4. Stirring, Shaking, Mixing - Wenk Lab Tec

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingContentsMagnetic stirrers / hotplates 380without heating 380 + with heating 395 + Accessories 411Overhead stirrers 415Instruments 415 + Stirrers 419 + Magnetic stirrer heads 431Shakers and mixers 434Vortexer 434 + Orbital shakers 437 + Multidimensional shakers 447 + Microtitre plate shakers 466 + Incubator shakers 467www.wenk-labtec.com379

IKA ® -WERKE STAUFENEQUIPMENT FOR:LABORATORYANALYTIC& PROCESSwww.ika.comwww.wenk-labtec.com

GENERAL CATALOGUE EDITION 17IP Protection classesIP0123456Characteristic 1 for protection against contactNo special protectionProtection from solid objects greater than 50mm in diameterProtection from object greater than 12mm in diameterProtection from object greater than 2.5mm in diameterProtection from object greater than 1mm in diameterComplete protection against contact, Protection against dust depositComplete protection against contact, Protection from infiltration of dustIP01234567894. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingCharacteristic 2 for waterproofingNo waterproofingProtection from dripping waterProtection from vertically dripping water (tilted up to 15°)Protection from sprayed water (tilted up to 60°)Protection from splashed waterProtection from water projected from a nozzleProtection against heavy seas or powerful jets of water.Protection against immersionProtection against complete, continuous submersion in water.Protection against the ingress of water from all directions even under greatly high pressureon the housing. (High-pressure/steam cleaner, 80-100 bar)1Magnetic stirrer, non-electric, operated by water/air pressurePP-ABS construction. This unique stirrer is operated either by water pressure between1 and 2.5kg/cm² (15 to 40psi) or by air pressure. No electrical supply is needed, thuseliminating heat, electric shock and explosion hazards. Corrosion-proof, all-plastic construction.Can be used on the bench or clamped to a stand with a 12mm (½") diameter rod using the integral bosshead.Kartell1Dia. Height PK Cat. No.mmmm129 61 1 9.303 0432Magnetic stirrer HI180Without heating. Economical and lightweight stirrer.- Housing material : ABS plastic- Available in different coloursSpeedsafe system ensures that maximum speed will never be exceeded.Hanna2SpecificationsMax. stirring capacity (H2O):Speed:Power supply:Dimensions (dia. x H)Weight:1000ml100 to 1000rpm220V127 x 51mm650gType Colour PK Cat. No.HI 180A-2HI 180B-2HI 180C-2HI 180D-2HI 180E-2HI 180F-2HI 180G-2HI 180H-2HI 180I-2light yellowlight greenlight blueyellowgreendark blueredgreyivory1111111119.720 0909.720 0919.720 0929.720 0939.720 0949.720 0959.720 0969.720 0979.720 0983Magnetic stirrer HI190Compact and lightweight stirrer.- speed is regulated by simply turning a button- ABS plastic covered top plateHanna3SpecificationsMax. stirring capacity ( H2O):Speed:Dimensions (WxDxH):1000ml100 to 1000rpm120 x 120 x 45mmType PK Cat. No.HI 190M-2 1 9.720 085E & OE.www.wenk-labtec.com381

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingGENERAL CATALOGUE EDITION 1711Magnetic mini-stirrers topolino Ikamag ®Without heating. Extremely convenient magnetic mini-stirrer for mixing volumes up to 250ml.- Durable, brushless motor- Infinitely variable speed range- Strong magnetic couplingIKASpecificationsStirring quantity (H2O):Motor rating input/output:Speed range:Weight:Protection class acc. to DIN EN 60529:Tested to DIN EN IEC 61010-1.250ml1.1/0.8W300 to 1800rpm300gIP21Type Dimensions PK Cat. No.mmtopolino 95 x 115 x 40 1 9.720 220Optional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RSE Stirring bar retriever22Magnetic stirrers, lab discWithout heating. Lab disc is an innovative, very flat, magnetic stirrer. Its modern,IKAtoroidal coil technology with no moving parts guarantees a maintenance-free drive.Lab disc can automatically change it's rotational direction every 30 secs. and therefore enhances mixing of the medium.- High IP protection class (IP 65)- Set-up plate and casing made from chemically resistant materials- Slip-proof, safe standSpecificationsMax. volume stirred (H2O):800mlMotor rating input/output, W: 5/3Speed range:15 to 1500rpmMax. stirrer bar L x dia.:30 x 8mmUsable plate area dia.:90mmTop plate:PolyesterDimensions (WxDxH):114 x 161 x 12mmWeight:0.3kgHousing IP rating to DIN EN 60529:IP65Tested to DIN EN IEC 61010-1.Supply requirements:100-240V 50/60HzType Description Dimensions(W x D x H)mmlab disc IKAMAG ® EU/CH White117 x 180 x 12lab disc IKAMAG ® UKWhite117 x 180 x 12Optional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RSE Stirring bar retrieverPandim.mmØ 100Ø 100PK11Cat. No.9.720 4804.008 137Accessories please see page 412.382E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heating1Magnetic stirrer color squid Ikamag ®Without heating. Enhanced, small magnetic stirrers now with digital speed display (LED).- electronically controlled motor for more capacity- higher range of speeds from 0 to 2500rpm- max. stirring quantity 1L- excellent chemical resistance due to glass top and plastic base in TPE- manufactured in recyclable materialsIKA1SpecificationsMagnetic driveStirring volume (H2O):1LMotor rating input/output: 3/2WSpeed display:digital (LED)Speed range:0 to 2500rpmMax. magnetic bar (L x dia.):30 x 8mmTop plateMaterial:glassDimensions:115mm diameterGeneral dataDimensions (WxDxH):145 x 160 x 45mmWeight:0.55kgPermissible ambient temperature: 5 to 40°CPermissible relative humidity: 80%Protection class acc. to DIN EN 60529:IP54Supply requirements:100 - 240V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.color squid IKAMAG ® EU/CHcolor squid IKAMAG ® UKOptional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RSE Stirring bar retriever119.720 3654.008 1212Magnetic stirrer big squid Ikamag ®Without heating. Enhanced, small magnetic stirrers now with digital speed display (LED).- electronically controlled motor for more capacity- higher speed range from 0 to 2500rpm- excellent chemical resistance due to glass top and plastic base in PA- manufactured in recyclable materialsIKA2SpecificationsMagnetic driveStirring volume (H2O): 1.5LMotor rating input/output: 3/2WSpeed display:digital (LED)Speed range:0 to 2500rpmMax. magnetic bar (L x dia.):30 x 8mmTop plateMaterial:glassDimensions:160mm diameterGeneral dataDimensions (WxDxH):180 x 135 x 40mmWeight:0.7kgAmbient operating temperature: 5 to 40°CAmbient operating humidity:80% R.H.Protection class acc. to DIN EN 60529:IP54Supply requirements:100-240V 50/60 HzTested to DIN EN IEC 61010-1.Type PK Cat. No.big squid IKAMAG ® EU/CHbig squid IKAMAG ® UKOptional accessories: Ikaflon ® - Stirring bars, Trika ® - Stirring bars, RSE Stirring bar retriever119.720 4704.008 122E & OE.www.wenk-labtec.com383

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingGENERAL CATALOGUE EDITION 1711Magnetic stirrer Ikamag ® Mini MR standardWithout heating.- For stirring quantities up to 1L (H2O).- Infinitely variable speed from 0 to 2500rpm- White top plate suitable for observing colour reactionsSpecificationsMax. stirring volume, (H2O):1LMotor rating, input/output: 3/2WSpeed range:0 to 2500rpmTop plate:115 x 115mm Polyester filmSize (WxDxH):114 x 127 x 37mmWeight:0.25kgProtection to DIN EN 60529:IP42Supply requirements:100-240V 50/60 Hz.Tested to DIN EN IEC 61010-1.IKAType PK Cat. No.Mini MR standard IKAMAG ® EU/CHMini MR standard IKAMAG ® UKOptional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RSE Stirring bar retriever119.720 2116.202 53622 3Magnetic stirrer SM27For use in the field or inside incubators or gloveboxes where external power supply is impractical.StuartWith BioCote, silver-based, antimicrobial protection. Maximum speed 1300 rpm.Maximum volume stirred 1.5L (H2O). Top plate 150 x 160mm.Variable speed control with battery status indicator.ABS casing 70mm high. Maximum operating conditions +60°C and 80% R.H. Weight 1.3kg.Supplied with 4 x 1.5V size 'D' alkaline batteries giving up to 600 hours operation, and a 25mm PTFE coated follower.Accessory adapters are available for use on 230V 50Hz mains or 12V vehicle supply using the cigar lighter socket.Type PK Cat. No.SM27 1 9.950 4083Accessories for magnetic stirrer, SM27StuartDescription PK Cat. No.Mains adapter, SM27/1 for UK / Ireland,230 V 50Hz single phase suppliesMains adapter, SM27/1 for continental Europe,230 V 50Hz single phase suppliesVehicle battery adapter, SM27/ 2with cigarette lighter plug1119.950 4099.950 4109.950 41144Magnetic stirrer MIX 1 eco with internal controlWithout heating. With non-mechanical, electronic induction drive. For routine work.SoftStart. Constant rotation speed even if the viscosity of the stirring medium changes.3 years warranty. Made in Germany.SpecificationsOperating conditions:-10 to +50°C at 80% R.H. max.Housing:Stainless steelProtection category: IP 642magTypeRotationspeedStirringcapacityDimensions(W x D x H)Rating Weight PK Cat. No.rpm ml mm W kgMIX 1 eco 100 - 1400 1 - 3000 120 x 120 x 35 10 1.7 1 9.645 955384E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heating1Magnetic stirrer MIX 1 with internal controlWithout heating. With non-mechanical, electronic induction drive, dust and watertight ineasy-to-clean stainless steel housing. Constant speed irrespective of load even if viscositychanges. SoftStart. With large footprint and a strong and more penetrating magnetic field.4 step control. Not suitable for use in incubators. With mains adapter.3 years warranty. Made in Germany.SpecificationsOperating conditions:-10 to +50°C at 80% R.H. max.Casing:Stainless steelProtection category: IP 642mag1TypeRotationspeedStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.rpm ml mm W kgMIX 1 100 - 2000 1 - 10000 188 x 230 x 38 20 (4-steps) 4.0 1 9.645 9542Magnetic stirrer MIX 1 XL with internal controlUltra-flat, powerful magnetic stirrer for volumes from 100ml up to 40 litres, with long-range,2magmagnetic field for stirring over long distances up to max. 40mm, ideal for heavy-walled, glass vessels,round bottom flasks or double-walled containers, wash- and abrasion-resistant, stainless steel housing, speed range100 to 2000rpm with feedback control, quick stop within 2 sec., 4-step stirring power adjustment (5/10/15/20 Watt),digital speed display, 4-step soft start, mixing period intervals up to 240 sec. mixWatch (monitors stirring bar).3 years warranty. Made in Germany.2SpecificationsAmbient operating temperature: -10 to +50°C and max. 80% R.H. max.Case:Stainless steelProtection category: IP 64TypeRotationspeedStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.rpm ml mm W kgMIX 1 XL 60 - 2000 500 - 40000 225 x 280 x 35 20 (4-steps) 4.0 1 6.236 1093Magnetic stirrer maxMIX with internal controlWithout heating. For universal stirring applications in science and industry. Suitable for2maguse with heavy-walled reservoir bases, round bottom flasks and jacketed reactionvessels. Can also stir over larger distances (max. 60mm). With long range, extremely powerful magnetic field, whichproduces dual torque when starting up. Offers optimal operation safety by consistent speed regulation and 3 secondquick-stop without motor overrun. Adjuastable SoftStart, digital speed display. Can be cleaned under running water.Supplied with mains adapter for 230V 50/60 Hz. 3 years warranty. Made in Germany.3SpecificationsSpeed accuracy: ±0.25%Digital display:Adjustable SoftStart (10 to 60 sec.)Operating conditions:-10 to +50°C at 80% R.H. max.Housing:Stainless steelProtection category: IP 64TypeRotationspeedStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.rpm ml mm W kgmaxMIX 100 to 1200 1 to 150000 265 x 320 x 68 40 9.3 1 9.645 9754Magnetic stirrer accuMIX with internal controlMobile magnetic stirrer, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive conceptfor mixing of solutions, speed range from 120rpm up to 1600rpm, jerk-free stirring also at low speeds,two-step power setting for high power with regard to large and viscous stirring amounts and reduced power forbattery-saving long-term operation. Constructed for the independent battery- and stationary mains operation,equipped with 8 commercially available high performance rechargeable batteries (Mignon/AA), universalcharging/power supply device, intelligent battery charging station with single controlled charging slots as well asbattery service function and 12V adapter cable for the operation at cigarette lighter car sockets.NEW!2mag4SpecificationsOperating conditions:-10°C to +50°C at 80% R.H. max.Casing:Stainless steelProtection category: IP 30TypeRotationspeedStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.rpm l mm W kgaccuMIX 100 - 1600 1 - 3000 215 x 130 x 40 2/10 (2-steps) 2.5 1 9.646 011E & OE.www.wenk-labtec.com385

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingGENERAL CATALOGUE EDITION 1711Magnetic stirrer for cell cultures with internal control bioMIX 1NEW!Maintenance-free, 2mag stepper-motor drive for extremely slow and 100% jerk-free,gentle mixing of cell cultures, with extended speed range from 5rpm up to 250rpm,even and smooth stirring at slow speeds, power setting (10-steps) for high power when stirring largeand viscous media volumes and reduced power for non-warming, continuous operation.Digital display for speed and power setting, SoftStart for reliable and safe acceleration of the stirring bar,QuickSet for rapid setting of start and maximum speed, memory of last working status when switched off,suitable for culture flasks with spinning propeller or spinning ball systems.Please note - we recommend, due to reduced heat emission, the specially developed series bioMIXdrivefor use in incubators.2magSpecificationsPerm. operating temperature:Housing:Protection class:-10 to +50°C at 80% R.H. max.-40°C to 50°C, 10 to 95%, 500 to 1060hPaStainless steelIP64TypeRotationspeedStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.rpm ml mm W kgbioMIX 1 5 - 250 5 - 5000 180 x 230 x 38 6 (10-steps) 4.0 1 9.646 001Baffled flasks - please see page 13.22Magnetic stirrer with internal control MIX 4 MSNEW!Powerful 4-position stirring, 100% maintenance-free and wear-free, 2mag magnetic2maginduction drive concept, with individual and independent speed setting for each stirringposition (Master-Slave-Technology), also On-/Off function, synchronous speed mode for all positions, extremely widespeed range of 100rpm to 2000rpm, jerk-free stirring even at low speeds. Clear digital display for settings of stirrerspeeds, SoftStart procedure for reliable stirrer bar coupling/centring and safe acceleration, automatic memory functionto save the last settings, outstanding long working life of the hermetically sealed drive system and resistant stainlesssteel housing for easy and fast cleaning.SpecificationsHousing:Stainless steelProtection class: IP 64TypeRotationspeedStirringpositionsStirringcapacityDimensions(W x D x H)Rating Weight PK Cat. No.rpm ml mm W kgMIX 4 MS 100 to 2000 4 1 to 3000 245 x 425 x 38 28 8.9 1 9.646 01033Multi-position magnetic stirrers MIX 6/15 with internal controlWithout heating. With non-mechanical, electronic induction drive. Ideal for batch series2magstirring. Choice of 6-place, stirring position models which can stir up to 6 x 1L.Erlenmeyer flasks or 15-place models for up to 15 x 250ml beakers. Digital stirring speed display and soft-startfunction. With 4 adjustable power level stirring speeds (5 to 20W), easy to clean, hermetically sealed casing which canbe washed under running water, ultra flat, space-saving profile and 100% synchronous speed control in all stirringpositions. SoftStart. 3 years warranty, Made in Germay.SpecificationsOperating conditions:-10 to +50°C at 80% R.H. max.Housing:Stainless steelProtection category: IP 64TypeRotationspeedStirringpositionsStirringcentredistancesStirringcapacityDimensions(W x D x H)Weight PK Cat. No.MIX 6MIX 15386rpm mm ml mm kg100 to 2000 61301 to 3000245 x 425 x 388.8100 to 2000 15651 to 3000245 x 425 x 388.8E & OE.www.wenk-labtec.com119.645 9569.645 957

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heating1Multi-position magnetic stirrers MIX 15 eco with internal control1Without heating. Non-mechanical, electronic induction drive. With 15 stirring positions,2mage.g. for 6 x 1L erlenmeyer flasks or 15 x 250ml beakers. Suitable for mass screening andbiological applications, even in humidity incubators. With built-in controller, digital speed indicator and SoftStart drive.Supplied with mains adapter.3 years warranty. Made in Germany.SpecificationsOperating conditions:-10 to + 50°C at 80% R.H. max.Housing:Stainless steelProtection category: IP 64TypeRotationspeedStirringpositionsStirringcentredistancesStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.rpm mm ml mm W kgMIX 15 eco 120 - 1200 15 65 1 - 1500 245 x 425 x 38 10 8.8 1 9.645 9582Magnetic stirrer steriMIXdrive with external controlNEW!Pressure, steam, vacuum and temperature resistant.2magMaintenance-free 2mag-motor-drive with large speed range from 60rpm up to 1200rpm,fully encapsulated, pressure and vacuum resistant stainless steel housing, IP68, temperature resistant up to +150°C,extremely robust construction and performance, easy to clean and firm. 3 years warranty. Made in Germany.2SpecificationsOperating conditions:Casing:Protection category:-10 to +150°C at 100% R.H. max.Stainless steel, hermetically sealedIP 68/IP 20 (control)TypeRotationspeedStirringcapacityDimensions(W x D x H)Rating Weight PK Cat. No.steriMIXdrivesteriMIXcontrol** Control unit.rpm l mm W kg-1 - 40140 x 140 x 3220 9.060 - 1200 -200 x 175 x 4820 1.8119.646 0359.646 0363Magnetic stirring atexMIXdrive 1 with external controlNEW!Explosion protected.2mag1 stirring position, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Driveconcept for powerful mixing of solutions, jerk-free stirring even at low speeds.Fully encapsulated and hermetically sealed stainless steel housing, IP68, water, dust and germproof, extremely robustconstruction and performance. Easy to clean and maximum resistance, submersible in water, oil baths, suitable for theuse in CO2 incubators and ovens, temperate range up to +40°C. Certified according to ATEX II 2G Ex mb IIC T4.3SpecificationsOperating conditions:-10°C to +40°C at 100% R.H. max.+40°C immersed in waterCasing:Stainless steelProtection category: IP 68TypeStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.l mm W kgatexMIXdrive 1atexMIXcontrol cleanroom*1 - 10000-180 x 180 x 38210 x 55 x 302020 (4 steps)3.53.6* Control unit explosion protection zone 2.116.238 0059.646 000E & OE.www.wenk-labtec.com387

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingGENERAL CATALOGUE EDITION 1711Magnetic stirrers MAXdrive with external controlUnheated. With extremely strong, magnetically coupled power for stirring very large2magvolumes in heavy-walled vessels and over larger distances (max. 60mm).Can be controlled remotely via a separate remote controller with digital speed indicator.Continuous or timed operation is selectable. Fast stop in 2 secs without motor overrun. Running time can be preselectedin accordance with the viscosity. Overload protected and housed in an easy to clean, hermetically sealed casingwhich can be washed under running water. Adjustable soft-start (10 to 60 sec.) based on viscosity of the sample.3 years warranty. Made in Germany.SpecificationsSpeed accurancy: ±0.25%Operating conditions:-10 to +50°C at 95% R.H. max.Case:Stainless steelPortection according to DIN EN 60529:IP 65/20 (control)TypeRotationspeedStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.rpm l mm W kgMAXdriveMAXcontrol*-100 - 12001 - 250-260 x 260 x 68200 x 175 x 4840409.01.8* Control unit.Please order control unit separately119.645 9769.645 97722Magnetic stirrer FABdrive with external controlMaintenance-free 2mag-motor-drive with large speed range from 80rpm up to 990rpm.Fully encapsulated and tight stainless steel housing, IP65, extremely robust constructionand performance, easy to clean under running water. Individual measurements on request.3 years warranty. Made in Germany.SpecificationsOperating conditions:-10 to +50°C at 95% R.H. max.Casing:Stainless steelProtection category: IP 65NEW!2magTypeRotationspeedStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.FABdriveFABcontrol** Control unitrpm l mm W kg-1 - 1000180 x 180 x 75100 9.080 - 990 -200 x 175 x 48100 2.0119.645 9909.645 991Accessories for magnetic stirring systemsNEW!2magDescription PK Cat. No.Extension cable for MIXdrive, 3mExtension cable for bioMIXdrive, 3mExtension cable for MAXdrive/FABdrive, 3mConnection cable 12 V car battery for MIX 1 ecoMobile stand mixCADDY for MAXdrive/FABdrive111119.646 0419.646 0429.646 0439.646 0449.646 045We can supply thismanufactorer’swholeproduct range !388E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 17Multi-position magnetic stirrers MIXdrive with external control4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingNEW!Without heating. With non-mechanical, electronic induction drive and dust/watertight housing. Ideal for batch series stirring andfor use in water baths. Choice of 6-place stirring position models which can stir up to 6 x 1L erlenmeyer flasks, 15-place modelsfor up to 15 x 250ml beakers and 60-place models for small sample containers and, using appropriate test tube stands,up to 60 test tubes or centrifuge tubes. Available as eco 10W, high-power 20W or ultra high-power 40W version.Preselectable mixing power. SoftStart. With external control unit.3 years warranty. Made in Germany.2magSprecificationsOperating conditions:-10°C to +50°C at 100% R.H. max.Operating temp. rangeStandard:in air and water +50°CHT-Version:in air (ovens) +200°C, in water +95°CStirrer unit housing:Stainless steelProtection category: IP 68TypeStirringpositionsStirringcentredistancesStirringcapacityDimensions(W x D x H)Weight PK Cat. No.MIXdrive 1MIXdrive 1 HT (+200°C)MIXdrive 1 ecoMIXdrive 1 eco HT (+200°C)MIXdrive 1 XSMIXdrive 1 XS HT (+200°C)cuvetteMIXdrive 1MIXdrive 6MIXdrive 6 HT (+200°C)MIXdrive 15MIXdrive 15 HT (+200°C)MIXdrive 60MIXdrive 60 HT (+200°C)11111116615156060Please order control unit MIXcontrol separately.mm ml mm kg1 to 10000180 x 180 x 383.31 to 10000180 x 180 x 383.31 to 3000120 x 120 x 351.51 to 3000120 x 120 x 351.51 to 100048 x 48 x 180.31 to 100048 x 48 x 180.31 to 2512.5 x 12.5 x 60.11301 to 3000245 x 375 x 388.91301 to 3000245 x 375 x 388.9651 to 3000245 x 375 x 389.5651 to 3000245 x 375 x 389.532,51 to 500245 x 375 x 389.532,51 to 500245 x 375 x 389.511111111111119.645 9599.645 9609.645 9619.645 9629.645 9859.645 9869.645 9879.645 9639.645 9649.645 9659.645 9669.645 9679.645 968142312349.645 9599.645 9639.645 9659.645 987Control units for mixers MIXdriveTypeMIXcontrol ecoMIXcontrol 20MIXcontrol 402magRotation DimensionsRating Weight PK Cat. No.speed(W x D x H)rpm mm W kg120 to 1200100 to 160065 x 50 x 45200 x 155 x 3810200.51.4119.645 9699.645 9705100 to 2000 200 x 155 x 3840 1.41 9.645 971 6569.645 9699.645 971E & OE.www.wenk-labtec.com389

