View - Bridon

Titan Electric Hoist -Cookes 25/8/09 6:43 PM Page 1Electric Builder’s HoistPRODUCT USAGEThe Electric Builder’s Hoist is designed for building sites and variousconstruction workplaces such as warehousing, buildings, storage areas,factories in general, as well as domestic applications.FEATURESCompact and lightweight design which allowseasy mounting.Automatic stop switch to avoid over-windingof the rope.A reverse-winding limit lever.Double safety brake device including anelectromagnet brake for instant braking.SECTION 6MANUAL & ELECTRIC HOISTSAND LIFTING CLAMPSOperates on single phase 240 volt power supply.360° universal joint saddle with safety hook.Hand held control pendant with safety switch.Optional mounting arm bracket.WLHElectric Builder’s Hoist Mounting Arm BracketMax 4319Min 2420°FREESet of replacementbrushes with eachunit purchased.1127.50845.33Ø48.587.5090.12Part No. 10961599Ø56Model Code 10961590 10961593 10961595Length (L) mm 240 240 240Width (W) mm 180 180 210Height (H) mm 660 660 670Capacity kg 160 230 300Safety FactorWLL x 1.5WLL x 1.5WLL x 1.5Standard Lift303030Motor Power/amps 1.2 / 6 1.3 / 7 1.3 / 8Lifting speed m/min. 23 23 15Wire rope mm 5mm 7x19 5mm 7x19 5mm 7x19Minimum Grade Wire Rope G1900 IWRC G1900 IWRC G1900 IWRCContinuous usage rate p/hr (min) 15 15 15No. of starts per hour 300 300 300Control cable m 5 5 5Net weight kg 15 16 20Spare Parts Available: Power Cable TBH-230APC Control Pendant TBH-230ACP Latch Kit TBH-230-ALK Lower Hook TBH-230ALH Set of Brushes TBH-230ABS Limit Lever AssemblyTBH-230ALL Wire Rope Replacementcheck out our website: www.cookes.co.nz or email: salesadmin@cookes.co.nz