PTC Control Modes and Ancillaries - Actionair

PTC Control Modes and AncillariesAncillariesThe Actionair Control Modes are supported byvarious additional panels/equipment. Theserange from comprehensive smoke controlsystems (Actionpac LNS3) and bespokeelectromechanical panels (Actionpac EMB),which are described in other publications(available from the website), to those itemsdescribed below which are available asstandard accessories.Please note: Actionpac EMS Control Panelis not suitable for 2P or 3P Type ControlModes.AccessoriesOther Electrical AccessoriesActionpac EMS Control PanelThis product has been developed to provide a standard solution for the control ofsmall groups of dampers. The panels can control up to 12, 24 or 36 dampersrespectively. The panels offer individual damper position status, zonal dampertesting, max 2 zones of 6 (per 12 dampers), fire alarm inputs per group of 12 dampers and voltfree outputs for BMS monitoring in the case of alarms or faults. This product has its owndetailed catalogue available and the Actionair Sales Office may be contacted for specific details.EMS 12 - 24 24V AC XNNN00268 Actionpac EMS 12 - 24EMS 12 - 230 230V AC XNNN00267 Actionpac EMS 12 - 230EMS 24 - 24 24V AC XNNN00270 Actionpac EMS 24 - 24EMS 24 - 230 230V AC XNNN00269 Actionpac EMS 24 - 230EMS 36 - 24 24V AC XNNN00272 Actionpac EMS 36 - 24EMS 36 - 230 230V AC XNNN00271 Actionpac EMS 36 - 230A range of indicator panels, push button switches and damper test units are also available. The housingfor these units are manufactured in rigid ABS plastic. The Damper Connection Box is in galvanised steel.Damper Test UnitReset and release indication.Spring bias (power OFF) test switch.Power normally ON.Damper Status IndicatorReset and release indication.Damper Control UnitSwitch ON/OFF function.Reset and release indication.M5 and M6 – 2P Damper Control UnitSwitches power and open/closed.Open and closed indication.Damper Connection Box(All Voltages)M5 – 3P – CMS Control UnitDTU24 24V AC/DC XNNN00010DTU120 120V AC XNNN00305DTU230 230V AC DNNN00029DSI24 24V AC/DC DPNN00412DSI120 120V AC XNNN00308DSI230 230V AC DPNN00413DCU24 24V AC/DC XNNN00309DCU120 120V AC XNNN00310DCU230 230V AC XNNN00311M52PDCU 24V AC/DC XNNN00313M62PDCU 230V AC XNNN00314DCB 24V –230V AC/DC XNNN00312M5 – 3P – CMS 24V AC/DC XNNN00315M5 – 3P – CMS (230V)M5 – 3P –CMS 230V AC XNNN00599(230V)Damper Release and Indication Module(DRIM)This is designed for control and monitoringof the electrically operatedSmokeShield PTC Fire and Smokedampers.It will operate from 24, 120 or 230 voltsupplies, 50 or 60 Hz.Selection of the operating voltage is byuse of internal links on the PCB,prior to installation and connectionof actuator and supply.The DRIM may be used singly toprovide local damper control, or inpairs to provide control from eitherside of a damper. It can alsooperate 2 actuators when dampersare provided in 2 multiple sectionsLED position and operation indicationis provided.Operation is by push button to closeand twist to re-open damper.Tested to BS EN 61010 -1: 2001 andis CE compliant.IP44 rated.Operating range 5 - 40 degrees C.DRIM 24V – 230V AC/DC XNNN00589Ruskin Air Management LimitedSouth Street, Whitstable, Kent CT5 3DU England.Tel: 01227 276100 Fax: 01227 264262Email: sales@actionair.co.uk Website: www.actionair.co.ukRuskin Air Management Limitedis a ISO 9001 and 14001registered companyLNNN00113