GM MFD Auction - Maynards Industries

Maynards, as acting agent of General Motors CorporationGENERAL MOTORS METAL FABRICATION DIVISIONPUBLIC AUCTION2000TONWED & THURS, MARCH 28 & 29 @ 10AMPreview & Inspection: Tues., March 27 from 9am-6pm or by appointment2800 WEST SAGINAW ST. • LANSING, MI216x108BEDDANLY TS4-2000-216-108T Transfer PressIndustries (1991) Inc.Auctions • Liquidations • Appraisals21700 Northwestern Hwy.Suite 1180Southfield MI 48075www.maynards.comTel: (248) 569-9781Fax: (248) 569-9793Visit OurNewWebsite!www.maynards.com• Industrial Auctions & Liquidations• Consumer Product Liquidations• Fine Art & Antiques Auctions• Appraisals • Contact Information & More

2000TON3000TON1989DANLY TS4-2000-216-108T Transfer PressHITACHI ZOSEN TS8-2000-1000-108-108x108 Transfer PressTRANSFER PRESSES• DANLY Model TS4-2000-216-108TF Four Point SingleAction Transfer Press, 2000 Ton, 216”x108” Bed, 30”Stroke, 79” SH, 2” Adjustment, 12-24 SPM, Windows,Front To Back Dual Rolling Bolster, s/n 89-4164-04, 1989,w/Destaker System (H1)• HITACHI ZOSEN Model TS8-2000-108-108x108 EightPoint Dual Ram Transfer Press, 108”x108” Bed both Rams,2000 Ton and 1000 Ton Rams, 30” Stroke, 54” SH, 2”Adjustment, Dual Rolling Bolsters Front to Back on BothRams, s/n 10-4666, 1986, w/Destaker System (H2)STRAIGHT SIDE PRESSESWITH FEED LINES• DANLY Model S4-1000-180-96 Four Point Single ActionStraight Side Press, 1000 Ton, 180”x96” Bed, 18” Stroke,70” SH, 16” Adjustment, 8-24 SPM, Approximately94”x33” Windows, Rolling Bolster, s/n 76347701, 1976,w/Automatic Feed Co. Model 894 Entry Feeder 12”-94”Max Width, .090-.167 Max Thickness, Automatic Feed Co.Model 7-494 Straightener, .090-.187 Max Width x 94”Straightener, Automatic Double End Cone Type DecoilerWith Coil Car (J11)• DANLY Model SE2-2000-120-60 Eccentric Geared FourPoint Single Action Straight Side Press, 2000 Ton, 120”x60”Bed, Approximately 50”x50” Windows, s/n 79377401,1979, w/Automatic Feed Co. Model 848DC Entry Feeder,7”-48” Max, .025-.250 Max Thickness, s/n 4116, w/Automatic Feed Co. Model 7-348STR Straightener, .025-.250 Max Thickness, 48” Max Width, s/n 4114, w/Automatic Feed Co. Model 504872 Decoiler, 50,000#Capacity, 7-48” Max Width, 36”-72” Max OD, 20”-24” MaxID, s/n 4112 (J2)• DANLY Model S4-800-144-96 Four Point Single ActionStraight Side Press, 800 Ton, 144”x96” Bed, 24” Stroke,77” SH, 24” Adjustment, 11-14 SPM, Windows, s/n66230404, 1966, w/Automatic Feed Co. Model 884 Feeder,16”-84’ Max Width, .020-.120 Max Thickness w/AutomaticFeed Co. Model 7-384 Straightener, .020-.120 x 84” MaxWidth, s/n 83013, w/Automatic Feed Co. Model 4 Shear/Peeler Roll, w/Automatic Feed Co. Model 72848U DoubleEnd Decoiler, 72,000# Cap, 16”-84” Max Width, 36”-84”Max OD, 20”-28” Max ID (J5)• VERSON Model S2-800-120-60T Two Point Single ActionStraight Side Press, 800 Ton, 120”x60” Bed, 16” Stroke,48” SH, 12” Adjustment, 14 SPM, Windows, s/n 12536,1956, w/Automatic Feed Co. Model 848DC Entry Feeder,7”-48” Width, .025-.250 Max Thickness, w/Automatic FeedCo. Model 7-348 Straightener, .025-.250 Max Thickness x48” Max Width, w/Automatic Feed Co. Model 504872Decoiler, 50,000# Capacity, 6”-48” Max Width, 36”-72”Max OD, 20”-24” Max ID (J6)• VERSON Model S2-800-120-60T Two Point Single ActionStraight Side Press, 800 Ton, 120”x60” Bed, 16” Stroke,46” SH, 8½” Adjustment, 14 SPM, Approx. 