Thermofoil_Spiral_2-2011 - Northern Contours

ThermofoilQUALITYcomponentswww.northerncontours.com866-344-8132

Level Series

Acrylic15000 Dark Grey Acrylic15003 Ruby Red Acrylic15002 Ivory Acrylic2DL Thermofoil15006 Wired Bronze15007 Wired CopperLevel Series3DL Thermofoil8060 Linear Graphite Gloss8039 Dark Pear Gloss2133 Natural WengeEdgebanding OptionsColor Matched Edgebanding3D Aluminum Edgebanding2-Part Edgebanding(Black, Ruby Red and White Acrylic only)Steel Gloss EdgebandingProduct Specifications• Flat laminated acrylic or thermofoil on 3/4” NAUF core.See Level Availability Chart for complete color andedgebanding selections.• Acrylic face is 1 mm solid ABS with clear acrylic overlay.Back is solid, color matched melamine.• 2DL face is thermofoil for flat lamination only. Back issolid, color matched melamine.• 3DL face is thermofoil for flat lamination or membranepressed components. Back is black, white or maplemelamine.• Edgebanding options include color matched ABS orPVC, 3D Aluminum ABS, Steel Gloss ABS or 2-part ABS.• One square foot minimum charge will apply for eachpiece.• Acrylic and 2DL accessory items are limited to overlays,4’ x 8’ Norlam, 4’ x 8’ PSA, cut-to-size panels and rawmaterial. See standard accessory page for our full lineof 3DL (thermofoil) accessories.• One square foot minimum charge will apply for eachpiece.National Sales Office: 866.344.8132www.northerncontours.comFront kitchen photography courtesy of EGRColors and woodgrains pictured may differ from actual product. Please refer to acrylic or product samples before ordering.02-2011

Portabella Series

Portabella SeriesOur extensive collection of 5-piece thermofoil doors is the result of ourcontinuing commitment to provide innovative products to our discerningcustomers. Capitalizing on advances in materials and Europeantechnology, Northern Contours leads the industry with glazed and 5-pieceprofile wrapped components. The Portabella Series includes FrenchMiter, Traditional Miter and Shaker styles with glaze and panel options.This unique collection of styles is produced in custom sizes andquantities and offers a host of appealing features:• Horizontal cross-rails on woodgrain prints have correct grainorientation for a more realistic appearance.• Profile wrapped stiles and rails assure a uniform appearance on theface and back of components.• Glaze options provide a popular designer look at very competitiveprices.• Complete line of accessories and surface options are available tocustomize your kitchen, bath, closet or home office project.We hope you enjoy these very durable and inviting products.French Miter StylesBisqueCandlelight Summerflame Rustic CherrySnow White | BisqueFM300 ProfilesFM301 ProfilesFM302 Profiles

Traditional Miter StylesBisqueBlonde MapleSummerflameMetallic FramesMF100 ProfileTM400 ProfilesTM401 ProfilesMF200 ProfileShaker StylesSnow WhiteBisqueRustic CherryMajestic WalnutSH500 ProfilesSH500 ProfileSH501 Profile

Portabella SeriesAvailability ChartFM300FM301Color: Bisque with Mocha GlazePanel: Flat or RaisedColor: Candlelight, Rustic Cherry or Summerflame with Mocha GlazePanel: Flat or Raised panelFM302 Color: Bisque or Snow White (No Glaze)Panel: Flat, Raised, or Beaded panelTM400TM401SH500Color: Bisque with Caramel GlazePanel: Flat or RaisedColor: Blonde Maple (No Glaze) or Summerflame with Walnut GlazePanel: Flat or RaisedColor: Rustic Cherry, Bisque or Snow White (No Glaze)Panel: Flat or Beaded (Rustic Cherry is flat panel only)SH501 Color: Majestic Walnut (No Glaze)Panel: FlatProduct Specifications• Drawer Front Options: horizontal or vertical graindirection on drawer front panels with woodgrainprints. Slab drawer fronts are available. Seeabove Panel Options for details on flat, raised,and beaded panels.• Profiles are only available in colors shown.• Frames are available.• Fingerpulls, mullions and specialty lazy susandoors are not available for this series.• One square foot minimum charge for eachpiece.• Metallic Frames are profile wrapped with afinished paper, not thermofoil.• All doors shown have identical matching foils(except Metallic Frames) for membrane pressedaccessories. See Product Guide for details.• Portabella door and drawer front orders have aleadtime of 6 business days. Orders that alsoinclude glazed accessory items have a leadtimeof 10 business days.The Portabella Series is producedin partnership with Friul IntagliS.p.A. These doors and many otherstyles and colors are available incontainer quantities with volumepricing direct from Italy.National Sales Office: 866.344.8132www.northerncontours.comFront kitchen photography courtesy of PWS Distributors.Colors and woodgrains pictured may differ from actual product. Please refer to foil or product samples before ordering.02-2011

Glazed Series

Glazed SeriesBreckenridge0165 White Satin withWalnut GlazeStonebridge2102 Majestic Walnut withWalnut GlazeClassic2017 Sienna Wild Apple withWalnut GlazeAmesbury II0139 Antique White withWalnut GlazeManchester II0165 White Satin withWalnut GlazeManchester III0150 Bisque withCharcoal GlazeProduct Specifications• Drawer Front Styles: Dr awer front height will determineoptions for full rail, reduced rail or slab drawer fronts. Seedrawings below and Product Guide for details.Full RailReduced RailSlabNational Sales Office: 866.344.8132www.northerncontours.com• White melamine backs are standard. Matching melaminebacks are available for select woodgrains for an additionalcharge.• Available in select thermofoils. Please refer to ProductGuide for availability.• Fingerpulls are available for an additional charge except onManchester II and III.• One square foot minimum charge will apply for each piece.• Frames and mullions are available for this series. SeeProduct Guide for details.• Breckenridge and Classic doors are also available in archand cathedral styles.• Some accessory items cannot be glazed. See ProductGuide for details.• Glazed products are available with Charcoal, Walnut orWhite glaze.Colors and woodgrains pictured may differ from actual product. Please refer to foil or product samples before ordering.02-2011

Heritage Series

Heritage SeriesCumberland0161 Antique SatinAmesbury II0120 Snow WhiteStafford0165 White SatinStonebridge0150 BisqueProduct Specifications• Drawer Front Styles: Dr awer front height will determineoptions for full rail, reduced rail or slab drawer fronts.See drawings below and Product Guide for details.Full RailReduced RailSlab• White melamine backs are standard. Matchingmelamine backs are available for select woodgrainsfor an additional charge.• Available in all thermofoil selections, except Group E (gloss).• Fingerpulls are available for an additional charge.• One square foot minimum charge will apply for each piece.• Frames and mullions are available for this series.See Product Guide for details.National Sales Office: 866.344.8132www.northerncontours.comColors and woodgrains pictured may differ from actual product. Please refer to foil or product samples before ordering.02-2011

Traditional Series

Traditional SeriesClassic0164 Satin XNorthwoods0107 CreamWellington0120 Snow WhiteManchester II0165 White SatinManchester III0150 BisqueProduct Specifications• Drawer Front Styles: Dr awer front height will determineoptions for full rail, reduced rail or slab drawer fronts.See drawings below and Product Guide for details.Full RailReduced RailSlab• White melamine backs are standard. Matchingmelamine backs are available for select woodgrainsfor an additional charge.• Classic and Wellington are available in all thermofoilselections. Manchester II, III and Northwoods are availablein all thermofoil selections, except Group E (gloss).• Fingerpulls are available for an additional chargeexcept on Manchester II, III and Northwoods.• One square foot minimum charge will apply for each piece.• Frames and mullions are available for this series.See Product Guide for details.• Wellington and Classic doors are also availablein arch and cathedral styles.• Manchester II, III and Northwoods drawer fronts havereduced stiles and rails. See Product Guide for drawingand details.National Sales Office: 866.344.8132www.northerncontours.comFront kitchen photography courtesy of Medallion Cabinetry, Inc. an ELKAY COMPANYColors and woodgrains pictured may differ from actual product. Please refer to foil or product samples before ordering.02-2011

Shaker Series

Shaker SeriesShaker2040 Hard Rock MapleLancaster0139 Antique WhiteShaker Elite0117 SilkLancaster Elite2078 CandlelightBradford2055 Chocolate PearShaker with Ogee0103 TaupeProduct Specifications• Drawer Front Styles: Dr awer front height will determineoptions for full rail or slab drawer fronts. See drawingsbelow and Product Guide for details.Full RailReduced RailSlab• White melamine backs are standard. Matching melaminebacks are available for select woodgrains for an additionalcharge.• Available in all thermofoil selections.• Fingerpulls are available for an additional charge.• One square foot minimum charge will apply for each piece.• Frames and mullions are available for this series. SeeProduct Guide for details.National Sales Office: 866.344.8132www.northerncontours.comFront kitchen photography courtesy of Dura SupremeColors and woodgrains pictured may differ from actual product. Please refer to foil or product samples before ordering.02-2011

Contemporary Series

Contemporary SeriesCortina2016 Natual AppleItalia II2133 Natural WengeElegante II2123 Zhu BambooNovara2135 Coffee BeanPulse8021 Steel GlossTurino8038 Creme GlossParallel8028 Purple Gloss(shown on front)Aviero6005 Shark(shown on front)Product Specifications• White melamine backs are standard. Matching melaminebacks are available for select woodgrains for anadditional charge. Parallel and Pulse are on 7/8” corewith Black, White or Maple melamine back.• Available in all thermofoil selections.• Fingerpulls are available for an additional charge excepton Cortina, Parallel and Pulse.• One square foot minimum charge will apply for eachpiece.• Frames are available for this series. Mullions are availableon all except Parallel or Pulse. See Product Guide fordetails.National Sales Office: 866.344.8132www.northerncontours.comFront kitchen photography courtesy of UltraCraft CabinetryColors and woodgrains pictured may differ from actual product. Please refer to foil or product samples before ordering.02-2011

