD-display is included with<br />
bargraph and backlight. This allows the user to use the clamp<br />
in dark applications and surroundings.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Min – Max hold<br />
Auto Ranging<br />
Continuity test<br />
Auto power off<br />
Backlight<br />
Including<br />
Bag<br />
Testleads<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
0,1V … 600V AC<br />
0,1V … 600V DC<br />
(± 1,0% + 5d)<br />
(± 0,7% + 2d)<br />
Current 0,1A … 600A AC (± 1,9% + 5d)<br />
Resistance 0,1Ω … 400Ω (±1% + 3d)<br />
Frequency 4kHz … 10kHz (± 0,1% + 2d)<br />
Specifications<br />
Over Voltage Category CAT II 1000V / CAT III 600V<br />
Display resolution 4000d<br />
Max conductor size 35 mm<br />
Max. jaw opening 40 mm<br />
Standard EN 61010-1<br />
Dimensions<br />
220 x 70 x 50mm<br />
Weight<br />
± 360 gram<br />
57<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 11R<br />
Article number: 626 005 033<br />
High accuracy current clamp<br />
The NI 11R is an elegant and ergonomic current clamp, with high<br />
accuracy. The clamp is equal in functionality to the NI 11, except<br />
for the integrated True RMS measurement.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Min – Max hold<br />
Auto Ranging<br />
Continuity test<br />
True RMS<br />
Backlight<br />
Including<br />
Bag<br />
Testleads<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
0,1V … 600V AC<br />
0,1V … 600V DC<br />
(± 1,0% + 5d)<br />
(± 0,7% + 2d)<br />
Current 0,1A … 600A AC (± 1,9% + 5d)<br />
Resistance 0,1Ω … 400Ω (±1% + 3d)<br />
Frequency 4kHz … 10kHz (± 0,1% + 2d)<br />
Specifications<br />
Over Voltage Category CAT II 1000V / CAT III 600V<br />
Display resolution 4000d<br />
Max conductor size 34 mm<br />
Max. jaw opening 40 mm<br />
Standard EN 61010-1<br />
Dimensions<br />
220 x 70 x 50mm<br />
Weight<br />
± 360 gram<br />
58<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 12R<br />
Article number: 626 005 034<br />
Complete current clamp<br />
The complete and versatile current clamp NI 12R is an elegant<br />
and ergonomic shaped instrument. This clamp is suitable for<br />
measuring AC / DC current, voltages, resistance and frequency.<br />
The rotary switch for selection of the appropriate measurements<br />
is easy. The measured values are displayed clearly on the LCDdisplay,<br />
including backlight and bargraph.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
Display / Peak / Min – Max hold<br />
AC / DC Current<br />
Continuity test<br />
Auto ranging<br />
Including<br />
Bag<br />
Testleads<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
Current<br />
0,1V … 600V AC<br />
0,1V … 600V DC<br />
0,1A … 600A AC<br />
0,1A … 600A DC<br />
(± 1,0% + 5d)<br />
(± 0,7% + 2d)<br />
(± 1,9% + 5d)<br />
(± 1,5% + 5d)<br />
Resistance 0,1Ω … 600Ω (±1% + 3d)<br />
Frequency 4kHz … 10kHz (± 0,1% + 2d)<br />
Specifications<br />
Over Voltage Category CAT II 1000V / CAT III 600V<br />
Display resolution 4000d<br />
Max conductor size 35 mm<br />
Max. jaw opening 40 mm<br />
Standard EN 61010-1<br />
Dimensions<br />
235 x 78 x 51 mm<br />
Weight<br />
± 380 gram<br />
59<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 16R<br />
Article number: 626 005 035<br />
True RMS current clamp<br />
The NI 16R is a True RMS current clamp, especially designed<br />
for demanding users. The clamp meter is suitable for measuring<br />
AC / DC currents (up to 1000A), AC / DC voltages, resistance<br />
and frequency.<br />
This sturdy current clamp is approved to measure in CAT IV<br />
environment.<br />
Extra functions of the NI 16R are continuity test and Auto Power<br />
Off. Backlight makes it possible to work in poorly lighted situations.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
