CEM6 - Critical Power Supplies

CEM6auto-start digital controllerALARMSCEC6.2CEA6Engine alarms:• High coolant temperature.• Low oil pressure.• Battery charge alternator• Start failure.• Low water level.• Fuel storage.• Overspeed.• Underspeed.• Low battery voltage.• High coolant temperature by sensor.• Low oil pressure by sensor.• Low fuel level by sensor.• Unexpected shutdown.• Stop failure.• Low engine temperature.• Genset voltage drops.• Emergency stop.Generator alarms:• Overload.• Genset voltaje asymmetry.• Maximum genset voltage.• Minimum genset voltage.• Maximum genset frequency.• Minnimum genset frequency.• Erroneus phase sequence of thegenset.• Inverse power.• Shortcircuit.exchancefor new configurations3 Programmable AlarmsThere are three programmable alarmsthat can be associated with enginealarms and be indicated by the LEDsAux1 and Aux2 of the display.When an alarm or warning is detected, the controllerproduces an acoustic signal, at the same time thedigital alarm output (AL) activates and the LED ofRESET button flashes. This status will remain thesame as long as the failure condition continues for aprogrammable period of time.ELECTRONIC publication 10_08