Select Series

Select SeriesSelect from a variety of profiles and thermofoils to design your owndoors and drawer fronts. Create a unique look to suit any decor andpersonalize your kitchen, bath or home office.stepDoor Style1Choose a door styleSlab, Square, Arch,or CathedralTo design your own doors and drawer fronts use your NorthernContours order form and follow these steps:stepInside Profile2Choose an Inside ProfileSlab SquareArch Cathedral2 Pass2.00 1.252.00 1.102.05 1.60A1093 Pass2.001.50A174A2012.00 1.50 1.95 1.65A107 A301 A501Radius Corner2 Pass profiles, A511,A901 will have radiuscorners.2.30 1.20 2.00 1.65A731A901 (radius corner)4 Pass2.00 1.55 1.75 1.702.27 1.07A3022.00 1.12A401A402Square CornerMost 3, 4 and 5 Passprofiles will havesquare corners.A4035 Pass1.75 1.50 2.20 1.85A105A511 (radius corner) A9512.55 1.10A961

stepOutside Profile3Choose an outside profile1/16" radius1/8" radius 3/8" radius 1/2" radius.19B099B111B038B127B104.25.28 .50 .37.38B110B132B102B158B108step4Drawer Front StylestepChoose a drawer front style - slab or profiled.Profiled drawer fronts will have the sameprofiles as doors and slab drawer fronts willhave the same outside profile. See ProductGuide for drawer front specifications.5ThermofoilstepstepFull RailChoose a thermofoil from product samples.Do not rely on photo reproduction or writtendescriptions. Please specify the ThermofoilNumber on the order form.6Matching Backs7SizesReduced RailSlabChoose a matching back if desired for selectwoodgrains. White melamine backs arestandard if a match is not specified. Matchingback options are listed in the Product Guide.Determine sizes of doors and drawer fronts,measuring to the nearest 1/32” or 1 mm inboth width and height.step8SquarestepFootageCalculate the square footage (inches: W x H ÷144 or mm: W x H ÷ 92903.04), rounding tothe nearest hundredth.9PricingstepUse Foil Group and profile to determinepricing per square foot. Consult price sheetfor additional information.10Customer ServiceIf you have any questions, please contactCustomer Service: 877-998-1814 ororders@northerncontours.com.Photo courtesy of MidContinent Cabinetry

Select SeriesDoor styles shown below are representative of the many options available.A174 B108 - 2 Pass0139 Antique WhiteA301 B110 - 3 Pass0114 Glacier WhiteA302 B102 - 4 Pass0105 Designer AlmondA951 B111 - 5 Pass2013 SummerflameProduct Specifications• Drawer Front Styles: Dr awer front height will determineoptions for full rail, reduced rail or slab drawer fronts.See drawings below and Product Guide for details.Full RailReduced RailSlab• White melamine backs are standard. Matching melaminebacks are available for select woodgrains for an additionalcharge.• Available in all thermofoil selections.• Fingerpulls are available for an additional charge except onB038, B108 and B127.• One square foot minimum charge will apply for each piece.• Frames and mullions are available for this series. SeeProduct Guide for details.• Doors, frames, and mullions are available in square,arch and cathedral styles.National Sales Office: 866.344.8132www.northerncontours.comFront kitchen photography courtesy of UltraCraft CabinetryColors and woodgrains pictured may differ from actual product. Please refer to foil or product samples before ordering.02-2011

Accessories

AccessoriesNorthern Contours offers a wide array of accessories to customize the lookof your kitchen, bath and home office. Our most popular accent pieces aredetailed on the following pages. If your requirements are beyond what yousee here, please contact us. We have extensive custom capabilities to meetyour needs.Frames & MullionsFrames and mullions are available in square, archand cathedral styles. Most door series also offerspecialty mullions. For details, see the ProductGuide for the door series of interest.Detailed information about all accessories is available in the Product Guide.MouldingsA variety of mouldings are available in all foil colorsin 8' lengths.Crown MouldingsInside / Outside CornerShoeBattanScribesBase MouldingsFillers, Overlays & RosettesFillers and overlays are available in fluted orslab styles. Rosettes may be added to fillersand overlays or ordered individually.Rosette profiles:237 2382391200

ValancesValances are available in most profiles in threestyles. Shown here, top to bottom: Roman,Cathedral and Country.Wine RacksScalloped and grid wine racks are available incustom sizes.Appliance PanelsAppliance panels are available for your refrigerator,dishwasher and oven (design permitting) to give yourkitchen a finished look. They are available in 2configurations:Option 1Option 2(Panel attached and suppliedby customer)Multi-Panel ProductsMulti-panel products can be produced for a varietyof applications including tall cabinets, islands andpeninsula backs in vertical or horizontalconfigurations.

Corner and End ShelvesCorner, Right End and Left End shelves are availablein 3/4” thicknesses.Matching Melamine BacksUpgrade your cabinets with door backs to matchthe fronts. Matching melamine backs are available inselect woodgrain foils to give components aconsistent look, front and back.Surfacing OptionsSeveral surfacing products are offered, giving youmore options for new cabinet fabrication andcabinet refacing:• Cut to size panels with laminated thermofoil oracrylic. Available in thicknesses of 1/8”, 1/4”, 1/2”(MN only), 5/8” and 3/4”. Edges are raw.• Norlam - Thermofoil or acrylic with a phenolic backthat can be applied like high pressure laminate.• PSA - Thermofoil or acrylic backed by pressuresensitive adhesive, ideal for refacing.• Beadboard - Thermofoil on beadboard in 4’ x 8’,4’ x 4’, or 2’ x 8’ sheets. Glaze available on selectthermofoils. See Product Guide for availability.Back and edges are raw.National Sales Office: 866.344.8132www.northerncontours.comDetailed information about all accessories is available in the Product Guide.Kitchen photography courtesy of Homecrest Cabinetry. • Appliques not available from Northern Contours.02-2011

Custom Thermofoil Product GuideWelcome to Northern ContoursThank you for your interest in our company. We began business in 1992, believing wewould be successful if we followed one basic principle: to treat our customers the way wewould like to be treated. Our business goals and philosophy have been established withthis in mind.For our customers, this means superior value, excellent service and quick delivery. It alsomeans continuous improvements in our people and processes and having the flexibility tomeet the ever changing needs of the market. And it means that honesty and integrity aren'tjust buzzwords. They are the foundation on which we build our business relationships.Our company continues to grow and expand to meet the needs of the market. We workdiligently to bring you new and innovative products. Our commitment to quality productsand service is something you can depend on.We look forward to building a service relationship that will bring value to your business andenjoyment to you.Michael RoneFounderNorthern ContoursThis Product Guide offers product and technical information to assist you in ordering orselling Northern Contours products. Note that the manufacturing specifications providedhere are current as of the date below and subject to change. For more information or to besure your guide is current, please contact your customer service representative.LocationsManufacturingNorthern Contours Thermofoil409 South Roberts StreetFergus Falls, MN 56537Northern Contours of KY Thermofoil1401 North Kentucky 3041Corbin, KY 40701Customer Service877.998.1814fax: 218.736.7919e-mail: orders@northerncontours.comSalesCorporate Headquarters1355 Mendota Heights Road, Suite 100St. Paul, MN 55120toll free: 866.344.8132fax: 651.695.1714e-mail: info@northerncontours.comwww.northerncontours.com2-11 1

866.344.8132 • www.northerncontours.com

Technical InformationCustom CapabilitiesNorthern Contours has complete customcapabilities. We provide a free quotation serviceand encourage you to contact our Sales Office(toll free 866.344.8132) with special requests,custom profiles and for information on project orvolume discounts. Other materials may beavailable depending upon order volume.Custom items requiring engineering and draftingwill be subject to an additional charge. Quoteprices are good for 30 days.Paintable DoorsPaintable (raw face and sides) doors and drawerfronts are available in limited styles. They arerouted and sanded on 3/4” MDF with amelamine back. Raw doors are not warrantedagainst warp.FingerpullsThe standard placement for fingerpulls on doorsis top and bottom and on drawer fronts is top orbottom. All fingerpulls are machined accordingto the following drawings. Fingerpulls areavailable for all door and drawer front stylesexcluding: Level, Portabella, Manchester,Northwoods, Cortina, and Select Series withoutside profiles B108 and B127.Hinge Boring SpecificationsUnless otherwise specified, hinge boringpatterns and standard placement will be asfollows:Hinge boring patternsPattern 1 (HB 1) Pattern 2 (HB 2)3"Door Heights6-15/16”up to 12”2"8 mm (2 plcs)35 mm3 mm45 mm9.5 mmHinge Pattern 1has a 35 mm bore andtwo 8 mm holes fordowels 1/2” (12.7 mm)deepStandard hinge placement12” upto 36”3"36” upto 60”3"3"35 mm3 mmHinge Pattern 2has a single 35 mmhole 1/2” (12.7 mm)deepover 60”3"Side ViewEdge View.40.152.00 2.00Drawer Front StylesDrawer front height and style will determineoptions for full rail, reduced rail and/or slabfronts. For more detail, please see ProductGuide pages for the door series of interest.2"3"Centered on Door3"Equally Spaced Equally SpacedEqually Spaced3"Full Rail (Profiled) Reduced Rail (Profiled) Slab4866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuidePlacing an OrderCustomer Service ContactsCustomer Service is open M – F, 8 AM to 5:30PM CST. You may reach your dedicated CSR(customer service rep) by calling 877.998.1814or via e-mail at: orders@northerncontours.comPlacing an OrderOrders are accepted via e-mail, EDI, or by faxusing Northern Contours order forms. Orderforms can be downloaded from our web sitewww.northerncontours.com. Orders areaccepted 24 hours a day 7 days a week, andcomplete orders are processed the samebusiness day if received before 3 PM, M – F.Orders may be placed in inches or millimeters.Order the exact size to the nearest 1/32 inch ornearest millimeter. Orders are always enteredwidth x height.Incomplete orders will be placed on hold untilmissing information is obtained. Orders on holdare not released for production and couldextend the lead time. Examples of orders onhold include incomplete product information,missing signature, or missing credit card/payment information.New AccountsFor all new accounts, a deposit of 50% orpayment by credit card is required. The balancedue will be invoiced. Initial orders for newaccounts will not be put into production untilyour deposit is received.Order AcknowledgementNorthern Contours acknowledges all orderswithin 24 hours; if you do not receive an orderacknowledgment please contact our CustomerService Department.Check all acknowledgments for accuracy andreport any discrepancy within 24 hours ofreceipt; Northern Contours is not liable forunreported errors or discrepancies. All ordersenter production the morning following theacknowledgment.LeadtimeFor standard products and Portabella orders(without glazed accessories), the leadtime is 6business days. Level, Glazed and Portabellaorders (with glazed accessories) require a 10business day leadtime. The day you receive youracknowledgement is business day one.Order Changes and CancellationsChanges or cancellations must be received inwriting within 24 hours of acknowledgment. Anychanges made after the 24 hour cut-off willresult in additional charges. Rush Orders cannotbe canceled or changed.Rush OrdersCustomers needing product sooner than ourstandard leadtime can request RUSH service.This service is available for an upcharge of 30%over regular pricing with a $25 minimum. RUSHorders ship in 3 business days for regular itemsand 5 days for Level and Glazed products.RUSH orders cannot exceed 100 square feet.RUSH service is not available on Portabellaorders. In special circumstances, we may beable to ship sooner than 3 or 5 days. ContactCustomer Service for fees and availability.PackagingWe package and ship our product according tosize and quantity. All of our packagingspecifications exceed UPS or common carrierstandards. Cartoning and pallet charges apply.These are net charges and discounts do notapply.Oversized cartons and moulding boxes aresubject to additional freight charges. Mouldingboxes are considered “OS2,” meaning they arebilled at 70 lbs. regardless of actual weight.If you have special packaging requirements,please contact your sales representative orcustomer service with details.2-11 5