36”x36”Windows, s/n 8638, 1951, w/Sesco Model 49-430 Feeder,36” Max Width, w/Sesco Model 53-262 Staightener, w/SescoModel 55-572 Decoiler, 50,000# Cap w/Coil Car (J7)• VERSON Model S2-800-120-60T Two Point Single ActionStraight Side Press, 800 Ton, 120”x60” Bed, 16” Stroke,46” SH, 10” Adjustment, 16-24 SPM, Windows, s/n 1068,1954, w/Perfecto 36” Entry Feeder, w/Coil JoiningTechnologies Model H76F Straightener, s/n970974GENWST1, w/Littell Model C504 50,000# Cap,.125” x 32” Max Width Coil Cradle/Straightener (J17)• VERSON Model S2-800-120-60T Two Point Single ActionStraight Side Press, 800 Ton, 120”x60” Bed, 16” Stroke,48” SH, 12” Adjustment, 16-24 SPM, Windows, s/n 12924,1956, w/Littell 36” Wide Entry Feeder, s/n 73222-7, w/Littell .125 x 32” Max Width Coil Cradle/Straightener, w/Littell 50,000# Cap Decoiler, s/n 79530-2-73 (J18)• VERSON Model S2-800-120-60T Two Point Single ActionStraight Side Press, 800 Ton, 120”x60” Bed, 16” Stroke,46” SH, 10” Adjustment, 16-24 SPM, Windows, s/n 8640,1951, w/Automatic Feed Co. Model 832 Entry Feeder, .065-.250 Max Thickness, 6”-32” Max Width, s/n 3787, w/LittellCoil Cradle/Straightener, s/n 79207-72 (J19)continued next page180x96BEDWINDOWS144x96BED2AVAILABLE1000TONWINDOWSDANLY S4-1000-180-96 Straight Side PressDANLY S4-800-144-96 Straight Side Presses2

2000TON2AVAILABLEDANLY SE2-2000-120-60Straight Side PressDANLY S4-600-108-84Straight Side PressPRESSES w/FEED LINES continued• DANLY Model S2-800-84-48 Four Point Single ActionStraight Side Press, 800 Ton, 84”x48” Bed, 18” Stroke,39” SH, 12” Adjustment, 18-36 SPM, Approximately34”x34” Windows, s/n 72308001, 1972, w/Littell Model12-32 Entry Feeder, .030-.250 Max Thickness x 32” Width,Littell Model 832-5PD Straightener, .030-.250 MaxThickness x32” Width Waterfall Type Straightener/Decoiler,30,000# Cap, 72” OD, 36” Width With Coil Car (J10)• DANLY Model S4-600-108-84 Four Point Single ActionStraight Side Press, 600 Ton, 108”x84” Bed, 18” Stroke,39” SH, 12” Adjustment, 20-36 SPM, Approximately77”x28” Windows, s/n 72312601, 1972, w/Littell Feederand Littell Model 79992-72 Cone Type Waterfall Decoiler/Straightener (J9)• NIAGARA Model BP2-400-60-42 Two Point Single ActionStraight Side Press, 400 Ton, 60”x42” Bed, 8” Stroke, 46”SH, 12” Adjustment, 30-80 SPM, Windows, s/n 46188,w/Littell Entry Feeder s/n 79629-73, w/Littell Model 632D-7PD-VS Straightener, .020-.150 Max Thickness x 30” MaxWidth, w/Littell Model S200-36 Decoiler, 20,000# Cap,36” Max Width, 66” Max OD, 20”-24” ID (J23)• DANLY Model S2-400-84-48 Two Point Single ActionStraight Side Press, 400 Ton, 84”x48” Bed, 18” Stroke,50” SH, 12” Adjustment, 18-36 SPM, Approximately36”x33” Windows, s/n 78365701, 1978, w/Automatic FeedCo. Entry Feeder, 7”-36” Max Width, .020-.188 MaxThickness, w/Automatic Feed Co. Model 7-436Straightener, .025-.188 Max Thickness x 36” Max Width,144x96BEDDANLY S4-600-144-96 Straight Side Pressesw/Automatic Feed Co. Model 4036-72 Single End Decoiler,40,000# Cap, 6”-36” Max Width, 36”-72” Max OD, 20”-24” Max ID (J8)• CLEARING Model S2-400-48-30 Two Point Single ActionStraight Side Press, 400 Ton, 48”x30” Bed, 6” Stroke,33 ½” SH, 3½” Adjustment, s/n 5518342P, 1955, w/Automatic Feed Co. .025-.188 Max Thickness, 26” MaxWidth Entry Feeder, w/Littell Model 626D-C150 CoilCradle/ Straightener, 15,000# Cap, 62” OD Diameter(J20)• DANLY Model S4-300-108-72 Four Point Single ActionStraight Side Press, 300 Ton, 108”x72” Bed, 16” Stroke,45 ½” SH, 10-20 SPM, 12” Adjustment, Windows, s/n69280401, 1969, w/Littell 60” Width Feeder, w/LittellStraightener, s/n 77682-70, w/Littell Decoiler, 20,000#Cap, s/n 77684-70 (J15)• BLISS Model E4-300-108-72 Four Point Single ActionStraight Side Press, 300 Ton, 108”x72” Bed, 16” Stroke,49 ½” SH, 12” Adjustment, 10-20 SPM, Windows, s/nS800191 w/Automatic Feed Co. Model 860 Entry Feeder,.030-.090 Thickness, 6”-60” Max Width, w/LittellStraightener .025-.078 Max Thickness, 60” Max Width,s/n 71241-62, w/Littell Single End Decoiler w/Coil Car, s/n71243-62 (J16)• VERSON Model S2-250-108-66 Two Point Single ActionStraight Side Press, 250 Ton, 108”x60” Bed, Windows, s/n 8636, 1951, w/Littell Feeder, 48” Width w/LittellStraightener s/n 69001-61, w/Littell Decoiler s/n 78642-71, 20,000# Cap, w/Coil Car (J14)• MINSTER Model G2-200-72-36 Gap Frame Press, 200Ton, 72”x36” Bed, 8” Stroke, 30” SH, 