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingGENERAL CATALOGUE EDITION 1711 2Accessories for mixer MIXdrive2magDescription PK Cat. No.distriBOX 4 (4-way header)distriBOX 8 (8-way header)mixBATH (stainless steel bath, electropolished), fits for MIXdrive 6/15/60 (also HT)1119.645 9729.645 9739.645 974233 4Magnetic stirrer CB161Speed range 100 to 1500rpm. Maximum volume stirred is 15L.Glass ceramic top plate 160 x 160mm. Overall 190 x 300 x 100mm (WxDxH).Electronic variable speed control with off position.With BioCote silver based antimicrobial protection.StuartType PK Cat. No.CB161 1 9.950 41345Magnetic stirrers C-MAG MS 4/C-MAG MS 7/C-MAG MS 10 Ikamag ®Without heating. With glass ceramic top plate which offers excellent chemical resistance.- powerful motor for stirring quantities of up to 5l, 10l, or 15l (H2O)- raised control panel for protection against leaking liquidsIKA673909.720 4939.720 4949.720 495SpecificationsMagnetic stirrerStirring volume (H2O)C-MAG MS 4:5lC-MAG MS 7:10lC-MAG MS 10:15lMotor rating input/output:15/1.5WSpeed range:100 to 1500rpmSpeed display:scaleMax. magnetic bar (L x dia.)C-MAG MS 4:30 x 8mmC-MAG MS 7/MS 10:80 x 10mmSet-up plateMaterial:glass ceramicDimensions (WxDxH)C-MAG MS 4:100 x 100mmC-MAG MS 7:180 x 180mmC-MAG MS 10:260 x 260mmProtection class acc. to DIN EN 60529: IP 21Tested to DIN EN IEC 61010-1.TypeDimensionsWeight PK Cat. No.(W x D x H)mmkgC-MAG MS 4C-MAG MS 7C-MAG MS 10150 x 260 x 105220 x 330 x 105300 x 415 x 1053561119.720 4939.720 4949.720 495Optional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RSE Stirring bar retrieverE & OE.www.wenk-labtec.com567

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heating1Magnetic stirrer, KMO2 basic, Ikamag ®Without heating. Small but very powerful magnetic stirrer.- strong magnetic field resists stirrer bar decoupling- opto-electronic speed control motor- adjustable speed up to 1100rpm- stainless steel housing for easy cleaning and sterilization- with M10 thread for support rod H 16 VIKA1SpecificationsMax. volume stirred (H2O):5LMotor rating input/output: 14/4WSpeed range (rpm):0 to 1100rpmSpeed indication:ScaleSurface: 140 x 120mm, stainless steel (AISI 304)Dimensions (WxDxH):140 x 200 x 75mmWeight:1.4kgHousing IP rating to DIN EN 60529:IP21Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.KMO 2 basic IKAMAG ®KMO 2 basic IKAMAG ® UKOptional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RS 1 Stirring bar set, RSE Stirring bar retriever, support rod H 16V119.720 2104.007 9822Magnetic stirrers, Ikamag ® Midi MR 1 digitalWithout heating.- high power- flat stable stainless steel housing- non-locking motor- adjustable speed- LED digital speed display- 0 to 56 minute timer, or continuous operationIKA2SpecificationsMotor rating input/output: 70/19WMax. volume stirred (H2O):50LSpeed range:0 to 1000rpmTop plate: 350 x 350mm, Stainless steel (AISI 304)Dimensions WxDxH:360 x 430 x 110mmWeight:10.7kgProtection system to DIN EN 60529:IP21Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.Midi MR 1 digital Ikamag ® 1 9.720 306Optional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RSE Stirring bar retrieverAccessories please see page 412.E & OE.www.wenk-labtec.com391

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingGENERAL CATALOGUE EDITION 171239.720 1389.720 137Magnetic stirrers without heatingHei-Mix D/Hei-Mix L - For gentle stirring in biology and microbiologyHeidolphapplications- Top plate is insulated from the motor and protects your heat sensitive samples from any thermal damage- To treat your sample gently and protect it from damage the rotation speed ramps up slowly until it has reached thepre-programmed speed- Top plate diameter of 145mm and a speed range from 100rpm to 1400rpm is ideal for quantities up to 20l- Hermetically sealed housing prevents corrosion and increases the service life of your unit- You can even work with dry ice, a robust thermal insulation prevents corrosion inside the housing thus minimisingany dripping of condensate on the electronic components- These models come with a top plate material of finest quality stainless steelHei-Mix S- Stirs quickly and efficiently with an extended speed range up to 2200rpm- Long lasting polyamide housing and PVDF top plate material- Ideal for titrations due to white colored top plate- Space saving unit for efficiently-mixing sample sizes up to 5l. Small footprint of 126 x 80 x 140mm (W x H x D) only,and the top plate comes with a diameter of 104mm6.201 570TypeRotationspeedStirringcapacityPlatematerialDimensions(W x D x H)ProtectionlevelPKCat. No.Hei-Mix DHei-Mix D UKHei-Mix LHei-Mix L UKHei-Mix S UK4rpm ml mm1400 20000V2A173 x 277 x 941400 20000V2A173 x 277 x 941400 20000V2A173 x 277 x 941400 20000V2A173 x 277 x 942200 5000PVDF126 x 140 x 803232323232Multi-position magnetic stirrers, Ikamag ® RO 5/10/15 Power series111119.720 1389.720 1339.720 1379.720 1356.201 570Without heating. For 5, 10, or 15 stirring positions.IKAFor max. 400ml (H2O) stirring volume per stirring position. Speed range 0 to 1100rpm.Super flat, new design. With profiled, stainless steel surface to protect against liquid penetration and for easy cleaning.Incl. non-slip mat (PUR). Multiple, 1 x 5, 2 x 5, or 3 x 5-stirring position platform arrays enable optimum use of benchspace. Distance between stirring position centres: 90mm. Supply requirements: 230V 50 Hz.Accessory thermostatic bath fittings are available on request.12359.720 205SpecificationsMotor rating Input/Output, W: RO 5: 7.2/1.8RO 10: 14.4/3.6RO 15: 21.6/5.4Speed setting: Scaled dial (1 - 10)Protection class acc. DIN EN 60529:IP42Supply requirement:230V 50/60HzTested to DIN EN IEC 61010-1.TypeDimensions(W x D x H)WeightStirringpositionsPKCat. No.69.720 206mmgRO 5RO 10RO 15122 x 552 x 65182 x 552 x 65272 x 552 x 6523003200470051015Optional accessories: Ikaflon ® - Stirring bars, Trika ® - Stirring bars, RSE Stirring bar retriever1119.720 2059.720 2069.720 2074569.720 207392E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heating1Magnetic stirrer, Variomag Mono DirectWith non-mechanical, electronic induction drive. For routine work.Constant rotation speed even if the viscosity of the stirring medium changes.With separate power supply 230V - 50/60Hz.SpecificationsOperating conditions:-10 to +40°C at 95% R.H. max.Housing:Stainless steelColour:GreyThermo ScientificTypeRotationspeedStirringcapacityDimensions(W x D x H)Power PK Cat. No.rpm ml mm WMono Direct 130 - 1200 1 - 3000 180 x 215 x 35 1-5 1 9.720 5011Single magnetic stirrer systems, Variomag Mini, Micro, Compact und MaxiVariomag Mini for stirring very small volumes in cuvets or special autoanalyzer vials.Very suitable for integration in measuring systems, e.g. photospectrometers.Operating conditions: -10 to +56°C at 95% RH.Thermo ScientificVariomag Micro with thread on housing base for attaching to analytical instruments or mounting on a stand.Operating conditions: -10 to +120°C at 95% RH or 0 to +95°C immersed in water.Variomag Compact for routine use, ideal in water baths.Operating conditions: -10 to +120°C at 56% in air, 0 to +50°C immersed in water.Variomag Maxi with larger plate and a stronger and further-reaching magnetic field.For larger stirring volumes and media which are difficult to mix, e.g. samples which tend to form sediments.Operating conditions: -10 to +120°C at 56% in air, 0 to +50°C immersed in water.Available with three different controllers.TypeMini with TelemodulMini with Telemodul 20 CMicro TelemodulMicro Telemodul 20 CCompact with TelemodulCompact with Telemodul 20 CMaxi TelemodulMaxi Telemodul 20 CMaxi Telemodul 40 CRotationspeedPower Dimensions(W x D x H)rpm W mm130 - 10000.1 12 x 12 x 5130 - 1400 0.5/0.1/0.15/0.2 12 x 12 x 5130 - 10003 48 x 48 x 15130 - 14002/4/6/8 48 x 48 x 15130 - 10005 120 x 120 x 35130 - 14003/6/9/12 120 x 120 x 35130 - 10006 180 x 180 x 35130 - 14004.5/9/13.5/18 180 x 180 x 35100 - 20003/36 180 x 180 x 35PK111111111Cat. No.9.720 5399.720 5419.720 5409.720 5429.720 5459.720 5479.720 5489.720 6369.720 6372342349.720 5399.720 5409.720 545E & OE.www.wenk-labtec.com393

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heatingGENERAL CATALOGUE EDITION 1711Large Volume Stirrers Variomag Mobil 10 and Mobil 25NEW!Variomag Mobil 10 and Mobil 25 Large Volume Stirrers have the power to stir and mixThermo Scientificvolumes up to 10L and they are ideal for hard-to-stir viscous liquids.- Compact space-saving design- Gradual low-shear acceleration on start-up- Quick Stop function stops the drive within three seconds, minimising after runs and reducing the risk of breakage- Easy to clean- Variomag Mobil 25 can be used in autoclaves, water baths and climatic chambers (can be used at temperatures up to121°C and high pressure up to 2 bars)- Requires external Telemodul 10 M controller (needs to be ordered separately)SpecificationsOperating conditions:Mobil 10:Mobil 25:-10 to +56°C at 95% R.H.-10 to +121°C at 95% R.H.TypeRotationspeedStirringcapacityChamberdimensions(Dia. x H)Power Weight PK Cat. No.Mobil 10Mobil 25Telemodul 10 M** Controller, 230V.2mmrpm ml W kg-100 - 10000128 x 3210 0.7-100 - 10000128 x 3210 1.7100 - 1000 ---2Magnetic stirrer, Variomag Maxi Direct1114.010 0224.010 0234.010 027With non-mechanical, electronic induction drive and dust/watertight,Thermo Scientificeasy-clean stainless steel housing. Constant speed irrespective of load even if viscosity changes.With large footprint and a strong and more penetrating magnetic field. Not suitable for use in incubators.With mains adapter.SpecificationsStirrer: 1Speed range:80rpm to 2000rpmOperating conditions:-10 to +40°C at 95% R.H. max.Casing:Stainless steelTypeStirringcapacityPowerDimensions(W x D x H)PKCat. No.ml W mmMaxi Direct 100 - 5000 5 - 20 180 x 215 x 35 1 9.720 61833Multi-position magnetic stirrers, Variomag Poly 15With non-mechanical, electronic induction drive. With 15 stirring spaces, for e.g. 6 x 1Lerlenmeyer flasks or 15 x 250ml beakers. For mass screening and biological applications,even in humidity incubators. With built-in controller, digital speed indicator and soft-start drive.With mains adaptor.SpecificationsStirring positions: 15Operating conditions:-10 to +40°C at 95% R.H. max.Housing:stainless steel, powder coatedColour:greyThermo ScientificType Rotation DimensionsPower PK Cat. No.speed (W x D x H)rpm mm WPoly 15 130 - 990 240 x 420 x 35 10 1 9.720 65043944Magnetic stirrer, Variomag Power DirectSuper flat, powerful magnetic stirrer for volumes from 100ml up to 40L, with long-range,Thermo Scientificmagnetic field for stirring over long distances up to max. 40mm, ideal for thick-walled,glass vessels, round bottom flasks or double-walled containers, wash- and abrasion-resistant, stainless steel housing,speed range 100rpm to 2000rpm with feedback control, quick stop within 2 sec., 4-step stirring power adjustment(5W/10W/15W/20W), digital speed display, bi-directional RS232 interface allowing up to 14 units to be directly andindividually controlled by the user's PC and 24V d.c. output, a.c. adapter for 100 - 240V. Ambient operatingtemperature: -10 to +40°C.TypeRotation DimensionsPower Weight PK Cat. No.speed (W x D x H)rpm mm W kgPower Direct 100 - 2000 240 x 295 x 35 5/10/15/20 2.5 1 9.720 595E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/without heating- hotplates/with heating1Multi-position magnetic stirrers, MultipointWith non-mechanical, electronic induction drive. Ideal for batch series stirring.Thermo ScientificChoice of 6-place, stirring position models which can stir up to 6 x 1liter erlenmeyer flasks or15-place models for up to 15 x 250ml beakers. With digital stirring speed display and soft-start function.With 4 adjustable power level stirring speeds (5 to 20W), easy to clean, hermetically sealed casing which can bewashed under running water, ultra flat, space-saving profile and 100% synchronous speed control in all stirringpositions. Supplied with mains adapter for 230 V 50/60 Hz.Operating conditions: -10 to +40°C at 95% R.H. max.Housing: Stainless steel1TypeStirringpositionsStirringcentredistancesStirringcapacityRotationspeedDimensions(W x D x H)PKCat. No.Multipoint 6Multipoint 15615mm ml rpm mm1301 - 300080 - 2000 240 x 420 x 35651 - 300080 - 2000 240 x 420 x 35119.720 6249.720 6252LLG-RCT standard safety controlMagnetic stirrer with new technology and new functions:- integrated temperature control- incl. Pt1000 temperature sensor (PT 1000.60)- exact temperature and speed setting via digital display, even when switched off- digital display of set safety temperature limit- hot top indicator, hot surface warning to prevent burns- digital error code display- with adjustable safety circuit of heating plate temperature (+50 to +360°C)- safety magnetic stirrer with heating, suitable for unsupervised operation- DIN 12878 connector for attaching a contact thermometer, e.g. ETS-D5; enables precise temperature control directlyin the heated medium- enhanced safety due to improved heat control technology- enclosed assembly (IP42) guarantees long service life- highly polished, aluminum hotplate for optimal heat transfer- improved magnetic coupling- supplied with housing protection cover H 892SpecificationsDrive unitStirring quantity (H2O):20LMotor rating input/output: 16/9WSpeed display:digitalSpeed range:50 to 1500rpmMax. magnetic bar (L x dia.):80 x 10mmHeating functionSpeed display:digitalHeat output:600WHeating rate (1 litre H2O in H 15):6.5K/minTemperature range: RT to 310°CSetting accuracy: ±1KTemp. variation without temp. sensor: ±2KAdjustable safety circuit: 50 to 360°CDigital temperature limit display: 50 to 360°CControl accuracy with sensor:PT 1000/±1KETS-D5/±0.5KHeating plateMaterial:aluminium alloyDimensions:135mm dia.General dataDimensions (WxDxH):160 x 270 x 85mmWeight:2.5kgOperating temperature range: 5 to 40°COperating humidity range:80% R.H.Protection class acc. to DIN EN 60529:IP42Tested to DIN EN IEC 61010-1.Type PK Cat. No.RCT Standard safety control incl. Pt1000 1 9.720 250Optional accessories:Electronic contact thermometer ETS-D5, Ikaflon ® stirring bars, Trika ® stirring bars, RS 1 stirring bar set, RSE Stirring bar remover, Quarter System, Reactionblock SystemE & OE.www.wenk-labtec.com395

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingGENERAL CATALOGUE EDITION 1711Magnetic stirrer/hotplate RH basic 2 IKAMAG ®Low-priced, magnetic stirrer/hotplate, with heating, with stainless steel top plate.- fixed overtemperature safety cut-out at 400°C- soft-start motorSpecificationsStirring volume:10LMotor rating input/output: 15/2WSpeed indication: Scale (0 to 6)Speed range100 to 2000rpmHeating power:400WHeating rate (1 litre water):3K/minTemperature range:Amb. to +320°CHotplate surface:Stainless steel (AISI 304), 125mm dia.Dimensions WxDxH:168 x 220 x 105mmWeight:2.4kgProtection class acc. to DIN EN 60529:IP21Supply requirement:230V 50/60 HzTested to DIN EN IEC 61010-1.IKADescription PK Cat. No.RH basic 2 IKAMAG ® 1 9.720 402Optional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RSE Stirring bar retriever396E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingMagnetic stirrer C-MAG HS 4/C-MAG HS 7/C-MAG HS 10 Ikamag ®With heating. Ceramic hotplate which offers excellent chemical resistance.- powerful motor for stirring quantities of up to 5L, 10L or 15L (H2O)- fixed safety circuit of 550°C- Hot Top indicator - hot surface warning to prevent burns- exact temperature setting via digital display (LED)- digital error code display- elevated control panel for protection against spilled liquidsIKA1C-MAG HS 7 and C-MAG HS 10:Connection acc. to DIN 12878 for attaching a contact thermometer, e.g. ETS-D5; enables precise temperature control.SpecificationsMagnetic stirrerStirring quantity (H2O)C-MAG HS 4:5LC-MAG HS 7:10LC-MAG HS 10:15LMotor rating input/output:15/1.5WSpeed range:100 to 1500rpmProtection class according to DIN EN 60529:IP21Speed display:scaleMax. magnetic bar (L x dia.)C-MAG HS 4:30 x 8mmC-MAG HS 7/HS 10:80 x 10mmHeating functionTemperature display:digitalHeat outputC-MAG HS 4:250WC-MAG HS 7:1000WC-MAG HS 10:1500WHeating rate (1 l H2O)C-MAG HS 4:2.5K/minC-MAG HS 7/HS 10:5K/minHeating temperature range: 50 to 500°CHeat control accuracy: ±10KFixed safety circuit: 550°CControl accuracy with sensorC-MAG HS 4: -C-MAG HS 7/HS 10:ETS-D5/±0.5KTop plateMaterial:glass ceramicDimensionsC-MAG HS 4:100 x 100mmC-MAG HS 7:180 x 180mmC-MAG HS 10:260 x 260mm239.720 4909.720 4919.720 492TypeDimensionsWeight PK Cat. No.(W x D x H)mmkgC-MAG HS 4C-MAG HS 4 UKC-MAG HS 7C-MAG HS 7 UKC-MAG HS 10C-MAG HS 10 UK150 x 260 x 105150 x 260 x 105220 x 330 x 105220 x 330 x 105300 x 415 x 105300 x 415 x 1053355661111119.720 4904.008 0879.720 4914.008 0909.720 4924.008 093Optional accessories: Ikaflon ® - stirring bars, Trika ® - stirring bars, RS 1 Stirring bar set, RSE Stirring bar retriever, H 16 V Support rod, HS 7 and HS 10additionally: Electronical thermometer ETS-D54Magnetic stirrer C-MAG HS 7 PackageC-MAG HS 7 Package includes:Magnetic stirrer/hotplate C-MAG HS 7, ETS-D5 Electronic contact thermometer,H 38 Holding rod, H 16 V Support rod and H 44 Bosshead.Type PK Cat. No.123IKA4C-MAG HS 7 Package 1 6.235 183E & OE.www.wenk-labtec.com397

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingGENERAL CATALOGUE EDITION 1711 2Magnetic stirrer/hotplate, RCT basic safety control IKAMAG ®2With heating. The new improved version with novel technology for high performance:- safety magnetic stirrer with heating, suitable for unsupervised operation- integral temperature control- Pt1000 temperature sensor (PT1000.60) included- exact temperature and speed setting via digital display, even when switched off- set safety temperature limit displayed digitally- Hot Top indicator,hot surface warning to prevent burns- digital error code display- with adjustable safety circuit for hotplate temperature (50 to 360°C)- DIN 12878 connection for a contact thermometer, e.g. ETS-D5, enabling precise temperature control- enhanced safety thanks to improved heat control technology- enclosed housing (IP42) guarantees long service life- highly polished aluminium hotplate for optimum heat transfer- strong magnetic coupling- supplied with housing protection cover H100 and PT1000.60 temperature probeIKASpecificationsMagnetic stirrer:Stirring quantity max. per stirring position (H2O):20LMotor rating input/output, W: 16/9Speed display:digitalSpeed range:50 to 1500rpmHeating capacity:Heat output:600WHeating rate (1litre H2O in H15):6.5 K/minTemperature range: Amb. to 310°CControl accuracy:±1 KTemperature variance without sensor:±2 KAdjustable safety area: 50 to 360°CIndication of temperature restricting with digital indication: 50 to 360°CSensor in medium/ control accuracy:Pt1000/±1 KETS-D5/±0.5 K (Cat. No. 9.720 241)Usable plate area:Plate material:aluminium alloyDimensions:135 mm dia.General information:Dimensions (W x D xH):Weight:Protection class according to DIN EN 60529:Supply requirement:Tested to DIN EN IEC 61010-1.160 x 270 x 85mm2.5kgIP42230V 50/60 HzType PK Cat. No.RCT basic safety controlRCT basic safety control UK119.720 2406.230 573Optional accessories: Electronic contact thermometer ETS-D5, Ikaflon ® -Stirring bars, Trika ® -Stirring bars, RS 1 Set of stirring bars, RSE Stirring bar retriever,Protective hood H 100, PT 1000.60, Quarter SystemAccessories please see page 412.We can supply thismanufactorer’swholeproduct range !398E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heating1 2Magnetic stirrer/hotplates, RET basic C safety controlWith heating. The classic, now with a new design, functions and features.- wide speed range from 50rpm to 1700rpm- integral temperature control- Pt1000 temperature sensor (PT 1000.60) included- exact temperature and speed setting via digital display, even when switched off- set safety temperature limit displayed digitally- Hot Top indicator, hot surface warning to prevent burns!- digital error code display- adjustable hotplate temperature (50 to 360°C) safety circuit- safety magnetic stirrer with heating, suitable for unsupervised operation- DIN 12878 socket for connecting a contact thermometer, e.g. ETS-D5, enabling precise temperature control- excellent safety level thanks to improved heat control technology- enclosed assembly (IP42) guarantees long service life- very broad temperature range (Amb. to 340°C)- extremely fast heating times- electronic speed control- strong magnetic coupling- H100 protection cover supplied and PT1000.60 temperature probeIKA12SpecificationsMagnetic stirring:Volume stirred (water):20LMotor rating input/output: 16/9WSpeed adjustment:DialSpeed range:50 to 1700rpmMaximum magnetic stirrer bar (L x dia.):80 x 10mmHeatingHeat output:600WHeating rate (1 l H2O in H15):7 K/minTemperature range: Amb. to 340°CAccuracy: 1 ±KSpeed control:steplessAdjustable safety circuit: min 50°Cmax 360°CConnection for ext. temperature sensor: DIN 12 878Control accuracy with temp. probe:PT 1000/ ±1 KETS-D 5/ ±0.5 KHotplate material:Stainless steelDimensions:dia. 135mmDimensions (WxDxH):160 x 270 x 95mmWeight:2.5kgProtection system to DIN EN 60529: IP 42Tested to DIN EN IEC 61010-1.Supply requirements:230V 50/60HzType PK Cat. No.RET basic safety controlRET basic safety control UK119.720 2484.008 113Optional Accessories: Electronic contact thermometer: ETS-D5, IKAFLON ® - Stirring bars, TRIKA ® -Stirring bars, RS 1 Set of stirring bars, RSE Stirring barremover, Protection cover H 100, Temperatur sensors: PT 1000.60, PT 1000.70, Synthesis attachements: Reaction block system, Quarter System.E & OE.www.wenk-labtec.com399

