ATmega 103L Rev. F/G, ATmega 103 Rev. G Errata Sheet 8-Bit AVR ...
ATmega 103L Rev. F/G, ATmega 103 Rev. G Errata Sheet 8-Bit AVR ...
ATmega 103L Rev. F/G, ATmega 103 Rev. G Errata Sheet 8-Bit AVR ...
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Verifying EEPROM In-SystemEEPROM verify In-System Programming mode cannotoperate with maximum clock frequency. This is independentof the SPI clock frequency.Problem Fix/WorkaroundReduce the clock speed, or avoid using the EEPROMverify feature.1. Serial Programming at Voltages Below 2.9 VoltsAt voltages below 2.9 Volts, serial programmingmight fail.Note: Applies only to <strong>ATmega</strong><strong><strong>103</strong>L</strong>.Problem Fix/WorkaroundKeep V CC above 2.9 Volts during in-system programming.2<strong>ATmega</strong><strong>103</strong>/L
Change language