Hytorc Avanti 50 Torque Chart - Haitor

Pressure Torque PressurePSI Kgm Nm Bar1500 996 9763 1041600 1064 10432 1101800 1201 11770 1242000 1337 13107 1382200 1470 14412 1522400 1603 15717 1652600 1737 17022 1792800 1870 18327 1933000 2003 19632 2073200 2137 20951 2203400 2272 22269 2343600 2406 23588 2483800 2541 24907 2624000 2676 26225 2764200 2799 27440 2904400 2923 28655 3034600 3047 29870 3174800 3171 31085 3315000 3295 32300 3455200 3420 33519 3585400 3544 34737 3725600 3668 35956 3865800 3793 37175 4006000 3917 38393 4146200 4037 39572 4276400 4157 40751 4416600 4278 41930 4556800 4398 43109 4687000 4518 44287 4827200 4654 45620 4967400 4790 46953 5107600 4926 48285 5247800 5062 49618 5388000 5198 50950 5528200 5326 52208 5658400 5455 53466 5798600 5583 54724 5938800 5711 55982 6079000 5840 57240 6209200 5948 58298 6349400 6056 59355 6489600 6163 60413 6629800 6271 61471 67610000 6379 62528 690HYTORC Avanti 50

IMPORTANT SAFETY INSTRUCTIONSWARNING: Your HYTORC TORQUE MACHINE is a power tool, and as with any power tool, certain safety precautions shouldbe observed to avoid accidents or personal injury. The following tips will assist you.• READ ALL INSTUCTIONS• KEEP WORK AREA CLEAN AND WELL LIT• CONSIDER WORK AREA ENVIRONMENT. Electrical Pumps should never be used in an atmosphere which can beconsidered potentially volatile. If there is any doubt, use an air pump. Also Note: metal to metal contact can cause sparks,precautions should be taken.• AVOID PREMATURE TOOL STARTING. The Pump Remote Control is for the TOOL OPERATOR only.• STAY CLEAR DURING OPERATION. In most cases, the tool will allow “hands free” operation. If the tool must be held orsteadied during operation, use alternative means of securing the tool to the application• GUARD AGAINS ELECTRIC SHOCK. Ensure the pump is properly grounded and the proper voltage is being used.• STORE IDLE TOOLS. When not in use, tool sand accessories should be properly stored to avoid deterioration• USE RIGHT TOOL. Don’t force small tools or attachments to do the job of a larger tool. Don’t use a tool for purposes not intended.• PROPER SAFETY ATTIRE. When handling/operating hydraulic equipment use work gloves, hard hats, safety shoes andother applicable clothing.• USE SAFETY GLASSES.• MOVING EQUIPMENT. Do not use hydraulic hoses, uni-swivels, pump power or remote cords as means of moving the equipment.• MAINTAIN TOOLS WITH CARE. For top performance, inspect tools, powerpack and accessories for visual damage frequentlyand always prior to use. Always follow instruction for proper tool and pump maintenance. Refer to the OperationsMaintenance Section for further clarification• STAY ALERT. Watch what you are doing. Use Common sense. Do not use power equipment under the influence of any moodaltering substances.• PRIOR TO OPERATIONEnsure that all hydraulic connections are securely connected and there is no leakage Verify that the Hydraulic hoses are not kinkedor otherwise damaged.Ensure the square drive and its retainer are fully and securely engaged.Be certain that all connectors, elbows, fitting and swivels are not bent, loose or damaged.• PRIOR TO USECheck sockets for size, quality and flaws. (Do not use if questionable)Cycle tool to ensure proper function. Locate a solid, secure reaction point.Be sure the reaction arm retaining clamp is fully engaged. Be sure the hydraulic hoses are free of the reaction point.Pressurize the system momentarily; if the tool tends to “ride up” or to “creep”, stop and re-adjust the reaction arm to a moresolid and secure position.NOTE: Remain clear of the reaction arm during operation and never put body parts between reaction arm and reaction surfaces.• ALWAYS USE QUALITY ACCESSORIES. Always use top quality impact sockets in good condition which are the correct size andfully engage the nut. Hidden flaws, however, remain a possibility which could cause breakage, so stay clear of sockets duringoperation• DO NOR USE other equipment to enhance performance (Hammer on Socket/Tool)NOTE: Hytorc Pumps are designed to operate Hytorc Tools only. Damage may occur to the pump or the product that is beingoperated due to misuse.SAVE THESE INSTRUCTIONS FOR FUTURE USE!