Instruments Brochure - WoodBeam

Test tools
VoltSafe
Article number: 626 000 662
Voltage detector
The VoltSafe is an unique instrument, being a voltage detector
ánd non-voltage detector. The detector is always activated and
gives a (red) optical and an acoustic signal upon the presence of
AC voltage.
By activating the on/off switch, the correct operation of the
detector is checked (selftest). A single beep will sound and the
probe tip will illuminate shortly. Both the pcb as well as the
battery power are tested. The proper functioning of the unit is
proved and a green LED is given for ~ 15 sec. Upon detection of
voltage the VoltSafe will indicate both optical as acoustic. Since its
functionality was tested, no indication of the VoltSafe means no
detection of voltage; non-voltage detection.
With the range of 100 – 1000 V AC and the acoustic signal of
65 dB, the VoltSafe is a universal instrument and can be used
in many service purposes.
Features
•
•
•
•
Voltage detector up to 1000V AC
Non Voltage detection
Self-test by on/off switch
Optical and acoustical signal when voltage is detected
Including
IP
+ Batteries
+ Manual
Specifications
Function
Voltage detection
Range
100 – 1000 Volt AC
Specifications
Supply
IP-Protection
Overvoltage category
Drop proof
2x AAA, 1.5V battery
IP64
CAT IV / 600V - CAT III / 1000 V
4 ft.
Standard EN 61010-1
Dimensions
Weight
128 x 28 x 16 mm.
± 55 gram
15
www.nieaf-smitt.nl