8” Adjustment, s/nG2-200-72-20508, w/Automatic Feed Co. Model 618 EntryFeeder, 18” Max Width, .025-.188 Max Thickness, w/LittellCoil Cradle/Straightener Model C100, 10,000# Cap x 4”Width x .187” ThicknessSTRAIGHT SIDE PRESSES• (2) CLEARING Model S1-1500-54-48 Single Point StraightSide Presses, 1500 Ton, 54”x48” Bed, 44” SH, 12”Adjustment, 10 SPM, s/n 5016696P, 5117169P (8 & 9)• DANLY Model S4-800-144-96 Four Point Single ActionStraight Side Press, 800 Ton, 144”x96” Bed, 24” Stroke,77” SH, 24” Adjustment, 14 SPM, Dual Rolling BolsterLeft To Right, s/n 66230401, 1966• (4) CLEARING Model S2-800-132-60 Two Point SingleAction Straight Side Presses, 800 Ton, 132”x60” Bed, 24”Stroke, 69” SH, 15” Adj., 14 SPM, Windows, s/n 55-18212-P, 55-18213-P, 55-18211-P, Etc. (551, 552, 553, 554)• (2) DANLY Model S4-600-144-96 Four Point Single ActionStraight Side Presses, 600 Ton, 144”x96” Bed, 30” Stroke,62 ½” SH, 10” Adjustment, 20 SPM, Approximately36”x36” Windows, s/n 75343901, 80379401, 1980 And1975 (A13/B9)• (2) CLEARING Model S2-600-72-54 Two Point SingleAction Straight Side Press, 600 Ton, 72”x54” Bed, 16”Stroke, 38 ½” SH, 10” Adjustment, 16 SPM, s/n 6518338,6518459 (2 & 12)5AVAILABLEcontinued next pageDANLY S4-300-108-72Straight Side PressDANLY S2-800-84-48Straight Side PressVERSON S2-800-120-60TStraight Side Presses3BLISS E4-300-108-72Straight Side Press

WEAN UNITED Cut-To-Length Line AUTOMATIC FEED CO. Feed Line LITTELL Feed LinePRESSES continued• VERSON Model S2-500-96-54 Two Point Single ActionStraight Side Press, 500 Ton, 96”x54” Bed, 12” Stroke,33” SH, 6” Adjustment, 20 SPM, s/n 10712 (13)• BLISS Model SE1-500-42-48 Single Point Single ActionStraight Side Press, 500 Ton, 42”x48” Bed, 16” Stroke,33” SH, 10” Adjustment, 12 SPM, s/n CN-2591• BLISS Model SE1-500-48-42 Two Point Single ActionStraight Side Press, 500 Ton, 48”x42” Bed, 16” Stroke, 12SPM, s/n CN2591 (10)• BLISS Model SE2-300-72-42 Eccentric Geared SingleAction Straight Side Press, 300 Ton, 72”x42” Bed, 16”Stroke, 37” SH, 10” Adjustment, Windows (Press 3)DOUBLE ACTION PRESSES• DANLY Model DE4-1250-700-156-96QDC EccentricGeared Four Point Double Action Straight Side Press (A16)• CLEARING Model D2-1000-600-132-84 Two Point DoubleAction Straight Side Press, 132”x84” Bed, Inner Slide 1000Ton, 38” Stroke, 82” SH, 16” Adjustment, Blank Holder600 Ton, 24” Stroke, 80” SH, 16” Adjustment, 10 SPM, s/n 57-9004-P (700)OBI PRESSES/GAP PRESSES• (5) CLEARING Model 150-P701 OBI Presses, 150 Ton,50”x33” Bed, 8” Stroke, 25” SH, 5” Adjustment, 40 SPM,s/n 54-5146, 54-5147, 54-5148, 54-5145, 54-5144, 1972• NIAGARA Model S2G-200-72-42 Gap Press, 200 Ton,72”x42” Bed, 20” Stroke, 42” SH, 16” Adjustment, 25 SPM• (2) NIAGARA Model E-150 Gap Presses, 150 Ton, 50”x30”Bed, 12” Stroke, 7” Adjustment, 40 SPM, s/n 50164• (2) BLISS Model C-150S Gap Presses, 150 Ton• (3) WARCO 150 Ton OBI Presses, 8” Stroke, 22.5” SH,4.5” Adjustment, 35 SPM, 50”x30” Bed, s/n 55-426-1• VERSON G1 OBI Press, 150 Ton, 50”x30” Bed, 10” Stroke,30” SH, 8” Adjustment, 26 SPM, s/n 12874TANDEM LINESSYNCROMATIC TANDEM LINE A1:• DANLY Model D4-1000-600-108-72 Eccentric Geared FourPoint Double Action Straight Side Press, 108”x72” Bed,Inner Slide 1000 Ton, 36” Stroke, 64” SH, 18” Adjustment,Blank Holder 600 Ton, 34” Stroke, 54” SH, 18” Adjustment,20 SPM, Dual Rolling Bolster Left To Right, s/n 80379503,1980 w/Destaker• (4) DANLY Model S4-600-108-60 QDC Four Point SingleAction Straight Side Presses, 600 Ton, 108”x60” Bed, 32”Stroke, 77” SH, 16” Adjustment, 10-20 SPM, Dual RollingBolster Left To Right, s/n 80379808, 80379603, 80379807,80379805, 1980SYNCROMATIC TANDEM LINE A6:• DANLY Model D4-1000-600-108-72 Eccentric Geared FourPoint Double Action Straight Side Press, 108”x72” Bed,Inner Slide 1000 Ton, 36” Stroke, 64” SH, 18” Adjustment,Blank Holder 600 Ton, 34” Stroke, 54” SH, 18” Adjustment,20 SPM, Dual Rolling