Placing an OrderDelivery Methods and ChargesOrder size and delivery location will determinehow your product will be shipped. Typicallysmaller orders ship via UPS or FedEx Groundand larger orders ship via common carrier.Please indicate your shipping preference andreceiving capabilities (including whether or notyou have a forklift) on your Northern Contoursorder form. Note that deliveries to residentiallocations may incur additional delivery chargesby freight carriers.All prices are FOB from one of our productionfacilities. Freight charges are based on the totalweight of the order and are added to the invoiceat the time of shipment. Oversized items such asmoulding and large panels are subject toadditional shipping charges.Receiving Your OrderNorthern Contours strives to ship your ordersaccurately, completely and on time. All ordersare shipped FOB manufacturing facility.Northern Contours is not responsible for anyproduct damaged in transit or damaged due toexcessive handling or poor storage conditions.Please inspect the contents of your shipmentbefore signing your delivery receipt.Freight DamageAll damage or defects concealed or not, must bereported to Northern Contours CustomerService within 48 hours of receipt.FED-EX / UPS: sign for the order andimmediately contact Northern ContoursCustomer Service Department at 877.998.1814to report damage.LTL / Common Carrier: Sign the bill of lading(BOL) or delivery receipt stating damage or signstating you suspect damage if you suspectconcealed damage. Failure to acknowledgedamages at time of delivery will greatly reduceNorthern Contours carrier recourse options.Lost or Missing ProductVerify all orders are complete and accurate at timeof delivery and report any discrepancy within 48hours of receipt by calling Northern ContoursCustomer Service 877.998.1814.If you suspect the product is missing due toshipping damages, sign the BOL or deliveryreceipt stating you suspect there is productmissing and have the driver sign or initial allcopies. Failure to acknowledge missing productdue to shipping damages at time of delivery willgreatly reduce Northern Contours carrier recourseoptions.RemakesWhen damages, defects or errors are found withyour order, contact Northern Contours CustomerService within 48 hours of delivery. **We willcharge for and replace the component(s). Theproduct will be shipped, freight pre-paid, within 3days of being notified. Please include as muchdetail as possible to ensure we correct any erroraccurately.Northern Contours may request the return ofwrong, defective, and damaged product forinspection as part of our aggressive qualitycontrol program. For product valued in excess of$100, Northern Contours will issue a pre-paid calltag or have the product shipped under ourshipper accounts. For product valued under$100, a digital picture may suffice.**Once Northern Contours has verifiedresponsibility for the error with your order,Northern Contours will waive the charge for theproduct remade or issue you a credit toaccommodate the charge of the remake.SamplesNorthern Contours offers a variety of sampleoptions for your business. Small sample sizedoors, showroom samples and complete kitchendisplay are all available. Please contact your salesrepresentative for details.6866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideOrder Instructions1-piece Thermofoil Order InstructionsGlazed, Heritage, Traditional, Shaker, Contemporary, Select and Accessories.Check the ORDER box at the top of the Northern Contours order form. Note number of pages at upper right: Page___ of ___. Fill in the Date, Job Name (if applicable), PO #, and your name.Bill to • Ship to1. Complete Bill To address. Your acknowledgement will be sent to the Bill To fax number or email address.2. Complete Ship To if it differs; include whether the address is Commercial or Residential.Foil • Backer • Glaze • Door Style1. Select a foil and enter the four digit number in the boxes provided. The number can be found on the back ofyour foil sample, foil deck or in the Foil Reference Chart.2. Choose a melamine backer. White melamine is standard back on all doors and drawer fronts if nothing isspecified. If matching melamine back is preferred, please check for availability on the Foil Reference Chart orby contacting customer service.3. Check Glaze Color if applicable - White, Walnut or Charcoal.Doors • Frames • Mullions1. If ordering from the Select Series (designing your own door) specify the Inside and Outside Profile numbers inthe boxes provided. If ordering a door with a specific name, enter it in the Door Name box.2. Check the box for your choice of Slab, Square, Cathedral or Arch door style when ordering from the SelectSeries or ordering a Breckenridge, Classic or Wellington style. If nothing is specified, the default is square. Ifyour order includes a mix of styles, please use the Notes column to indicate your preferences.3. Check Yes or No for Fingerpulls. There is an upcharge for this option. Standard location for doors is both topand bottom. Attach a drawing if you prefer a different location.4. Specify hinge drilling - pattern 1, pattern 2 or other (see page 4 of Product Guide). If other, please attachdrawing with specifications. If the line is blank, default is no hinge drilling. There is an upcharge for hingedrilling. If ordering doors with cathedral or arch styles, specify in Notes column which side you need drilled,left, right or pair, as seen when looking at the door face. If some doors do not need drilling, please specify inNotes column as well.5. Check grain direction. If blank, default is vertical. Maximum height of 48” for horizontal.6. Enter quantity and width & height to the nearest 1/32” or 1 mm for each item. Use the Notes column to noteframes, mullions, cathedral or arch styles and other special requests.Drawer Fronts1. Choose a drawer front style: Slab or Profiled. If only ordering drawer fronts, be sure to enterprofile information under doors, frames and mullions. For profiled drawer fronts, somedimensions will require a front with a reduced rail and center profile. See Product Guide forthe door series you are ordering or contact customer service for details.2. If ordering a woodgrain foil, check Vertical or Horizontal grain direction. If neither is checked,you will receive horizontal.3. Check Yes or No for Fingerpulls. There is an upcharge for this option. Standard location forfingerpulls on drawer fronts is top or bottom only. See page 4 of Product Guide for drawings.4. Enter the quantity and width & height to the nearest 1/32” or 1 mm for each item.AccessoriesEnter quantity. Use the Description column for details including size (if applicable), grain direction,and special requirements.Full Rail (Profiled)Reduced Rail (Profiled)SlabOrder Instructions continue on next page2-117

Order InstructionsShipping Instructions • Payment Method1. Check the box for your preferred shipping method, otherwise we will ship Best Way.2. Check Yes or No for forklift availability.3. Check your method of payment. First time orders require a 50% payment before order is put into production.SignatureSign your order and fax or email to Customer Service.5-Piece Thermofoil Order InstructionsPortabella and matching Accessories.Check the ORDER box at the top of the Northern Contours order form. Note number of pages at upper right: Page___ of ___. Fill in the Date, Job Name (if applicable), PO #, and your name.Bill to • Ship to1. Complete Bill To address. Your acknowledgement will be sent to the Bill To fax number or email address.2. Complete Ship To if it differs; include whether the address is Commercial or Residential.Doors • Frames1. Check the box for your choice of Traditional Miter, French Miter, Shaker or Metallic Frame. If your orderincludes a mix of styles, please use the Notes column to indicate your preferences. Note: If you have chosena woodgrain foil, standard grain direction on the center panel of all doors is vertical.2. Specify hinge drilling - pattern 1, pattern 2 or other. If other, please attach drawing with specifications. Thereis an upcharge for hinge drilling. If some doors do not need drilling, please specify in Notes column. If theline is blank, default is no hinge drilling.3. Check box for Raised, Flat, or Beaded Panel. If your order includes a mix of panels, use the Notes column.4. Enter quantity and width & height to the nearest 1/32” or 1 mm for each item. Use the Notes column to noteframes and other special requests.Drawer Fronts1. Check box for slab or 5-piece drawer front. If your order includes a mix of styles, use the Notes column.2. Check box for Raised, Flat, or Beaded Panel. If your order includes a mix of panels, use the Notes column.3. If ordering a woodgrain foil, check Vertical or Horizontal center panel grain direction. If neither is checked,you will receive horizontal.4. Enter the quantity and width & height to the nearest 1/32” or 1 mm for each item. Use the Notes column forspecial requests.AccessoriesEnter quantity. Use the Description column for details including size (if applicable), grain direction, and specialrequirements.Shipping Instructions • Payment Method1. Check the box for your preferred shipping method, otherwise we will ship Best Way.2. Check Yes or No for forklift availability.3. Check your method of payment. First time orders require a 50% payment before order is put into production.SignatureSign your order and fax or email to Customer Service.8866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideOrder InstructionsLevel Order InstructionsLevel and matching Accessories.Check the ORDER box at the top of the Northern Contours order form. Note number of pages at upper right: Page___ of ___. Fill in the Date, Job Name (if applicable), PO #, and your name.Bill to • Ship to1. Complete Bill To address. Your order acknowledgement will be sent to the Bill To fax number or email address.2. Complete Ship To if it differs; include whether the address is Commercial or Residential.Acrylic • Thermofoil1. Choose either Acrylic or Thermofoil.2. For Acrylic:a. Select a face color from the drop down menu if filling out electronically or enter the name and five-digitnumber in the box provided.b. Choose an edgebanding from the drop down menu if filling out electronically or enter it in the box provided.Refer to Availability Chart for acceptable acrylic and edgebanding options.3. For Thermofoil:a. Select a foil color from the drop down menu if filling out electronically or enter the name and foil number inthe box provided. Backer will populate automatically on the electronic form; otherwise, refer to AvailabilityChart for thermofoil and backer combinations and enter it in the box provided.b. Choose an edgebanding from the drop-down menu if filling out electronically or enter it in the box provided.Refer to Availability Chart for acceptable thermofoil and edgebanding options.c. Select either Vertical or Horizontal grain direction from the drop-down menu if filling out electronically orenter in the box provided. If neither is specified, you will receive vertical. Maximum height of 47” forhorizontal.Doors1. Specify hinge drilling - pattern 1, pattern 2 or other (see page 4 of Product Guide). If other, please attach drawingwith specifications. If the line is blank, default is no hinge drilling. There is an upcharge for hinge drilling. If somedoors do not need drilling, please specify in Notes column.2. Enter quantity and width and height to the nearest 1/32” or 1 mm for each item.Drawer Fronts1. Select either vertical or horizontal grain direction from the drop-down menu if filling out electronically or enter inthe box provided. If neither is specified, you will receive the same as your doors.2. Enter the quantity and width & height to the nearest 1/32” or 1 mm for each item.AccessoriesEnter quantity. Use the Description column for details including size (if applicable), grain direction, and specialrequirements.Shipping Instructions • Payment Method1. Check the box for your preferred shipping method, otherwise we will ship Best Way.2. Check Yes or No for forklift availability.3. Check your method of payment. First time orders require a 50% payment before order is put into production.SignatureSign your order and fax or email to Customer Service.2-119