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingGENERAL CATALOGUE EDITION 1711Magnetic stirrer/hotplates, RET control/t IKAMAG ® safety controlNEW!RET control/t IKAMAG ® safety control. New safety magnetic stirrer with heating,suitable for unsupervised operation.- Timer: min. 1 min/max. 9 h 59 min- Option: 1 sensor for medium temperature (PT 100) or 2 separate temperature sensors for heat transfer fluid andmedium (PT 1000) available (automatic identification)- 2 adjustable safety circuits- Stirring bar crack detection- Setting acc. medium temperature: 0.5 K- HOT warning display indicating any residual heat when unit is switched off- Easy-to-read backlit LCD display- Actual medium temperature resolution displayed: 0.5 K (RT to 100°C); 1 K (from 100°C upwards)- Fuzzy control and microprocessor technology guarantee maximum control accuracy- PC control via RS 232 interface, with optional safety function- Software labworldsoft ® is available to control and document all measured values via PC- 3 modes of operation, e.g. stirring and heating functions can be secured against inadvertent changes ofset parameters- Enclosed assembly (IP 42) guarantees long service life- Incl. protection cover H 99IKASpecificationsDrive unit:Stirring quantity (H2O):20LMotor rating input/output: 12/5WSpeed display:digitalSpeed range:0 to 1200rpmHeating function:Heat output:600 WHeating rate (1 litre H2O):7K/minTemperature range:Amb. +340°CSetting accuracy (up to 100°C/from 100°C):0.5/1KAdjustable safety circuit: 50 to 350°CControl accuracy with sensor: 0.2KHeating plateMaterial:stainless steelDimensions:135mm dia.General dataDimensions (WxDxH):160 x 280 x 97mmWeight:2.8 kgProtection class acc. to DIN EN 60529:IP42Supply requirements:230 V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.RET control/t IKAMAG ® safety control 1 6.237 544Optional accessories: Magnetic stirring bars: IKAFLON ® TRIKA ® 25, RS 1 Set of magnetic stirring bars, RSE Stirring bar remover,Temperature sensors: PT 100.50 , PT 100.51, labworldsoft ® , H 16 V Support rod, H 16.1 Extension, H 38 Holding rod, H 44 Boss head clamp,H 11 Mains cable optional with Euro plug, CH plug, UK plug or US plug, Quarter System, Reaction block SystemTemperature sensor for RET control/tType Description ImmersiondepthmmPT 100.50 AISI 316 Ti230PT 100.51 Borosilicate glass 3.3230PK11Cat. No.9.720 3509.720 351IKA23239.720 3509.720 351400E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heating1Electronic Contact thermometer ETS-D53 possible operation modes guarantee optimum adjustment to your application:IKAOperating mode A: Suitable for work with varying parameters (from -50°C to 450°C).Adjustable safety temperatureOperating mode B: Suitable for repeated operation under uniform conditions and parametersOperating mode C: Suitable for unsupervised operation- with optimised PID control- reset function- includes stainless steel sensor probe H 62.51- for all magnetic stirrers with a DIN 12878 class 2 contact thermometer connection, e.g. IKA ® , Heidolph and Corningwith adapter AD-C1.1SpecificationsTemperatureMeasuring range: -50 to 450°CResolution:±0.1ΚAccuracy*:±0.2KControl accuracy: 0.1KControl accuracy (with sensor)±0.5KVoltage:8 to 16V d.c.Current (at 9V)15 mAConnection: DIN 12878 Class 2Operating range: 0 to 60°CMax. R.H.: 80%Protection class:IP54Connector: 6-pole, DIN 45322Weight:0.2kgTested to DIN EN IEC 61010-1.Type DimensionsPK Cat. No.(W x D x H)mmETS-D5 82 x 22 x 83 1 9.720 241Dimensions without sensor.*Sensor: PT1000 DIN IEC 751 Class AAccessories for ETS D5 contact thermometerType Description PK Cat. No.NEW!IKAH 44H 16 VH 62.51H 66.51H 70H 11H 38BossheadStainless steel support rodReplacement sensor, stainless steelStainless steel sensor, glass sleevedExtension cable, 1 metreReplacement power cableHolding rod11111119.232 9949.720 2579.232 9989.232 9999.233 0009.720 2769.232 996234523459.232 9949.232 9989.232 9999.233 000E & OE.www.wenk-labtec.com401

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingGENERAL CATALOGUE EDITION 1711Synthesis attachments for RCT basic, RET basic and RET controlQuarter SystemThe carrier plate can be fitted with four identical, or differing, aluminium quarter segments,allowing up to 36 reaction vessels to be processed at the same time. The aluminium quarters guarantee optimalheat transfer throughout the process with no interference to the magnetic field.This ensures that all the containers are processed at the same temperature and the contents are uniformly mixed.The different colours used for the various quarters makes them easier to distinguish.- multiple syntheses with only one magnetic stirrer- uniform mixing in every vessel- high-precision thermal conduction directly into the quarters- same temperature in all vessels- wide range of applications thanks to interchangeable quarters- safe and clean workingIKAType Description PK Cat. No.H 135.3H 135.313H 135.314H 135.315H 135.310H 135.311H 135.312Base plateQuarter 4ml vialQuarter 8ml vialQuarter 16ml vialQuarter 20ml vialQuarter 30ml vialQuarter 40ml vial11111119.720 2699.720 2739.720 2749.720 2759.720 2709.720 2719.720 272Overall accessories for IKA magnetic stirrersType Description FormodelPKIKACat. No.PT 1000.60PT 1000.70H 99H 100labworldsoftTemperature sensorTemperature sensor,glass-coatedProtective coverProtective coverSoftware for control and data collectionRCT / RETbasic safety controlRCT basic safety control,RET basicRET seriesRCT basic, RET basicRET control-visc series111116.229 7026.231 2839.910 3226.226 7369.910 32022Synthesis attachments for RCT basic, RET basic and RET control/tReaction Block SystemIKAThe reaction block allows syntheses to be carried out in round flasks at temperatures of up to 180°C. This systemensures optimal heat transfer from the heating plate directly into the medium. Uniform mixing is also guaranteedbecause there is no interference to the magnetic field from the aluminium blocks. The PTFE coating prevents burningand ensures that working with the system is safe. Reaction blocks are available in three standard sizes.These can be adapted to various flask sizes using the appropriate inserts.- uniform mixing- high-precision thermal conduction directly into the reaction block- PTFE coating protects against burning- wide range of applications thanks to exchangeable inserts- safe and clean workingType Description PK Cat. No.H 135.4H 135.410H 135.411H 135.412H 135.5H 135.510H 135.511H 135.512H 135.6H 135.610Reaction block flasks 100mlFlask insert 10mlFlask insert 25mlFlask insert 50mlReaction block flasks 500mlFlask insert 200mlFlask insert 250mlFlask insert 300mlReaction block flasks 1000mlFlask insert 500ml11111111119.720 2779.720 2789.720 2799.720 2809.720 2819.720 2849.720 2859.720 2869.720 2949.720 295402E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingMagnetic stirrer/hotplates, multi-position, RT 5/10/15 power IKAMAG ®With heating. High performance, multi-position magnetic stirrer/hotplates with integraltemperature control. Precise temperature distribution on the heating plate makes itpossible to perform experiments up to a medium temperature of +70°C.Simultaneously operating stirrers.Absolute consistency over sample conditions for the individual samples.IKASpecificationsSpeed range:0 to 1100rpmDeviation for individual stirring positions: 5%Maximum hotplate temperature: 120°CMax. capacity per stirring position: 0.4LStirring point separation:90mmMotor rating input/output:RT5: 7.2/1.8WRT10: 14.4/3.6WRT15: 21.6/5.4WSpeed indication: Scale (1 to 10)Temperature range (surface): Amb. to 120°CMax. temperature medium (dep. on vessel): 70°CTemperature consistancy in the medium:±2 KProtection class (DIN EN 60529):IP42Supply requirement:230V 50/60HzTested to DIN EN IEC 61010-1.TypeDimensions(W x D x H)WeightStirringpositionsHeatingpowerPKCat. No.RT 5 powerRT 10 powerRT 15 powermm g W138 x 552 x 653000 5175198 x 552 x 654200 10375288 x 552 x 656000 15580Optional accessories: IKAFLON ® - Stirring bars, TRIKA ® stirring bars, RSE Stirring bar remover.1119.720 6009.720 6019.720 6021231239.720 6009.720 6019.720 602E & OE.www.wenk-labtec.com403

Safe Heatingand MixingThe extended heating capacity of 800 Wreduces heat-up times by 35 % comparedto other units at 600 WHermetically-sealed housingprotects all mechanical andelectronic components fromaggressive environmentsKera Disk ® top plate:The aluminum top plate allows for immediateheat transfer and for quick heat-up times.A thin layer of ceramic coating makes the topplate chemical-resistant and scratch proofIn case the heatingfunction fails, stirringwill not be discontinuedto prevent bumpingAn overtemperaturecircuit switches off the hotplate if an overtemperaturesituation occurs. The unit willpower off completely in case of ashort circuit, damage to the temperaturesensor or other incidences during operationEven if the stirrer is exposed to highest temperatures, damageto is categorically ruled out – all models come with a fire-resistantaluminum die-cast housingA separate on/off button for heatingprevents unintentional heat-up – thebutton is illuminated for visual controlThe average operational lifespan of 10 years isbacked by a 3-year warranty and makes yourpurchase a truly worthwhile investmentwww.heidolph.comwww.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingMagnetic stirring hotplates MR Hei-Standard/Hei-Tec/Hei-EndSafe Heating and MixingHeidolph- Variable speed is adjustable from 30rpm till 1400rpm at an accuracy of ±1% for gentle mixing- Safety circuits avoid an overheat situation of your hotplate. If the temperature overshoots,heating will be powered off immediately- The strong magnetic field allows for stirring of even higher viscosity media or stirringa volume of 20L of water with ease- The hotplate reaches a maximum temperature of 300°C with the 800W heating power in a significantly reduced timeMR Hei-Standard - Model for standard applications without display- For your protection, an independent safety circuit will switch off heating if hotplate temperature goes above 25°C ofset temperature- Upgrade this magnetic stirrer with the optional digital thermometer, EKT Hei-Con, that provides precise temperaturecontrol to give you temperature overshoot protection and reproducible results- Separate on/off switch for heating prevents an unintentional heat up. When heating is switched on, the on/off buttonis illuminated for visual control- Large analog knobs allow for convenient speed setting from 100rpm to 1400rpm at an accuracy of ±2% andtemperature setting up to 300°CMR Hei-Tec - Model for higher requirements and reproducible results- This units features a digital display and allows for easy setting and monitoring values on the illuminated read out- For your protection, an independent safety circuit will switch off heating of hotplate temperature goes above 25°C ofset temperature- Digital speed setting from 100rpm to 1400rpm at an accuracy of 2% and temperature setting up to 300°C- Upgrade this magnetic stirrer with the optional digital thermometer, EKT Hei-Con, that provides precise temperaturecontrol to give you temperature overshoot protection and reproducible results- Separate on/off switch for heating prevents an unintentional heat up. If heating is switched on, the on/off button isilluminated for visual controlMR Hei-End - Model for highest safety- Separate on/off switch for heating prevents an unintentional heat up. If heating is switched on, the on/off button inilluminated for visual control- An independent safety circuit switches off heating at an operator pre-programmed temperature value between10 to 25°C above your set temperature- Additional operational safety step is required to change parameters which prevents unwanted changes to the actualsetting- Digital display allows for easy setting and monitoring values on the illuminated read out. Speed setting from30rpm to 1400rpm at an accuracy of 1% and temperature setting up to 300°C- Hotplate residual heat indicator in the digital display illuminates when unit is turned off and hotplate temperature isabove 50°C to prevent accidental operator injury- To protect your sample from overheating, a safety circuit switches off heating if the temperature sensor is notimmersed in your media vessel1239.720 1569.720 1459.720 183SpecificationsSpeed, max.:1400rpmHeating power:800WHot plate temperature: 20 to 300°CMedium temperature, max.: 250°CTemperature accuracy:±1°CAccuracy temperature setting (with EKT Hei-Con)±1°C/±0.2°C (MR Hei-End)Stirring capacity, max. (H20):20 litresDimensions (WxDxH):173 x 277 x 94mmWeight:2.6kg/2.9kg (MR Hei-Standard)Protection class (DIN 60529):IP32Diameter Hotplate:145mmType PK Cat. No.MR Hei-StandardMR Hei-Standard UKMR Hei-TecMR Hei-Tec UKMR Hei-EndMR Hei-End with 2 Lemo-ConMR Hei-End UK11111119.720 1566.229 3589.720 1456.240 7669.720 1839.720 1849.720 131123E & OE.www.wenk-labtec.com405

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingGENERAL CATALOGUE EDITION 1711Contact thermometer EKT Hei-Con- For precise temperature control we recommend the optional EKT Hei-ConHeidolphwhich is suitable for the MR Hei-Standard and MR Hei-Tec models- Take advantage of the built-in Fuzzy-Logic controller that ensures a fast heat up while preventing over heating.- Works efficiently in a very hot environment or under steamy conditions- Double-spaced digital display for convenient monitoring of the illuminated read out- By pressing the MAX-button you can see the max. temperature at which the unit for safety reasons will power off- All heat settings of the hotplate will be indicated on the EKT Hei-Con display- To make troubleshooting easy, a sensor feature signals if any short-circuit or breakage occurs on the display,to inform operator of disruption- Equipment automatically switches off heating if the temperature sensor is not in contact with the mediaor if it is removed from the vessel unintentionallyAccessories:- Temperature sensors are available in two different options - stainless steel or glass coated sensor for improvedchemical resistance- Please order stay bar and temperature sensor holder separatelySpecificationsTemperature range:-50 to +300°CResolution: 1°CAccuracy of measurement:±1°CMeasuring cycle:1.5 secControl accuracy:±0.5°CTemperature sensor EKT Hei-Con:Pt 1000, V2ATemperature sensor EKT Hei-Con G:Pt 1000, glassSensor length:210mmCable length:700mmMin. immersion depth:20mmAmbient temperature range:-5 to +60°CHousing:PolyamidWeight:0.3kgDimension (L x W x H):54 x 22 x 126mmProtection (DIN EN 60529): IP 40Power supply:8 - 15VType Description PK Cat. No.EKT Hei-ConEKT Hei-Con Gstainless steel sensor (V2A)glass coated sensor119.720 1689.720 169Accessories for Contact Thermometer EKT Hei-ConHeidolphDescription PK Cat. No.Support rod for Contact ThermometerTemperature sensor holder119.730 0189.730 017406E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heating1 2Complete packages Magnetic stirrersSafe Heating and MixingPackage MR Hei-Standard- Magnetic Stirrer MR Hei-Standard- EKT Hei-Con with temperature sensor- Support Rod for EKT Hei-Con- Clamp for temperature sensorHeidolph1Packages Heat-OnPackage MR Hei-Tec Multi-Well- Magnetic Stirrer MR Hei-Tec- EKT Hei-Con with temperature sensor- Support Rod for EKT Hei-Con- Heat-On Multi-Well system including Multi-Well Holder and the following inserts: 2 x 25ml, 2 x 50ml, 2 x 100ml- 2 x Retort Clamp, 2 x Boss HeadPackage MR Hei-Standard Multi-Well- Magnetic Stirrer MR Hei-Standard- EKT Hei-Con with temperature sensor- Support Rod for EKT Hei-Con- Heat-On Multi-Well system including Multi-Well Holder and the following inserts: 2 x 25ml, 2 x 50ml, 2 x 100ml- 2 x Retort Clamp, 2 x Boss Head2Package StarFishPackage MR Hei-End Multi-Workstation- Magnetic Stirrer MR Hei-End- Temperature sensor Pt 1000- Base plate- MonoBlock for 5 x 250ml Flasks- 2 x 100ml Flask Insert- 2 x 50ml Flask Insert- 1 x 25ml Flask Insert- 5-way Clamp (Velcro Strap)- 5-way Clamp (Silicone Strap & Long Handle)- 2 x Water Manifold- 1 x Gas/Vacuum Manifold- 650mm Split RodType PK Cat. No.MR Hei-Standard packageMR Hei-Standard package UKMR Hei-End Multi-Workstation packageMR Hei-Standard Multi-Well packageMR Hei-Tec Multi-Well package111119.720 1576.240 3409.720 1599.720 1789.720 189We can supply thismanufactorer’swholeproduct range !E & OE.www.wenk-labtec.com407

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingGENERAL CATALOGUE EDITION 17121 2Accessories for Magnetic Stirrers - Safe Heating and MixingHeat-On BlocksThese attachments are by far the safest, fastest and most efficient method for heatingand mixing solutions in round bottom flasks from 10ml to 5L.Heat-On aligns accurately to every flask insuring maximum surface contact and fast heat transfer.Eliminates the mess from cleaning flasks after removing from an oil bath or hazardous spillswhen an oil bath slips off a stirring plate. As a result oil as a heat transfer media is made redundantand your lab is a safer place with the Heat-On block system.- This unique design prevents glass breakage and protects you from spilled chemicals or solvents- The high temperature range provides unlimited safety for applications up to 260°C- A unique PFA coating on the aluminum Heat-On body allows for superior chemical resistanceand many years of service life- 150ml of water boils in less than 11 minutesHeidolphMulti-Well Holder and InsertsThis unique Multi-Well Holder is designed to hold either one or two inserts for flasks. The inserts are available for 10ml,25ml, 25ml, 100ml and 150ml flasks. Flask inserts also feature cut-away sides for use with two or three neck flasksand accepts the optional safety lifting handles.Type Description PK Cat. No.Heat-On Multi-Well BasicHeat-On Multi-Well1 Multi-Well Holder, 3 inserts1 Multi-Well Holder, 6 inserts119.720 1959.720 19633Heated magnetic stirrer hotMIX 1 with internal controlNEW!Price-optimized magnetic stirrer, 100% maintenance-free and wear-free by inductive 2mag magnetic drive 2magconcept for mixing of solutions, speed range from 100rpm up to 1600rpm, jerk-free stirring even at low speeds.SoftStart for reliable catching/centring and safe accelerating of the stirring bar, resistant stainless steel housing for easyand fast cleaning, spill over protection, extremely robust construction. Hot plate made from resistant aluminium alloy,max. heating temperature +200°C, socket for contact thermometer (accessory), warning-LED in case of hot plate,3 integrated over temperature protection loops against overheating.SpecificationsOperating conditions:-10°C to +40°C at 80% R.H. max.Casing:Stainless steelProtection category: IP 20TypeHotplateRotationspeedStirringcapacityDimensions(W x D x H)Power Weight PK Cat. No.hotMIX 1hotMIX 1AluminiumPTFErpm ml mm W kg100 to 1600 1 to 2000120 x 140 x 8010 2.0100 to 1600 1 to 2000120 x 140 x 8010 2.0116.238 0779.646 03044Accessories for heatable magnetic stirrerNEW!Designed for all hotMIX stirrers. Precise and fast control by Fuzzy-Logic-Technology,2magmeasuring range -50°C up to +300°C, accuracy ±1°C, identification of probe breakdownand probe short circuit, safety- and control circuit according to DIN 12878 Class 1 and 2,display background illumination, LED indication for control status, IP 65, approx. 150 g, incl. clamp for support rod.Type PK Cat. No.Contact thermometer mixTHERM with Pt1000 sensor 1 9.646 031408E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingHeated mixing systems with external control, STIRRING DRYBATHNEW!For viscosity control, R&D, combinatorial chemistry, biological applications, elution of plastics.2magFor quality control of nutrients, chemistry and wastewater technologies.Mixing: maintenance-free, 2mag induction motor, 4-point power setting for efficiency with high viscosity media andreduced power for permanent running without heating samples. Digital display for speed range, power andtemperature. Soft-start for precise control of stirring bar.Heating: PTFE-coated, solid aluminium heating block, resp. heating plate for high chemical resistance, with safetyoverheat cut-out. Stainless steel housing.Includes separate control system for stirring and heating. 3 years warranty. Made in Germany.19.645 952SpecificationsSpeed range:Stirring power:Max. temperature:100 to 2000 rpm10/20/30/40 W (4-steps)+200°CTypeStirringpositionsStirringcentredistancesBlock holeDia. x depthStirringcapacityDimensions(W x D x H)Weight PK Cat. No.6* **15* **15-100*15-250*6151515* with SafeControl.**Heating plate.mm mm ml mm kg1301 - 1500250 x 430 x 7515.0651 - 1000250 x 430 x 7515.06557,5/48 1 - 150295 x 445 x 11023.08471,5/78 1 - 400345 x 525 x 14031.011116.241 0009.646 0179.645 9529.645 9531Accessories for heatable mixing systemsNEW!2magDescription PK Cat. No.External temperature sensor Pt100Extension for SafeControl, switchable external sensor,required for external temperature sensor Pt100State aid for the vertical position of the control unit,including mounting materialControl unit SafeControl, replacement11119.646 0209.646 0219.646 0229.646 0232Laboratory hotplate/stirrer SLRFor stirring, heating and controlling. As well as the ability for rapid andSI Analytics GmbHtemperature-controlled heating, many applications also require liquids to be stirred.You can use the SLR hotplate/stirrer to provide gentle or vigorous liquid stirring and, if required, gradual heating orcooling. All functions are displayed on the clear LCD panel and can be monitored. The stirrer and heater are individuallycontrolled via manual control knobs. The stirrer can be set from 100rpm to 1100rpm x 10rpm. increments. The averagerpm is shown as a bar graph. True running is achieved even at the lower end of the rpm range. Heating can also beadjusted over 24 steps attaining an average of 0.9kW at the top of the range. It is possible to regulate temperaturesbetween 25°C and 200°C with variations of between ±2 and ±5°C using the Pt1000 temperature sensor, depending onthe liquid volume, heat capacity and ambient temperature conditions. The display panel informs the user at 5 secondintervals of the pre-set desired temperature and the actual temperature. The average thermal energy generated is alsoshown as a bar graph.2Type Zones HeatedzoneSurface Rating Stirrer Dimensions(W x D x H)PKCat. No.mm mm W mmSLR 1 155 dia. 235 x 235 900 integral 240 x 370 x 85 1 9.720 130E & OE.www.wenk-labtec.com409