Bolster Left To Right, s/n 80379504,1980 with Destaker• (4) DANLY Model S4-600-108-60 QDC Four Point SingleAction Straight Side Presses, 600 Ton, 108”x60” Bed, 32”Stroke, 77” SH, 16” Adjustment, 10-20 SPM, Dual RollingBolster Left To Right, s/n 80379604, 80379811, 80379810,80379809, 1980TANDEM LINE B1:• DANLY Model D4-1600-900-144-96 Eccentric Geared FourPoint Double Action Straight Side Press, 144”x96” Bed,Inner Slide 1600 Ton, 38” Stroke, 82” SH, 22” Adjustment,Blank Holder 900 Ton, 30” Stroke, 80” SH, 22” Adjustment,7-14 SPM, Single Rolling Bolster Left To Right, s/n7864801, 1978, w/Destaker and (5) Atlas Die TransferCarts• (3) DANLY Model S4-800-144-96 Four Point Single ActionStraight Side Presses, 800 Ton, 144”x96” Bed, 24” Stroke,77” SH, 24” Adjustment, 14 SPM, Single Rolling BolsterLeft To Right, s/n 77363801, 77363802, 77363803TANDEM LINE B5:• DANLY Model D4-1600-900-144-96 Eccentric Geared FourPoint Double Action Straight Side Press, 144”x96” Bed, InnerSlide 1600 Ton, 38” Stroke, 82” SH, 22” Adjustment, BlankHolder 900 Ton, 30” Stroke, 80” SH, 22” Adjustment, 7-14SPM, Single Rolling Bolster Left To Right, s/n 662304302,1966, w/Destaker and (5) Atlas Die Transfer Carts4AVAILABLE• (3) DANLY Model S4-800-144-96 Four Point Single ActionStraight Side Presses, 800 Ton, 144”x96” Bed, 24” Stroke,77” SH, 24” Adj., 14 SPM, Single Rolling Bolster Left ToRight, s/n 66232803, 77363804, 77363805, 1966 & 1977TANDEM LINE C1:• IHI Model D4-2000-1250-144-96 Four Point Double ActionStraight Side Press, 144”x96” Bed, Inner Slide 2000 Ton,42” Stroke, 82” SH, 10” Adjustment, Blank Holder 1250Ton, 36” Stroke, 72” SH, 10” Adjustment, 8-16 SPM, DualRolling Bolster Left To Right, s/n AM2C-2D w/Destaker• (4) DANLY Model S4-800-132-84 Four Point Single ActionStraight Side Presses, 800 Ton, 132”x84” Bed, 32” Stroke,64 ½” SH, 24” Adjustment, 13-17 SPM, Dual RollingBolster Left To Right, s/n 71301501, 71301502, 71301503,72306901, 1971 & 1972TANDEM LINE D1:• DANLY Model DE4-800-500-120-84 Eccentric Geared FourPoint Double Action Straight Side Press, 120”x84” Bed,Inner Slide 800 Ton, 42” Stroke, 82” SH, 18” Adjustment,Blank Holder 500 Ton, 36” Stroke, 72” SH, 18” Adjustment,8/16 SPM, Dual Rolling Bolster Left To Right, s/n80382201, 1980, w/Destaker• (6) DANLY Model SE4-600-120-72 Eccentric Geared FourPoint Single Action Straight Side Presses, 600 Ton, 120”x84”Bed, 32” Stroke, 89” SH, 16” Adjustment, 16 SPM, DualRolling Bolster Left To Right, s/n 80382304, 80382301,80382306, 80382305, 80382303, 80382302, 1980SYNCROMATIC TANDEM LINE E1:• (3) DANLY Model SE4-800-108-54M QDC EccentricGeared Four Point Single Action Straight Side Presses, 800Ton, 108”x54” Bed, 24” Stroke, 60” SH, 12” Adjustment,15-25 SPM, Dual Rolling Bolster Left To Right, s/n63187205, 63187204, 63187202, 1963• (2) DANLY Model SE4-500-108-54M QDC EccentricGeared Four Point Single Action Straight Side Presses, 500Ton, 108”x54” Bed, 24” Stroke, 60” SH, 12” Adjustment,15-25 SPM, Dual Rolling Bolster Left To Right, s/n65227501, 63187404, 1963 & 1965continued next page5AVAILABLECLEARING 150-P701 OBI Presses CLEARING S2-800-132-60 Straight Side Presses DANLY S2-400-84-48 S/S Press4

ROLLINGBOLSTERS1980ROLLINGBOLSTERS108x72BED144x96BEDDANLY 600 Ton Syncromatic Tandem Line (A Line)DANLY 800 Ton Tandem Line (B Line)TANDEM LINE F1:• (3) DANLY Model SE4-800-108-54M QDC EccentricGeared Four Point Single Action Straight Side Presses, 800Ton, 108”x54” Bed, 24” Stroke, 60” SH, 12” Adjustment,15-25 SPM, Dual Rolling Bolster Left To Right, s/n64206802, 64198402, 64198401, 1964• (2) DANLY Model SE4-500-108-54M QDC EccentricGeared Four Point Single Action Straight Side Presses, 500Ton, 108”x54” Bed, 24” Stroke, 60” SH, 12” Adjustment,15-25 SPM, Dual Rolling Bolster Left To Right, s/n64198602, 64198601, 1964TANDEM LINE F6:• (3) DANLY Model SE4-800-108-54M QDC