Level SeriesLV600LV601Edgebanding application is shown in thefollowing drawings:Door - Front ViewDrawer Front - Front ViewDrawer Front - Top ViewDoor - Top ViewR0.04Acrylic or ThermofoilThermofoilLV600LV6011 mm ABSEdgebandingMelamineBack.46 mm or .6 mmEdgebandingMelamineBackProduct Specifications• Flat laminated acrylic or thermofoil on 3/4” NAUF Core.- Acrylic face is 1 mm solid color ABS with clear acrylicoverlay. Back is solid, color matched melamine.- 2DL face is thermofoil for flat lamination only. Backis solid, color matched melamine.- 3DL face is thermofoil for flat lamination ormembrane pressed components. Back is black,white or maple melamine.- For details on color selections, see Level AvailabilityChart at www.northerncontours.com or bycontacting Customer Service.• LV600 features 1 mm edgebanding that has a slightradius.• LV601 features a thin (.46 mm or .6 mm) edgebandingthat is trimmed square.• One square foot minimum charge will apply for eachpiece.• Standard grain direction will be the same for both doorsand drawer fronts. Specify horizontal or vertical grain.If nothing is specified, the default is vertical.• Acrylic and 2DL accessory items are limited to overlays,4’ x 8’ Norlam, 4’ x 8’ PSA, cut-to-size panels, and rawmaterial. See standard accessory section at the end ofthis book for our full line of 3DL (thermofoil) accessories.• Fingerpulls, frames, mullions or specialty lazy susandoors are not available for this series.• Level styles are produced as shown. Variation on thisprofile is not available.• Level products are only available from our MNproduction facility.Door/DrawerMinimumOverlayMinimumMaximum*Doors and Fronts Width Height Width Height Width HeightLevel 4 4 2.875 18 47 95*While our manufacturing capabilities allow us to go to 47” x 95”, product over 31” wide or 60” long will not becovered by our warranty. We highly recommend using multiple doors instead. If you do order unwarranted product over31” or 60”, we recommend using additional hinges to help control any warping that may occur. Oversize fees may apply.10866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuidePortabella Series - French MiterFM300FM300FM301FM301FM300PNL1FM300PNL3FM301PNL1FM301PNL3FM300F2.70FrameFM300F2.70FrameFM301F2.70FrameFM301F2.70FrameFM300DDrawer FrontPNL1FM300DDrawer FrontPNL3FM301DDrawer FrontPNL1FM301DDrawer FrontPNL3FM302 FM302 FM302FM302PNL1FM302PNL2FM302PNL4FM302F2.70FrameFM302F2.70FrameFM302F2.70FrameFM302DPNL1FM302DPNL2FM302DPNL4Drawer FrontDrawer FrontDrawer Front2-11 11

Portabella Series - French MiterProduct Specifications• FM300 is available in Mocha Glazed Bisque thermofoilwith PNL1 or PNL3.• FM301 is available in Mocha Glazed Candlelight, MochaGlazed Rustic Cherry and Mocha Glazed Summerflamethermofoil with PNL1 or PNL3.• FM302 is available in Bisque or Snow White thermofoilwith PNL1, PNL2 or PNL4.• Portabella door and drawer front orders have a leadtimeof 6 business days. Orders that also include glazedaccessory items have a leadtime of 10 business days.• One square foot minimum charge will apply for eachpiece.• Standard panel grain direction: vertical for doors,horizontal for drawer fronts. Vertical direction availableon drawer fronts if noted.• All accessory items are available in identical matchingfoils.• Slab drawer fronts are available. Standard graindirection is horizontal. Minimum size is 3” x 3”.• Maximum width of a French Miter drawer front is 46”.• The following accessory items are available glazed:Base, Colony, Regal (with rope or dentil detail), Royal,Designer and Windsor Mouldings, Fluted Fillers,Rosette 237 and Valances.• Trained craftsman manually apply the glazed finish onall matching accessory items. Due to this manualfinishing, the build up of glaze may vary from one part toanother. This variance is considered an acceptablecharacteristic of glazed finishing and parts will not bereplaced or redone due to these variations.• Fingerpulls, mullions, specialty lazy susan doors, ormulti-panel doors are not available for this series.• Portabella styles are produced as shown. Variation oninside and outside profiles is not available.• Portabella products are only available from KYproduction facility.• The following grid outlines the minimum and maximumdimensions for French Miter doors, drawer fronts andframes using standard stile and rail dimensions shownabove.Door withPNL3 / PNL4MinimumDoor withPNL1 / PNL2MinimumDrawer Frontwith PNL3/PNL4MinimumDrawer Frontwith PNL1/PNL2MinimumMaximum*Doors and Fronts Width Height Width Height Width Height Width Height Width HeightFM300 9.1 9.1 7.5 7.5 9.1 6.2 7.5 5 28.5 96FM301 9.1 9.1 7.5 7.5 9.1 6.2 7.5 5 28.5 96FM302 9.1 9.1 7.5 7.5 9.1 6.2 7.5 5 28.5 96Frames Minimum Maximum*FM300F 7.5 7.5 28.5 96FM301F 7.5 7.5 28.5 96FM302F 7.5 7.5 28.5 96All dimensions are in inches*While our manufacturing capabilities allow us to go to a height of 96”, product over 60” long will not be covered by ourwarranty. We highly recommend using multiple doors instead. If you do order unwarranted product over 60”, we recommendusing additional hinges to help control any warping that may occur. 28.5” is our absolute maximum width.12866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuidePortabella Series - Traditional MiterTM400TM400TM401TM401TM400PNL1TM400PNL3TM401PNL1TM401PNL3TM400F2.30FrameTM400F2.30FrameTM401FFrame2.30TM401F2.30Frame2.05TM400DPNL12.05TM400DPNL32.05TM401DPNL12.05TM401DPNL3Drawer FrontDrawer FrontDrawer FrontDrawer FrontMetallic Frames with Acrylic InsertsMF100MF200MF100MF200Hinge Cup Depth2-11 13

Portabella Series - Traditional MiterProduct Specifications• TM400 is available in Caramel Glazed Bisque thermofoilwith PNL1 or PNL3.• TM401 is available in Walnut Glazed Summerflame orBlonde Maple thermofoil with PNL1 or PNL3.• MF100 and MF200 are profile wrapped with finishedpaper and are only available with acrylic inserts.• Portabella door and drawer front orders have a leadtimeof 6 business days. Orders that also include glazedaccessory items have a leadtime of 10 business days.• One square foot minimum charge will apply for eachpiece.• Standard panel grain direction: vertical for doors,horizontal for drawer fronts. Vertical direction availableon drawer fronts if noted.• All accessory items are available in identical matchingfoils except MF100 and MF200.• Hinge cup hole depth cannot exceed 11.5mm on theMF100.• Slab drawer fronts are available. Standard graindirection is horizontal. Minimum size is 3” x 3”.• The following accessory items are available glazed:Base, Colony, Regal (with rope or dentil detail), Royal,Designer and Windsor Mouldings, Fluted Fillers,Rosette 237 and Valances.• Trained craftsman manually apply the glazed finish onall matching accessory items. Due to this manualfinishing, the build up of glaze may vary from one part toanother. This variance is considered an acceptablecharacteristic of glazed finishing and parts will not bereplaced or redone due to these variations.• Fingerpulls, mullions, specialty lazy susan doors, ormulti-panel doors are not available for this series.• Portabella styles are produced as shown. Variation oninside and outside profiles is not available.• Portabella products are only available from our KYproduction facility.• The following grid outlines the minimum and maximumdimensions for Traditional Miter doors, drawer fronts,and frames using standard stile and rail dimensionsshown.TM400 SlabTM401 SlabDoor withPNL3MinimumDoor withPNL1MinimumDrawer Frontwith PNL3MinimumDrawer Frontwith PNL1MinimumMaximum*Doors and Fronts Width Height Width Height Width Height Width Height Width HeightTM400 9 9 7 7 6.5 6.5 5.5 5.5 30 80TM401 9 9 7 7 6.5 6.5 5.5 5.5 30 80MF100 and MF200 - - 7 7 - - 5.5 5.5 30 80Frames Minimum Maximum*TM400F 7 7 30 80TM401F 7 7 30 80MF100 and MF200 7 7 30 80All dimensions are in inches*While our manufacturing capabilities allow us to go to a height of 80”, product over 60” long will not be covered by ourwarranty. We highly recommend using multiple doors instead. If you do order unwarranted product over 60”, we recommendusing additional hinges to help control any warping that may occur. 30” is our absolute maximum width.14866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuidePortabella Series - ShakerSH500SH500SH501SH500PNL1SH500PNL2SH501PNL1SH500FSH500FSH501F2.70Frame2.70Frame2.70Frame1.77SH500DPNL11.77SH500DPNL21.77SH501DPNL1Drawer FrontDrawer FrontDrawer Front2-11 15

