Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc

Raymond ®Control PanelOrder No. SP4Mounting Holes are for3⁄8" Socket Head ScrewsPort on sidePortPortHigh Pressure Hose5,000 psi (345 bar) pressure ratingAramid Braided FiberPerforated outer coverfor pneumatic serviceMaximum working pressure—5,000 psi (345 bar)Minimum burst pressure—20,000 psi (1380 bar)The system pressure can be adjusted easily at the controlpanel. To lower pressure, simply open drain valve until thepressure drops to desired level. To raise pressure, hook upthe charging assembly’s female quick disconnect to themale nipple of the control panel. Open the valve on thenitrogen bottle and open the valve of the charging assemblyuntil desired pressure is reached. We do not however,recommend leaving the charging assembly hooked upwhen the die is running in the press.Aramid Braided Fiber• Meets or exceeds SAE 100R8 specificationsAramid reinforcement for compact strength and flexibility• Temperature range: -40°F to +200°F (-40°C to +93°C)• Couplings: 55 series, swaged or crimped• Hoses have permanently attached hose ends andcannot be assembled with normal hand tools.• Minimum hose length from end of fitting to end of fittingis 150 mm / 6 inches.• When ordering, specify length of hose in inches.Hose Support ClampOrder No. SP3• Prevents damage to hose• Provides support where long lengths are used• Minimizes hose chafing problems• Avoids twisting of hose lines• Keeps hose away from other moving objects