EccentricGeared Four Point Single Action Straight Side Presses, 800Ton, 108”x54” Bed, 24” Stroke, 60” SH, 12” Adjustment,15-25 SPM, Dual Rolling Bolster Left To Right, s/n64206803, 64206801, 63187208, 1963 & 1964• DANLY Model SE4-500-108-54M QDC Eccentric GearedFour Point Single Action Straight Side Presses, 500 Ton,108”x54” Bed, 24” Stroke, 60” SH, 12” Adjustment, 15-25SPM, Dual Rolling Bolster Left To Right, s/n 65227502, 1965TANDEM LINE G1:• DANLY Model D4-1600-900-144-96 Four Point DoubleAction Straight Side Press, 144”x96” Bed, Inner Slide 1600Ton, 38” Stroke, 80” SH, 22” Adjustment, Blank Holder900 Ton, 30” Stroke, 72” SH, 22” Adjustment, 14 SPM,Single Rolling Bolster Left To Right, s/n 66230301, 1966w/Destaker and Atlas Die Transfer Systems• DANLY Model S4-800-144-96 Four Point Single ActionStraight Side Presses, 800 Ton, 144”x96” Bed, 24” Stroke,77” SH, 24” Adjustment, 14 SPM, Single Rolling BolsterLeft To Right, s/n 66230403, 1966• DANLY Model SE4-500-144-84 Eccentric Geared FourPoint Straight Side Single Action Press, 500 Ton, 144”x84”Bed, 28” Stroke, 77” SH, 24” Adj., 20 SPM, No Windows,s/n 104442, 1972• (3) DANLY Model U4-1000-132-84 Four Point Straight SideSingle Action Underdrive Presses, 1000 ton, 132”x84” Bed,30” Stroke, 68” SH, 30” Adjustment, No Windows, s/n69288803, 69288802, 71302901, 1969 & 1971TANDEM LINE K1:• DANLY Model D2-1000-600-132-84QDC Two Point DoubleAction Straight Side Press, 132”x84” Bed, Inner Slide 1000Ton, 38” Stroke, 98” SH, 22” Adjustment, Blank Holder 600Ton, 38” Stroke, 96” SH, 22” Adjustment, 14 SPM, SingleRolling Bolster Left To Right, s/n 6219202, 1962 w/Destaker• (4) DANLY Model S2-800-144-60QDC Two Point SingleAction Straight Side Presses, 800 Ton, 144”x60” Bed, 30”Stroke, 77” SH, 18” Adj., 14 SPM, Single Rolling BolsterLeft To Right, s/n 70294606, 70294607, 70294608,70294609, 1970SYNCROMATIC TANDEM LINE K6 & K9:• (6) DANLY Model SE2-800-108-54QDC Eccentric GearedFour Point Single Action Straight Side Presses, 800 Ton,108”x54” Bed, 24” Stroke, 60” SH, 12” Adjustment, 15-25 SPM, Dual Rolling Bolster Left To Right, s/n 78370501,65227601, 66245101, 66245102, 63187207, 63187206,1978, 1966, 1965, 1963TANDEM LINE K12:• DANLY Model D2-1000-600-132-84QDC Two Point DoubleAction Straight Side Press, 132”x84” Bed, Inner Slide 1000Ton, 38” Stroke, 98” SH, 22” Adjustment, Blank Holder600 Ton, 38” Stroke, 96” SH, 22” Adjustment, 14 SPM,Single Rolling Bolster Left To Right, s/n 62169201, 1962w/Destaker• (4) DANLY Model S2-800-144-60QDC Two Point SingleAction Straight Side Press, 800 Ton, 144”x60” Bed, 30”Stroke, 77” SH, 18” Adjustment, 14 SPM, Single RollingBolster Left To Right, s/n 70294601, 70294602, 70294603,70294604, 1970TANDEM LINE L1:• DANLY Model D4-1600-900-144-96QDC Four PointDouble Action Straight Side Press, 144”x96” Bed, InnerSlide 1600 Ton, 38” Stroke, 99” SH, 22” Adjustment, BlankHolder 900 Ton, 28” Stroke, 97” SH, 22” Adjustment, 14SPM, Single Rolling Bolster Left To Right, s/n 83402301,1982 w/Destaker• (3) DANLY Model S4-500-144-96QDC Four Point SingleAction Straight Side Presses, 500 Ton, 144”x96” Bed, 24”Stroke, 75 ½” SH, 24” Adjustment, 14 SPM, Single RollingBolster Left To Right, s/n 62169001, 62169002, 62169003,66230402, 1962• DANLY Model S4-800-144-96QDC Four Point Single ActionStraight Side Press, 800 Ton, 144”x96” Bed, 24” Stroke,77” SH, 24” Adjustment, 14 SPM, Single Rolling BolsterLeft To Right, s/n 66230402, 1966TANDEM LINE L6:• (6) VERSON Model SE4-300-120-72 Eccentric GearedFour Point Single Action Straight Side Press, 300 Ton,120”x72” Bed, 32” Stroke, 77” SH, 10” Adjustment, 20SPM, Dual Rolling Bolster Left To Right, s/n 27208, 27209,27210, 27211, 27212, 27213, 1979, Entire Spare ClutchAssembly with Lead-off Press120x72BEDDUALROLLINGBOLSTERS108x54BEDDANLY 600 Ton Tandem Line (D Line) DANLY 500 Ton Syncromatic Tandem Line (E Line) DANLY 800 Ton Syncromatic Tandem Line (F Line)5