Portabella Series - ShakerProduct Specifications• SH500 is available in Rustic Cherry, Bisque and SnowWhite thermofoils. Rustic Cherry is available with PNL1.Snow White and Bisque are available with PNL1 orPNL2.• SH501 is available in Majestic Walnut thermofoil withPNL1.• Standard leadtime is 6 business days.• One square foot minimum charge will apply for eachpiece.• Standard panel grain direction: vertical for doors,horizontal for drawer fronts. Vertical direction availableon drawer fronts if noted.• Slab drawer fronts are available. Standard graindirection is horizontal. Minimum size is 3” x 3”.• All accessory items are available in identical matchingfoils.• Fingerpulls, mullions, specialty lazy susan doors, ormulti-panel doors are not available for this series.• Portabella styles are produced as shown. Variation oninside and outside profiles is not available.• Portabella products are only available from our KYproduction facility.• The following grid outlines the minimum and maximumdimensions for Shaker doors, drawer fronts and framesusing standard stile and rail dimensions shown above.Door MinimumDrawer FrontMinimumMaximum*Doors and Fronts Width Height Width Height Width HeightSH500, SH501 9 9 9 5 28.5 96Frames Minimum Maximum*SH500F, SH501F 9 9 28.5 96All dimensions are in inches*While our manufacturing capabilities allow us to go to a height of 96”, product over 60” longwill not be covered by our warranty. We highly recommend using two doors instead. If you doorder unwarranted product over 60”, we recommend using additional hinges to help control anywarping that may occur. 28.5” is our absolute maximum width.16866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideGlazed SeriesBreckenridgeStonebridgeClassicAmesbury II1.75 1.702.250.852.10 1.402.25 .601.75 0.45 1.252.25 1.200.502.10.401.102.25.95 .502.003.20Frame/Mullion Frame/Mullion Frame/MullionFrame/Mullion2.002.95Manchester IIManchester III3.804.003.00.50 .853.00 .50 .853.00Frame/Mullion2.403.00Frame/MullionDrawer FrontDrawer Front2-11 17

Glazed SeriesProduct Specifications• Glazed products are only available from our KYproduction facility.• Glazed products are available in Amati Walnut, AntiqueSatin, Antique White, Bisque, Candlelight, CherryBlossom, Hard Rock Maple, Honey Alder, MajesticWalnut, Natural Apple, Rustic Cherry, Sienna WildApple, Snow White, Summerflame and White Satinthermofoils.• Available in Charcoal, Walnut or White glaze.• Glazed product leadtimes: standard = 10 days,remakes/rushes = 5 days.• Trained craftsman manually apply the glazed finish onthis product. Due to this manual finishing, the build upof glaze may vary from one part to another. Thisvariance is considered an acceptable characteristic ofglazed finishing and parts will not be replaced orredone due to these variations.• One square foot minimum charge will apply for eachpiece.• The following accessory items are available glazed:Base, Colony, Regal (with rope or dentil detail), Royal,Designer and Windsor Mouldings, Fluted Fillers,Rosette 237 and Valances.• Glazed Breckenridge and Classic doors are alsoavailable in arch and cathedral styles.• Multi-panels are available, except Manchester styles.• Standard glass route is shown in frame drawings. T-slot option is available except on Manchester styles.See Accessory section for more details.• 3/4" MDF with white melamine back is standard.Matching melamine backs are available for selectwoodgrains for an additional charge. See Foil ReferenceChart for availability.• Fingerpulls are available for an additional charge excepton Manchester styles.• Standard grain direction: vertical for doors, frames andmullions, horizontal for drawer fronts.• Drawer front height will determine the options for full rail,reduced rail or slab styles. If the height is equal to orgreater than the dimensions listed under 'squareminimum', fronts will have standard rail dimensionsshown on drawings above. If the height is less than the'square minimum' and equal to or greater than the'reduced rail minimums', fronts will have a 1" centerpanel and floating rails. Heights under the minimum forreduced rail will be slab..38• Slab drawer fronts are available onManchester styles. Minimum size is3” x 3”.• Named profiles are produced as shown. Select Seriesoutside profiles are available on Amesbury II,Breckenridge, Classic, and Stonebridge by request.Note that if a different outside profile is selected onStonebridge, it will replace the highlight groove shownabove.• The following grid outlines the minimum and maximumdimensions for glazed doors, frames and mullions usingstandard stile and rail dimensions shown in drawings.Stile and rail dimensions can be altered except onManchester styles.18866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideGlazed SeriesStandard Mullions Width Height Width Height Width Height Width HeightBreckenridge 11.75 11.75 12.75 12.75 12.75 12.75 31 60Stonebridge 13.5 13.5 - - - - 31 60Classic 12.25 12.25 13.25 13.25 13.25 13.25 31 60Amesbury II 13 13 - - - - 31 60Manchester II, III 14.5 14.5 - - - - 31 60Standard MullionHeightNumber ofLites11.75” up to 24” 424” up to 31” 631” up to 41” 841” up to 60” 10Specialty MullionsSquareMinimum(for full rails)7 LiteMinimumArchMinimum9 LiteCountryMinimumCathedralMinimum9 LiteRomanMinimumReduced RailMinimumMaximum*Doors and Fronts Width Height Width Height Width Height Width Height Width HeightBreckenridge 7.875 7.875 10.875 10.875 10.875 10.875 7.875 5.91 48 96Stonebridge 7.25 7.25 - - - - 7.25 4.36 48 96Classic 8.125 8.125 11.125 11.125 11.125 11.125 8.125 5.3 48 96Amesbury II 8.5 8.5 - - - - 8.5 3.52 48 96Manchester II, III 10 10 - - - - 8.25 5.85 48 96Frames Width Height Width Height Width Height Width HeightBreckenridge 8.5 8.5 9.0 9.0 9.5 9.5 31 60Stonebridge 11 11 - - - - 31 60Classic 9.125 9.125 9.625 9.625 10.125 10.125 31 60Amesbury II 10.5 10.5 - - - - 31 60Manchester II, III 11.75 11.75 - - - - 31 60MaximumWidth Height Width Height Width Height Width HeightBreckenridge 16 16 16 16 16 16 31 60Stonebridge 17 17 17 17 - - 31 60Classic 16.375 16.375 16.375 16.375 16.375 16.375 31 60Amesbury II 16.5 16.5 16.5 16.5 - - 31 60Manchester II, III 18.375 18.375 18.375 18.375 - - 31 60All dimensions are in inches*While our manufacturing capabilities allow us to go to 48” x 96”, product over 31” wide or 60” long will not becovered by our warranty. We highly recommend using multiple doors instead. If you do order unwarranted product over31” or 60”, we recommend using additional hinges to help control any warping that may occur.2-11 19

Heritage SeriesCumberlandStaffordStonebridgeAmesbury II2.802.001.402.250.852.25 .603.25 0.552.001.170.902.25 1.200.502.25.95 .503.00Frame/Mullion2.90Frame/Mullion3.20Frame/Mullion2.95Frame/MullionProduct Specifications• Available in all foil selections, except High Gloss.• One square foot minimum charge will apply for eachpiece.• 3/4" MDF with white melamine back is standard.Matching melamine backs are available for selectwoodgrains for an additional charge. See Foil ReferenceChart for availability.• Fingerpulls are available for an additional charge.• Standard grain direction: Vertical for doors, frames &mullions, horizontal for drawer fronts.• Standard glass route is shown in frame drawings. T-slotoption is available. See Accessory section for moredetails.• Drawer front height will determine the options for full rail,reduced rail or slab styles. If the height is equal to orgreater than the dimensions listed under 'squareminimum', fronts will have standard rail dimensionsshown on drawings above. If the height is less than the'square minimum' and equal to or greater than the'reduced rail minimums', fronts will have a 1" center paneland floating rails. Heights under the minimum for reducedrail will be slab.• Named profiles are produced as shown. Select Seriesoutside profiles are available by request. Note that if adifferent outside profile is selected on Stonebridge, it willreplace the highlight groove shown above.• The following grid outlines the minimum and maximumdimensions for Heritage doors, frames and mullions usingstandard stile and rail dimensions shown above. Stile andrail dimensions can be altered.20866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideHeritage SeriesMinimum(for full rails)Reduced RailMinimumMaximum*Doors and Fronts Width Height Width Height Width HeightCumberland 7.75 7.75 7.75 3.37 48 96Amesbury II 8.5 8.5 8.5 3.52 48 96Stafford 7.875 7.875 7.875 5 48 96Stonebridge 7.25 7.25 7.25 4.36 48 96Frames Width Height Width HeightCumberland 10.5 10.5 31 60Amesbury II 10.5 10.5 31 60Stafford 10.375 10.375 31 60Stonebridge 11 11 31 60Standard Mullions Width Height Width HeightCumberland 13.125 13.125 31 60Amesbury II 13 13 31 60Stafford 13.375 13.375 31 60Stonebridge 13.5 13.5 31 60Standard MullionHeightNumber ofLites13” up to 24” 424” up to 31” 631” up to 41” 841” up to 60” 10Specialty Mullions7 LiteMinimum9 LiteCountryMinimumMaximumCumberland 16.625 16.625 16.625 16.625 31 60Amesbury II 16.5 16.5 16.5 16.5 31 60Stafford 17.375 17.375 17.375 17.375 31 60Stonebridge 17 17 17 17 31 60All dimensions are in inches*While our manufacturing capabilities allow us to go to 48” x 96”, product over31” wide or 60” long will not be covered by our warranty. We highly recommendusing multiple doors instead. If you do order unwarranted product over 31” or 60”,we recommend using additional hinges to help control any warping that may occur.2-11 21

Traditional SeriesClassicManchester IIManchester IIINorthwoods2.10 1.403.804.003.952.10.401.103.00.50 .853.00 .50 .853.35.50 .852.00Frame/Mullion3.00Frame/Mullion2.403.00Frame/Mullion3.34Frame/MullionDrawer FrontDrawer FrontDrawer FrontWellington2.05 1.852.10 0.40 1.002.00Frame/Mullion22866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideTraditional SeriesProduct Specifications• Classic and Wellington are available in all foilselections. Northwoods, Manchester II, andManchester III are available in all foils except HighGloss.• Classic and Wellington doors are also available in archand cathedral styles.• 3/4" MDF with white melamine back is standard.Matching melamine backs are available for selectwoodgrains for an additional charge. See FoilReference Chart for availability.• Fingerpulls and multi-panel doors are available for anadditional charge except on Northwoods andManchester styles.• A one square foot minimum charge will apply to eachpiece.• Standard grain direction: Vertical for doors, frames &mullions, horizontal for drawer fronts.• Standard glass route is shown in frame drawings. T-slot option is available except on Manchester styles.See Accessory section for more details.• Drawer front height will determine the options for full rail,reduced rail or slab styles. If the height is equal to orgreater than the dimensions listed under 'squareminimum', fronts will have standard rail dimensionsshown on drawings above. If the height is less than the'square minimum' and equal to or greater than the'reduced rail minimums', fronts will have a 1" centerpanel and floating rails. Heights under the minimum forreduced rail will be slab..38• Slab drawer fronts are available onManchester II and Manchester III.Minimum size is 3” x 3”.• Named profiles are produced as shown. Select Seriesoutside profiles are available on Classic and Wellingtonby request.• The following grid outlines the minimum and maximumdimensions for Traditional doors, frames and mullionsusing standard stile and rail dimensions shown above.Stile and rail dimensions can be altered except onNorthwoods, Manchester II, and Manchester III.2-11 23