Data Hold<br />
Peak Hold<br />
Up to 1000A<br />
LCD Backlight<br />
Including<br />
+ Manual<br />
+ Batteries<br />
Bag<br />
Testleads<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
Current<br />
0,1V … 750V AC<br />
0,1V … 1000V DC<br />
0,1A … 1000A AC<br />
0,1A … 1000A DC<br />
(± 1,0% + 5dgt)<br />
(± 0,7% + 2dgt)<br />
(± 2,9% + 5dgt)<br />
(± 2,9% + 5dgt)<br />
Resistance 0,1Ω … 400Ω (± 1% + 3dgt)<br />
Frequency 1 Hz … 400 Hz (± 0,1% + 2dgt)<br />
Specifications<br />
Over Voltage Category<br />
Display resolution<br />
Max Jaw opening<br />
CAT IV 600V<br />
3999d<br />
53 mm<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
275 x 105 x 51 mm<br />
± 534 gram<br />
60<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 18 plus<br />
Article number: 626 005 038<br />
True RMS current clamp<br />
The NI 18 plus is a very sturdy, high quality multifunctional True<br />
RMS current clamp. The clamp can measure up to 600A AC / DC<br />
and 750V AC / 1000V DC. Other functionalities, like temperature /<br />
Power Factor / Power (Watt) / phase rotation, complete the NI 18<br />
plus as the most allround clamp in the range.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Total Harmonic Distortion<br />
Continuity test<br />
LCD Backlight<br />
Temperature<br />
Inrush current<br />
Including<br />
Bag<br />
Testleads<br />
Thermocouple<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
0,1V … 1000V AC<br />
0,1V … 600V DC<br />
(± 1,0% + 5d)<br />
(± 0,7% + 5d)<br />
Current 0,1A … 600A AC / DC (± 1,5% + 5d)<br />
Resistance 0,1Ω … 20kΩ (±1% + 5d)<br />
Temperature -50˚C … + 1000˚C (±1% + 3˚C)<br />
Frequency 4kHz … 10kHz (± 0,1% + 2d)<br />
Specifications<br />
Effective power 1W … 600kW<br />
Over Voltage Category CAT III 600V<br />
Display resolution 6000d<br />
Max conductor size 35 mm<br />
Max. jaw opening 40 mm<br />
Standard EN 61010-1<br />
Dimensions<br />
235 x 85 x 51 mm<br />
Weight<br />
± 380 gram<br />
61<br />
www.nieaf-smitt.nl
Current clamps<br />
NI 349PR<br />
Article number: 626 005 038<br />
True RMS current clamp<br />
The NI349 is a very sturdy, high quality and multifunctional True<br />
RMS current clamp with a huge measuring range.<br />
This clamp can measure AC current up to 2100A and DC current<br />
up to 2500A.<br />
Whether you are a demanding user or just want to make a simple<br />
measurement, with the easy to use rotary switch you are able to<br />
make this measurement.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Power<br />
Min – Max Hold<br />
Temperature<br />
Com-output<br />
Relative measuring<br />
Continuity<br />
Including<br />
Bag<br />
Testleads<br />
Thermocouple type K<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection<br />
Current<br />
400mV … 600V AC<br />
400mV … 600V DC<br />
0,1A … 2100A AC<br />
0,1A … 2500A DC<br />
(± 1,5% + 5d)<br />
(± 1,5% + 3d)<br />
(± 1,5% + 3d)<br />
(± 1,5% + 3d)<br />
Resistance 0,1Ω … 400Ω (±1% + 2d)<br />
Temperature -50˚C … + 1000˚C (±1% + 3˚C)<br />
Power range 0,01W … 1200kW (± 2,5% +5d)<br />
Specifications<br />
Over Voltage Category CAT III 600V<br />
Display resolution 3999d<br />
Max Jaw opening 55 mm<br />
Standard EN 61010-1<br />
Dimensions<br />
271 x 112 x 36mm<br />
Weight<br />
± 650 gram<br />
62<br />
www.nieaf-smitt.nl
Accessories<br />
Accessories for earth leakage clamps<br />
Bags<br />
article numbers:<br />
626 006 011 (NI 1715)<br />
626 006 012 (NI 30)<br />
626 006 014 (NI 11 series)<br />
Test leads<br />
(with 2 mm probe)<br />
article numbers:<br />
626 006 000 (red) (red)<br />
626 006 001 (black)<br />
70 series<br />
Test leads<br />
(1m)<br />
article numbers:<br />
560 410 027 (red) (red)<br />
560 410 028 (black)<br />
Test leads<br />
