Urethane Cups - T.D. Williamson, Inc.

Dimensions and Part NumbersTDW Urethane Cups3040.002 - p2Type A — 2” through 14” (50 mm - 350 mm)Size Minimum ID Maximum ID WeightInches mm Part Number Inches mm Inches mm Lbs. Kg.2 50 00-1551-0002 1.938 49 2.062 52 0.1 .052* 50 00-1604-0002 2.062 52 2.250 57 0.1 .053 80 00-1551-0003 2.938 75 3.188 81 0.1 .053* 80 00-1604-0003 3.219 82 3.438 87 0.1 .054 100 00-1551-0004 3.938 100 4.188 106 0.2 0.14* 100 00-1604-0004 4.219 107 4.438 113 0.2 0.15 125 00-1551-0005 -- -- -- -- 0.4 0.26 150 00-1551-0006 5.938 151 6.312 160 0.8 0.46* 150 00-1604-0006 6.219 158 6.562 167 0.7 0.38 200 00-1551-0008 7.875 200 8.250 210 2.00 0.98* 200 00-1604-0008 8.219 209 8.562 217 1.30 .5910 250 00-1551-0010 9.812 249 10.375 264 2.30 1.0010* 250 00-1604-0010 10.250 260 10.625 270 2.60 1.2012 300 00-1551-0012 11.844 301 12.375 314 4.00 1.8012* 300 00-1604-0012 12.188 310 12.625 321 4.00 1.8014 350 00-1551-0014 13.0 330 13.562 344 5.00 2.3014* 350 00-1604-0014 13.188 335 13.875 352 5.00 2.30* For thin wall applicationsType A Scraper CupTDW Pigging Products P.O. Box 1121 Tulsa, Oklahoma 74101-1121 918-447-5400 Fax: 918-664-7091 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / © Copyright 2008. All rights reserved T.D. Williamson, Inc. / Printed in USA

Dimensions and Part NumbersTDW Urethane Cups3040.002 - p4VANTAGE ® IV, VANTAGE ® V, and OptionAll Pig Cups — 4” and LargerSize Standard RealSeal Minimum ID Maximum ID WeightInches mm Part Number Part Number Inches mm Inches mm Lbs. Kg.4 100 00-4120-0004 00-7457-0004-00 3.812 96 4.375 111 0.5 0.26 150 00-4120-0006 00-7457-0006-00 5.812 147 6.500 165 0.8 0.48 200 00-4120-0008-03 00-7457-0008-00 7.620 193 8.500 215 2.0 0.910 250 00-4120-0010-03 00-7457-0010-00 9.750 246 10.500 266 4.0 1.812 300 00-4120-0012-03 00-7457-0012-00 11.750 300 12.500 317 6.0 2.714 350 00-4120-0014-03 00-7457-0014-00 13.000 330 13.750 349 7.0 3.216 400 00-4120-0016 00-7457-0016-00 14.750 375 15.625 397 9.0 4.118 450 00-4120-0018 00-7457-0018-00 16.760 425 17.625 448 12 5.420 500 00-4120-0020 00-7457-0020-00 18.750 476 19.625 498 17 7.722 550 00-4120-0022 00-7457-0022-00 20.500 521 21.750 552 33 15.024 600 00-4120-0024 00-7457-0024-00 22.500 572 23.750 603 24 10.926 650 00-4120-0026 00-7457-0026-00 24.500 622 25.750 654 35 15.928 700 00-4120-0018 00-7457-0028-00 26.500 673 27.750 705 48 21.830 750 00-4120-0030 00-7457-0030-00 28.250 718 19.750 756 53 24.032 800 00-4120-0032 00-7457-0032-00 30.250 768 31.750 806 65 29.534 850 00-4120-0034 00-7457-0034-00 32.250 819 33.750 857 72 32.736 900 00-4120-0036 00-7457-0036-00 34.250 870 35.750 908 105 47.638 950 00-4120-0038 00-7457-0038-00 36.000 914 37.750 959 110 49.940 1000 00-4120-0040 00-7457-0040-00 38.000 965 39.750 1010 128 58.142 1050 00-4120-0042 00-7457-0042-00 40.000 1016 41.750 1060 153 69.448 1200 00-4120-0048 00-7457-0048-00 46.000 1168 47.750 1213 210 95.3VANTAGE ® IV, VANTAGE ® V, and OptionAll Pig CupsVANTAGE ® IV, VANTAGE ® V, and OptionAll RealSeal Pig CupsTDW Pigging Products P.O. Box 1121 Tulsa, Oklahoma 74101-1121 918-447-5400 Fax: 918-664-7091 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / © Copyright 2008. All rights reserved T.D. Williamson, Inc. / Printed in USA