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heatingGENERAL CATALOGUE EDITION 1711 2Magnetic Stirrer/Hotplate, CB162Maximum speed 1500rpm, volume stirred 15L and maximum temperature 450°C.With glass ceramic top plate 160mm x 160mm, microprocessor controlled heatingwith separate safety circuit to prevent overheating, variable speed control with off position,stirrer 'on' and heater 'on' warning lamps.With facility for mounting a 12.5mm diameter retort rod at rear of the case.Overall (WxDxH) 190mm x 300mm x 110mm.Weight 3.4 kg. For 90-250V 50/60Hz single phase supplies. Hotplate rating 550W.With BioCote, silver-based, antimicrobial protection.StuartType PK Cat. No.2CB162 1 9.950 41935Stirrer hotplates, CB302 and SB302- choice of robust aluminium or chemically resistant, ceramic top plate- flashing "Hot" warning light to warn when top plate is too hot to touch- independent safety circuit to protect against overheating- Powerful stirring action up to 1500rpm and volumes of up to 15L- ideal for handling large vessels- fitting for retort rod and supplied complete with 2mm x 25mm PTFE coated stir bars.StuartModel CB302 has a glass ceramic top that has excellent chemical and temperature resistance. The chemical propertiesmake the surface very easy to keep clean and the thermal properties allow very high plate temperatures while ensuringthe edges stay cooler, reducing the chance of accidental burns.9.645 333Model SB302 has a robust aluminium/silicon alloy top plate. The very good heat transmission of this material givesrapid heating and ensures even temperature distribution across the whole of the plate.4With BioCote, silver based, antimicrobial protection.59.645 334SpecificationsPlate dimensions:Heated area:Heater Power:Stirrer speed range:Overall dimensions (WxDxH):Weight:Supply requirements:Maximum stirring capacity:Max. plate temperature:CB302/SB302300 x 300mm200 x 200mm/300 x 300mm1200W/600W100 to 1500rpm300 x 365 x 105mm7kg230V, 50Hz15l450°C/300°CType Description PK Cat. No.CB302SB302SR1Ceramic plate, 1200WAluminium plate, 600WRetort Rod 600 x 12.5mm1119.645 3339.645 3349.645 33534We can supply thismanufactorer’swholeproduct range !410E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/with heating- hotplates/Accessories1 2Magnetic stirrer/ hotplate SB162Maximum speed 1500rpm, volume stirred 15L, and temperature 325°C.StuartCast aluminium/silicon alloy hotplate 160mm x 160mm, accommodating beakers up to 15L capacity.With microprocessor speed and temperature control with separate safety circuit, arbitrary scaled dial setting,stirrer 'on' and heater 'on' warning indicators and facility for mounting a 12.5mm retort rod at the rear of the case.Overall 190mm x 300mm x 112mm WxDxH. Hotplate rating 750W.With BioCote, silver-based, antimicrobial protection.1Type PK Cat. No.SB162 1 9.950 41623 4Magnetic stirrer/hotplate, 3-Position, SB162-3Maximum speed 1500rpm and maximum temperature 325°C.StuartWith 3 independently adjustable aluminium hotplates 160mm x 160 mm,overheat protection mechanism and warning light which switches on when the plate temperature exceeds 50°C.With facility for mounting a 12.5mm retort rod at the rear of each plate and 3mm x 25mm PTFE coated followers.Overall (WxDxH) 600mm x 270mm x 110mm. Weight 11kg. For 230V 50/60 Hz single phase supplies.Hotplate 2250W. With BioCote, silver-based, antimicrobial protection.34TypeStirringpositionsPKCat. No.SB162-3 3 1 9.950 4245LLG-Magnetic stirring bars, cylindrical, PTFESuitable for many applications. Further sizes available on request.NEW!5Length Dia. PK Cat. No.mmmm1210202530404550253666688881010101010101010109.198 7669.198 9109.198 9209.198 9259.198 9309.198 9409.198 9459.198 9509.198 767E & OE.www.wenk-labtec.com411

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/AccessoriesGENERAL CATALOGUE EDITION 1711Magnetic stirring bars, cylindrical, PTFEEncapsulated in PTFE. Cylindrical. Round, smooth surface. Versatile.Further sizes available on request.BRANDLength Dia. PK Cat. No.mmmm2.53.55.06.07.08.010.010.012.013.015.015.020.025.030.035.040.045.050.060.070.080.02.53.52.03.02.03.03.06.04.53.06.04.56.06.06.06.08.08.08.09.09.09.011111111111111111111119.197 5029.197 5059.197 5039.197 5069.197 5049.197 5099.197 5079.197 5109.197 5129.197 5089.197 5159.197 5149.197 5209.197 5259.197 5309.197 5359.197 5409.197 5459.197 5509.197 5609.197 5709.197 58022Magnetic stirring bars Ikaflon ® , cylindrical, PTFERound profile, PTFE coated.IKALength Dia. PK Cat. No.mmmm1061 9.197 6461561 9.197 6472081 9.197 6482581 9.197 6493081 9.197 6504081 9.197 6515081 9.197 65380101 9.197 656110271 9.197 661155271 9.197 65733Magnetic stirring bars, triangular, PTFETriangular. Wedge-shaped, ideal for dissolving solids and re-suspending sediments due toscraping action. Angular surface produces high turbulence, even at low stirring speeds.NEW!BRANDLength Dia. PK Cat. No.mmmm1220252535405055806881410141214141111111117.019 6697.019 6709.197 6527.019 6727.019 6739.197 6547.019 6759.197 6559.197 65844Magnetic stirring bars, Trika ® , triangular, PTFETriangular profile, PTFE coated, for liquid suspensions.IKALength PK Cat. No.mm2540119.197 6599.197 660412E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingMagnetic stirrers / hotplates/Accessories1Magnetic stirring bar Asteroid 40, triangular, PTFENEW!1More than 4x higher torque transmissible. Unbeatably enhanced mixing effect in2magcomparison to conventional stirring bars. Strong, stable, long-lasting magnetic field,with no demagnetization effect. Concave design for minimal surface contact and reliable rotation,triangular shape for powerful shear force and enhanced mixing at lower rotational speeds. 300% less PTFE abrasionthan comparable round shape stirring bars, significantly higher rotation speeds achievable, high quality, even andsealed PTFE encapsulation. Conform to FDA requirements, steam sterilisable at 121°C. Multiple enhancements againstall types of magnetic stirrers.Length Dia. Weight PK Cat. No.mm mm kg40 28 0.06 1 9.646 0402Magnetic stirring bar set, RS 1Comprises of one each of a plain and a cylindrical Ikaflon ® stirring bar, 10mm to 80mmlong and 25mm and 40mm long Trika ® triangular bars.IKA2Type PK Cat. No.Set-RS 1 1 9.197 6863Magnetic stirring bars, dumbbell, PTFEPlastibrand ® . PTFE. Dumbbell-shaped. Excellent centring, low surface contact and highturbulence even at low stirring speeds, ends 20mm diameter. Stem diameter 8mm.NEW!BRAND3Length PK Cat. No.mm3755119.197 6439.197 6454Magnetic stirring bars, oval, PTFEEncapsulated in PTFE. Oval. Ideal for round bottom flasks.BOLA4Length Dia. PK Cat. No.mmmm20253035405065701012151520202020111111119.197 5909.197 5919.197 5929.197 5939.197 5949.197 5959.197 5969.197 5975LLG-Magnetic stirring bars, PTFE, sphericalFor test tubes or vigorous, eccentric stirring.NEW!5Dia. PK Cat. No.mm12 10 9.198 9126Magnetic stirring bars, spherical, PTFEFor test tubes or vigorous, eccentric stirring.BRAND6Dia. PK Cat. No.mm12 1 9.197 599E & OE.www.wenk-labtec.com413

4. Stirring, Shaking, MixingMagnetic stirrers / hotplates/AccessoriesGENERAL CATALOGUE EDITION 1711Magnetic stirring bars STARHEAD ® , Type DS6600, PTFEType DS6600. PTFE-coated Alnico-V-Magnet. Symmetrical stirring fins above and belowgenerate a strong vortex action, even at low speeds. For flat or round bottom containers.Resistant to chemicals and temperatures up to +260°C. Autoclavable.NalgeneDia. Height Type PK Cat. No.mmmm1014172230354058812131512121415DS6600DS6600DS6600DS6600DS6600DS6600DS6600DS6600111111119.198 2119.198 2129.198 2139.198 2149.198 2159.198 2169.198 2179.198 21822Magnetic Stirring Beakerliner, PTFEPTFE-encapsulated magnetic core (Alnico 5) axially mounted in a guide cagemade of PTFE, universal chemical resistance. No shear action on the bottom of the beaker,smooth running in glass beakers also on an uneven bottom.The cage acts like a baffel and thus provides optimum mixing results.NEW!BOLABeakerExt. Height Length Dia. PK Cat. No.capacitydiam.ml mm mm mm mm250, 400600, 800, 100020003000, 500067741031252129324850.060.080.0106.08.09.010.025.011119.197 5859.197 5869.197 5879.197 58833LLG-Magnetic Stirring Bar Retrievers, PTFEMagnetic bar retriever is an essential tool to pick up the magnetic bars. It has a powerfulmagnet sealed in one end and a long stem of total 300mm length.NEW!Length Dia. PK Cat. No.mmmm300 8 1 4.008 50144Magnetic Stirring Bar Retrievers, PTFEPTFE-encapsulated stirring bar retriever with strong permanent magnet (Alnico 5),universal chemical resistance. For the removal of stirring bars from aggressive liquids,prevents loss of stirring bars. Lower end diameter 10mm.NEW!BOLALength Dia. PK Cat. No.mmmm150250300350888811119.197 7179.197 7256.078 8729.197 73555Magnetic Stirring Bar Retrievers, PEPE. With fully encapsulated magnet at one end and a retaining ring at the other.VITLABLength PK Cat. No.mm300450119.197 7409.197 742414E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Instruments1Overhead stirrers RW 11 basic "Lab egg"Laboratory stirrers for low volumes up to 2L (H2O) with a unique design.The lower half, which is exposed to the vapour from the medium being processed,is constructed in high quality borosilicate glass. A blade rotor is included.Can be used worldwide with a voltage range of 100V to 240V.SpecificationsMax. stirring vol. (water):2LMotor rating, input/output: 8/1WViscosity range:0 to 100mPasSpeed range:0 to 2000rpmPlug-in coupling (diam.):4mmSupport rod (diam.):integrated (10mm)Max. torque (plug-in coupling):0.8 NcmDimensions (WxDxH):86 x 175 x 89mmWeight:0.39kgHousing IP rating to DIN EN 60529:IP42Tested to DIN EN IEC 61010-1.IKA1Colour PK Cat. No.Creamy blue 1 9.816 613Optional accessories: R 1001 Paddle stirrer, R 1002 Screw-type stirrer, R 104 StandSpare part for overhead stirrer RW 11 basic "Lab egg"Tested to DIN EN IEC 61010-1.IKAType Description Stirrerdia.Shaftdia.ShaftlengthPKCat. No.R 1002R 1001Propeller stirrer, fine bladeBlade rotormm mm mm124140344160119.816 6197.018 06523239.816 6197.018 0654Overhead stirrer RW 16 basicFor simple stirring tasks up to 10L (H2O).Stepless speed adjustment without gear changing- Compact housing- Quiet operation- With electonical safety circuit- Non-locking motor with overload capacityEspecially suitable for schools, universities and test laboratories.IKA4SpecificationsStirring volume:10LViscosity range:10000mPas.Motor rating input/output: 75/55WOutput max. at stirring shaft:53WTorque max. at stirring shaft:40NcmSpeed range:40 to 1200rpmSpeed indication: Scale (1 to 10)Chuck shaft range:0.5 to 10mm dia.Hollow shaft, inner diam.:11mmDiam./length of support rod:13mm/160mmDimensions (WxDxH):80 x 190 x 222mmProtection class acc. to DIN EN 60529:IP42Weight:2.8kgSupply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.RW 16 basic 1 9.816 611Optional accessories: Stands: R 1825, R 1826, R 1827, R 182 Boss head clamp, FK 1 Flexible coupling, RH 3 Strap clamp, R 301 Stirring shaft protection,Stirring elements: e.g. R 1342, R 1330, R 1373E & OE.www.wenk-labtec.com415

4. Stirring, Shaking, MixingOverhead stirrers/InstrumentsGENERAL CATALOGUE EDITION 1711Overhead stirrer RW 20 digital- Technical improvements on the trusted RW20 series design, mechanically controlled- with digital display- robust, ergonomic design- constant power-drive- two speed ranges for universal use from 60rpm to 2000rpm- hollow-shafted chuck for rotor shaft height adjustment (only when stationary)IKASpecificationsStirring volume (H2O):20LViscosity range:up to 10000mPasMotor rating input/output: 70/35WOutput max. at stirring shaft:26WMax. stirring shaft torque (at 100rpm.):150NcmSpeed range I (at 50Hz):60 to 500rpm.Speed range II (at 50Hz):240 to 2000rpm.Chuck range:0.5 to 10mmDiameter/length of extension arm:13mm/160mmDimensions (WxDxH)88 x 212 x 294mmWeight:3.1kgProtection class acc. to DIN EN 60529:IP20Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.RW 20 digitalRW 20 digital UK119.816 6226.227 717Optional accessories: Stands: R 1825, R 1826, R 1827, R 182 Boss head, FK 1 Flexible coupling, RH 3 Strap clamp, R 301 Stirring shaft protection,Stirring elements: e.g. R 1342, R 138122Overhead stirrer RW 28 basicHighly efficient, 2-range (high speed or high torque), mechanically controlled,overhead stirrer for volumes up to 80L (H2O).Suitable for work in laboratories and technology colleges.Supplied without rotor.IKASpecificationsMax. volume stirred (water):80LMax. sample medium viscosity:50000mPasMotor rating input/output: 220/90WOutput max at stirring shaft:90WMax. torque at chuckper 60 rpm:1144Ncmper 100 rpm:900Ncmper 1000 rpm:86NcmSpeed display:scaleHollow shaft, inner diameter:10.5mmDiameter/length of support rod:16mm/145mmSpeed range I:60 to 400rpm.Speed range II:240 to 1400rpm.Chuck range:1 to 10mmOverall (WxDxH):123 x 252 x 364mmWeight:7.4kgProtection class DIN EN 60529:IP42Supply requirements:230V 50HzTested to DIN EN IEC 61010-1.Type PK Cat. No.RW 28 basic 1 9.816 629Optional accessories: Stands: R 2722, R 2723, R 271 Boss head clamp, FK 1 Flexible coupling, RH 5 Strap clamp, R 301 Stirring shaft protection,R 301.1 Support holder, Stirring elements: e.g. R 1345, R 1300Accessories for the IKA overhead stirrers please see page 419416E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Instruments1Overhead stirrer RW47 DThe most powerful Ika stirrer for laboratory, technical school and pilot plant assemblies,mechanically controlled.- for stirring tasks up to 200L (H2O).- two speed ranges provided for very viscous media and for intensive mixing.- 3-phase motor supplied without mains cables or plugs.Specifications:Max. volume stirred (H2O):200LViscosity limit:100000mPasMotor rating input/output: 513/370WOutput at the shaft:300WMax. torque at the shaftat 60rpm4642Ncmat 100rpm3000Ncmat 1000rpm285NcmSpeed range I (at 50 cycles per second):57 to 275rpmSpeed range II (at 50 cycles per second):275 to 1300rpmSpeed range I (at 60 cycles per second):69 to 330 rpmSpeed range II (at 60 cycles per second):330 to 1560rpmChuck clamping range:3 to 16mmHollow shaft, inside diameter:13mmAttachment:FlangeDimensions (W x H x D):145 x 340 x 445mmWeight:15kgProtection class acc. to DIN EN 60529:IP54Supply requirements:400V 50Hz 3ph./230V 60 Hz 3ph.Tested to DIN EN IEC 61010-1.IKA1Type PK Cat. No.RW 47 D 1 9.816 647Optional accessories: R 472 Floor stand, R 474 Telescopic stand, R 302 Shaft protection, Stirring elements: e.g. R 2305, R 2311, SI 400 Safety switch,Clamps: SI 472, SI 4742Overhead stirrer Eurostar digitalLaboratory stirrer that can be used up to the medium viscosity range.- Constant speed by microprocessor control- Digital display presents set and actual speed- Infinitely adjustable without gear shifting- Slim casing- Quiet operation- Safety circuit- Non-locking, overload capabilities- Push-through agitator shafts- Enhanced safety as a result of smooth startIKA2SpecificationsStirring volume (H2O):20LViscosity limit:10000mPasMotor rating input/output: 75/55WOutput max. at stirring shaft:53WTorque max. at stirring shaft:30NcmSpeed range:50 to 2000rpm.Chuck shaft range:0.5 to 10mmHollow shaft, inner diam.:11mmDiam./length of extension arm:13mm/160mmDimensions (WxDxH):80 x 190 x 222mmWeight:2.8kgProtection class DIN EN 60529:IP42Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.EUROSTAR digitalEUROSTAR digital UK119.816 6726.202 476Optional accessories: Stands: R 1825, R 1826, R 1827, R 182 Boss head clamp, FK 1 Flexible coupling, RH 3 Strap clamp, R 301 Stirring shaft protection,Stirring elements: e.g. R 1342, R 1330, R 1373E & OE.www.wenk-labtec.com417

4. Stirring, Shaking, MixingOverhead stirrers/InstrumentsGENERAL CATALOGUE EDITION 171Overhead stirrers, Eurostar power basic/control-viscSingle-range, high torque, laboratory overhead stirrers with powerful, 130W motors.Provide constant torque over their entire speed range from 50rpm to 2000rpm.- constant speed by microprocessor control- infinitely adjustable without gear shifting- Safety circuit- non-locking, overload capability- push-through stirrer shafts- enhanced safety due to soft-start- analogue recording of speed parameters availableThe Eurostar Power control-visc also has an RS232 interface for control via the user's PC, an integral digital torquetrend and speed display as well as an analogue interface for documentation of speed range and axial torque.Supplied without rotor.IKA29.816 674SpecificationsStirring volume (H2O):40LViscosity limit:50000mPasMotor rating input/output: 130/110WOutput max. at stirring shaft:105WTorque max. at stirring shaft:60NcmSpeed range:50 to 2000rpmChuck range:0.5 to 10mmHollow shaft, inner diameter:11mmDiameter/length of extension arm:16mm/200mmOverall (WxDxH):80 x 190 x 253mmWeight:3.8kgProtection class acc. to DIN EN 60529:IP42Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.9.816 678EUROSTAR power basicEUROSTAR power basic UKEUROSTAR power control-viscEUROSTAR power control-visc UKFurther agitators for the "high viscosity" range (Eurostar power control visc P1, P4 and P7) available on request.Optional accessories: Stands: R 2722, R 2723, R 271 Boss head clamp, FK 1 Flexible coupling, RH 5 Strap clamp, R 301 Stirring shaft protection,Stirring paddles: e.g. R 1345, R 1375Options for Eurostar power control-visc only: labworldsoft ®11119.816 6744.007 9259.816 6786.230 5721233Overhead stirrer Eurostar power control-visc 6000High-performance, digital laboratory stirrer for tasks within the "medium viscosity"range. With the same features as Eurostar power control-visc, but additionally:- Speed range up to 6000rpm- Stirrer shafts are not push-through- Cone seat for precision shaft (stirring elements can be screw connected, please order separately)- Analogue output of speed and torqueIKASpecificationsStirring volume (H2O):20LViscosity limit:10000mPasMotor rating input/output: 130/110WOutput max. at stirring shaft:95WTorque max. at stirring shaft:15NcmSpeed range:150 to 6000rpmSpeed display:digitalDiameter/length of extension arm:16mm/220mmOverall (WxDxH):80 x 190 x 317mmWeight:4.8kgProtection class DIN EN 60529:IP42Supply requirements:230V 50/60 HzTested to DIN EN IEC 61010-1.Type PK Cat. No.Eurostar power control-visc 6000 1 6.224 437Further agitators for the "high viscosity" range (Eurostar power control visc P1, P4 and P7) on request.Optional accessories: Stands: R 2722, R 2723, R 271 Bosshead, RH 5 Strap clamp, R 301 Stirring shaft protection, R 1402 Dissolver, R 1405 Propeller,R 1401 Propeller, labworldsoft ®418E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Instruments-StirrersStirrers for overhead stirrer Eurostar power control-visc 6000IKA1Type Description ForVolumelR 1401 Propeller1 to 30R 1405 Propeller0.25 to 30R 1402 Dissolver1 to 30Rotordiam.mm554542PK111Cat. No.9.197 0549.197 0539.197 0551229.197 0539.197 0553 4 KPG stirrer shafts, DURAN ®DURAN ® . Interchangeable. Bearing surface ground and polished.WG:4 fixed bladesWS:2 movable bladeKPG diameter:10mmKPG length:160mm.DURAN Group3Type Length Forneckdia.mmmmWG 10WG 10WG 10WG 10WS 10WS 10WS 10WS 103203704104403203704104406060606025252525PK11111111Cat. No.9.197 3219.197 3229.197 3239.197 3249.197 3119.197 3129.197 3139.197 3144StandsIKAType Description Roddia.HeightMax.loadPKCat. No.R 1825R 1826R 1827R 2722R 2723R 474R 472Stand with baseplateStand with baseplateStand with baseplateH-standTelescopic standTelescopic standFloor standmm mm kg16560516800516100053410101034620 - 10101048500 - 10003080x80980 - 18603011111119.224 0319.224 0329.224 0339.224 0269.224 0289.816 7359.816 736567856789.224 0319.224 0269.816 7359.816 736E & OE.www.wenk-labtec.com419