(1,5 m Stackable)<br />
article numbers:<br />
560 410 033 (red) (red)<br />
560 410 034 (black)<br />
Alligator clamps<br />
(2 mm)<br />
article numbers:<br />
626 006 002 (red)<br />
626 006 003 (black)<br />
Test lead, 1 meter<br />
Alligator clamp<br />
(4 mm)<br />
article number:<br />
560 010 092<br />
ackable test lead,<br />
1,5 meter<br />
Probe<br />
(2 mm, short)<br />
article number:)<br />
626 006 004<br />
Probe flexible<br />
article number:<br />
626 006 021<br />
Probe, flexible<br />
Probe, short, 2 mm.<br />
Connectors<br />
(4 mm touch proof)<br />
article numbers:<br />
626 006 005 (red) (red)<br />
626 006 006 (black)<br />
tor, 4 mm.<br />
Probes<br />
(4 mm) (<br />
article numbers:<br />
560 410 029 (red) (red)<br />
560 410 030 (black)<br />
63<br />
www.nieaf-smitt.nl
Notes<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
..................................................................................<br />
64<br />
www.nieaf-smitt.nl
Earth leakage clamp<br />
Detection if an installation which is decreasing in quality is<br />
not always easy. Especially factors such as earth leakage or<br />
frequent tripping of the RCD are difficult to trace. In most of<br />
these cases the access to the installation is influencing the time<br />
of the inspection negatively and in many cases it will make an<br />
inspection or repair very expensive. For such problems, an earth<br />
leakage clamp is most convenient.<br />
65<br />
www.nieaf-smitt.nl
Earth leakage clamp<br />
Earth leakage clamp<br />
The best way to explain a possible ‘problem situation’ is by a simple example.<br />
Suppose an installation is completely or partially out of order. The installer is called to solve the problem,<br />
and finds out that the RCD is causing the trouble. When a difference between phase and neutral occurs,<br />
the RCD trips, due to an obvious leakage to earth. Frequently tripping means a continuous leakage.<br />
The most logical reason for this problem is an decreased insulation resistance to phase and earth.<br />
In order to detect this problem, the installer decides to perform an insulation resistance test.<br />
To do so, all cables of the installation will need to be diverted and disconnected from the installation.<br />
In addition to this the installation is equipped with high sensitive appliances and equipment.<br />
Performing an insulation resistance test will seriously damage these devices.<br />
The customer however, wishes to continue operation or at least keep the time for the inspection as short<br />
as possible. In this example, an earth leakage clamp can be used for measuring a leakage current or<br />
differential current. The clamp can also be used for locating such currents without having to disconnect<br />
or switch off the installation. This saves a lot of time and money!<br />
Meter<br />
The leakage clamp reads the leakage current<br />
The leakage clamp does not read the leakage current<br />
RCD<br />
Temporarily<br />
bridge out<br />
Conductor<br />
with bad<br />
insulation<br />
PE<br />
66<br />
www.nieaf-smitt.nl
Earth leakage clamp<br />
NI 333<br />
Article number: 626 005 024<br />
Earth leakage clamp<br />
At first, the NI 333 looks like a normal current clamp. Nevertheless,<br />
the special integrated technique of the jaw enables the user to<br />
measure very low or differential currents. The NI 333 is designed<br />
with an ergonomic housing with a wide jaw (opening).<br />
With this jaw, conductors up to 30 mm. can be measured easily.<br />
The jaw of the clamp is very sensitive, yet very well isolated.<br />
This enables the user to measure not only within the standard<br />
frequency of 50/60 Hz, but also at higher frequencies. In order<br />
