Live and Dead Centers - Discount-Tools.com

Heavy-Duty Bull Nose Live Centers■ Large workpiece center holes.■ Large piece parts.■ Riten full service and repair.Riten Bull Nose Centers are constructed with larger bearingsto carry heavier loads. The strength and alignment of the fullysupported bull nose gives longer center life when machininglarger workpieces. The rigidity of the center preventsvibration and chatter.For best results, choose a bull nose centerthat will place the workpiece in the middle ortoward the larger end of the 60˚ angle.This will balance the weight of the parton the center and help carry theload evenly over the bearings.MORSE TAPEREKAccuracy guaranteed to ± .00015FAW. P.Model MT A F E K Weight56412 2 4 1 3/8 4 9/32 200056413 3 4 1 3/8 4 9/32 380056414 4 4 1 3/8 4 9/32 480056415 5 4 1 3/8 4 9/32 480056523 3 5 2 3/8 3 13/16 380056524 4 5 2 3/8 3 13/16 480056525 5 5 2 3/8 3 13/16 480056633 3 6 1/2 3 3/8 3 29/32 380056634 4 6 1/2 3 3/8 3 29/32 480056635 5 6 1/2 3 3/8 3 29/32 480056636 6 6 1/2 3 25/32 4 5/16 4800MORSE TAPERJarno,Brown & Sharpe,and Straight ShanksAvailableEKAccuracy guaranteed to ± .0002FAW. P.Model MT A F E K Weight56945 5 9 4 15/32 6 5/8 700056946 6 9 4 15/32 6 5/8 1200056105 5 10 1/2 5 7/16 7 7/16 700056106 6 10 1/2 5 7/16 7 7/16 1500056107 7 10 1/2 5 7/16 7 7/16 1500056126 6 12 6 7/16 7 7/16 1500056127 7 12 6 7/16 7 7/16 1500025Call: 1-800-338-0027