Traditional SeriesSquareMinimum(for full rails)ArchMinimumCathedralMinimumReduced RailMinimumMaximum*Doors and Fronts Width Height Width Height Width Height Width Height Width HeightManchester II, III 10 10 - - - - 8.25 5.85 48 96Northwoods 10 10 - - - - 10 4.03 48 96Classic 8.125 8.125 11.125 11.125 11.125 11.125 8.125 5.3 48 96Wellington 8.625 8.625 11.625 11.625 11.625 11.625 8.625 6.47 48 96Frames Width Height Width Height Width Height Width HeightManchester II, III 11.75 11.75 - - - - 31 60Northwoods 11.75 11.75 - - - - 31 60Classic 9.125 9.125 9.625 9.625 10.125 10.125 31 60Wellington 8.875 8.875 9.375 9.375 9.875 9.875 31 60Standard Mullions Width Height Width Height Width Height Width HeightManchester II, III 14.5 14.5 - - - - 31 60Northwoods 14.5 14.5 - - - - 31 60Classic 12.25 12.25 13.25 13.25 13.25 13.25 31 60Wellington 11.875 11.875 - - - - 31 60Standard MullionHeightNumber ofLites11.875” up to 24” 424” up to 31” 631” up to 41” 841” up to 60” 107 LiteMinimum9 LiteCountryMinimum9 LiteRomanMinimumMaximumSpecialty Mullions Width Height Width Height Width Height Width HeightManchester II, III 18.375 18.375 18.375 18.375 - - 31 60Northwoods 18.375 18.375 18.375 18.375 - - 31 60Classic 16.375 16.375 16.375 16.375 16.375 16.375 31 60Wellington 15.875 15.875 15.875 15.875 15.875 15.875 31 60All dimensions are in inches*While our manufacturing capabilities allow us to go to 48” x 96”, product over 31” wide or 60” long will not becovered by our warranty. We highly recommend using multiple doors instead. If you do order unwarranted product over31” or 60”, we recommend using additional hinges to help control any warping that may occur.24866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideShaker SeriesShakerShaker EliteLancasterLancaster Elite2.000.152.002.000.152.002.000.15 0.502.000.15 0.502.000.15 0.502.000.15 0.501.881.881.881.88Frame/MullionFrame/MullionFrame/MullionFrame/MullionShaker with OgeeBradford2.000.252.000.182.00 0.25 1.002.00 0.18 0.501.88Frame/Mullion1.88Frame/Mullion2-11 25

Shaker SeriesProduct Specifications• Available in all thermofoil selections. High Gloss is notwarranted against warp.• Outside profile on all shakers is B111. Other SelectSeries outside profiles are available by request.• Paintable Shaker (raw face and sides) with melamineback is available but will not have a drop-in panel and isnot warranted against warp.• 3/4” MDF with white melamine back is standard.Matching melamine backs are available for selectwoodgrains for an additional charge. See Foil ReferenceChart for availability.• Fingerpulls are available for an additional charge.• Standard glass route is shown in frame drawings. T-slotoption is available. See Accessory section for moredetails.• A one square foot minimum charge will apply to eachpiece.• Standard grain direction: Vertical for doors, frames &mullions, horizontal for drawer fronts.• Drawer front height will determine the options for full railor slab styles. If the height is equal to or greater than thedimensions listed under 'square minimum', fronts willhave standard rail dimensions shown on drawingsabove. Drawer fronts with heights less than the 'squareminimum' must be slab or slab with vertical lines onLancaster and Lancaster Elite.• The following grid outlines the minimum and maximumdimensions for Shaker doors, frames and mullions usingstandard stile and rail dimensions shown above. Stileand rail dimensions can be altered.26866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideShaker SeriesMinimum(for full rails)ReducedCenter PanelMinimumMaximum*Doors and Fronts Width Height Width Height Width HeightShaker 8 8 8 3 48 96Shaker Elite 8 8 8 3 48 96Lancaster 8 8 8 3 48 96Lancaster Elite 8 8 8 3 48 96Shaker with Ogee 8 8 8 3 48 96Bradford 8 8 8 3 48 96Frames Width Height Width HeightShaker 8.375 8.375 31 60Shaker Elite 8.375 8.375 31 60Lancaster 8.375 8.375 31 60Lancaster Elite 8.375 8.375 31 60Shaker with Ogee 8.375 8.375 31 60Bradford 8.375 8.375 31 60Standard Mullions Width Height Width HeightShaker 10.875 10.875 31 60Shaker Elite 10.875 10.875 31 60Lancaster 10.875 10.875 31 60Lancaster Elite 10.875 10.875 31 60Shaker with Ogee 10.875 10.875 31 60Bradford 10.875 10.875 31 60Standard MullionHeightNumber ofLites10.875” up to 24” 424” up to 31” 631” up to 41” 841” up to 60” 10Specialty Mullions7 LiteMinimum9 LiteCountryMinimumMaximumShaker 14.375 14.375 14.375 14.375 31 60Shaker Elite 14.375 14.375 14.375 14.375 31 60Lancaster 14.375 14.375 14.375 14.375 31 60Lancaster Elite 14.375 14.375 14.375 14.375 31 60Shaker with Ogee 14.375 14.375 14.375 14.375 31 60Bradford 14.375 14.375 14.375 14.375 31 60All dimensions are in inches*While our manufacturingcapabilities allow us to go to48” x 96”, product over 31”wide or 60” long will not becovered by our warranty. Wehighly recommend using multipledoors instead. If you do orderunwarranted product over 31” or60”, we recommend usingadditional hinges to help controlany warping that may occur.2-11 27

Custom Thermofoil Product GuideContemporary SeriesAvieroCortinaItalia IIElegante II1.000.501.201.251/8" radius2.251.252.501.252.251.252.251.252.00Frame/Mullion2.25Frame/Mullion2.00Frame/Mullion2.00Frame/MullionNovaraTurinoA1.05B3/8" radius1/8" radiusAB1.051.201.252.251.252.00Frame/Mullion2.00Frame/Mullion28866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideContemporary SeriesParallelPulseAA2.37B0.250.50.125.8750.440.111.750.11A B A BB.8752.502.502.752.752.00Frame2.00Frame2.252.25Product Specifications• Available in all thermofoil selections.• 3/4" MDF with white melamine back is standard.Matching melamine backs are available for selectwoodgrains for an additional charge. See Foil ReferenceChart for availability. Parallel and Pulse are on 7/8" MDFwith Black, White or Maple melamine back.• Raw doors with melamine back are available but are notwarranted against warp.• Fingerpulls are available for an additional charge excepton Cortina, Parallel and Pulse.• Mullions are not available on Parallel or Pulse.• Standard glass route is shown in frame drawings. T-slotoption is available. Parallel and Pulse frames are onlyavailable with T-slot routing. See Accessory section formore details.• A one square foot minimum charge will apply to eachpiece.• Standard grain direction: vertical for doors, frames andmullions, horizontal for drawer fronts.• Pulse and Parallel are only available from our MNproduction facility.• The following grid outlines the minimum and maximumdimensions for Contemporary doors, frames andmullions.2-1129

Contemporary SeriesSquareMinimumMaximum*Doors and Fronts Width Height Width HeightAviero 4 4 48 96Cortina 3.5 3.5 48 96Elegante II 3 3 48 96Italia II 3.5 3.5 48 96Novara 3.5 3.5 48 96Turino 3.5 3.5 48 96Parallel 6.3 3 48 96Pulse 4.5 4.5 48 96Frames Width Height Width HeightAviero 8.5 8.5 31 60Cortina 8.5 8.5 31 60Elegante II 8.5 8.5 31 60Italia II 8.5 8.5 31 60Novara 8.5 8.5 31 60Turino 8.5 8.5 31 60Parallel 9 9 31 60Pulse 9.5 9.5 31 60Standard Mullions Width Height Width HeightAviero 11.75 11.75 31 60Cortina 11.75 11.75 31 60Elegante II 11.75 11.75 31 60Italia II 11.75 11.75 31 60Novara 11.75 11.75 31 60Turino 11.75 11.75 31 60Standard MullionHeightNumber ofLites11.75” up to 24” 424” up to 31” 631” up to 41” 841” up to 60” 10Specialty Mullions7 LiteMinimum9 Lite CountryMinimumAll dimensions are in inchesMaximumAviero 16.5 16.5 16.5 16.5 31 60Cortina 16.5 16.5 16.5 16.5 31 60Elegante II 16.5 16.5 16.5 16.5 31 60Italia II 16.5 16.5 16.5 16.5 31 60Novara 16.5 16.5 16.5 16.5 31 60Turino 16.5 16.5 16.5 16.5 31 60*While our manufacturing capabilities allow us to goto 48” x 96”, product over 31” wide or 60” long willnot be covered by our warranty. We highlyrecommend using multiple doors instead. If you doorder unwarranted product over 31” or 60”, werecommend using additional hinges to help control anywarping that may occur.Note: Exercise care when boring hinge holes for thesedoors styles. Depth cannot exceed 12.7 mm. Reviewboring specifications and tolerances as door edgeprofiles are thin.30866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideSelect SeriesSelect from a variety of profiles and thermofoils to design your owndoors and drawer fronts. Create a unique look to suit any decor andpersonalize your kitchen, bath or home office.To design your own doors and drawer fronts use your NorthernContours order form and follow these steps:1Door Style Options2Inside Profile OptionsSlab Square Arch Cathedral2 Pass2.00 1.252.00 1.102.05 1.602 Pass profiles,A511, and A901will have radiuscorners.2.002.000.50 1.202.002.000.40 1.252.002.000.55 1.20Frame/MullionFrame/MullionFrame/MullionA109A174A2013 Pass2.001.502.00 1.501.95 1.65Most 3, 4 and 5 Passprofiles will havesquare corners.2.00 0.40 1.002.00 0.55 1.252.000.392.00 2.00Frame/MullionFrame/MullionA107A3012.00Frame/MullionA5010.902.30 1.202.00 1.652.300.452.000.50 1.252.00Frame/MullionA7311.002.00Frame/MullionA901 (radius corner)2-1131

