HYPERTURN

737Options Technical data Product RangeBand filter with high-pressurecoolant pumpsA coolant pressure of 25/40/60 or 80 bar can be set as needed. This enablescoolant fed drilling and milling tools to be used to their best advantage.7Integrated measurement station for producingprecision parts with low manpower.Measurement device with measurementgauge and integrated part remover. Rejectedparts are separated from accepted parts.The band filter ensures the best possible filtering of the cooling lubricant, especiallywhen machining short-cutting materials. This extends maintenance intervals and reducesthe downtimes they cause.Bull´s eyeThe rotating window gives you thebest possible view of the machine'sworking area, so you can observethe cutting process even whencoolants are being used.7An ingenious principle. The rotating window ensures that wateris removed immediately.A permanent steady rest is only availablefor the HYPERTURN 690.On the HYPERTURN 665 and 690 thesteady rest is mounted on the lower turretlike a tool.The Hyperturn 665/690 turret restThere are different rest solutions for our two HYPERTURN modelsfor supporting long, slender workpieces.Unloading through counter spindleLong, slender workpieces can be removed from the machine through the counterspindle. Finished pieces can be rolled simply onto an inclined surface or storedin a lateral magazine using a discontinuous belt.Finished part conveyorThe finished-part pick-up device puts the parts on an accumulating conveyor.A discontinuous belt ensures that the often very complex parts do not fall ontoeach other.10 11