to filter the disturbance of high frequencies, a special filter has<br />
been developed. This widens the range from 40Hz up to 1kHz. All<br />
measured values are displayed on the LCD screen.<br />
Features<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Auto Power Off<br />
Data Hold<br />
High accuracy<br />
Relative measurement<br />
Wristband<br />
Including<br />
Bag<br />
Testleads<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Voltage detection 0,1V…400 V AC (± 2,0% + 4d)<br />
Current 10μA…60 A AC (± 2,0% + 5d)<br />
Resistance<br />
0,1 Ω…400 Ω<br />
Specifications<br />
Over voltage category CAT II 600V / CAT III 300V<br />
Display resolution 3999d<br />
Max. conductor size 30 mm.<br />
Standard EN 61010-1<br />
Dimensions<br />
210 x 70 x 40 mm.<br />
Weight<br />
± 230 gram (incl. batteries)<br />
67<br />
www.nieaf-smitt.nl
Accessories<br />
Accessories for earth leakage clamps<br />
Bag<br />
article number:<br />
626 006 013<br />
Storage bag for NI 333<br />
68<br />
www.nieaf-smitt.nl
Current clamp adapters<br />
In many cases the standard test equipment does not offer the<br />
flexibility or capacity for a current measurement. Multimeters<br />
are mostly limited in their range or capacity (for example 10A).<br />
Besides, such instruments are unable to measure currents<br />
without making contact to the conductor.<br />
69<br />
www.nieaf-smitt.nl
Current clamp adapters<br />
Current clamp adapters<br />
Current clamp adapters are developed to be a simple accessory and / or extension to a digital multimeter<br />
or other instruments.<br />
These adapters are standard equipped with two connectors for connection to a multimeter and a curled<br />
cable for measuring at a distance of the instrument.<br />
By using the same technique as standard current clamps, the current clamp adapters have a completely<br />
isolated jaw. This makes it possible to accurately measure higher currents up to 1000A.<br />
In case of using an analyser or data logger, the instruments are designed to store, analyse and display different<br />
values. For measuring currents with these Power Analysers several clamp adapters are available. The portfolio<br />
of clamp adapters is build up by several different models, each with its own size, range or type of jaw.<br />
The mini adapters have a range of 20 or 200 Amps, Becase of their small size, the adapters can be carried<br />
and used easily. The jaw of 15 x 17mm can be used for most conductors / cables in a low voltage installation.<br />
In case higher currents have to be measured, clamps with a range of 400A and 1000A are available.<br />
These adapters can be used for larger conductors of heavy installations or appliances. The jaw is 52mm<br />
and therefore easy to use in every application.<br />
Due to lack of room, some applications do not allow the use of a standard jaw of a current clamp adapter.<br />
For these situations a flexible clamp is available. The flex clamp has one flexible head, which can be<br />
mounted around a conductor easily.<br />
70<br />
www.nieaf-smitt.nl
Current clamp adapters<br />
NI 31<br />
Article number: 626 005 007<br />
Compact current clamp adapter<br />
The compact current clamp adapter NI 31 is an easy to use<br />
solution for measuring high currents (AC) in combination with<br />
a multimeter. Complete with curled cable, the adapter can be<br />
connected to the multimeter.<br />
Features<br />
•<br />
•<br />
•<br />
4 mm connectors<br />
High accuracy<br />
Up to 400A AC<br />
Including<br />
Connectors 4 mm,<br />
touch proof<br />
Bag<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Current detection 0,1…400 A AC (± 1,9% + 0,5A)<br />
Output voltage<br />
1mV AC voltage<br />
per 1A AC<br />
Specifications<br />
