GEPCO Fibre Optic Solutions Catalog - Carraro Broadcasting ...

CONNECTORS, TOOLS & ACCESSORIESTest EquipmentVFI2HiLiteVisual Fault FindersThe VFI2 and HiLite by Noyes ® are compact but powerful visible red laser sources designed totroubleshoot faults on fiber optic cables. Light generated by these units will escape from sharpbends and breaks in jacketed or bare fibers, as well as poorly mated connectors. They canidentify faults in fiber optic cable jumpers, distribution frames, patch panels, and splice trays.SpecificationsVFI2HiLiteEmitter type Red Laser Red LaserWavelength 650 ± 10 nm 650 ± 10 nmOutput Power 1 mW (into Single-Mode fiber) 1 mW (into Single-Mode Fiber)Modulation 2 Hz or CW selected 2 HzConnector Type Universal Adapter (2.5 mm Included) 2.5 mm FixedPower 2 AA Alkaline Batteries (60 Hours Typical) 1 AAA Alkaline Battery (4 Hours Typical)Size (H x W x D) 5.5” x 2.4” x 1.3” 2.8” x 1.4” x 0.6”Includes VFI2 Unit, Instruction Card, and Carrying Case HiLite Unit, Instruction Card, and Carrying CaseInsertion Loss Test SetThe SMLP 5-5 test kit by Noyes ® combines the OPM5-2D optical power meter and OLS4integrated LED and Laser Light source and is ideally suited for testing fiber optic networks withhybrid (single-mode and multi-mode) cables.Ordering InformationModelIncludesOLS4 Optical Light Source, OMP5-2D Optical Power Meter, AA Batteries, Protective RubberSMLP 5-5Boots, Adapter Cap, USB Cable, PC Compatible Software and User’s Guide, 50 and62.5μm Mandrels, SMLP 5-5 Test Kit User’s Guide, and Carry CaseOptical Power Meter SpecificationsCalibrated Wavelengths850, 1300, 1310, 1490, 1550 nmTone Detection 270Hz, 330Hz, 1kHz, 2kHz Range: +6 to -50 dBm, +6 to -45 dBm for 850 nmMeasurement UnitsdB, dBm, μWPower2 AA Batteries (300 Hours)Size (H x W x D) 5.5” x 3.2” x 1.5”Integrated Laser and LED Source SpecificationsMulti-Mode Optical PortSingle-Mode Optical PortEmitter Type LED LaserWavelengths (Dual from Single Port) 850 ± 30 nm | 1300 -10/+50nm 1310 ± 20 nm | 1550 ± 20nmOutput Power > -20 dBm, 62.5μm Multi-Mode 0 dBm, 9μm Single-ModeBattery Life 30 Hours Typical 72 Hours TypicalPower 2 AA Batteries 2 AA BatteriesSize (H x W x D) 5.5” x 3.2” x 1.5” 5.5” x 3.2” x 1.5”SMPTE Launch CablesGepco ® Brand SMPTE launch cables adapt test equipment to hybrid fiber distribution systemsand cables. Single-mode breakout riser cable is terminated with SMPTE 304M hybrid fiberconnector (plug or socket) on one end with two SC fiber connectors on the other end.SpecificationsPart Number Length in Feet First End Connector Second End ConnectorGHTJ-20-SC-P 20 SMPTE 304M Plug SCGHTJ-20S-C-S 20 SMPTE 304M Socket SCNoyes ® is a registered trademark of AFL Telecommunications, LLC.www.gepco.com | 800.966.0069 43