Hytorc Avanti 5 Torque Chart - Haitor

Pressure Torque PressurePSI Kgm Nm Bar1500 111 1090 1041600 119 1163 1101800 133 1308 1242000 148 1453 1382200 163 1599 1522400 178 1744 1652600 193 1889 1792800 208 2034 1933000 222 2180 2073200 237 2325 2203400 252 2470 2343600 267 2616 2483800 282 2761 2624000 297 2906 2764200 311 3052 2904400 326 3197 3034600 341 3342 3174800 356 3488 3315000 371 3633 3455200 385 3778 3585400 400 3924 3725600 415 4069 3865800 430 4214 4006000 445 4360 4146200 460 4505 4276400 474 4650 4416600 489 4796 4556800 504 4941 4687000 519 5086 4827200 534 5232 4967400 549 5377 5107600 563 5522 5247800 578 5667 5388000 593 5813 5528200 608 5958 5658400 623 6103 5798600 638 6249 5938800 652 6394 6079000 667 6539 6209200 682 6685 6349400 697 6830 6489600 712 6975 6629800 726 7121 67610000 741 7266 690HYTORC Avanti 5

IMPORTANT SAFETY INSTRUCTIONSWARNING: Your HYTORC TORQUE MACHINE is a power tool, and as with any power tool, certain safety precautions shouldbe observed to avoid accidents or personal injury. The following tips will assist you.• READ ALL INSTUCTIONS• KEEP WORK AREA CLEAN AND WELL LIT• CONSIDER WORK AREA ENVIRONMENT. Electrical Pumps should never be used in an atmosphere which can beconsidered potentially volatile. If there is any doubt, use an air pump. Also Note: metal to metal contact can cause sparks,precautions should be taken.• AVOID PREMATURE TOOL STARTING. The Pump Remote Control is for the TOOL OPERATOR only.• STAY CLEAR DURING OPERATION. In most cases, the tool will allow “hands free” operation. If the tool must be held orsteadied during operation, use alternative means of securing the tool to the application• GUARD AGAINS ELECTRIC SHOCK. Ensure the pump is properly grounded and the proper voltage is being used.• STORE IDLE TOOLS. When not in use, tool sand accessories should be properly stored to avoid deterioration• USE RIGHT TOOL. Don’t force small tools or attachments to do the job of a larger tool. Don’t use a tool for purposes not intended.• PROPER SAFETY ATTIRE. When handling/operating hydraulic equipment use work gloves, hard hats, safety shoes andother applicable clothing.• USE SAFETY GLASSES.• MOVING EQUIPMENT. Do not use hydraulic hoses, uni-swivels, pump power or remote cords as means of moving the equipment.• MAINTAIN TOOLS WITH CARE. For top performance, inspect tools, powerpack and accessories for visual damage frequentlyand always prior to use. Always follow instruction for proper tool and pump maintenance. Refer to the OperationsMaintenance Section for further clarification• STAY ALERT. Watch what you are doing. Use Common sense. Do not use power equipment under the influence of any moodaltering substances.• PRIOR TO OPERATIONEnsure that all hydraulic connections are securely connected and there is no leakage Verify that the Hydraulic hoses are not kinkedor otherwise damaged.Ensure the square drive and its retainer are fully and securely engaged.Be certain that all connectors, elbows, fitting and swivels are not bent, loose or damaged.• PRIOR TO USECheck sockets for size, quality and flaws. (Do not use if questionable)Cycle tool to ensure proper function. Locate a solid, secure reaction point.Be sure the reaction arm retaining clamp is fully engaged. Be sure the hydraulic hoses are free of the reaction point.Pressurize the system momentarily; if the tool tends to “ride up” or to “creep”, stop and re-adjust the reaction arm to a moresolid and secure position.NOTE: Remain clear of the reaction arm during operation and never put body parts between reaction arm and reaction surfaces.• ALWAYS USE QUALITY ACCESSORIES. Always use top quality impact sockets in good condition which are the correct size andfully engage the nut. Hidden flaws, however, remain a possibility which could cause breakage, so stay clear of sockets duringoperation• DO NOR USE other equipment to enhance performance (Hammer on Socket/Tool)NOTE: Hytorc Pumps are designed to operate Hytorc Tools only. Damage may occur to the pump or the product that is beingoperated due to misuse.SAVE THESE INSTRUCTIONS FOR FUTURE USE!