Over voltage Category CAT II 600V<br />
Frequency<br />
50…60 Hz<br />
Max. conductor size 29 mm.<br />
Max. jaw opening 30 mm.<br />
Standard EN 61010-1<br />
Dimensions<br />
148 x 72 x 36 mm.<br />
Weight<br />
± 250 gram<br />
71<br />
www.nieaf-smitt.nl
Current clamp adapters<br />
NI 39T<br />
Article number: 626 005 022<br />
Current clamp adapter<br />
The NI 39T is used for measuring AC or DC currents up to 1000A.<br />
By using the of centre placed rotating switch to choose the correct<br />
range, measurements can be done single handed. The integrated zero<br />
button can be used for DC measurements. The adapter has two LED’s,<br />
for Low Battery and Power On indication. Complete with curled cable,<br />
the adapter can be connected to a multimeter<br />
Features<br />
•<br />
•<br />
•<br />
4 mm connectors<br />
AC and DC measurement<br />
Up to 51 mm conductors<br />
Including<br />
Bag<br />
+ Manual<br />
+ Batteries<br />
Specifications<br />
Function Range Accuracy<br />
Current detection<br />
Frequency<br />
Output voltage<br />
1…1000 A AC<br />
100 A … 1000 A DC<br />
40…400Hz<br />
1mV voltage<br />
per 1A AC<br />
(± 1,9% + 2A)<br />
(± 1,9% + 7A)<br />
Specifications<br />
Over voltage Category CAT II 1000V / CAT III 600V<br />
Frequency<br />
40…400Hz<br />
Max. conductor size 51 mm.<br />
Max. jaw opening 53 mm.<br />
Standard EN 61010-1<br />
Dimensions<br />
232 x 90 x 32 mm.<br />
72<br />
www.nieaf-smitt.nl
Current clamp adapters<br />
20A/1V and 200A/1V<br />
Article number: 20A/1V 626 000 521<br />
Article number: 200A/1V 626 000 520<br />
Miniature current clamp adapter<br />
Miniature current clamp adapter for Power Analysers PHA3300<br />
and PQA6600. With their small size, the clamp can easily be stored<br />
in the carry bag together with the Analyser. Most of the cables in<br />
a low voltage installation can be measured highly accurate by the<br />
jaw (opening) of 15 x 17 mm. The 20A/1V and 200A/1V are equal<br />
clamps, except for their measuring range.<br />
Specifications<br />
Function<br />
Range<br />
model 20A/1V<br />
Ratio<br />
20A: 1V<br />
Nominal input current<br />
20A<br />
Max. Cont. Input current 25A<br />
model 200A/1V<br />
Ratio<br />
200A: 1V<br />
Nominal input current<br />
200A<br />
Max. Cont. Input current 250A<br />
Accuracy 1%<br />
Specifications<br />
Over voltage category<br />
Output signal<br />
Frequency<br />
Dielectric strength<br />
Temperature<br />
Output<br />
Max. voltage not insulated<br />
conductors<br />
CAT III 600V<br />
1 V AC at nominal<br />
input current<br />
40 Hz tot 5000 Hz<br />
3000 V 50 Hz at 1 minute<br />
-10°C tot +50°C<br />
1.5 meter cable with<br />
D01 connector<br />
30V RMS<br />
insulated conductors<br />
600V RMS<br />
Max. jaw opening<br />
15 x 17 mm.<br />
Standard EN 61010-1<br />
Dimensions<br />
90 x 40 x 23 mm.<br />
Weight<br />
± 115 gram<br />
73<br />
www.nieaf-smitt.nl
Current clamp adapters<br />
400A/1V and 1000A/1V<br />
Article number: 400A/1V 626 000 519<br />
Article number: 1000A/1V 626 000 542<br />
Current clamp adapter<br />
Current clamp adapters for Power Analysers PHA3300 and PQA6600.<br />
With these adapters higher currents up to 400A or 1000A and larger<br />
conductors can be measured. The jaw (opening) is 52 mm.<br />
Specifications<br />
Function<br />
Range<br />
model 400A/1V<br />
Ratio<br />
400A: 1V<br />
Nominal input current<br />
400A<br />
Max. Cont. Input current 500A<br />
Accuracy 1%<br />
Model 1000A/1V<br />
Ratio<br />
1000A: 1V<br />
Nominal input current<br />
1000A<br />
Max. Cont. Input current 1200A<br />
Accuracy 1%<br />
Specifications<br />
Over voltage category<br />
Output signal<br />
Frequency range<br />
Dielectric strength<br />
Temperature range<br />
