2010 iZIP Bicycle Owners Manual - Bicycle Center of Seattle

Seat and Handlebar Mounting ReflectorsFirst attach the reflector to the reflector bracket with the reflector screw, see the topdiagram. Next, remove the clamp screw and open the clamping reflector bracket.Place clamping reflector bracket around the handlebar or seatpost. If the clamp istoo loose, insert a rubber spear inside of the clamp. Tighten the clamp screw to holdreflector assembly in place, see the second diagram. Finally, adjust the reflectorassembly in place and ensure that it is upright and facing away from the bike.Seatstay Mount Reflector Bracket AssemblyFirst insert one washer onto the hex bolt and insert hex bolt through the reflectorbracket and then through the seatstay bridge. Next, insert a second washer onto thebolt and thread a hex nut onto the bolt behind the seatstay bridge. Tighten bolts untilsnug, making sure the reflector is in an upright position. See diagram at the bottomright.22