CINCINNATI Sabre 1250 Machining Center CINCINNATI Talon 208 Turning Center LUCAS Precision Horizontal Table-Type Boring MillMITTS & MERRILL Keyseater G&L BICKFORD Radial Drill EDM SOLUTIONS Explorer ZRC EDM CINCINNATI 1808 ShearCUT TO LENGTH LINE• WEAN UNITED Model 38600 Cut To Length Line includes DoubleEnd Decoiler, Weam United Oscillating Shear, 90” Max Width, WeamUnited Straightener, Weam United Press and Destaker, 1982ROBOTS• (OVER 120) ABB IRB6400 M94A Weld Robots, 2.4 meter reach,120 KG load capacity, Ranging from 1994-1996, S4 Control,Approximately 25-40,000 HRS• (OVER 30) NACHI Type AP Robot, AP Controller, 1996, w/LincolnDC-600 Welding Power Source and Lincoln NA-5R DC Arc WeldingSystem• (4) FANUC 420FD Robots w/RJ Controls• ZEISS Model UMC850 Bridge Type CMM, RenishawPH10M Probe, Renishaw PH10-2 Probe Interface• (2) ZEISS Model SMM Dual Arm Horizontal CMM,Renishaw PH10 Probe, Renishaw PHC10-2 ProbeHead Controller, Approximately 9’x9’ Steel LayoutTable, Approximately 20’X9’ Steel Layout Table• ZEISS Model PSM 421418 Dual Arm HorizontalCMM, Travels X-4200MM, Y-1400MM, Z-1800MM,Renishaw Probe, s/n 82548• ZEISS Model SMM-P 421618 Dual Arm HorizontalCMM, Travels X-4200MM, Y-1600MM, Z-1800MM,Renishaw PHC10-2 Probe Interface, s/n 80415INSPECTION EQUIPMENT• CORDAX Model 1015 Dual Arm Horizontal CMM,Approximately 10’x20’ Steel Layout Plate, Bendix 4Axis DRO, s/n 8307, 1983• BENDIX PORTAGE Model 48A Single Arm HorizontalCMM, Approximately 9’x7’ Steel Layout Table, Bendix3-Axis DRO, s/n 4791995• OPG Model OQ-14 Optical Comparator, 14” Screen,Projection II 2 Axis DRO• ROCKWELL Model 4DRB Hardness Tester• ROCKWELL Model 4JR Hardness Tester• QTY. OF INSPECTION ITEMS Including Calipers,Micrometers, Block Sets Etc5AVAILABLEBROWN & SHARPE 1030 Surface GrinderLODGE & SHIPLEY Engine LatheMODERN Die Seperators2AVAILABLEROCKWELL Hardness TesterTire Press TANNEWITZ Band Saw DOALL 3612 Band Saws HILL ACME Iron Worker6

75OVERZEISS UMC850 CMM ZEISS SMM-P421618 Dual Arm CMM LINCOLN Idealarc Welders30,000LB. CAP.100,000LB. CAP.ELWELL PARKER Die Truck ERICKSON PE1000A Die Truck TORIT 4DF64 Dust CollectorMACHINING CENTERS• CINCINNATI MILACRON Model Sabre 1250 Vertical Machining Center,Acramatic 850 Control, 20 ATC, 60”x30” Table, s/n 7037-A0191-1044TURNING CENTERS• CINCINNATI MILACRON Model Talon 208 CNC Turning Center,Acramatic 850 Control, s/n 68-08V08-91-062BORING MILLS• LUCAS Horizontal Table Type Boring Mill, 60”x110” Table, w/AnglePlatesLATHES• LODGE & SHIPLEY 20”x54” Engine Lathe, 1580RPM, 2 Axis DROEDM• EDM SOLUTIONS Type Explorer ZNL EDM w/EDMS75/10 Control, Sinker Type, s/n 8010KEYSEATER• MITTS & MERRILL Model 2024 Keyseater, s/n89021GRINDERS• BROWN & SHARPE Model 1030 MicromasterSurface Grinder, s/n 523-1030-2147• EXCELLO Center Grinder• BROWN & SHARPE Model #4 OD Grinder• (2) GARDNER Face Grinders• STERLING Drill Grinder• BALDOR Drill Sharpener• (OVER 5) HAMMOND, KALAMAZOO Double PedestalGrinders5AVAILABLE60 TONCAP.P&H 50/25 Overhead Cranes P&H 30/15 Overhead Crane P&H 60/25 Overhead CraneDAY ONEWed, March 28 @ 10amTool Room Equipment, MobileEquipment, Misc. Items,CMM’sDAY TWO*Thurs, March 29 @ 10amStamping Presses, Robots,Cranes*To be able to register for Day 2 we require a$100,000 deposit via certified check, wiretransfer or company check only ifaccompanied by a letter from your bankguaranteeing amount.30OVER OVER12075OVERNACHI AP Robots ABB 6400 Robots VIDMAR Cabinets7