4. Stirring, Shaking, MixingOverhead stirrers/StirrersBossheadsGENERAL CATALOGUE EDITION 17IKATypeJawopeningPKCat. No.R 182R 270R 271mmStand / extension arm: 6 to 16Stand / extension arm: 25 to 36 / 5 to 21Stand / extension arm: 34 / 161119.224 2929.224 2939.224 2661231239.224 2929.224 2939.224 266Strap clampsIKATypeRoddia.VesselØPKCat. No.mmRH 3 8 to 16RH 5* 25 to 36*with R 270 bossheadmm40 to 30040 to 300119.224 7619.224 76245459.224 7619.224 76266Flexible clutchRequired for stirring tasks using glass stirring rods.The flexible coupling compensates for any structural variances.IKAClamping range:Torque max.6 to 10mm10 NcmType PK Cat. No.FK 1 1 9.197 060420E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Stirrers1Mechanical Stirrers RZR seriesPowerful StirringHeidolph1These models are ideal for standard stirring tasks. They are designed to mix and disperse media, that requireno-reproducible results, of high viscosity applications under high speeds. The torque to speed graph is provided belowto represent this dynamic relationship.- A through-shaft design allows for easy adjustment of the impeller position that is most convenient for you- A 2 gear stage design guarantees the highest power over the entire speed range- The speed is adjustable over a large scale from 40rpm to 2000rpm- An optimal shaft guard prevents any accidents involving contact with the impeller shaft running at high speeds- Shipment includes a 10mm chuck as standardRZR 2020 and RZR 2021 - For standard applicationsBoth are outstanding choices for all medium to high viscosity mixing tasks with a maximum viscosity of 60000mPa s- Model RZR 2021 features a bright digital display for accurate speed setting. Model RZR 2020 is designed forapplications that do not require accurate settings and comes without a display.- A 2 gear stage design guarantees the highest power over the entire speed range of 40rpm to 2000rpm- A maintenance-free sparkles motor ensures 27W output power and performs stirring torque peaks up to 400NcmRZR 2041 - For high viscosityThe model RZR 2041 is an excellent choice for any high viscosity mixing with a maximum viscosity up to 100000mPa s- This model features a bright digital display for accurate speed settings- A 2 gear stage design guarantees the highest power over the entire speed range of 40rpm to 2000rpm- A maintenance-free sparkles motor ensures 37W output power and performs stirring torque peaks up to 520NcmType Power Speed range Max.torqueSpeedcontrolPKCat. No.RZR 1RZR 2020RZR 2020 UKRZR 2021RZR 2021 UKRZR 2041W rpm. Ncm18 I: 35 - 250, II: 280 - 2200 10027 I: 40 - 400, II: 200 - 2000 40027 I: 40 - 400, II: 200 - 2000 40027 I: 40 - 400, II: 200 - 2000 40027 I: 40 - 400, II: 200 - 2000 40037 I: 40 - 400, II: 200 - 2000 520dialdialdialdigitaldigitaldigital1111119.816 5109.816 4006.201 9819.816 4026.240 1919.816 389Accessories for Overhead StirrersNEW!HeidolphType PK Cat. No.Stand clamp for holder rod 13 to 32mmChuck, clamping range 10mmStand S 2, 425 x 420 x 700mm, 5.8kgStirrer shaft guard, Plexiglass, height-adjustableFlexible shaft including chuck, 8mmSoftware Watch & Control for ProfibusBase Stand S2 XXLFlexible stirrer coupling with clamping pin for agitator shaft dia. 10mmStirrer shaft gland NS 29/32 - PTFETelescopic standChuck 8mm for RZR 1Flexible stirrer coupling with clamping pin for agitator shaft dia. 5 to 8mm for RZB 1Remote control with start/stop function11111111111119.816 5629.816 5639.816 5649.816 5667.047 0436.203 5186.228 5007.047 0427.076 4157.621 8119.816 5089.816 5119.816 5122345672345679.816 5639.816 5649.816 5667.047 0437.076 4159.816 511E & OE.www.wenk-labtec.com421

4. Stirring, Shaking, MixingOverhead stirrers/StirrersGENERAL CATALOGUE EDITION 1711Electronic Stirrers RZR SeriesPowerful StirringHeidolph- A through-shaft design allows for easy adjustment of the impeller position to make height adjustments moreconvenient- 2 gear stage design guarantees the highest power over the entire speed range and is designed for continuousoperation, even in polymer research- All electronic stirrers maintain exact speed under changing loads and even can accept 200% peak overload for alimited period of time without interrupting the process- Reduce process times by utilizing patented inoJET ® Impellers for mixing gels and other challenging media with ease- The motor will be switched off if a high thermal load situation occurs to provide operator safety- Sealed housing guarantees longevity and maintenance-free 24 hour operation in an aggressive environmentRZR 2051 control and RZR 2052 control - For standard applicationsBoth RZR 2051 control and RZR 2052 control are 1 gear stage stirrers which hold speed constant under changing loads- RZR 2051 control: Accepts torque of 40Ncm in an overload situation and 20Ncm for continuous operation at speedsfrom 50rpm to 2000rpm. Viscosity range up to 10000mPa s- RZR 2052 control: Accepts torque of 180Ncm in an overload situation and 90Ncm for continuous operation at speedsfrom 30rpm to 1000rpm. Viscosity range up to 40000mPa s- Calibrate your torque at the beginning or even during your process to monitor viscosity changes over time- Speed control uses rheostat or interface- Enhanced bright digital display for torque and speedRZR 2102 control and RZR 2102 control Z - For high viscosityBoth models RZR 2102 control and RZR 2102 control Z are 2 gear stage stirrers which hold speed constant undersignificant load changes such as sticky media like polymers for example- Choose between 2 options for gear setting and experience the power of the 100W output motor which allows fortorque of 400Ncm in an overload situation and 200Ncm for continuous operation at speeds from 12rpm to 2000rpm- Calibrate your torque at the beginning or even during your process to monitor viscosity changes over time- Speed control uses rheostat or interface- Viscosity range up to 100000mPa sRZR 2102 control Z - For high viscosityFeatures identical technical specifications as the RZR 2102 control except for:- Speed: 4rpm to 540rpm- Torque: 800Ncm in an overload situation, 700Ncm at continuous operation- An additionally flanged planet gear for extreme viscosities up to 350000mPa sThe RZR 2102 control Z does not feature the through-shaft design for impeller adjustmentType Power Speed range Max.torqueSpeedcontrolPKCat. No.RZR 2051 controlRZR 2052 controlRZR 2102 controlRZR 2102 control UKRZR 2102 control ZW rpm. Ncm5050 to 2000 4010030 to 1000 1801001: 12 to 400, 2: 60 to 2000 4001001: 12 to 400, 2: 60 to 2000 4001001: 4 to 108, 2: 17 to 540 800DigitalDigitalDigitalDigitalDigital111119.816 3959.816 3989.816 3967.071 0459.816 397422E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Stirrers3PLR-Compressed air stirrers without/with tachometer1Basic models include:- PLR motor- all-stainless steel housing, grade 1.4104- continuously adjustable, fine control valve speed regulation- 14mm diameter support arm with 9mm diameter nozzle tubing connector- operating pressure max. 6bar- power output 200W at 6bar- clockwise rotation- air consumption 260L/min. at 6 bar- output shaft L x diameter 24mm x 10 mm- stirring capacity max. 25LPLR 10 constructed to Ex II 2G c IIB T4,PLR 11 to PLR 13, PLR 28 constructed to Ex II 2G c IIB T5 according with Directive 94/9 EG (ATEX).Buddeberg29.778 950TypeOff-loadspeedrpm.PLR 1015000PLR 111750PLR 121000PLR 28600PLR 1380PLR 10T*15000PLR 11T*1750PLR 12T*1000PLR 28T*530PLR 13T*80* analogue tachometerTorque Gears For fluidviscosityNm0.3low2.31 medium3.52 high7.62 high25.03 maximum0.3low2.31 medium3.52 high7.62 high25.03 maximumPK1111111111Cat. No.9.778 9509.778 9519.778 9529.778 9549.778 9539.778 9609.778 9619.778 9629.778 9649.778 9631239.778 960Compressed air powered stirrers, PLR, accessories9.779 052: Chuck:For quick, easy attachment of stirring rods.Not to be used in potentially explosive atmospheres.Buddeberg9.779 003: Connection couplings:Fixed-diameter connection for motor/magnetic coupling drive shaft and stirring rod. Suitable for use in potentially explosive atmospheres.9.198 010: Flexible glass tube couplings:For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides exact alignment of motor and shaft,and evens out axial and height differences. Accepts 6mm to 10mm diameter shafts.9.779 013: Flexible glass tube couplings:For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides exact alignment of motor and shaft,and evens out axial and height differences. Output drive accepts 6mm to 10 mm diameter shafts, input shaft receiver fits 10mm or 10/13mm diameter drives,secured by allen screws.9.779 065: Double-Cardan-Coupling:With 8 mm dia. hexagonal input drive receiver and 6mm square socket drive output.Type Description PK Cat. No.F 8VK 10 x 6VK 10 x 8VK 10 x 10K 10K 10/13PK 10PK 10/13DCKChuck for shafts 0.5 to 8.5mmConnection couplingConnection couplingConnection couplingFlex coupling receiver i. d. 10mmFlex coupling receiver i. d. 10/13mmFlex coupling receiver i. d. 10mmFlex coupling receiver i. d. 10/13mmStainless steel, L = 110mm1111111119.779 0529.779 0039.779 0059.779 0069.198 0109.197 4009.779 0139.779 0149.779 06545678456789.779 0529.779 0039.198 0109.779 0139.779 065E & OE.www.wenk-labtec.com423

4. Stirring, Shaking, MixingOverhead stirrers/StirrersGENERAL CATALOGUE EDITION 1711Compressed air, floor standing, stirrersBasic modules include:- motor type: PM- plastic-coated housing and stand base- valve for stepless speed regulation- tubing nozzle 9mm diameter- spherical clamping device with support arm 16mm diameter length 200mmfloor stand with rod (W x H - 600mm x 1000mm) and cross bosshead- operating pressure max. 6bar- power output 560W- air consumption 800 L/min- clockwise rotation- stirring capacity approx. 200L- all data shown is at 6bar air pressureBSR 56 available to Ex II 2G c IIB T5 according with Directive 94/9 EG (ATEX)BuddebergTypeBSR 56/160-VBSR 56/65-VBSR 56/30-VOff-load Torque Viscosity Weight Gears PK Cat. No.speedrangerpm. Nm kg25003.0 low13.511 9.779 16113008.1 medium14.121 9.779 162600 17.5 high14.121 9.779 17822Floor standWith angle foot, side length 600mm, rod o.d 34mm.BuddebergLength PK Cat. No.mm1000 1 9.224 0003Propeller stirrers, 3-blade, stainless steel/PTFEIKATypeStirrerdia.Shaftdia.ShaftlengthRotationspeedPKCat. No.49.197 021R 1381R 1382R 1385R 1388R 1389**PTFE coatedmm mm mm rpm458350 2000558350 200014010550 80014010800 400758350 800111119.197 0219.197 0229.197 0239.197 0249.197 026349.197 02655Propeller stirrer, 4-bladed, stainless steelIKATypeStirrerdia.Shaftdia.ShaftlengthRotationspeedPKCat. No.R 1342R 1345R 2302mm mm mm rpm508350 20001008540 80015013800 6001119.197 0069.197 0099.197 041424E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Stirrers1Turbine stirrer rotors, stainless steelIKA1TypeStirrerdia.Shaftdia.ShaftlengthRotationspeedPKCat. No.R 1311R 1312R 1313mm mm mm rpm308350 2000508350 20007010400 8001119.197 0309.197 0319.197 0322Dissolver stirrers, stainless steelIKA2TypeStirrerdia.Shaftdia.ShaftlengthRotationspeedPKCat. No.R 1300R 1302R 1303mm mm mm rpm808350 200010010350 1000428350 20001119.197 0019.197 0039.197 0073Centrifugal stirrers, stainless steelIKA3TypeStirrerdia.Shaftdia.ShaftlengthRotationspeedPKCat. No.R 1352R 1355mm mm mm rpm60/158350 2000100/248550 800119.197 0119.197 0134Paddle stirrers with 6 holes, stainless steelIKA4TypeStirrerdia.Shaftdia.ShaftlengthRotationspeedPKCat. No.R 1375R 1376R 2311mm mm mm rpm708550 80015010550 80015013800 6001119.197 0199.197 0209.197 0465Anchor stirrers, stainless steelIKA5TypeStirrerdia.Shaftdia.ShaftlengthRotationspeedPKCat. No.R 1330R 1331R 1333mm mm mm rpm458350 1000908350 100015010550 8001119.197 0339.197 0349.197 036E & OE.www.wenk-labtec.com425

4. Stirring, Shaking, MixingOverhead stirrers/StirrersGENERAL CATALOGUE EDITION 1712Impellers for Overhead StirrersPowerful StirringHeidolphShaft diameter: 8mm39.816 54049.816 548Blade and Half-Moon Impeller- These impellers are recommended for applications which require an average speed- For mixing products with average viscosity- Models BR 12, BR 14 and HR 18 come with collapsible blade for narrow neck vessels59.816 5509.816 55769.816 5549.816 558Propeller-Type Impeller- These impellers are recommended for applications which require an average or high speed- For mixing products with medium or high viscosity- Excellent mixing properties for homogenisation and suspensions- These models create an axial flowRadial Flow Impeller- These impellers are recommended for applications which require an average speed- For mixing products with average viscosity up to

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Stirrers1Maxi Propeller Stirrer Shafts, PTFEPTFE-jacketed stainless steel shaft, propeller completely made of PTFE with three 45°angled blades. Universal chemical resistance since the product is only exposed to PTFE.The product is sucked bottom-up, very good axial flow with low local shear force.BOLA1LengthShaftdia.To fitchuckdia.Paddledia.mm mm mm mm60080010001010168.08.014.0140140200PK111Cat. No.9.197 1949.197 1959.197 1962U-Shaped Stirrer Shafts, PTFEPTFE-jacketed stainless steel shaft, u-shaped stirrer blade completely made of PTFE.Universal chemical resistance since the product is only exposed to PTFE.Strong, tangential flow with high shear rate in the margin area, little sediments on the wall of the vessel.Ideal for mixing viscous liquids.BOLA2LengthShaftdia.To fitchuckdia.Paddledia.mm mm mm mm3506003506008810106.56.58.08.06010080100PK1111Cat. No.9.197 1449.197 1459.197 1469.197 147Additional Stirrer Blades for Bola Stirrer Shafts, PTFEUseful extension to the existing range of Bola stirrer shafts. The additional blades can optionally be fixed in your preferredposition on every stirrer shaft with diameter 8mm or 10mm (a flat spanner is included). The stirrer blades are entirelymade of PTFE, the mounting devices are made of a special PTFE-compound. A high chemical and thermical (-200°C to +250°C) resistance is assured.This "building block system” allows the user to define a stirrer of their own special requirements.BOLADescriptionPropeller-three-bladedPropeller-three-bladedMaxi Propeller-three-bladedMaxi Propeller-three-bladedImpeller-three-bladedImpeller-three-bladedAnchorAnchorAnchorAnchorBladeBladeBladeSolo stirrer shaftSolo stirrer shaftSolo stirrer shaftSolo stirrer shaftShaftdia.Length Paddledia.mm mm mm875107510140162001010010150860810010801010088010110161408 35010 50010 60010 800PK11111111111111111Cat. No.6.233 2776.231 4917.651 1496.227 7709.197 1706.401 5479.197 1719.197 1726.233 2549.197 1739.197 1746.229 2759.197 1756.240 6157.654 8706.228 1876.241 09734567345676.233 2777.651 1499.197 1709.197 1719.197 1748Overhead stirrer rotors, centrifugal paddle, PTFEWith PTFE-coated, stainless steel shaft.BOLA8LengthShaftdia.To fitchuckdia.Paddledia.mm mm mm mm35045045068104.76.58.0509090PK111Cat. No.9.197 1769.197 1779.197 179E & OE.www.wenk-labtec.com427

4. Stirring, Shaking, MixingOverhead stirrers/StirrersGENERAL CATALOGUE EDITION 1711Stirrer rotor, PP propellerWith four-bladed, PP propeller. PE-coated, metal stirrer shaft.BRANDDia. Length RotorPK Cat. No.dia.mm mm mm6 380 45 1 9.197 10122Paddles, 2 blade propellerFor stirrer rotors with M6 thread. Stainless steel 1.4301.Type Blade PK Cat. No.2 blades, M62 blades, M62 blades, M62 blades, 90° offset, M62 blades, 90° offset, M62 blades, 90° offset, M6mm507010050701001111119.156 1649.156 1659.156 1669.156 1679.156 1689.156 16933Paddles, 3 blade propellerStainless steel 1.4301. With screwthread fitting as outlined below.Type Blade PK Cat. No.3 blades, M6 thread3 blades, M6 thread3 blades, M6 thread3 blades, M6 thread3 blades, M10 threadmm5070100140140111119.156 1709.156 1719.156 1729.156 1739.156 14844Paddles, 4 blade propellerStainless steel 1.4301. With screwthread shaft connection as outlined below.Description Blade PK Cat. No.4 blades, M6 thread4 blades, M6 thread4 blades, M6 thread4 blades, M6 thread4 blades, M10 thread4 blades, 90° offset, M6 thread4 blades, 90° offset, M6 thread4 blades, 90° offset, M6 threadmm50701001501505070100111111119.156 1749.156 1759.156 1769.156 1779.156 1429.156 1789.156 1799.156 18055Paddles, flask with holesStainless steel. With screwthread fitting as outlined below.Description Blade PK Cat. No.10 hole, M6 thread14 hole, M6 threadmm70 x 10070 x 150119.156 1879.156 188428E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Stirrers1 Impellers inoJET ®The all rounder for thick and thinWorldwide the only impeller capable of completely mixing larger quantities of high-viscosity liquids and gels.Heidolph1Principle of Functionality:The worldwide patented inoJET ® Mixing System is the result of the so-called cone-principle. Turbulent flows are createdat the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium andresult in the new dynamic mixing motion.Your advantages:- One system for literally all mixing tasks for low to high viscosity media- Patented cone-principle creates even at low speeds a turbulent flow which is unique to the inoJET ®- Even with high-viscosity media and gels which naturally do not mix by using common impellers you will observean immediate flow through the entire beaker- This technology allows for de-gassing of gels while preventing air intake and foaming- Reduce your process times significantly while performing the best mixing result everType Material Dia. For neckdia.Length Rotationspeedmm mm mm rpminoJET ® V4A60 80 to 150500 200 to 800inoJET ® V4A80 115 to 200500 200 to 700inoJET ® POM80 115 to 200500 200 to 700inoJET ® V4A120 170 to 300500 120 to 500inoJET ® POM120 170 to 300500 120 to 500Other versions available.PK11111Cat. No.9.816 5959.816 5969.816 5979.816 5989.816 5992Paddles, adjustable, for narrow mouth flasksStainless steel. With screwthread fitting as outlined below.2Type Blade PK Cat. No.1 blade, M6 thread2 blade, M6 thread2 blade, M6 thread2 blade, M6 threadmm60609010011119.156 1819.156 1829.156 1839.156 1843Paddles, flask, centrifugalStainless steel. With screwthread fitting as outlined below.3Type Blade PK Cat. No.3 hole, M6 thread6 hole, M6 threadmm70 x 7070 x 70119.156 1859.156 186E & OE.www.wenk-labtec.com429

4. Stirring, Shaking, MixingOverhead stirrers/StirrersGENERAL CATALOGUE EDITION 1711Rods for stirrer rotor shafts, M6 and M10 screwthread endDescription Dia. Length PK Cat. No.mm mmRod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 6Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10Rod, screwthread M 10666666666101010101212121212121503003504004505006007008005507501000130055075080010001300150011111111111111111119.156 1009.156 1019.156 1029.156 1039.156 1049.156 1059.156 1069.156 1079.156 1089.156 1299.156 1309.156 1319.156 1329.156 1339.156 1349.156 1359.156 1369.156 1379.156 138Stirrer glands (stirrer guides), with NSMade of DURAN ® tubing. Other materials used: PTFE (bearing), silicone (gasket) and Stirrer guides, GL male thread. Cone size 29/32.Guide bore 10mm i.d.LenzType PK Cat. No.With precision-formed, cylindrical sleeveWith GL male thread119.197 3519.197 35523239.197 3519.197 35544KPG stirrer bearings, DURAN ®Interchangeable. Bearing surface ground, polished.With or without standard ground cone NS 29/32.DURAN GroupType Cone Dia. Height PK Cat. No.HA 10HB 10HB 16HQ 10HT 10HT 16NS mm mmno1065no1075no1690yes1075yes1065yes16851111119.197 2519.197 2529.197 2579.197 2539.197 2569.197 258430E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingOverhead stirrers/Magnetic stirrer heads1Stirrer Bearings, PTFEThe sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks,the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket madeof PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft.This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stainless steel,glass and BOLA Stirrer Shafts.NEW!BOLA1ConeFor diam.stirring rodOveralllengthNeck thread PK Cat. No.NS mm mm GL29/3229/3229/3268107274721825251116.087 5386.076 5326.088 0582Glass Stirrer Bearings, PTFECombination of a borosilicate glass piece with ground joint, an interior PTFE shaft guidewith integrated special gasket and a GL screw cap made of PPS. The special gasket madeof PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft.This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stirrer shaftsmade of stainless steel, glass and for BOLA Stirrer Shafts.NEW!BOLA2ConeFor diam.stirring rodOveralllengthNeck thread PK Cat. No.NS mm mm GL29/32 8902529/32 109025116.510 0326.088 0593Magnetic Stirrer Heads P-MRKIdeal stirrer head for PTFE-jacketed stirrer shafts from BOLA.Consisting of capsuled drive shaft (stainless steel) with ball bearings, rotor and lower bearingmade of PTFE/PEEK and a hollow shaft made of borosilicate glass.Requires little space due to compact construction.No leakage or memory effects due to non-porous, welded rotor.Compression fittings for safe fixing of stirrer shaft and optimum power transmission.Joint-Cone with nut (Safe-Lab) for easy locking and unlocking of the ground joint.Square size 6mm for accepting an agitator or a stirrer coupling. Insertion length of shaft 95mm.Drive shaft outside diameter 50mm.- gastight stirrer head for perfect vacuum- stirrer shaft's height adjustable, approx. 40mm- also suitable for shortened stirrer shafts- powerful transmission of up to 90Ncm- excellent chemical resistance- all products which are exposed to the medium do not contain any metals- no grease required/save to run dry- high speed of up to max. 1.500rpm- drive shaft fixed for your safety- high durability- easy disassembly of all parts for cleaningNEW!BOLA3Joint sizeFor diam.stirring rodHeight PK Cat. No.NS mm mm29/3229/3245/40810101451451451119.197 2059.197 2069.197 2074 5 6 7Magnetic stirrer headsMagnetic stirrer heads are available on request.BOLA4 5 6 7E & OE.www.wenk-labtec.com431