Output<br />
Max. voltage not insulated<br />
conductors<br />
Max. jaw opening<br />
CAT III 600V<br />
1 V AC at nominal<br />
input current<br />
40 Hz tot 5000 Hz<br />
3000 V 50 Hz at 1 minute<br />
-10°C tot +50°C<br />
1.5 meter cable with<br />
D01 connector<br />
600V<br />
52 mm.<br />
Standard EN 61010-1<br />
Dimensions<br />
Weight<br />
101 x 215 x 40 mm.<br />
± 610 gram<br />
74<br />
www.nieaf-smitt.nl
Current clamp adapters<br />
Flexclamp<br />
Article number: 626 000 686<br />
Flextang 3000A/1V 1 fase<br />
Flexible current clamp adapter suitable for Power Analysers<br />
PHA3300 and PQA6600. The flexible head is used for easy<br />
measuring in those installations which are difficult to reach<br />
or where limited space is available.<br />
By using the Rogowski-principle, very accurately a wide range can<br />
be measured. The measuring range goes up to 3000A. In order to<br />
keep the accuracy level, the clamp has a switch for manual ranging<br />
and ON-OFF mode.<br />
Specifications<br />
Function<br />
Range<br />
Ratio<br />
3000A: 1V<br />
Nominal input current<br />
3000A<br />
Max. Cont. Input current 4200A<br />
Accuracy 1%<br />
Specifications<br />
Over voltage category<br />
Output signal<br />
Frequency<br />
Dielectric strength<br />
Temperature<br />
Output<br />
CAT III 600V<br />
1 V AC at nominal input current<br />
10 Hz tot 20k Hz<br />
5550 V, 50 Hz at 1 minute<br />
-10°C tot +70°C<br />
0.5 meter cable with<br />
D01 connector<br />
Max. voltage<br />
not insulated conductors 600V<br />
Max. jaw opening<br />
100 mm.<br />
Standard EN 61010-1<br />
Dimensions<br />
n/a<br />
Weight<br />
± 870 gram<br />
75<br />
www.nieaf-smitt.nl
Current clamp adapters<br />
Earth clamps<br />
Article number: ERTa7 626 000 309<br />
Article number: Miniclamp 626 000 637<br />
Earth clamps (utility-city measurements)<br />
It is very important to determine the quality of each separate earth<br />
electrode, when more than one earth system is parallel connected.<br />
In general it is difficult to release the mechanical connection of<br />
these electrodes because of rusty parts like screws, bolts etc.<br />
That is why the ERT-S and the Eurotest instruments are equipped<br />
with the UTILITY mode. This function offers the possibility to use a<br />
current clamp for measurements of such earth electrodes without<br />
disconnected those. The ERTa7 has a range up to 1000A and the<br />
miniclamp up to 200A<br />
ERTa7<br />
Specifications<br />
Miniclamp<br />
Specifications<br />
ERTa7<br />
Ratio<br />
Max. jaw opening<br />
Dimensions<br />
Weight<br />
Miniclamp<br />
Ratio<br />
Max. jaw opening<br />
Dimensions<br />
Weight<br />
Output signal<br />
Frequency<br />
Output<br />
1000A:1A<br />
52 mm.<br />
10 x 215 x 40 mm.<br />
± 610 mm.<br />
200A:200mA<br />
15 x 17 mm<br />
90 x 40 x 23 mm.<br />
± 115 gram<br />
1A at nominal input current<br />
40 – 5000 Hz<br />
1,5 meter cable with 4 mm.<br />
plugs<br />
76<br />
www.nieaf-smitt.nl
Notes<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
.................................................................................<br />
77<br />
www.nieaf-smitt.nl
Nieaf-Smitt Installation technology<br />
Portable test & measuring equipment
SALES OFFICES<br />
HONG KONG<br />
Mors Smitt Asia Ltd.<br />
# 807, Billion Trade Centre, 31 Hung To Road<br />
Kwun Tong, Kowloon, Hong Kong SAR<br />
T +852 2343 5555<br />
F +852 2343 6555<br />
E info@morssmitt.hk<br />
THE NETHERLANDS<br />
Nieaf-Smitt B.V.<br />
Vrieslantlaan 6<br />
3526 AA Utrecht, The Netherlands<br />
T +31 (0)30 288 1311<br />
F +31 (0)30 289 8816<br />
E sales@nieaf-smitt.nl<br />
Your local contact:<br />
TMI 1-2 V 1.0 - September 2009<br />
www.nieaf-smitt.nl