SAWS• (2) DOALL Model 3613-2 Vertical Band Saw, 36” Throat,w/Blade Welder• (2) DOALL Model 3612-2 Vertical Band Saw, 36” Throat,w/Blade Welder• DOALL Model 36-2A Vertical Band Saw, 36” Throat, w/Blade Welder• DOALL Model 26-3 Vertical Band Saw, 26” Throat, w/Blade Welder• WELLS Model 8M Horizontal Band Saw, s/n 15935• KALAMAZOO Model H9AW Horizontal Band Saw• PEERLESS 11”x11” Hacksaw, s/n 950-B• EVERETT INDUSTRIES Model 1416 Cut Off Saw, s/n 9522• SCOTCHMAN Cut Off Saw• PEERLESS 7x7 Mechani-Cut Chop SawSHEARS• WYSONG Model 1072 Mechanical Shear, 10 Gauge x 6’,s/n P4-367• CINCINNATI Model 1808 Mechanical Shear, ¼” x 8’, s/n25314MILLING MACHINES• CINCINNATI Model 42130 Hydrotel Mill, Acramatic 850SXControl, Approximately 15’x4’ Table, s/n 9406633• CINCINNATI Model 330-18 Vercipower Vertical Mill ModelDH, s/n 311-31V52-1RADIAL ARM DRILLS/ DRILL PRESSES• G&L BICKFORD 6’x”13” Radial Arm Drill, s/n 452-00224-81• (2) CINCINNATI BICKFORD Chipmaster 4’x9” Radial ArmDrills, L Base, Box Table• (2) CINCINNATI BICKFORD Chipmaster 5’x13” Radial ArmDrills, L Base, Box Table, s/n 954-00244-79• AMERICAN Radial Arm Drill, 4’x9”, box table• LELAND-GIFFORD Model 2LVS Variable Speed Drill Press,1900 RPM• (2) CINCINNATI BICKFORD 20” Drill Press• (2) FOSDICK Dual And Single Station Drill PressesWELDING EQUIPMENT• (OVER 75) LINCOLN Idealarc DC1000, DC600, DC400Welding Equipment• MILLER Goldstar 452 AC-DC Welding Power Source• (OVER 20) LINCOLN Invertec V300-Pro Welding PowerSources• HYPOTHERM Powermax 1100 Welding Power Source• MILLER Deltaweld 452 Welding Power Source• MILLER Syncrowave 300 Welding Power Source• MEDAR 150KVA Spot Welder, 50” ThroatWOODWORKING EQUIPMENT• OLIVER Model No 116 Vertical Woodworking Band Saw• OLIVER Model 361-AB Planer• OLIVER Jointer• OLIVER Model No 94 Radial Arm Saw• Belt and Disk Sander, 6” Wide Belt• TANNEWITZ Vertical Woodworking Band SawGENERAL EQUIPMENT• HILL ACME Iron Worker• (6) TORIT Model SDF2 Dust Collectors• TORIT Model 4DF62 Dust Collector s/n 204850• TORIT Model VS1200 Dust Collector• SUPERIOR HM Hone, s/n 2200-120• (OVER 5) RIDGID Model 300 & 535 Pipe Threaders• (2) NEDERMAN Vacuums #20-4000, 2300cfm @ 5.6”Hg, w/Twin Filter Units and Control Systems• (2) OSTER Model 310 Pipe Threader• (2) SUNBEAM Heat Treat OvensGENERAL EQUIPMENT continued• PRATT & WHITNEY Model B 12” Slotter, s/n 557• ALLEGANY 50-Ton Crane Scale• (3) TRINCO Model 40X40SL DLX Dry Blast Cabinetw/Dust Collector• KALAMAZOO Belt Sander• (OVER 5) JOHNSTONE Sealant Pumps• (2) CIVES Model HP50 Cardboard Bailers• LAMINA Hydraulic Portable Drill Unit, s/n P1960V• (5) MODERN HYDRAULICS Die Separators• DAKE 100-Ton Shop Press• DAKE Arbor PressMOBILE EQUIPMENT• ERICKSON Model PE1000A, 100,000# Capacity DieTruck, 72 Volt, s/n 7696• (2) ELWELL PARKER 30,000# Capacity Electric Die Trucks• (2) MORMON Die Carts• Die Wagon/Cart 40,000# Capacity• HOBART 36-Volt Battery Charger• (OVER 30) 36-Volt Battery ChargersOVERHEAD CRANES• P&H 60/25 Ton Overhead Crane, 60 Ton Hook, 25 TonAuxiliary Hook, Twin Girder, Top Running, Pendant/RadioControl, 75’ Span, s/n C22125• (5) P&H 50/25 Ton Overhead Crane, 50 Ton Hook, 25 TonAuxiliary Hook, Twin Girder, Top Running, (1) Pendant/RadioControl, (4) Pendant Control, 65’ Span, s/n C21698B,C21982, C21699, C21983, C21981• NORTHERN 40/20 Ton Overhead Crane, 40 Ton Hook, 20Ton Auxiliary Hook, Twin Girder, Top Running, PendantControl, Approximately 75’ Span, s/n 13226• P&H 30/15 Ton Overhead Crane, 30 Ton Hook, 15 TonAuxiliary Hook, Twin Girder, Top Running, Pendant Control,Approximately 95’ Span, s/n C21980• NORTHERN CRANE 30/10 Ton Overhead Crane, 30 TonHook, 10 Ton Auxiliary Hook, Twin Girder, Top Running,Pendant/Radio Control, Approximately 75’ Span, s/n 13229• (2) NORTHERN CRANE 30/10 Ton Overhead Crane, 30 TonHook, 10 Ton Auxiliary Hook, Twin Girder, Top Running,Approximately 65’ Span, Pendant Control, s/n 13228, 12871• LARGE QTY. of Crane/Rigger Chains & Slings• (2 SETS) of Crane Jaws for Coiled SteelGANTRY CRANES• COMPLETE CRANE SERVICES 30-Ton Overhead Crane,30 Ton Hook, Twin Girder, Top Running, Pendant Control,Approximately 25’ Span, s/n CBG27884• CRANE COMPANY 9-Ton Overhead Crane, 9 Ton Hook,Twin Girder, Top Running, Pendant