4. Stirring, Shaking, MixingShakersGENERAL CATALOGUE EDITION 17Shakers overviewMovementorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalorbitalvibratingvibratingvibratingvibratingvibratingvibratingvibratingvibratingvibratingreciprocatingreciprocatingreciprocatingreciprocatingreciprocatingreciprocatingreciprocatingreciprocatingreciprocatingreciprocating, 360° rotation, vibrationreciprocating, 360° rotation, vibrationorbitalorbitalorbitalwavewavewavewavewave, 3°wave, 3°overheadoverheadrockingrockingrocking and rollingrocking and rollingrocking and rollingrocking and rollingrocking, 3°rocking, 3°rocking, 7°rocking, 7°rocking, 7°3D / fixed 20°3D / 3-12°3D / 3-12°3D / fixed 5°3D / fixed 7°3D / fixed 7°3D 7° and rotationarc, 7.2°Load capacity(kg)000000.10.20.40.50.50.50.512222337.57.581015151515.915.9202022.722.73030001.21.52222557.57.5810101515150.50.82510551010151502055555515150.53100.83100.80.5513Rotationspeed (rpm)0-2850150-1000202-40750-300028000-1100500-25000-30000-3000200-25002500250-12500-2200250-125080-80080-80030-30050-30010-50020-50020-50030-3000-30020-30020-30040-40015-50010-50010-50040-40015-50020-25020-2500-25000-2500100-1450150-2000150-1350150-1350150-1350150-2500150-135030-25010-30020-30020-30020-40025-2500-30020-30020-30010 - 10010-10020-30030-50020-4002-502-502,5-502,5-502-502-506-801-202-502-5033335-605-602-502-507,5-305-705-70205-705-702010-303-605-308 - 800 osc.Orbit(mm)32--24.5344.54.54.24.21.541.5441610101010163030301919202025.425.4323255331,5331,51,5322020202020303030--201020--------16161616-----------22Variable speedrangeYesYesNoYesYesNoYesYesYesYesYesNoYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesYesNoNoYesYesYesYesYesYesYesNoYesYesNoYesYesYesYesVariableamplitudeNoNoYesYesNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoYesYesNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoYesYesNoNoNoYesNoIP classIP225-40ºC / IP 204-60ºC / IP 314-60ºC / IP 315-40ºC / IP 20IP 40IP 21IP 21IP 21IP 215-40ºC / IP 315-40ºC / IP 31IP 31IP 21IP 31IP 21IP 215-40ºC / IP 315-40ºC / IP 20IP 21IP 21IP 205-40ºC / IP 31IP 21IP 20IP 20IP 20IP 20IP 30IP 30IP 20IP 20IP 20IP 20IP 22IP 22IP 20IP 30IP 30IP 30IP 30IP 30IP 40IP 40IP 21IP 21IP 20IP 205-40ºC / IP 31IP 21IP 20IP 204-40ºC / IP 204-40ºC / IP 20IP 30IP 40IP 20IP 40IP 40IP 20IP 20IP 20IP 20IP 20IP 20IP 40IP 404-60ºC / IP 204-60ºC / IP 204-60ºC / IP 204-60ºC / IP 20IP 20IP 204-40ºC / IP 205-40ºC / IP 305-40ºC / IP 30IP225-40ºC / IP 305-40ºC / IP 30IP224-40ºC / IP 20IP224-40ºC / IP 20IP 31432E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakersShakers overviewHeating functionNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoYesYesNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoCooling functionNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoYesNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoIncubating functionNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoYesYesNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoNoProductVortex Mixer VX-200Micro plate shaker PMS-1000Rotator SB2Rotator SB3Mini-Vortex mixer PV-1Shaker lab dancerMicrotiter shaker MTS 2/4 digitalVortex Genius 3Small-sized shaker MS 3 digitalSmall-sized shaker MS 3 basicVortex mixer SA8Vortex mixer SA7Microtiter shaker SSM5Orbitalshaker Vibrax VXR basicMicrotiter shaker SSL5Orbital shaker KS 130 basicOrbital shaker KS 130 controlMini orbital shaker SSM1Orbital shaking platform POS-300Laboratory shaker KS 260 controlOrbital shaker KS 260 basicShaker model 3005Orbital shaker SSL1Orbital shaker KS 501 digitalShaker model 3015Shaker model 3017Max Q 2000 analogMax Q 2000 digitalIncubation shaker KS 4000i controlIncubation shaker KS 4000ic controlMax Q 3000 analogMax Q 3000 digitalShaker model 3019Shaker model 3020Test tubes shaker Reax topTest tubes shaker Reax controlVibration shaker 3023Shaker Multi ReaxMicrotiter plate shaker Titramax 100Microtiter plate shaker Titramax 101Shaker Vibramax 100Shaker Vibramax 110Microtiter plates shaker Titramax 1000Shaker Promax 1020Horizontal shaker HS 260 controlHorizontal shaker HS 260 basicShaker model 3006Shaker Promax 2020Reciprocating shaker SSL2Horizontal shaker IKA HS 501 digitalShaker model 3016Shaker model 3018Multi function rotator PTR-30Multi function rotator PTR-60Shaker Rotamax 120Shaker Unimax 1010Shaker Unimax 2010Shaker Polymax 1040 5°Shaker Polymax 1040 10°Shaker Polymax 2040 5°Shaker Polymax 2040 10°Shaker model 3011Shaker model 3012Test tube rotator 3025Shaker model 3040Shaker Duomax 1030 5°Shaker Duomax 1030 10°Roller mixer SRT6Roller mixer SRT9Roller mixer SRT6DRoller mixer SRT9DShaker model 3014Shaker model 3013Mini platform rocker PMR-30Mini-shaker SSM4See-saw shaker SSL4Shaker GyroMini 3-DMini-shaker SSM3Gyratory shaker SSL3Shaker Enduro MiniMix 3-DMini 3D platform mixer PS-3DGyroTwister GX-1000 3-DMulti function rotator 3D mixer PS-M3DFlask shaker SF1SupplierLabnetGrantStuartStuartGrantIKAIKAIKAIKAIKAStuartStuartStuartIKAStuartIKAIKAStuartGrantIKAIKAGFLStuartIKAGFLGFLThermo Sci.Thermo Sci.IKAIKAThermo Sci.Thermo Sci.GFLGFLHeidolphHeidolphGFLHeidolphHeidolphHeidolphHeidolphHeidolphHeidolphHeidolphIKAIKAGFLHeidolphStuartIKAGFLGFLGrantGrantHeidolphHeidolphHeidolphHeidolphHeidolphHeidolphHeidolphGFLGFLGFLGFLHeidolphHeidolphStuartStuartStuartStuartGFLGFLGrantStuartStuartLabnetStuartStuartLabnetGrantLabnetGrantStuartCat.No.9.595 3209.721 0259.645 3229.645 3239.721 0009.729 9369.838 1959.729 9509.729 9399.729 9389.720 9699.950 4339.728 8509.729 9009.728 8539.838 1509.838 1559.728 8309.721 0209.838 1759.838 0749.837 9059.728 8409.838 0409.837 9159.837 9174.011 0454.011 0579.837 8909.837 8914.011 0484.011 0599.837 9199.837 9209.730 0409.730 0429.837 9219.839 8109.839 8319.839 8329.839 8339.839 8359.839 8309.839 8539.838 1859.838 0639.837 9069.839 8029.728 8419.838 0419.837 9169.837 9189.721 0279.721 0309.839 8379.839 8519.839 8019.839 8579.839 8599.839 8049.839 8009.837 9119.837 9129.837 9259.837 9319.839 8559.839 8569.728 8109.728 8129.728 8119.728 8139.837 9149.837 9139.721 0119.728 8219.728 8019.595 3309.728 8209.728 8009.595 3319.721 0146.227 0939.721 0179.950 372E & OE.www.wenk-labtec.com433

4. Stirring, Shaking, MixingShakers and mixers/VortexerGENERAL CATALOGUE EDITION 1711Globe Stirrer Couplings, POMNEW!Made of POM, a plastic material with a good mechanical strength, powerful transmissionBOLAof up to 300Ncm, suitable for a speed of up to 1.200 rounds per minute, maximummisalignment of axes 10mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft,suitable for glass, metal or BOLA stirrer shafts. Opening for stirrer shaft diameter 8 + 10mm. Upper diameter 10mm.- very low centrifugal forces due to low weight- suitable for both left and right-handed rotation (except for GL 10 thread: no left-handed rotation possible)- no resonance- simple assembly by means of screw joints with clamp rings- pivot (length 90mm) can be shortened by the userOverallPK Cat. No.lengthmm190 1 7.632 67622Vortex mixer PV-1With low profile and small footprint for gentle mixing to vigorous re-suspensionof cell or chemical pellets.- variable speed: 750rpm to 3000rpm- continuous or touch operation- for tubes up to 20mm diameterGrantSpecificationsSpeed range:250 bis 3000rpmDimensions (WxDxH):82 x 145 x 75mmTemperature range: 4 to 45°CType PK Cat. No.PV-1 1 9.721 00033Vortex Genie 2-MixerFor shaking and mixing of small volumes.Stable housing with noise reducing feet. Continous mixing control.Switch for constant or intermediate shaking.Supplied complete with shaking attachment for one 25ml test tube, 75mm disc for beakers, erlenmeyer flasks etc.Specifications:Speed range: 600 - 2700 min -1Dimensions (WxDxH): 122 x 165 x 165mmWeight:4.0kgSupply requirements:220V 50 Hz, 250mA.Description PK Cat. No.Vortex Genie 2-Mixer 1 9.730 06044Vortex Mixer Select VortexMix and vortex any size tube- Gentle mixing or vigorous vortexing. Continuously variable speed makes the SelectVortex useful for a variety of applications, from gentle mixing to resuspending pellets.- ease of operation. "Touch" or continuous mode.- mix a variety of tubes and platesSBPSpecificationsSpeed range 120VSpeed range 230VOperating modesDimensions (WxDxH)Weight0 to 3400rpm0 to 2850rpmTouch or continuous14 x 16 x 13cm2.2kgType PK Cat. No.434Vortex Mixer 1 9.595 320E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 17Accessories for Vortex Mixer Select Vortex4. Stirring, Shaking, MixingShakers and mixers/VortexerSBPType PK Cat. No.Head attachment for 24 x 1.5/2.0ml tubes, 24 x 0.5ml and 32 x 0.2ml tubesHead attachment for 1 microplate or 64 x 0.2ml tubes or 8 x 0.2ml tube stripsHead attachment for 8 x 15ml and 8 x 12/13mm diameter tubesHead attachment for 6 x 50ml tubesHead attachment for 12 x 1.5/2.0ml tubes, held horizontallyHead attachment for 4 x 15ml tubes, held horizontallyHead attachment for 2 x 50ml tubes, held horizontally11111119.595 3219.595 3229.595 3239.595 3249.595 3259.595 3269.595 3272Mixers, vortex, SA7, SA8- Low profile, ergonomic design- Robust, die-cast housing avoids unnecessary movement during use- Powerful vortex mixing action, ideal for a range of tubes- Two models available- Economic fixed speed model SA7- Variable speed model SA8 with choice between intermittent or continuous operation- Integral retort rod fixing- Range of accessory heads availableWith BioCote, silver-based, antimicrobial protection.Stuart19.950 433Specifications SA 7/SA 8Speed:2500rpm/200 to 2500rpmOrbit:4.2mmContinuous mode:No/YesAccessory heads:No/YesMaximum load:0.5kgOverall dimension:78 x 135 x 215mmNet weight:3.2kgElectrical supply:90-240 V, 20W2Type PK Cat. No.SA7SA8Accessory head for micro plates and micro tubesSupport rod 300 x 12.5mm11119.950 4339.720 9699.720 9709.720 97113Test tube shaker, lab dancerInexpensive, compact, attractively designed, test tube vortex shaker.Designed for mixing small test samples by touch function.- Small, compact and reliable- For small containers up to 30mm in diameter, e.g. test tubes, centrifuge tubes, Eppendorf tubes- Fixed speed (2800rpm)- Excellent mixing- Top of housing and the test tube accessories are made from chemically inert plastic.The bottom section is a coated, zinc die-casting.- Includes lightweight 12V mains adapterIKA3Specifications:Mixing:Orbit:Capacity, volume:Motor rating input/output:Speed:Dimensions (Dia. x H):Weight:Material housing:Material attachment:Material base:Enclosure according to DIN EN 60529:Supply requirements:Tested to DIN EN IEC 61010-1.orbital/vortex4.5mm1 tube, max. 50ml1.2/0.8W2800rpm (fixed)100 x 70mm550gPPTPUZinc, coatedIP40100-240V 50/60 HzType PK Cat. No.lab dancer EU/CHlab dancer UKE & OE.www.wenk-labtec.com119.729 9364.008 065435

4. Stirring, Shaking, MixingShakers and mixers/VortexerGENERAL CATALOGUE EDITION 1711Shaker Vortex 1New test tube shaker with touch function. Specially for mixing small sample volumeswith touch function. Infinitely adjustable speed rangeSpecificationsType of movement:orbital/vortexOrbital diameter:4.5mmMax. shaken quantity (1 test tube)100mlMotor rating input/output:1.2/0.8WSpeed range:1000 to 2800rpmDimensions (W x H x D):95 x 110 x 70mmWeight:0.55kgEnclosure according to DIN EN 60529: IP 40NEW!IKAType PK Cat. No.VORTEX 1 1 9.729 931239.729 932Shaker VORTEX 4 basic/digitalCompact, universal small shaker suitable for shaking tasks with small vessels andmicrotiter platesSpecificationsType of movement:orbital/vortexOrbital diameter:4.5mmMax. permitted shaking weight (incl. attachment)0.5kgMotor rating input/output: 10/8WSpeed range:0 to 3000rpmTimer:only for VORTEX 4 digital (1 sec. - 999 min)Dimensions (W x H x D):176 x 190 x 63mmWeight:3.0kgEnclosure according to DIN EN 60529: IP 21NEW!IKA9.729 933Type PK Cat. No.VORTEX 4 basicVORTEX 4 digital119.729 9329.729 9332344Shaker Vortex Genius 3Vortex shaker suitable for intermittent operation (touch function), activated by pressingshaker attachment, or for continuous operation.- Wide speed range, infinitely adjustable- Versatile, due to 3 accessory interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtitre plates,250ml Erlenmeyer flasks etc.), please order separately- Attachments securely click onto shaker in any position- Strap clamp (VG3.36) ensures easy holding of round/Erlenmeyer flasks- Sturdy, die cast zinc casing- Stable at high speeds due to special feet (silicone base with ultra high vibration damping)- Eccentric drive with ball bearings- Self-ventilated motor allows continuous operation with minimal warm-up of the housingIKASpecificationsType of movement:orbital/vortexOrbital diameter:4mmMotor rating input/output: 58/10WSpeed range:500 to 2500rpmSpeed indication: scale 0 to 6Dimensions (W x H x D):127 x 149 x 136mmWeight:4.5kgProtection class acc. to DIN EN 60529: IP 21Supply requirements:230V 50/60 HzTested to DIN EN IEC 61010-1.Type PK Cat. No.436VORTEX Genius 3VORTEX Genius 3 UKE & OE.www.wenk-labtec.com119.729 9504.008 061

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Vortexer-Orbital shakersAccessories for shaker Vortex Genius 3Type Description PK Cat. No.IKAVG 3.1VG 3.2VG 3.3VG 3.31VG 3.32VG 3.33VG 3.34VG 3.35VG 3.36VG 3.37*included in deliveryStandard attachment, for test tubes, small vessels*One-hand attachment 88mm, rubber inletStandard tray 150mm, rubber inletInsert for 54 Eppendorf tubesInsert for 18 x 10mm diameter test tubesInsert for 12 x 12mm diameter test tubesInsert for 8 x 16mm diameter test tubesInsert for 8 x 20mm diameter test tubesAttachment for Erlenmeyer and round vessels 100 to 250mlHolder for 1 standard microtitre plate11111111119.729 9549.729 9559.729 9519.729 9569.729 9579.729 9589.729 9599.729 9529.729 9539.729 9601231239.729 9519.729 9529.729 9534Test tube shakers Reax top/controlVibratingIdeal for mixing samples in Eppendorf tubes, vials and similar vessels of different diameters at extremelyhigh speed rates. The ridged mixing orbit yields consistent results and is ideal for product dissolution.Heidolph4Reax top - The standard model- The strong 5mm vibration orbit accomplishes best results even with high viscosity media or solids to give smooth andeven dispersion quickly- Switch to continuous mode, the unit performs a permanent vibration motion- Switch to automatic mode, the unit will start once a vessel is pressed to the plate and will stop automatically oncethis pressure is released- Fast and dependable mixing results due to high vibration frequency that rates up to 2500rpm- Features an analog dial speed control, no settings of specified rpm numbersDimensions (W x H x D) [mm]: 134 x 105 x 172Voltage/frequency: 230 V/50 Hz (others also available)Reax control - The accurate modelIncludes all Reax top features, plus:- Features analog dial speed control with accurate rpm numbers setting- Improve your results by the electronic speed control that provides constant rpm output even at very low speed andunder changing loadsType PK Cat. No.Reax top, incl. attachmentReax top, incl. attachment UKReax control, incl. attachmentAttachment, large, for tubes or flasks up to 50 ml11119.730 0409.730 0419.730 0429.730 019E & OE.www.wenk-labtec.com437

4. Stirring, Shaking, MixingShakers and mixers/Orbital shakersGENERAL CATALOGUE EDITION 1711Test tube shakers Multi ReaxThe all purpose - VibratingShipment includes as standard:- Attachment for 26 vessels with diameters from 10mm to 16mm- Attachment for 12 vessels with diameters from 16mm to 32mm- Your digital process timer allows for unattended operation and can be set from 1 to 999 minutes.After time expires this model sends an acoustic alarm and operation is stopped- Set and continuously adjust the variable speeds from 150rpm to 2000rpm on the digital display- The 3mm vibration orbit accomplishes excellent results especially in large vessels.The Multi Reax allows for ridged to smooth dispersion of viscous media and solidsDimensions (wxhxd) (mm): 270 x 410 x 172Supply voltage: 230/240V/50/60 Hz or 115V/50/60 HzHeidolphDescription PK Cat. No.Multi ReaxCarousel for 26 test tubes (10 to 16 mm dia.)Carousel for 12 test tubes (16 to 32 mm dia.)1119.839 8109.739 2589.739 259239.729 938Shaker MS3 basic/digitalCompact, universal small shaker suitable for shaking tasks with all small vessels andmicrotitre plates.- Continuous or touch operation (with standard attachment)- Two operating modes available:Mode A (safe mode with attachment detection)the maximum speed of 3000rpm is only attained with the standard attachment in touch mode.When using other attachments the speed is limited to 1300rpm.Mode B (without attachment detection)a speed of 3000rpm is possible with all attachments.- Stable in all speed ranges- Sturdy, zinc, die-cast casingMS 3 digital additionally with countdown function timer (1sec to 999min).Items supplied with MS3 basic + digital:Standard attachment, universal attachment, one-hand insertAdditional items supplied with MS3 digital:Microtitre plate attachment, test tube insert with 6 holes for 12mm diameter tubesIKA9.729 939Specifications:Type of movement:orbitalOrbit:4.5mmMax. permitted shaking weight (incl. attachment):0.5kgMotor rating input/output: 10/8WSpeed display:ScaleSpeed range:0 to 3000rpmDimensions (WxDxH):148 x 205 x 63mmWeight:2.9kgProtection class acc. to DIN EN 60529IP21Supply requirements:100-240V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.MS 3 basic EU/UK/CH/USMS 3 digital EU/UK/CH/USContinuous mode and touch operationTimer and continous mode, touch operation119.729 9389.729 93923438E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Orbital shakersAccessories for Shaker MS 3Type Description PK Cat. No.NEW!IKAMS 3.1MS 3.3MS 3.4MS 3.5MS 1.21MS 1.31MS 1.32MS 1.33MS 1.34Standard attachmentUniversal attachmentMicrotitre plate attachmentPCR attachmentOne-hand insertTest tube insert, with 14 holes for tubes diameter 10mmTest tube insert, with 6 holes for tubes diameter 12mmTest tube insert, with 4 holes for tubes diameter 16mmTest tube insert, plain, for user to drill1111111119.729 9429.729 9449.729 9436.237 4699.729 9459.729 9469.729 9479.729 9489.729 94912345123459.729 9429.729 9449.729 9436.237 4699.729 9456Vibrating shaker, VXR basic Vibrax ®Optoelectronically controlled small shaker with a very wide speed range.- Suitable for continuous operation- New design and improved drive system- Circular shaking motions- Slow speeds are well maintained- Attachments are interchangeablePlease order the required shaker attachment separately.IKA6Specifications:Shaking motion:Orbit:Motor rating input/output:Speed range:Dimensions (WxDxH):Weight (without attachment):Max. loading:Protection class DIN EN 60529:Supply requirements:Tested to DIN EN IEC 61010-1.Orbital4mm35/13.2W0 to 2200rpm157 x 247 x 130mm6.1kg2kgIP21230V 50/60HzType PK Cat. No.VXR basic Vibrax ®VXR basic Vibrax ® UKOptional accessories: Attachements: VX 1, VX 2, VX 2E, VX 7, VX 8, VX 11, VX 11.1, VX11.2, VX 11.3, VX 11.4119.729 9006.202 4677Vibrating shaker, Vibrax ® VXR basic, accessory attachmentsVX 1 one-hand attachmentFor shaking single, non-fixed vessels of 1ml to 250ml.VX 2 test tube attachmentFor up to 36 test tubes or centrifugal tubes with a diameter of 16 mm.VX 2E "Eppendorf" attachmentFor intensive shaking of up to 64 ”Eppendorf“ tubes (1.5ml).VX 7 bowl attachmentFor careful shaking of culture bottles, Petri dishes, etc.VX 8 Universal attachmentFor rapid and secure clamping, e.g. 2 Erlenmeyer flasks up to 500ml.IKA89.729 901Type Width Depth Height PK Cat. No.mm mm mmVX 1VX 2VX 2EVX 7VX 813014021041026513514521021013640115654060111119.729 9019.729 9029.729 9149.729 9079.729 90878999.729 902E & OE.www.wenk-labtec.com9.729 914439