Select Series2More Inside Profile OptionsMost 3, 4 and 5 Passprofiles will havesquare corners.4 Pass2.00 1.551.75 1.702.27 1.072.00 1.122.00 0.55 1.251.75 0.45 1.252.27 0.40 1.002.00 0.38 1.132.002.002.252.00Frame/MullionFrame/MullionFrame/MullionFrame/MullionA302A401A402A4035 Pass1.75 1.502.20 1.852.55 1.101.80 0.400.852.20 0.55 1.252.55 0.20.852.002.002.00Frame/MullionA105Frame/MullionA511 (radius corner)Frame/MullionA951Frame/MullionA9613Outside Profile Options1/16" radius1/8" radius3/8" radius1/2" radius.19B099B111B038B127B104.25.28 .50.37.38B110B132B102B158B10832866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideSelect Series4Drawer Front StyleChoose a drawer front style - slab orprofiled. Profiled drawer fronts will have thesame inside and outside profiles as doorsand slab drawer fronts will have the sameoutside profile.Drawer front height will determine theoptions for full rail, reduced rail or slabstyles. If the height is equal to or greaterthan the dimensions listed under 'squareminimum', fronts will have standard raildimensions shown on drawings above. Ifthe height is less than the 'squareminimum' and equal to or greater than the'reduced rail minimums', fronts will have a1" center panel and floating rails. Heightsunder the minimum for reduced rail will beslab.8910Square FootageCalculate the square footage (inches: W x H÷ 144 or mm: W x H ÷ 92903.04), roundingto the nearest hundredth.PricingConsult Foil Reference Chart to determineFoil Group. Use Foil Group and number ofpasses to determine square foot price onCatalog Price Sheet.Customer ServiceIf you have any questions, pleasecontact Customer Service.toll free: 877.998.1814e-mail: orders@northerncontours.comFull RailReduced Rail567Slab • Available in all foil selections.ThermofoilChoose a foil from actual foil or productsamples. Do not rely on photo reproductionor written descriptions. Please specify theFoil Number on the order form.Matching BacksChoose a matching back if desired forselect woodgrains. White melamine back isstandard if a match is not specified.Matching backs are subject to anupcharge. Options are listed in the FoilReference Chart.SizesDetermine sizes of doors and drawerfronts, measuring to the nearest 1/32" or1 mm in both width and height.Product Specifications• 3/4" MDF with white melamine back is standard.Matching melamine backs are available for selectwoodgrains for an additional charge. See Foil ReferenceChart for availability.• Doors, frames and mullions are available in slab, square,arch and cathedral styles.• Raw doors with melamine backs are available but arenot warranted against warp.• Fingerpulls are available for an additional charge excepton B108 and B127.• Standard glass route is shown in frame drawings. T-slotoption is available. See Accessory section for moredetails.• Standard grain direction: Vertical for doors, frames &mullions, horizontal for drawer fronts.• A one square foot minimum charge will apply to eachpiece.• The following grid outlines the minimum and maximumdimensions for Select doors, frames and mullions usingstandard stile and rail dimensions shown above. Stileand rail dimensions can be altered.2-11 33

Select SeriesSquareMinimum(for full rails)ArchMinimumCathedralMinimumReduced RailMinimumMaximum*Doors and Fronts Width Height Width Height Width Height Width Height Width HeightA109 - 2 Pass 7.625 7.625 10.625 10.625 10.625 10.625 7.625 5.47 48 96A174 - 2 Pass 7.375 7.375 10.375 10.375 10.375 10.375 7.375 5.15 48 96A201 - 2 Pass 8.25 8.25 11.25 11.25 11.25 11.25 8.25 6.12 48 96A107 - 3 Pass 8 8 11 11 11 11 8 5.87 48 96A301 - 3 Pass 8.25 8.25 11.25 11.25 11.25 11.25 8.25 6.17 48 96A501 - 3 Pass 8.25 8.25 11.25 11.25 11.25 11.25 8.25 6.2 48 96A731 - 3 Pass 7.5 7.5 10.5 10.5 10.5 10.5 7.5 5.4 48 96A901 - 3 Pass 8.25 8.25 11 11 11 11 8 6.3 48 96A302 - 4 Pass 8.25 8.25 11.25 11.25 11.25 11.25 8.25 6.25 48 96A401 - 4 Pass 7.875 7.875 10.875 10.875 10.875 10.875 7.875 6.4 48 96A402 - 4 Pass 8.25 8.25 9.6 9.6 9.6 9.6 8.25 5.13 48 96A403 - 4 Pass 7.24 7.24 10.5 10.5 10.5 10.5 7.24 4.74 48 96A105 - 5 Pass 7.54 7.54 10.54 10.54 10.54 10.54 7.54 6 48 96A511 - 5 Pass 8.25 8.25 11.25 11.25 11.25 11.25 8.25 5.85 48 96A951 - 5 Pass 9.2 9.2 12.2 12.2 12.2 12.2 9.2 6.7 48 96A961 - 5 Pass 8.36 8.36 11.36 11.36 11.36 11.36 8.36 6.3 48 96Frames Width Height Width Height Width Height Width HeightA109 - 2 Pass 8.25 8.25 8.75 8.75 9.25 9.25 31 60A174 - 2 Pass 8.625 8.625 9.125 9.125 9.625 9.625 31 60A201 - 2 Pass 9.125 9.125 9.625 9.625 10.125 10.125 31 60A107 - 3 Pass 8.82 8.82 9.32 9.32 9.82 9.82 31 60A301 - 3 Pass 9.125 9.125 9.625 9.625 10.125 10.125 31 60A501 - 3 Pass 8.75 8.75 9.25 9.25 9.75 9.75 31 60A731 - 3 Pass 9.5 9.5 10 10 10.5 10.5 31 60A901 - 3 Pass 8.59 8.59 9.09 9.09 9.59 9.59 31 60A302 - 4 Pass 9.375 9.375 9.875 9.875 10.375 10.375 31 60A401 - 4 Pass 8.5 8.5 9.0 9.0 9.5 9.5 31 60A402 - 4 Pass 8.9 8.9 9.4 9.4 9.9 9.9 31 60A403 - 4 Pass 8 8 10.5 10.5 10.5 10.5 31 60A105 - 5 Pass 8.25 8.25 8.75 8.75 9.25 9.25 31 60A511 - 5 Pass 9.375 9.375 9.875 9.875 10.375 10.375 31 60A951 - 5 Pass 9.75 9.75 10.25 10.25 10.75 10.75 31 60A961 - 5 Pass 9.75 9.75 10.25 10.25 10.75 10.75 31 60All dimensions are in inches34866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideSelect SeriesSquareMinimum(for full rails)ArchMinimumCathedralMinimumMaximumStandard Mullions Width Height Width Height Width Height Width HeightA109 - 2 Pass 11.5 11.5 12.5 12.5 12.5 12.5 31 60A174 - 2 Pass 11.875 11.875 12.875 12.875 12.875 12.875 31 60A201 - 2 Pass 12.375 12.375 13.375 13.375 13.375 13.375 31 60A107 - 3 Pass 11.75 11.75 12.75 12.75 12.75 12.75 31 60A301 - 3 Pass 12.75 12.75 13.75 13.75 13.75 13.75 31 60A501 - 3 Pass 11.625 11.625 12.625 12.625 12.625 12.625 31 60A731 - 3 Pass 12.75 12.75 13.75 13.75 13.75 13.75 31 60A901 - 3 Pass 11.875 11.875 12.875 12.875 12.875 12.875 31 60A302 - 4 Pass 12.75 12.75 13.75 13.75 13.75 13.75 31 60A401 - 4 Pass 11.75 11.75 12.75 12.75 12.75 12.75 31 60A402 - 4 Pass 12.9 12.9 13.9 13.9 13.9 13.9 31 60A403 - 4 Pass 12.75 12.75 13.75 13.75 13.75 13.75 31 60A105 - 5 Pass 11.25 11.25 12.25 12.25 12.25 12.25 31 60A511 - 5 Pass 12.75 12.75 13.75 13.75 13.75 13.75 31 60A951 - 5 Pass 13 13 14 14 14 14 31 60A961 - 5 Pass 12.5 12.5 13.5 13.5 13.5 13.5 31 60Standard MullionsNumber ofLites11.25” up to 24” 424” up to 31” 631” up to 41” 841” up to 60” 10Specialty Mullions7 LiteMinimum9 LiteCountryMinimum9 LiteRomanMinimumMaximumA109 - 2 Pass 15.75 15.75 15.75 15.75 15.75 15.75 31 60A174 - 2 Pass 16.125 16.125 16.125 16.125 16.125 16.125 31 60A201 - 2 Pass 16.625 16.625 16.625 16.625 16.625 16.625 31 60A107 - 3 Pass 15.75 15.75 15.75 15.75 15.75 15.75 31 60A301 - 3 Pass 16.625 16.625 16.625 16.625 16.625 16.625 31 60A501 - 3 Pass 15.5 15.5 15.5 15.5 15.5 15.5 31 60A731 - 3 Pass 17 17 17 17 17 17 31 60A901 - 3 Pass 16.125 16.125 16.125 16.125 16.125 16.125 31 60A302 - 4 Pass 17.25 17.25 17.25 17.25 17.25 17.25 31 60A401 - 4 Pass 16 16 16 16 16 16 31 60A402 - 4 Pass 16 16 16 16 16 16 31 60A403 - 4 Pass 17 17 17 17 17 17 31 60A105 - 5 Pass 15.25 15.25 15.25 15.25 15.25 15.25 31 60A511 - 5 Pass 17.25 17.25 17.25 17.25 17.25 17.25 31 60A951 - 5 Pass 17.25 17.25 17.25 17.25 17.25 17.25 31 60A961 - 5 Pass 16.25 16.25 16.25 16.25 16.25 16.25 31 60All dimensions are ininches*While our manufacturingcapabilities allow us togo to 48” x 96”, productover 31” wide or 60” longwill not be covered byour warranty. We highlyrecommend using multipledoors instead. If you doorder unwarranted productover 31” or 60”, werecommend using additionalhinges to help control anywarping that may occur.2-11 35

