Compound Bow Owners Manual

More documents

Recommendations

Info

or counter clockwise to decrease weight. Note:Always turn the top and bottom adjustment bolts inequal amounts. Some Hoyt USA model bows areequipped with a Dual Locking Pocket System. Beforedraw weight adjustments are made on these modelsyou must first loosen the Locking Pocket screws locatedon the side of the pocket. (See fig 12) When adjustmentsare completed, re-tighten the Locking Pocketscrews.Pocket Locking Screwfig 12DRAW LENGTH ADJUSTMENTSome of the cams and wheels offered by Hoyt USAhave an InnerCam Adjustment System. TheInnerCam module is moved to a different position onthe cam to change draw length. <strong>Bow</strong>s equipped withthe InnerCam System can generally be adjusted withoutthe use of a bow press.TWO-CAM DRAW LENGTH ADJUSTMENTTo adjust the draw length on Hoyt’s two cam (innercam)model bows, use a standard allen key to loosenthe fastening screw. (See fig 13) Then using the sameallen key, remove the Draw Length screw. (See fig 13)16
Rotating the inner-cam in the (+) direction will lengthenthe draw. Rotating the inner-cam in the (-) directionwill shorten the draw. Once the inner-cam is inthe desired location, retighten the Draw Length screwfirst and then the Fastening Screw. Note: You mustmake the same adjustments to the top and the bottominner-cams or the bow cannot be properly tuned.Finer adjustments can be made by twisting the stringand cables. Special care must be taken when twistingthe string and cables as they can be twisted in thewrong direction. Hoyt USA recommends that theseadjustments be made by a qualified Pro Shop.Draw Length ScrewInner CamFastening Screwfig 13ONE-CAM DRAW LENGTH ADJUSTMENTHoyt USA Single cam bows with an inner-cam systemalso include a built-in draw stop peg. Therefore,when adjusting the draw length on inner-cam single17
Page 1 and 2: Compound BowOwners Manual
Page 3 and 4: INTRODUCTIONWelcome to the Hoyt USA
Page 5 and 6: COMPOUND BOW TERMINOLOGYEccentricAx
Page 7 and 8: 4. BE SURE OF YOUR BACKSTOP. Make s
Page 9 and 10: This will keep your bow’s string
Page 11: When putting your bow in a bow pres
Page 14 and 15: causing the cable to track off the
Page 16 and 17: erence line from axle to axle. (See
Page 20 and 21: cam bows both the module and the dr
Page 22 and 23: VERSACAM #3 CHARTModule Position Pe
Page 24: TUNING WITH BROADHEADSMost archers
Page 27 and 28: WARRANTY REGISTRATION CARD(Or regis

Compound Bow Owners Manual

Create successful ePaper yourself

Delete template?

Save as template?