4. Stirring, Shaking, MixingShakers and mixers/Orbital shakersGENERAL CATALOGUE EDITION 171VX 11 Basic holderAttachment for test tube inserts.VX 11.1 Test tube insertAttachment for Eppendorf tubes or test tube inserts.VX 11.2/ VX 11.3/VX 11.4 Test tube insertsFor test tubes.26.231 284TypeVX 11VX 11.1VX 11.2VX 11.3VX 11.4No.ofholes70413218Diameterof holesmm10121620PK11111Cat. No.6.231 2846.232 8136.231 2856.228 2469.729 915129.729 91533 4 5Orbital shaker, KS 130 basic/ PackageSmall, quiet running, low-friction shaker with effective orbital movement and a maximumloading of 2kg.- Electronic speed control and timer adjustment- LED scale bar speed and time display- Large selection of attachments for different container types and sizes- Attachments not included - Please order separately.KS 130 control available on request.NEW!IKA45SpecificationsShaking movement:orbitalOrbit:4mmMax. capacity including attachment:2kgMotor rating input/output: 45 /10WSpeed range:80 to 800rpmSpeed indication:LED scale barTimer:5 to 50 min/continuousDimensions (WxDxH):270 x 316 x 98mmWeight:8.8kgHousing IP rating to DIN EN 60529:IP21Power source:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.KS 130 basicKS 130 basic Package (incl. adhesive matSTICKMAX, AS 130.3 Dish attachment)119.838 1509.838 151440E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Orbital shakersAccessories for orbital shaker KS 130AS 130.1 Universal attachmentAble to hold most types of container using adjustable tension rollersAS 130.2 Fixing clip platformFor shaking round bottom vessels, volumetric and Erlenmeyer flasks. Supplied without clipsAS 130.3 Petri dish attachmentFor gentle mixing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP).AS 130.4 Test tube holderFor intensive vibrating of small tubes, test tubes, cuvettes, centrifuge tubes.IKAType Description Dimensions(W x D x H)mmAS 130.1 Separating funnel attachment325 x 234 x 88AS 130.2 Fixing clip platform*230 x 230 x 24AS 130.3 Petri dish attachment420 x 270 x 32AS 130.4 Test tube holders220 x 230 x 95labworldsoft ® Software for control and data collection for KS 130 control* Clips AS 2.1 (9.838 091), AS 2.2 (9.838 092), AS 2. 3 (9.838 093), AS 2.4 (9.838 094), AS 2.5 (9.838 095) please order separately.PK11111Cat. No.9.838 1609.838 1619.838 1629.838 1639.910 320123412349.838 1609.838 1619.838 1629.838 1636Orbital shaker, KS 260 basic/ PackageCompact, low-level, platform shaker with highly effective, orbital motion, maximumcapacity 7.5kg.- Electronic speed control and timer adjustment- LED indicator display- Large selection of attachments for different container types and sizes- Attachments not included - Please order separately.NEW!IKA59.838 0746SpecificationsShaking motion:OrbitalOrbit:10mmMax. loading (incl. attachment):7.5kgMotor rating input/output: 45/10WSpeed range:20 to 500rpmSpeed indication:LED scaleTimer:5 to 50 min/continuousDimensions (WxDxH):360 x 420 x 98mmWeight:8.5kgHousing IP rating to DIN EN 60529:IP21Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.KS 260 basicKS 260 basic Package (incl. 2 x STICKMAX, AS 260.3 Dish attachment)119.838 0749.838 0755E & OE.www.wenk-labtec.com441

4. Stirring, Shaking, MixingShakers and mixers/Orbital shakersGENERAL CATALOGUE EDITION 17129.838 1752Orbital shaker, KS260 control/ PackageCompact, low-level, platform shaker with highly effective, orbital motion, maximumcapacity 7.5kg.- Electronic speed control and timer adjustment- Separate digital speed and timer displays with operating mode indication- Timer: 0 to 9 h 59 min or continuous operation- Controlled stop-point positioning function (enables use in automated robotic sampling routines)- All functions can be controlled and documented using labworldsoft ® software- Special variant with reverse rotation function available on request- Large selection of attachments enable use with a wide variety of vessel shapes and sizes- Attachments are not included - Please order separatelyNEW!IKASpecificationsShaking motion:orbitalOrbit:10mmMax. loading (incl. attachment):7.5kgMotor rating input/output: 45/10WSpeed range:10 to 500rpmSpeed indication:digitalTimer:1 to 599 min./continuousDimensions (WxDxH):360 x 420 x 98mmWeight:8.8kgHousing IP rating to DIN EN 60529:IP21Interface:RS232/analogueSupply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.KS260 controlKS 260 control Package(incl. 2 x STICKMAX, AS 260.3 Dish attachment)119.838 1759.838 176133Reciprocating shaker, HS260 basicCompact, low-level, platform shaker with highly effective, reciprocating motion,maximum capacity 7.5kg.- Electronic speed control and timer adjustment- LED scale bar indicator display- Large selection of attachments for different container types and sizes- Attachments are not included - Please order separately.IKASpecificationsShaking motion:Stroke:Max. loading incl. attachment:Motor rating input/output:Speed range:Speed indication:Timer:Dimensions (WxDxH):Weight:Housing IP rating to DIN EN 60529:Supply requirement:Tested to DIN EN IEC 61010-1.reciprocating20mm7.5kg45/10 W20 to 300rpmLED scale bar5 to 50 min/continuous360 x 420 x 100mm8.5kgIP21230V 50/60HzType PK Cat. No.HS260 basic 1 9.838 063442E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Orbital shakers1Horizontal shaker, HS 260 controlCompact, low-level, platform shaker with highly effective, reciprocating motion,maximum capacity 7.5kg.- Electronic speed control and timer adjustment- Separate digital speed and timer displays with operating mode indication- Timer: 0 to 9 h 59 min or continuous operation- Controlled stop-point positioning function (enables use in automated robotic sampling routines)- All functions can be controlled and documented using labworldsoft ® software- Large selection of attachments enable use with a wide variety of vessel shapes and sizes- Attachments are not included - Please order separatelyIKA1SpecificationsShaking motion:reciprocatingStroke:20 mmMax. loading incl. attachment:7.5 kgMotor rating input/output:45W/10 WSpeed range:10 to 300 rpmSpeed indication:digitalTime switch clock:1 h 599 min/continuousDimensions (WxDxH):360 x 420 x 100 mmWeight:8.8 kgHousing IP rating to DIN EN 60529: IP 21Interface:RS 232/analoguePower source:230 V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.HS 260 control 1 9.838 185Accessories for orbital shakers HS/KS 260AS 260.1 Universal attachmentIKAAble to hold most types of container using adjustable tension rollers.Surface: 320 x 320mmAS 260.2 Fixing clip platformFor shaking round bottom vessels, volumetric and Erlenmeyer flasks. Supplied without clips.Max. number of clips (capacity held): 56 x AS 2.1 (25ml), 23 x AS 2.2 (50ml), 23 x AS 2.3 (100ml),11 x AS 2.4 (250ml), 9 x AS 2.5 (500ml), 5 x AS 2.6 (1000ml)AS 260.3 Petri dish attachmentFor gentle mixing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers.With integral anti-slide mat (PP).AS 260.5 Separating funnel attachmentFor HS 260 basic and controlFor shaking, elution, extraction, gassing out, dissolving, enriching. The 3 tension rollers supplied are height-adjustableto accommodate different separating funnel sizes. The separating funnels are secured by means of O-rings(6 O-rings supplied).Capacity: Number of funnels (pear shaped) x volume 6 x 50ml, 5 x 100ml, 3 x 250ml, 3 x 500ml249.838 0809.838 192359.838 1919.838 193Type Description Dimensions(W x D x H)mmAS 260.1 Universal attachment425 x 335 x 135AS 260.2 Gridded clip platform attachment*330 x 330 x 24AS 260.3 Petri dish attachment410 x 370 x 32AS 260.5 Separating funnel attachment334 x 425 x 145labworldsoft ® Software for control and data collectionfor HS/KS 260 control* Clips AS 2.1 (9.838 091), AS 2.2 (9.838 092), AS 2. 3 (9.838 093), AS 2.4 (9.838 094), AS 2.5 (9.838 095) please order separately.PK11111Cat. No.9.838 0809.838 1919.838 1929.838 1939.910 3202345E & OE.www.wenk-labtec.com443

4. Stirring, Shaking, MixingShakers and mixers/Orbital shakersGENERAL CATALOGUE EDITION 1711Orbital shaker, KS501 digital/Reciprocating shaker, HS 501 digitalLow-profile laboratory shaker with large platform and 15kg load capacity.With continuously adjustable speed range: 0 to 300rpm, digital display and timer.Continuous operation is guaranteed even under extreme loads.Requires accessory attachments for operation (these are not supplied)Orbital shaker, KS501 digitalIdeally suited for vessel sizes over 250ml, e.g. round bottom flasks, erlenmeyer flasks, culture flasks, bottles etc.Developed for biological and microbiological growth tests and for production of stock solutions.IKAReciprocating shaker, HS 501 digitalIdeally suited for flasks, measuring cylinders and particularly separating funnels. Developed for universal applications.SpecificationsShaking movementKS 501 digital:orbitalHS 501 digital:reciprocalOrbital diameter:30mmMax. shaking weight (with attachment):15kgMotor rating input/output: 70/19WSpeed range:0 to 300rpmTimer:0 to 56 mins./continuousDimensions (WxDxH):505 x 585 x 120mmWeight (without attachment):26kgProtection class acc. to DIN EN 60529:IP21Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.KS 501 digitalHS 501 digitalHS 501 digital UKOptional accessories: Shaking attachments: AS 501.1, AS 5014, AS 501.5, Non-slip mat STICKMAX1119.838 0409.838 0416.203 237444E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Orbital shakersShakers, KS/HS501 digital, accessoriesFor orbital shaker Ika KS501 digital and reciprocating shaker Ika HS501 digital.AS 501.1 Universal attachmentFor a variety of vessels (flasks, beakers etc.) with volumes of at least 50ml (ideally greater than 250ml).With tension rollers that can be mounted on 2 levels. Usable area: 420mm x 420mm.Dimensions (WxDxH) 480mm x 500mm x 120mm.AS 501.2 Separating funnel attachmentOnly for HS 501 digital. For shaking separating funnels from 50ml to 250ml capacity.Comprises basic holder, 6 tension rollers, 2 x 6 clamping devices.Suitable for 12 x 50ml, 10 x 100ml or 6 x 250ml separating funnels.AS 501.3 Separating funnel attachmentFor HS 501 digital only. For shaking separating funnels of 500ml to 2000ml. Comprises basic holder, 4 tension rollers, 2 x 4 clamping devices.Suitable for 4 x 500ml, 3 x 1000ml or 2 x 2000ml separating funnels.AS 501.6 Separating funnel attachmentOnly for HS 501 digital. For shaking 4 x 1000ml separating funnels.Comprising basic holder, 4 clamping devices, 4 support bars and 8 ground cone section holders.Dimensions (W x D x H) 480mm x 505mm x 225mm, weight 5500g.AS 501.4 Gridded clip attachment(Without spring clips). For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25ml.Dimensions (W x D x H) 475mm x 460mm x 95mm, weight 2640g.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25ml), 55 x AS 2.2 (50ml), 35 x AS 2.3 (100ml), 16 x AS 2.4 (250ml),12 x AS 2.5 (500ml), 8 x AS 2.6 (1000ml)AS 501.5 Dish attachmentFor the gentle movement of petri dishes, but also suitable for gentle mixing in vessels with large, flat bottoms (wide mouth erlenmeyers, beakers).Fitted with a non-slip, plastic mat.Dimensions (W x D x H) 450mm x 450mm x 45mm, weight 1120g. 4 clamping devices with rod AS 1.7.Suitable for 4 x 500ml, 3 x 1000ml or 2 x 2000ml separating funnels.IKAType Description PK Cat. No.AS 501.1AS 501.2AS 501.3AS 501.6AS 501.4AS 501.5Universal attachmentSeparating funnel attachmentSeparating funnel attachmentSeparating funnel attachmentGridded clip attachment*Dish attachment* Clips AS 2.1 (9.838 091), AS 2.2 (9.838 092), AS 2. 3 (9.838 093), AS 2.4 (9.838 094), AS 2.5 (9.838 095) please order separately.1111119.838 0469.838 0479.838 0489.838 0459.838 0509.838 0491234561234569.838 0469.838 0479.838 0489.838 0459.838 0509.838 0497Accessories for orbital and reciprocating shakersClamps for orbital shakers Ika KS 130 basic/control, KS 260 basic/control andreciprocating shakers Ika HS 260 basic/control, HS 501 digital, KS 501 digital, KS4000 i/ic control.IKA7TypeAS 2.1AS 2.2AS 2.3AS 2.4AS 2.5Forbottleml2550100200/250500PK11111Cat. No.9.838 0919.838 0929.838 0939.838 0949.838 095E & OE.www.wenk-labtec.com445

4. Stirring, Shaking, MixingShakers and mixers/Orbital shakersGENERAL CATALOGUE EDITION 1711Shaker Multi Vortex Genie ®Robust and reliable shaking device for mixing and shaking of samples in Erlenmeyer flasks or vials.Properties:- Digital display for speed and time- Speed increase in steps of 10rpm Robust metal case- Secure stand at high speed thanks to supports with high vibration damping- Can be loaded with e. g. max. 6 Erlenmeyer flasks 250ml or 2 multi racks each for 12 test tubes(max. tube diameter 29mm, length min. 85mm)- After 10 minutes of non use, the mixer switches to "sleep" modeNEW!Supplied with: incl. platform with clamp/tension roller (for securely attaching standing vessels) and 2 multi-racks.SpecificationsType of movement:Dimensions (WxDxH):Weight:Supply requirements:Speed range:vibrating310mm x 270mm x 195mm11.3kg230V, 50Hz250rpm to 950rpmDescription PK Cat. No.2Multi Vortex-Genie ® 1 9.730 0902Shaker Orbital-Genie ®NEW!Benchtop Orbital Shaker with Universal Ratcheting Clamps provides the flexibility for using a mix of different sizeand shape vessels on a single platform. Unit is supplied with two ratcheting and one non-ratcheting cushioned clamps.Extra ratcheting clamps for more than two rows of smaller vessels are optional.SpecificationsType of movement:Dimensions (WxDxH):Weight:Supply requirements:Speed range:orbital310mm x 270mm x 195mm12kg230V, 50Hz10 to 300rpmDescription PK Cat. No.Orbital-Genie ® 1 9.730 091446E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakers1Platform shakers Titramax 100/101/1000VibratingHeidolph1Your advantages- Rule out accidents: all models have been designed with a low centre of gravity which prevents gliding at high speed,even on a damp surface- Choose between different shaking motions, orbits, angles and load capacities the right model for your specificapplication- Unlimited visual reaction control at all times: the transparent, non-fogging PETG material offers it all- For applications in microbiology: insulated drive system prevents any heat-up coming from the motor andconsequently thermal damage to your sample- Immediate access: optional incubator hood opens instantly and interlocks in any position- An over temperature sensor preventatively shuts off the unit in a dangerous heat-up situation, particularly valuablefor you in case of unattended continuous operationTitramax 100 - The compact model- Titramax 100 is a compact and space saving unit that accepts load capacities of 2kg and space for 4 microtiter plates- Your analog process timer allows for unattended operation and can be set from 1 to 120 mins. After time expires thismodel sends an acoustic alarm and operation is stopped- Set and continuously adjust the variable speed on the analog control knob from 150rpm to 1350rpm- The 1.5mm vibration orbit performs gentle mixing with best results using small sample volumesTitramax 101 - The strong model- Includes all Titramax 100 features, plus:- The 3mm vibration orbit accomplishes better results with higher volume samples than the Titramax 100 to yieldconsistent mixing of samples in the plateTitramax 1000 - The incubating model- Includes all Titramax 100 features, plus:- The use of 6 microtiter plates increases your throughput by 50%- The 1.5mm vibration orbit performs gentle mixing with best results using small sample volumes- Titramax 1000 is a medium sized model and accepts load capacities of 5kg- This model is suitable for the modular incubator system and is recommended for applications which require variabletemperature control of up to 65°CType Orbit Rotation Max. no. Width Depth Height PK Cat. No.speedplatesmm rpm mm mm mmTitramax 100Titramax 101Titramax 10001,53,01,5150 - 1350150 - 1350150 - 13504462452453203103103751251251251119.839 8319.839 8329.839 830Platform shakers Vibramax 100/110VibratingHeidolph2Vibramax 100 - The compact model- A large selection of attachments is provided for the use of various vessels and sizes- Vibramax 100 is a compact and space saving unit with a load capacity of 2kg- The 3mm vibration orbit gives excellent results especially in large vessels, allows for smooth to ridged mixing ofviscous media and solids- Set and continuously adjust the variable speed on the analog control knob from 150rpm to 1350rpm- Analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires thismodel sends an acoustic alarm and operation is stopped- Optional attachments with tension rollers accepts any glassware sizeVibramax 110 -The efficient modelincludes all Vibramax 100 features, plus:- The shaking orbit of 1.5mm performs a gentle motion for sensitive samples- Set and continuously adjust the variable speed on the analog control knob from 150rpm to 2500rpm- Ideal for the optional attachment to use 49 test tubes that increases your throughput significantly39.839 833Type Orbit RotationspeedMax.loadingInternaldimensions(W x D x H)mm rpm kg mmVibramax 100Vibramax 1103,01,5150 - 1350150 - 250022245 x 310 x 125245 x 310 x 140Attachments are not included - Please order separatelyPK11Cat. No.9.839 8339.839 835239.839 835E & OE.www.wenk-labtec.com447

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1711Platform shakers Duomax 1030 - rockingDuomax 1030 - The incubating modelHeidolph- This model is suitable for the modular incubator system and is recommended forapplications which require variable temperature settings- Choose your angle between these two options: Tilt angle to 5° for soft and gentle movementsor tilt angle to 10° for a much stronger motion- Set and continuously adjust the variable speed on the analog control knob from 2rpm to 50rpm, ideal for mediabottles- Analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires thismodel sends an acoustic alarm and operation is stopped- The Duomax 1030 is a medium sized model and accepts load capacities of 5kgType Angle RotationspeedrpmDuomax 10305 2 - 50Duomax 103010 2 - 50Max.loadingkg55PK11Cat. No.9.839 8559.839 85622Platform shakers Polymax 1040/2040 - wavePolymax 1040 - The incubating modelHeidolph- This model is suitable for the modular incubator system and is recommended forapplications which require variable temperature control up to 65°- Choose your angle between these two options: Tilt angle to 5° for soft and gentle movementsor tilt angle to 10° for a much stronger motion- Use this model for any vessel, from culture plates, media bottles and Erlenmeyer flasks, there is no limit- Set and continuously adjust the variable speed on the analog control knob from 2rpm to 50rpm,ideal for cell culture plates- Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expiresthis model sends an acoustic alarm and operation is stopped- The Polymax 1040 is a medium sized model and accepts load capacities of 5kgPolymax 2040 - The resilient modelincludes all Polymax 1040 features, plus:- Set and continuously adjust the variable speed on the digital display from 2.5rpm to 50rpm, ideal for cell cultureplates- Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expiresthis model sends an acoustic alarm and operation is stopped- The Polymax 2040 is a large model and accepts load capacity of 10kg for high sample throughputType Angle RotationspeedMax.loadingDimensions(W x D x H)rpm kg mmPolymax 10405 2 - 505 320 x 375 x 195Polymax 104010 2 - 505 320 x 375 x 195Polymax 20405 2,5 - 5010 426 x 435 x 208Polymax 204010 2,5 - 5010 426 x 435 x 208PK1111Cat. No.9.839 8579.839 8599.839 8049.839 800448E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersPlatform Shakers Rotamax 120/Unimax 1010/2010 - orbitalRotamax 120 - The compact modelHeidolph- Wide range or accessories, attachments and clamps for up to 16 Erlenmeyer flasks available- The shaking orbit of 20mm performs a gentle motion for sensitive samples and supports culture plates andErlenmeyer flasks- Set and adjust continuously variable speed on the analog control knob from 20rpm to 300rpm- Your analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expiresthis model sends an acoustic alarm and operation is stopped- Rotamax 120 is a compact and space saving unit that accepts load capacities of 2kg and offers space for 4 mediumsized culture platesUnimax 1010 - The incubating modelincludes all Rotamax/Unimax features, plus:- This model is suitable for the modular incubator system and is recommended for applications which require variabletemperature control up to 65°C- The shaking orbit of 10mm performs a gentle motion for sensitive samples and supports culture plates andErlenmeyer flasks- Set und continuously adjust the variable speed on the digital display from 30rpm to 500rpm- Your digital process timer allows for unattended operation and can be set from 1 to 999 minutes. After time expiresthis model sends an acoustic alarm and operation is stopped- The Unimax 1010 is a medium sized model and accepts load capacities of 5kgUnimax 1010 packageIncludes- 1 x orbital platform shaker Unimax 1010- 1 x heating modul- 1 x high incubator hoodUnimax 2010 - The resilient modelincludes all Unimax 1010 features, plus:- The shaking orbit of 20mm performs a gentle motion for sensitive samples and supports culture plates andErlenmeyer flasks- Set and adjusturent continuously variable speed on the digital display from 20rpm to 400rpm- Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expiresthis model sends an acoustic alarm and operation is stopped- Increase your sample throughput with the optional multi-tier attachment for a variety of vessel sizes- The Unimax 2010 is a large model and accepts a load capacity of 10kg for high sample throughputType Orbit RotationspeedMax.loadingDimensions(W x D x H)mm rpm kg mmRotamax 1202020 - 3002 245 x 310 x 125Rotamax 120 UK2020 - 3002 245 x 310 x 125Unimax 10101030 - 5005 320 x 125 x 375Unimax 1010 UK1030 - 5005 320 x 125 x 375Unimax 1010 Package 1030 - 5005 320 x 125 x 375Unimax 20102020 - 40010 426 x 135 x 435Attachments are not included - Please order separately4Platform shakers Promax 1020/2020 - reciprocating12349.839 8379.839 8519.839 801PK111111Cat. No.9.839 8379.839 7999.839 8519.839 7979.839 8399.839 801123Promax 1020 - The incubating modelHeidolph- This model is suitable for the modular incubator system and is recommended forapplications which require variable temperature control up to 65°C- Wide range of accessories, attachments and clamps for separatory funnels available- With a stroke length of 32mm the Promax model performs an ideal motion for separatory funnels- Set and continuously adjust the variable speed on the digital display from 30rpm to 250rpm- Your digital process timer allows for unattended operation and can be set from 1 to 999 minutes. After time expiresthis model sends an acoustic alarm and operation is stopped- The Promax 1020 is a medium sized model and accepts load capacities of 5kgPromax 2020 - The resilient modelincludes all Promax 1020 features, plus:- With a stroke length of 20mm this Promax model can mix larger volumes with ease- Set and continuously adjust the variable speed on the digital display from 20rpm to 400rpm; ideal for separations- Your digital process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expiresthis model sends an acoustic alarm and operation is stopped- The Promax 2020 is a large model land accept a load capacity of 10kg for high sample throughputType Orbit RotationspeedMax.loadingDimensions(W x D x H)mm rpm kg mmPromax 1020 3220 - 2505 320 x 375 x 125Promax 2020 2020 - 40010 426 x 435 x 135PK11Cat. No.9.839 8539.839 802E & OE.www.wenk-labtec.com449