Control, Approximately30’ Span, s/n 11813• (3) COMPLETE CRANE SERVICES 9-Ton Overhead Cranes,9 Ton Hook, Twin Girder, Top Running, Pendant Control,Approximately 30’ Span, s/n CBG2925, CBG29074, 339370• COMPLETE CRANE SERVICES 5-Ton Overhead Crane, 5Ton Hook, Twin Girder, Top Running, Pendant Control,Approximately 25’ Span, s/n 85-339201MATERIALS• QTY. OF (OVER 75) VIDMAR Cabinets and VIDMAR WorkBenches, Portable Cabinets Etc · Qty. of Electrical andMechanical Parts and Components Including Fuses,Resistors, Transistors, Drives, AB, MODICON, PERTRONSwitches, Relays, Directional Valves, Rigging Chains, Etc.• (OVER 10) Flammable Storage CabinetsOFFICE EQUIPMENT• IT Equip: COMPAQ/HP/IBM/CTX/SUN MICROSYSTEMS• (75+) Computers • (75+) Monitors • (3) Plotters • (7)Servers • (20+) TV’s • (13) Amplifiers • Printers • OverheadProjectors • UPS Units • Network Equip. • Faxes, etc.8 9

Maynards, as acting agent of General Motors CorporationPUBLIC AUCTIONGENERAL MOTORS METAL FABRICATION DIVISION2800 WEST SAGINAW STREETLANSING, MI 48917Preview & Inspection:Tues., March 27 from 9am-6pm or by appointmentFEATURING:WED & THURS,MAR. 28 & 29/0710:00 AM• Up To 2000 Ton Transfer Presses •• (Over 45) Straight Side Presses Up To 2000 Tons •• (19) Tandem Lines Up To 800 Ton, 144”x96” Bed •• Tool Room • Inspection • Mobile • Etc. •Maynards Industries (1991) Inc.250 H StreetPMB 207Blaine WA 98230180x96BED2000TON216x108BEDDRIVING DIRECTIONS FROM CAPITAL CITY AIRPORT(LAN): Go East on W Circle Dr; Turn left onto CapitolCity Blvd; Turn right onto BUS I-96 (N Grand River Av);Turn left onto N Waverly Rd; Turn left onto BUS I-69(M-43, W Saginaw St); Arrive at 2800 W Saginaw St,Lansing, MI 48917 Approx. 12 min./4 milesDANLY S4-1000-180-96 Straight Side PressDAY ONEWed, March 28 @ 10amTool Room Equipment, MobileEquipment, Misc. Items • CMM’sDAY TWO*Thurs, March 29 @ 10amStamping Presses, Robots, Cranes*To be able to register for Day 2 we require a$100,000 deposit via certified check, wiretransfer or company check only if accompaniedby a letter from your bank guaranteeing amount.DANLY TS4-2000-216-108T Transfer PressTERMS AND CONDITIONSPAYMENT: All purchases must be paid in full the day of sale. Payment is cash, cashier’s check, certified check, wiretransfer, company check only if accompanied by a letter from your bank guaranteeing amount of check for deposit and/or payment in full. No personal checks. Full payment must be made before removal of purchase.All individuals attending the auction will be required to watch a safety protocol video and may possibly be subjectedto a physical inspection to verify goods and materials entering the plant.REMOVAL: Removal terms will be defined in the sale catalogue and at the registration desk. Everything is sold “As Is,Where Is”. All sales final. General Motors will provide material at loading dock/ramp location at the facility for pickup bythe purchaser at a time arranged by General Motors. While quantities and descriptions are believed to be accurate, theauctioneer, owners or counsel make no warranties or guarantees either expressed or implied as to authenticity, genuinenessof, or defects in any lot and will not be held responsible for any advertising discrepancies or inaccuracies. No warrantieswhatsoever are made as to condition, merchantibility or fitness for use of any item. May we suggest you take fulladvantage of the preview and inspection period. SALE SUBJECT TO ADDITIONS, DELETIONS AND PRIOR SALE.A 10% BUYERS PREMIUM APPLIES TO ALL SALESIndustries (1991) Inc.Auctions • Liquidations • Appraisals21700 Northwestern Hwy.Suite 1180Southfield MI 48075www.maynards.comTel: (248) 569-9781Fax: (248) 569-9793Visit OurNewWebsite!www.maynards.com• Industrial Auctions & Liquidations• Consumer Product Liquidations• Fine Art & Antiques Auctions• Appraisals • Contact Information & More