11.07.2015 Views

Download MF6400 MF7400 HHP Brochure - Clarke and Pulman

Download MF6400 MF7400 HHP Brochure - Clarke and Pulman

Download MF6400 MF7400 HHP Brochure - Clarke and Pulman

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>and</strong> precisionfor versatilityHere are just a few examples ofhow perfectly matched groundspeed, engine speed <strong>and</strong> powerrequirement can benefit a widerange of applications:With Dyna-VT there is no compromise. From ‘creep’ applicationsas low as 0.03 km/h to high-speed road transport, you set theparameters for power, economy <strong>and</strong> comfort so that you can easilyextract the maximum performance at the lowest operating cost.Low speed <strong>and</strong> lowerpower requirement.Harvesting <strong>and</strong> planting - withprecise ground speed control, toreduce engine speed, minimisein-cab noise <strong>and</strong> maximise fueleconomy.Maximum speed <strong>and</strong> highpower requirement.Transporting a fully laden trailerfrom the field at high speed - withmaximum engine power availableto maintain speed on hills.Low speed with a highpower requirement.Using a power harrow/seed drillcombination - with PTO power <strong>and</strong>productivity maximised <strong>and</strong> withthe ability to fine-tune travel speedto optimise work quality.Choice of operating modesIn addition to Lever Mode, wherethe Power Control lever or armrestmountedDyna-VT lever are used,Pedal Mode is also available.Pedal ModePedal Mode enables the tractorto be controlled by the use of theaccelerator pedal or the h<strong>and</strong>throttle. It is possible to set anengine rev range (minimum 1,400<strong>and</strong> maximum 2,260 revs) betweenwhich the engine is permitted tooperate. This enables the operatorto set the tractor precisely formaximum performance <strong>and</strong>economy for the prevailingconditions.Forager Mode, is ideal whenforaging or baling. This modemaintains pre-set engine speed<strong>and</strong> maximum power.So if a large lump of crop isencountered in the swath, just liftoff the pedal while the material isbaled or chopped. Ground speedis adjusted but engine speed <strong>and</strong>power is maintained.Once the problem has beentackled, simply press the pedal<strong>and</strong> you’re off again at normalworking speed.Maximum speed <strong>and</strong> lowpower requirement.Towing an empty trailer to thefield - at up to 50 km/h* with anengine speed of only 1600 rpm, tominimise in-cab noise <strong>and</strong> reducefuel consumption.* Depending on market/legislation1415

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!