AccessoriesFrames and MullionsNorthern Contours offers a variety of frame andmullion styles. For details and availability see thedoor series section. Frames and mullions aresold without glass inserts.For Eclipse frames and mullions, specify left orright side (as seen when looking at the face ofthe frame) when ordering. The routed portion offrame and mullion backs can be painted for anadditional charge.Frame Eclipse 6 Lite 9 LiteFrame LeftCountry9 LiteRoman7 Lite 7 LiteEclipse RightGlass Retainer Clips andGlass Retainer StripsNorthern Contours routes 1/4” depth on frameand mullion backs for glass inserts. Thisstandard will accommodate glass retainer clips.We can also route for plastic retainer strips byspecial request. Standard T-slot routing is 3/8”deep. Routing accommodates 1/8” thick glass.See Glass Sizing Chart at the end of thiscatalog.Northern Contours has both retainer clips andclear panel retainer strips available for purchase.T-Slot Route.125Retainer Strip.375Retainer ClipLazy SusansThermofoil doors for Lazy Susans are typicallyprofiled on 3 edges and have no profile on the4th long edge. To specify this, please note in thenotes section of your order form “2 short, 1long.” This instructs the plant to profile 2 shortsides and 1 long side, leaving the 2nd long sidesquare. If your design varies, contact customerservice. Be sure to indicate left and rightorientation on your order form if required for archor cathedral profiles. Lazy susans are notavailable in Level, Portabella, or theNorthwoods, Manchester II, or Manchester IIIdoor styles.Lazy Susan Door36866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideAccessoriesMouldingsMouldings in a variety of styles are available inall thermofoil colors in 8’ lengths. Dentil andRope detail are available for the Regal crownmoulding profile. Note: Moulding drawings arenot to scale. Please refer to dimensionsprovided.3.423.001.11 3.361.62 2.28Designer Crown 1305 Regal Crown 13062.642.653.562.98Royal Crown 13092.17 1.971.29 2.11Straight Crown850241.29 2.11Cove Crown850231.03 1.87Colony Crown13041.97WindsorCrown 13071.05.92.751.07 1.47 .921.06Soffit Crown 13101.070.251.500.25Scribe 1408 Scribe 85022.751.061.25.690.33Cove 1405 Shoe 1410 Batten 1406OutsideCorner 1407.69OutsideCorner 11162.52.50Base 1308Base 84095.250.75ValancesValances are available in three styles. Theminimum width is 24”, maximum is 96” (ifwoodgrain is running vertically, the maximumwidth is 48”). If your design varies, please callfor a quote. Sides a, b, and c will have B099edge detail and side d will be profiled to matchdoors and drawer fronts unless otherwisespecified. All valances have a flat shoulder oneither side of the arch.side bRomanCathedralside aside dside cCountryCorner and End ShelvesShelves are available in two styles. Shelves are¾” thick with a melamine back. Corner shelfwidths are always equal, radius is determined bywidth. End shelf is available in Left End or RightEnd configurations. Default corner radius is 3”,unless otherwise specified. It can be equal to orsmaller than the shortest leg. Primary profilesare available with any Select Series outsideprofile. Secondary profile is B099. Minimumwidth is 6”, maximum is 24”.WidthsecondaryprofilesWidthprimaryprofileCorner ShelfDepthDepthWidthRight EndShelfWidthLeft EndShelf2-11 37

AccessoriesFillers and Fluted FillersFillers are available in fluted or slab styles.Standard flutes start and stop 1” from each endwith 1 flute per width inch. Minimum width is 2½”; maximum length is 96”. Fillers have B099edge detail. If square edge is required, order acut to size panel (edges will be raw). Fillers areavailable with any of the rosette styles we offer.Overlays and Fluted OverlaysOverlays are available in fluted or slab styles.Standard flutes start and stop 1” from each endwith 1 flute per width inch. Overlays will beprofiled on all four edges to match doors anddrawer fronts unless otherwise specified.Minimum width is 2 ½”; maximum length is 96”.Overlays are available with any of the rosettestyles we offer.RosettesRosettes may be added to fillers or orderedindividually. The 237 rosette is available withglaze in select thermofoils. Outside profiles onall rosettes are as shown. All rosettes are 3” x 3”,manufactured on 3/4” MDF.2.1251.512 1.974 2.700237 238239 1200Wine RacksScalloped and grid wine racks are available incustom sizes and are sold as 2 piece sets. Wineracks have B099 outside edges and all fouredges are pressed with foil. For scalloped style,minimum shoulder width is 1”. The scallop is3 1/2” and the space between scallops is 1/2”.For grid style, opening is 3 1/4” x 3 1/4”.Maximum width for either style is 46” withwoodgrain running vertically.2” Scalloped4” ScallopedGrid38866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideAccessoriesHeat ShieldsHeat shields are an excellent product forprotecting cabinets from possible damagecaused by excessive ambient heat(temperatures beyond the ANSI/KCMAstandard). Install them on cabinets near selfcleaningovens, broilers and dishwashers. Heatshields are 1.56” wide by 30” in length and .05”thick. They are fabricated from cold rolled steel,finished in a durable white, almond, or blackpowder coat, and predrilled for easy installation.Installation Instructions:Place heat strip against cabinet frame.Heat strip should be even with the frontedge of the cabinet doors withcountersunk holes towards back ofcabinet. Use four #6 flat head woodscrews to install each heat strip. (screwsnot included)Multi-Panel ProductsMulti-panel products can be produced in verticalor horizontal configurations for a variety ofapplications including tall cabinets, islands andpeninsula backs. Maximum horizontal width forvertical grain direction on either panel is 48”.Standard configuration will center panelbetween all stiles and rails. If your design varies,send a drawing and contact customer service.Multi-Panels are not available on any Portabella,Manchester or Northwoods door styles.Grain Direction48” MaximumGrain DirectionAppliance PanelsAppliance panels are available for yourrefrigerator and dishwasher (design permitting)to give your kitchen a finished look. Pleasecheck your appliance manufacturer'sspecifications on sizes, critical dimensions,panel thickness, etc. before ordering. They areavailable in 2 configurations. Please callcustomer service for more information andpricing.Option 1(limited styles)Option 2(panel attached and supplied by customer)2-11 39

AccessoriesSurfacing OptionsSeveral surfacing or accessory components areavailable for use in fabricating new cabinetry orrefacing existing cabinets. Our surfacingmaterials are intended for cold roll lamination only.Some materials are sensitive to heat pressing.• Cut to size panels - in thicknesses of 1/8”,1/4”, 1/2”, 5/8” and 3/4”. Thermofoil or acrylicapplied to panels so they may be integratedinto new cabinet construction or refacingapplications. Edges are raw. 1/2” is onlyavailable out of our MN facility.• Beadboard - 1/4” thickness in full sheets (4’ x8’) or half sheets (4’ x 4’ or 2’ x 8’). Available inall thermofoils except High Gloss. Charcoal,Walnut and White glaze is available on selectthermofoils (see Foil Reference Chart forselections). Back and edges are raw.• Norlam - Thermofoil or acrylic on a phenolicbacker. It can be applied with contact adhesivesimilar to high pressure laminates.• PSA - Thermofoil or acrylic with a pressuresensitive adhesive. You will achieve the bestadhesion by thoroughly cleaning the surfaceand then lightly sanding. This material isavailable in 2’ x 8’ or 4’ x 8’ sheets for allthermofoil and 4’ x 8’ for acrylic / 2DLselections.• Raw Thermofoil or Acrylic - Thermofoilavailable by the lineal foot, measuring aminimum of 52" in usable width. Acrylic isapproximately 4’ x 8’. Thermofoil can beapplied with most contact adhesives. Acrylicrequires a water based adhesive. Werecommend testing a small sample with youradhesive before proceeding.Component Option Guide for Cabinet Fabrication or RefacingCabinet Component Thermofoil Portabella LevelFinished EndsCut to Size Panels 1/8”, 1/4”, 1/2”, 5/8”, 3/4” 1/8”, 1/4”, 1/2”, 5/8”, 3/4” 1/4”, 3/4”4’ x 8’ Laminated Sheets Yes Yes YesNorlam Yes Yes YesPSA Yes Yes YesDoor Overlay Yes Yes YesRaw Material Yes Yes YesEdgebandingSelect High Gloss andWoodgrainsLazy Susan Doors 2 Short, 1 Long, 1 No Profile Standard Door Edges OnlyNoABS banding: 3D Aluminum,Steel Gloss, Color MatchedStandard Edges, ExtendedDoor WidthAppliance Panels Door Applied to 1/4” Door Applied to 1/4” Door Applied to 1/4”Oven Frames Yes Yes NoCrown Mouldings Yes Yes Yes, 3DL onlyTrim Mouldings Yes Yes Yes, 3DL onlyToe Kick Yes, on 1/4” Yes, on 1/4” Yes, on 1/4”Fillers Yes Yes Yes, 2-7/8” Minimum WidthLight Rails Filler, One Long Edge Filler, One Long Edge Split FillerValances Yes Yes Yes, Square OnlyCorner / End Shelves Yes Yes NoWainscot / Island BacksFull Doors, Multi-PanelDoors, Cut to Size LaminatedSheetsFull Doors, Cut to SizeLaminated SheetsFull Doors, Cut to SizeLaminated SheetsFinished Cabinet Bottoms / Uppers 1/8”, 1/4” Cut to Size Panels 1/8”, 1/4” Cut to Size Panels 1/4” Cut to Size PanelsFinished Cabinet InteriorsBuild from Laminated Sheets,Line with Cut to Size, Coverwith Norlam or PSABuild from Laminated Sheets,Line with Cut to Size, Coverwith Norlam or PSABuild from Laminated Sheets,Line with Cut to Size, Coverwith Norlam or PSA40866.344.8132 • www.northerncontours.com

Custom Thermofoil Product GuideAppendixGlass Sizing ChartAll back side glass routes are designed for.125” (1/8”) thickness glass. Subtract thedimension below from the overall doorwidth/height for proper glass width/height.Subtracting these dimensions allows for .06”(1/16”) spacing around all sides of glass. Thesize obtained should have a tolerance of +0minus .06” to ensure proper glass fit.StandardRouteT - SlotPortabella SeriesFM300F/FM301F/FM302F 5.525 N/ATM400F/TM401F 4.725 N/ASH500F/SH501F 5.525 N/AGlazed SeriesAmesbury II 6.025 5.525Breckenridge 4.125 3.625Classic 4.125 4.125Stonebridge 6.525 6.025Manchester II, III 6.125 N/AHeritage SeriesAmesbury II 6.025 5.525Cumberland 6.125 5.625Stafford 5.971 5.471Stonebridge 6.525 6.025Traditional SeriesClassic, Wellington 4.125 4.125Manchester II, III 6.125 N/ANorthwoods 6.809 6.809Shaker SeriesAll Shaker Styles 3.875 3.425Contemporary SeriesAviero, Elegante, Italia,Novara, Turino4.125 3.625Cortina 4.625 4.125Parallel N/A 4.125Pulse N/A 4.625Select SeriesAll Select Series Styles,except A4024.125 3.625A402 4.625 4.125All dimensions are in inches2-1141