Rhinoco Catalogue 2009 - Rhinoco Technology

Makes your alarm sensors ‘Dual Purpose’ by turning on appliances
& lights automatically as well as activating your alarm!
WORLD
Part No.
ENSA
HOME & BUSINESS SECURITY & SAFETY PRODUCTS
ENERGY SAVING DEVICES (ENSA)
Home Automation / Remote
Lighting
This unique product simply replaces the standard
light switch in a room. The lights can then
automatically be turned on when installed along with
a compatible wireless detector, remote control or by
an existing alarm sensor that is easily retrofi tted with
a miniature transmitter. When used in auto mode,
if the wireless detector senses movement, a door
opening, or perhaps even smoke, the ENSA can
automatically turn the lights on for a pre-determined
period. By not turning on a room light unless there is
activity in the room, and there is insuffi cient natural
lighting this product saves energy . There is also a
manual mode of operation, where you can turn the
lights permanently on or off as per a normal light
switch.
- Low cost solution to the home automation and
energy saving control of lighting and other devices
(i.e. fans), without the need to install any cable or
expensive control boxes.
- Can be used in virtually any home or business for
FIRST! convenience, added security, power bill reduction WORLD
and of course environmental benefi ts
- Can be installed in minutes by a licensed electrician
without requiring any electrical cabling
- Gives a unique opportunity for the security industry
to enhance the function of their alarm systems by
making their detectors dual purpose.
60 sales@rhino.com.au - www.rhino.com.au
FIRST!
Part No.
ENSAPOWERPOINT
Energy Saving Automated
Wireless Power Point
This unique product simply plugs into your existing
power point and allows you to control any mains
powered device up to 10A (amps) via a wireless
sensing device or remote control. Common
applications include connecting a lamp, fan, or
air-conditioner and using a radio remote control to
be able to turn your appliance on/off from virtually
anywhere in your home. Alternatively, you can use
a wireless detector to save energy by not turning on
connected devices unless there is actually human
presence detected or insuffi cient natural lighting.
You can also retro-fi t our tiny transmitter to existing
alarm detectors making them dual purpose.
-Connect any mains powered device up to
10amps.
-Compatible with all Watchguard wireless sensors
-Easy DIY Installation
-Inbuilt adjustable daylight sensor to allow setting of
light level for activation.
-Adjustable timer to allow device to turn off
automatically after a set period.
-Can be used with our radio remote controls for
simple on/off operation.