GEPCO Fibre Optic Solutions Catalog - Carraro Broadcasting ...

CABLE ASSEMBLIESHybrid Fiber Breakout: Internal DistributionGepco ® Brand hybrid fiber internal distribution cables do not useconventional hybrid 311M cables and are intended for internalequipment or panel wiring only. The SMPTE 304M end uses OEM style,non-cable-mount hybrid connectors and is terminated to insulatedcopper wire and individual, simplex breakout fibers. The componentbreakout end has ST, SC, or LC optical connectors, while the copperelements feature AMP ® or blunt ends.As with all Gepco GHF cables, the breakout series is machine polishedto meet or exceed all SMPTE 304M/311M standards.FEATURES & BENEFITSST/SC/LC Optical BreakoutAMP ® Electrical BreakoutMachine Polished to -55dB RL (Typical)Uses Short Length Fiber and Electrical ElementsFor Panel Mounting in Blank Panels or as a Replacementin Hybrid DevicesLength(First End)Connector Format(Second End)Fiber Breakout(Second End)Electrical BreakoutGHFBK- - /In FeetPB = Bulkhead PlugSB = Bulkhead SocketST = ST UPCSC = SC UPCLC = LC UPCDSC = Duplex SC UPCDLC = Duplex LC UPCStandard GenderA = 5-Pin AMP ® Metal CPC (for Mating with HDR1 & HMP8-Bxx Racks)B = 8-Pin AMP ® CPCC = 6-Pin AMP ® MATE-N-LOK ® CapD = BluntReverse GenderE = 5-Pin Reverse Gender CPC – In-line or Panel MountF =8-Pin Reverse Gender CPC – In-lineG = 8-Pin Reverse Gender CPC – Panel MountH = 6-Pin Reverse Gender MATE-N-LOK ®Hybrid Fiber Connector OptionsFiber Breakout Connector OptionsPBSBST SC LCElectrical Breakout Connector OptionsA B C E F G HStandard GenderReverse GenderAMP ® and MATE-N-LOK ® are registered trademarks of Whitaker Corporation.www.gepco.com | 800.966.0069 9