MicroLoc - Nortools

MicroLoc ® Workholding Systems Specification SheetSideclamps, Double-sidedClamp/Locator typeMV1 &MV3DMV1A52BCDEFGH3714.2 25.4 30 n/a 15 19 52 M10 - 1 2 0.21(50)IRecommendedtorque ft.lb(Nm)Qty jaws inclQty screws inclWeight kgPart numberMV1.SCA.DMMV1*59.53714.8 34 30 n/a 15 19 59.5 M10 - 1(50)20.3MV1.SCA.DLXMV3D72 15.8 25.4 50 n/a 15 19 71 M10 37(50)- 1 2 0.3MV3D.SCA.DLMV3D- - - - - - - - - - - ----MD603759.5 14.8 25.4 30 n/a 15 19 59.5 M10 - 1(50)20.24MD60.SA.DMD60*59.53714.7 40 30 n/a 15 19 59.5 M10 - 1(50)20.35MD60.SA.DXMD755066 14.7 25.4 37.5 n/a 15 19 65 M10 - 1(68)20.27MD75.SA.DSMD75sideclamp not availableas extended version- - - - - - - - - - - ----MD100735015.9 28.6 50 25 15 19 71 M10 - 1(68)30.34MD100.SA.DSfor use with MD100.200Aand MD100.210AMD100865015.9 28.6 50 25 15 19 71 M10 - 1(68)30.38MD100.SA.DLfor use with MD100.CBnotes:*Only for use when fittingclamping elements tooptional baseplate pitchi.e. when mounting MV1onto 60mm pitched bases,or when mounting MD60onto 75mm pitched bases.All elements are suppliedindividually.BFCGIIEADHMicron Workholding Limited, Nene Road, Bicton Industrial Park, Kimbolton, Cambridgeshire PE28 0LF UKTel: +44 (0)1480 861321 Fax: +44 (0)1480 861515email: sales@microloc.com web: www.microloc.com27