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1711Accessories for shakers and mixersTemperature Controlled ShakingNEW!HeidolphType Class PK Cat. No.Attachment with 2 tension rollersTest tube attachment for up to 49 test tubes, 12 x 80mm dia. x LTest tube attachment for up to 36 test tubes, 16 x 80mm dia. x LAttachment for up to 22 x 25ml erlenmeyer flasksAttachment for up to 14 x 50ml erlenmeyer flasksAttachment for up to 9 x 100ml erlenmeyer flasksAttachment for up to 5 x 250ml erlenmeyer flasksAttachment for up to 4 x 500ml erlenmeyer flasksAttachment for up to 2 x 1000ml erlenmeyer flasksAttachment with 2 tension rollersSpare tension rollerAttachment for up to 4 conical separating funnels, 50ml or 100mlUniversal perforated platform 1000Universal perforated platform 2000Size 1, 25ml erlenmeyer clamp with attachment clipfor the perforated platform, max. 36 per platformSize 2, 50ml erlenmeyer clamp with attachment clipfor the perforated platform, max. 36 per platformSize 3, 100ml erlenmeyer clamp with attachment clipfor the perforated platform, max. 23 per platformSize 4, 250ml erlenmeyer clamp with attachment clipfor the perforated platform, max. 12 per platformSize 5, 500ml erlenmeyer clamp with attachment clipfor the perforated platform, max. 9 per platformSize 6, 1000ml erlenmeyer clamp with attachment clipfor the perforated platform, max. 5 per platformSize 7, 2000ml erlenmeyer clamp with attachment clipfor the perforated platform, max. 3 per platformSize 1 separatory funnel clamp for platform 2000(250 ml - max. 4, 500/1000ml - max. 3 per platform)Size 2 separatory funnel clamp for platform 2000(2000 ml - max. 2 per platform)Frame for tension rolleronly. Supplied without tension rollerTension roller and frame complete. Order at least 2Multi-storey attachment. Includes perforatedplatform 2000 and 4 supporting rodsTest tube stand for up to 6 Eppendorf vessels (1.5ml)Tension plate for caps allows for the use of common bottles with dia. 94mmV2A support rod with vessel holderAttachment for 10 test tubes 10 or 60mmAdapter for 20 test tubes dia. 10 to 18mmUniversal adapter (for flasks, bottles, test tube racks, etc.)Set of holders for four 1I bottlesSet of holders for four 0.5I bottlesBCCDDDDDDDDDDEB, C, D, EB, C, D, EB, C, D, EB, C, D, EB, C, D, EB, C, D, EB, C, D, EEEEEE11111111111111111111111111111111119.839 8449.839 8419.839 8429.839 8619.839 8629.839 8639.839 8649.839 8659.839 8669.839 8699.839 8709.839 8719.839 8149.839 8139.839 8169.839 8179.839 8189.839 8199.839 8219.839 8229.839 8209.839 8239.839 8279.839 8119.839 8129.839 8266.229 9037.055 4189.730 0219.730 0459.730 2229.730 2239.839 8089.839 809232 3Shakers, 3000 seriesHousing made of high impact strength polystyrene, finished in off-white.GFLThe base plate is made of electrolytically galvanized, powder-coated sheet steel, the shakingplatform of anodised aluminium, equipped with four plastic pins (models 3005 to 3018 and 3023) for secure attachmentof accessory equipment (holds almost all shapes of vessels used in standard laboratory applications).Models 3019/3020: Shaking platform made of electrolytically galvanized, powder-coated sheet steel, equipped with foursupport rods with screw-type clamps made of stainless steel. Clearly laid out control panels for easy operation and ana.c. motor with overload protection drives the unit. Stepless, electronic speed control, with soft-start and quietoperation. Constant speed maintained during continuous operation, independent of load. Suitable for use inlaboratories, incubation and controlled environment rooms at ambient temperatures between +10°C and +50°C.The devices are low-maintenance, have the German seal for proven Safety (GS) and the CE mark.Analogue control models (1)3005/3006/3011/3013/3015/3016/3019/3023.Timer for operations up to 60min. and continuous operation.Digitally control models (2)3012/3014/3017/3018/3020.Microprocessor controlled, with interface RS232. Timer: 1 min. up to 99:59 h or continuous operation.Speed and remaining time indicated by two LCD readouts.450E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakers1Shaker 3005With orbital motion.GFLSpace-saving, universally applicable. Either for gentle movement of liquids or vigorousmixing. Applications are in biology and microbiology laboratories and in diagnostic test reactions. Compact, low-wearcounterbalanced drive mechanism, ensuring high stability for continuous operation.1SpecificationsOverall (WxDxH):Platform (W x D):Max. loading:Type of movement:Orbit:Shaking speed:Supply requirements:Net/Gross weight:Timer:380 x 510 x 140mm330 x 330mmmax. 8kgorbital10mm20 to 500rpm230V 50/60Hz, 82 W10/12kgup to 60 min or continuous operationType PK Cat. No.3005 1 9.837 9052Shaker 3006With reciprocating motion.For gentle back and forth motion as well as intensive shaking of liquids, especially inseparating funnels. Applications are in medical diagnostics or analysis, as well as for culturing micro-organisms,cell and tissue cultures. The stable, low-friction, counterbalanced drive mechanism ensures a reliable,continuous operation.GFL2Technical Specification:Overall (WxDxH):Platform (W x D):Max. loading:Type of movement:Stroke:Shaking speed:Supply requirements:Net/gross weight:Timer:380 x 510 x 140mm330 x 330mm8kgReciprocating20mm20 to 300rpm.230V 50/60Hz, 65W10/12kgup to 60 min. or continuous operationType PK Cat. No.3006 1 9.837 9063Shakers 3011 and 3012With orbital rocking motion.For gentle and uniform orbital rocking motion, quiet. Applications in AIDS research,for diagnostic tests with test plates or for growing cell cultures and microorganisms.(3012 with RS 232 interface)GFL3Technical SpecificationsOverall (WxDxH):510 x 625 x 168mmPlatform (W x D):450 x 450mmMax. loading:max. 15kgType of movement:Three-dimensional, orbital rockingPlatform angle: 3°Shaking speed:2 to 50rpm.Supply requirements:3011: 230V 50/60Hz, 90W3012: 230V 50 or 60 Hz, 90W*Net/gross weight:18/22kgTimer:3011: up to 60 min or continuous operation3012: 1 min to 99:59 hours or continuous operationModel 3012:microprocessor controlled; RS232 interfaceType PK Cat. No.30113012*** Please specify when placing your order !**Speed and remaining time indicated by 2 LC-displaysE & OE.www.wenk-labtec.com119.837 9119.837 912451

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1711Shakers 3013 and 3014With rocking motion.Compact, low-wear counterbalanced drive mechanism for slow and uniform rockingmotion, quiet. The devices create reproducible growth and processing conditions at low speeds for cell culturesand other media. Ideal rinsing and tumbling of the samples.Various applications, e.g. for the supply of parallel cultures and cell lines or for staining or de-staining of gels.Technical SpecificationsOverall (WxDxH):510 x 625 x 168mmPlatform (W x D):450 x 450mmMax. loading:15kgPlatform angle: 3°Shaking speed:2 to 50rpm.Supply requirements:3013: 230V 50/60Hz, 90W3014: 230V 50 or 60Hz, 90W*Net/gross weight:18/21kgTimer:Model 3013:1 to 60 min or continuous operationModel 3014:1 min to 99:59 hours or continuous operationModel 3014:microprocessor controlled,with RS-232 interfaceGFLType PK Cat. No.30133014*** Please specify when placing your order!**Speed and remaining time indicated by 2 LC-displays.119.837 9139.837 91422Shakers 3015 and 3017With orbital motion.For gentle motion or vigorous shaking of liquids. Quiet operation. For universal application, e.g. in biochemistry,biotechnology, microbiology, bacteriology and virology, especially suitable for growing microorganisms,cell and tissue cultures. Compact, low-wear counterbalanced drive mechanism for orbital shaking motion.GFLTechnical SpecificationsOverall (WxDxH):510 x 625 x 142mmPlatform (W x D):450 x 450mmMax. loading:15kgType of movement:OrbitalOrbit:30mmShaking speed:20 to 300rpm.Supply requirements3015: 230V 50/60Hz, 65W3017: 230V 50 or 60Hz, 65W*Net/gross weight:18/22kgTimer:3015: up to 60 min. or continous operation3017: 1 min up to 99:59 hours or continous operationModel 3017:microprocessor controlled,with RS-232 interfaceType PK Cat. No.30153017*** Please specify when placing your order!**Speed and remaining time indicated by 2 LC-displays.119.837 9159.837 917452E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakers1Shakers 3016 and 3018With reciprocating motion.For vigorous and intensive shaking e.g. of clamped, recumbent flasks, mixing flasks or separating funnels.Quiet operation. The shaking platform's jerky, back and forth motion creates high turbulence,thus thoroughly mixing the media, e.g. when producing suspensions and emulsions.Applications are varied, e.g. medical diagnostics, foodstuffs or environmental analyses.Compact, low-wear, counterbalanced drive mechanism for reciprocal shaking motion.(3018 supplied with RS232 interface)GFL1Technical Specifications:Overall (WxDxH):510 x 625 x 145mmPlatform (W x D):450 x 450mmMax. loading:15kgType of movement:ReciprocatingStroke:30mmShaking speed:20 to 300rpm.Supply requirements:3016: 230V 50/60Hz, 65W3018: 230V 50/60Hz, 65W*Net/gross weight:18/22kgTimer:3016: Up to 60 min. or contiunous operation3018: 1 min. up to 99:59h. or continous operationModel 3018:is microprocessor controlledType PK Cat. No.30163018*** Please specify when placing your order.**Speed and remaining time indicated by 2 LC-displays.119.837 9169.837 9182Shakers 3019 and 3020With orbital motion.GFLWith a large shaking tray for accommodating heavier loads. Well-suited for gentle motionor vigorous mixing of the most varying liquids, thanks to its useful shaking amplitude and the option of adjusting itsspeed. Quiet, universally applicable, e.g. for analytical or diagnostic applications in the pharmaceutical industry,chemistry, biology, or in plant breeding or nutritional applications, in the growing of microorganisms, cell and tissuecultures. Compact, low-wear counterbalanced drive mechanism, ensuring high stability and dependability.(3020 with RS 232 interface)2Technical SpecificationsOverall (WxDxH):Platform (W x D):Max. loading:Type of movement:Orbit:Shaking speed:745 x 730 x 135mm676 x 540mm30kgOrbital32mm20 to 250rpm, when the rackframe is used 20 to 200rpmSupply requirements:3019: 230V 50/60Hz, 90W3020: 230V 50 or 60Hz, 90W*Net/gross weight:34/40 kgTimer:3019: Up to 60 min. or continuous operation3020: 1 min. up to 99:59 h. or continous operationModel 3020:microprocessor controlled,with a built-in RS-232 interfaceType PK Cat. No.30193020*** Please specify when placing your order.**Speed and remaining time indicated by 2 LC-displays.119.837 9199.837 920E & OE.www.wenk-labtec.com453

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1711Shaking TraysMade of stainless steel with holes to accommodate clamps for Erlenmeyer flasksand other accessory equipment.Type 3950: for Shakers 3005 and 3006.Type 3966: for Shakers 3011 to 3018 (see also Shaking Incubator 3031).Type 3980: for Shakers 3019/3020 (see also Shaking Incubator 3033).Made of 3mm thick anodised aluminium, with holes to accommodate clamps for Erlenmeyer flasksand other accessory equipment.GFLType For Type PK Cat. No.3950396639803005 / 30063011 - 1018 / 30313019 / 3020 / 30331119.837 9729.837 9369.837 98022Clamps for Erlenmeyer FlasksStainless steel, for screwing onto shaking tray 3950, 3966 and 3980,supplied with attachment fittings (see also Shaking Incubators 3031-3033).GFLTypeForflasksClips requiredshaker ModelClips requiredshaker ModelClips requiredshaker ModelPKCat. No.39833984398539863987398839893990ml 3005, 3006 3011 to 3018 3019, 30202545799950254999100163650200122226250-3009162650091226100049122000249Other clamps on request111111119.837 9839.837 9849.837 9859.837 9869.837 9879.837 9889.837 9899.837 99133Test tube rackFor Shakers 3005 and 3006, 3015 to 3020(see also Shaking Incubator 3031, 3032 and 3033).Stainless steel, for max. 24 test tubes, 12mm to 17mm diameter, perforated section can be tilted by 90°,with clamping springs for secure grip and silent shaking of tubes.For screwing onto shaking trays 3950, 3966 and 3980.For trays:Number of racks:3950 33966 63980 9GFLType PK Cat. No.3953 1 9.837 97444Clamps for Separating FunnelsStainless steel, for screwing onto base trays 3950 and 3966.NEW!GFLType Capacity Max. clipsperplatformml39573958395939553956Other clamps on request50 6 / 11100 6 / 11250 4 / 8250 4 / 8500 3 / 6Neckwidth19 / 26 (ISO / Squibb)19 / 26 (ISO / Squibb)19 / 26 (ISO / Squibb)29 / 32 (conical)29 / 32 (ISO / Squibb)PK11111Cat. No.9.837 9759.837 9769.837 9779.837 9709.837 978454E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakers1Holding Frame for a Test PlateStainless steel, for securing a test plate.Screws onto shaking trays 3950, 3966 and 3980 (see also Shaking Incubator 3031).Supplied with attachment material.GFL1For trays:Number microtitration plates:3950 43966 63980 15Type For Type PK Cat. No.3910 3005/3006, 3015-3018, 3019/3020 1 9.837 9792Non-slip MatsUsed as a shaking platform.For the slow moving of e.g. nutrient media solutions in Petri dishes and flasks.Type 3965 also for Shaking Incubator 3031.GFL2Type For Type Width Length PK Cat. No.395139653005 / 30063011 - 3018 / 3031mm300420mm300420119.837 9719.837 9353Universal MountsFor secure attachment of various shaking vessels.Type 3952 for Shakers 3005 and 3006. With 4 rubber coated bars.Type 3967 for Shakers 3011/3012, 3013/3014, 3015/3017, 3016/3018 (see also Shaking Incubator 3031).With 6 rubber coated bars.Type 3982 for Shakers 3019/3020. It consists of 2 longitudinal bars and 6 transverse bars.Screw-type clamps are used for adjusting the longitudinal bars vertically and the transverse bars horizontally.GFL3Type For Type PK Cat. No.3952396739823005 / 30063011 - 3018 / 30313019 / 30201119.837 9739.837 9379.837 9824Platform FrameFor Shakers 3011 to 3014.With 4 levels, with top rims, 3 levels removable. Frame and trays made of stainless steel.Distance between trays 60m. Grooved rubber mats on trays to ensure secure grip of objects.GFL4Type For Type PK Cat. No.3968 3011 - 3014 1 9.837 9385Rack FrameFor Shakers 3019/3020.For doubling the capacity by accomodating 2 shaking trays 3980.Distance between trays 205mm.The bottom tray can be loaded with flasks up to a max. of 500ml.GFL5Type For Type PK Cat. No.3981 3019 / 3020 1 9.837 981E & OE.www.wenk-labtec.com455

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1713Shaker SSM1- Smooth orbital shaking action- Built-in digital timer- Variable speed control to 300rpm- Supplied with non-slip mat for microplates etc.- Optional accessory cradle system for flasks and bottlesStuart29.728 830The compact SSM1 provides a smooth uniform circular motion with an orbit of 16mm. It is supplied with a non-slip matthat can hold up to four microplates or diagnostic cards. Alternatively, an accessory cradle system is available that canaccommodate a variety of vessels including flasks, bottles or beakers via four rubber securing bars.It will hold up to: 4 x 250ml or 2 x 500ml or 1 x 1000ml Erlenmeyer Flasks or bottles.Speed is variable from 30rpm to 300rpm. Once set on the digital display, the shaking speed is effectively maintainedeven over long periods of time. Shaking times can be set to run for 1 to 999 minutes on the built-in digital timer,or the unit can also be set for continuous operation.With BioCote, silver-based, antimicrobial protection.Technical specifications:Platform dimensions (W x D):Speed range:Orbit diameter:Maximum load:Overall dimensions (WxDxH):Net weight:Supply requirement:220 x 220mm30 to 300rpm16mm3kg240 x 300 x 140mm5kg230V, 50Hz, 50W39.728 831Type Description PK Cat. No.SSM1 Shaker, orbital, miniSSM1/1 Accessory cradle with 4 securing barsAttachments are not included - Please order separately44 5Rocking Shaker SSM3/SSM4- Small space saving design, ideal for personal use- Gentle rocking action- Choice of two models: 3D gyratory action SSM3 and See-saw wave action SSM4- Digital speed control and built-in timer- Optional tier system available to increase capacity119.728 8309.728 83112StuartThese compact rockers are ideal where gentle mixing is required. There is a choice of two models:Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-stainingprocedures etc. The tilt angle can be adjusted to any position by hand to optimise mixing of vessels.Model SSM4 has a see-saw rocking action that creates a wave motion within vessels such as culture flasks,Petri dishes etc.Both models are supplied with a non-slip mat and have digital selection of both speed and time.An accessory tier sytem is available. Fitted in seconds, without the need for tools,it triples the available space for samples.With BioCote, silver-based, antimicrobial protection.5Technical SpecificationSSM3/SSM4Rocking action:3D gyratory/See-saw wavePlatform dimensions (W x D):235 x 235mm/235 x 235mmSpeed range:5 to 70rpm/5 to 70rpmAngle of tilt: 3 to 12°/7°Angle adjustable:Yes by hand/NoMaximum load:3kg/3kgOverall dimensions (WxDxH):240 x 300 x 165mm/240 x 300 x 150mmNet weight:5kg/5kgElectrically supply:230V 50Hz, 50WType Description PK Cat. No.SSM3SSM4Rocker, gyratory, miniRocker, see-saw, mini119.728 8209.728 821456E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakers2Shakers, large platform, SSL1 & SSL2- available with orbital or reciprocating action- digital speed selection to 300rpm with soft start- built-in digital timer- reliable, quiet running mechanism- fully adjustable cradle systemStuart1These lab scale platform shakers have powerful yet quiet shaking mechanisms and have been designed for trouble-free,continuous use. The cradle type platforms have six rubber cushioned horizontal securing bars which can be easilyadjusted both vertically and horizontally to hold most sizes and types of vessel, including flasks, bottles and beakers.For example, they will accommodate the following Erlenmeyer flasks or bottles: 12 x 250ml or 8 x 500ml or 6 x 1000mlor 2 x 2000ml. Speed is continuously adjustable and is set digitally. The speed is accurately maintained, even over longruns. A built-in digital timer allows shaking times from 1 to 999 minutes to be set. Alternatively the unit can be set forcontinuous operation.With BioCote silver based antimicrobial protection.Technical SpecificationSSL1/SSL2Platform dimensions (W x D):335 x 335mmSpeed range:30 to 300rpm/25 to 250rpmOrbit/stroke:16mm/20mmMaximum loading:10kgOverall dimensions (WxDxH):360 x 420 x 270mmNet weight:11kgSupply requirements:230V, 50Hz, 50WType Description PK Cat. No.29.728 840SSL1 Shaker, orbital, large platformSSL2 Shaker, reciprocating, large platformSSL1/1* Accessory platform 510 x 510 mmwith twelve rubber securing barsSSL1/2 Accessory flat platform 350 x 350 mm without cradle* For use with SSL1 only.11119.728 8409.728 8419.728 8429.728 84315Rocking shakers SSL3/ SSL4, large platform- Large platform rockers - ideal for multiple usersStuart- Gentle rocking action- Choice of two models- 3D gyratory action SSL3- See-saw, wave action SSL4- Digital speed control and built-in timer- Optional tier system available to increase capacityThese rockers have large platforms able to accommodate a number of samples, ideal for a busy lab.They are very quiet in operation and designed to be run continuously. There are two models available:Model SSL3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, stainingand de-staining procedures etc. The tilt angle can be adjusted to any position by hand to optimise mixing of vessels.Model SSL4 has a see-saw rocking action that creates a wave motion within vessels such as culture flasks,petri dishes etc.Both models are supplied with a non-slip mat and have digital selection of both speed and time.An accessory tier system is available. Fitted in seconds, without the need for tools, it triples the available space forsamples.With BioCote, silver-based, antimicrobial protection.349.728 800Specifications SSL3/SSL 4Rocking action:3D gyratory/See-saw wavePlatform dimensions (W x D):355 x 355mm/335 x 355mmSpeed range:5 to 70rpm/5 to 70rpmAngle of tilt: 3 to 12°/7°Angle adjustable:Yes by hand/NoMaximum load:10kg/10kgOverall dimensions (W xD xH):360 x 420 x 170mm/360 x 420 x 160mmNet weight:10kg/10kgSupply requirements:230V, 50Hz, 50WType Description PK Cat. No.59.728 801SSL3 Rocker, gyratory, lab scaleSSL4 Rocker, see-saw, lab scaleAttachments are not included - Please order separately119.728 8009.728 80134E & OE.www.wenk-labtec.com457

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1711GyroTwister/Gyro Twister Ad- gyratory action provides gentle, thorough mixing- Ideal for staining gels, washing membranes and mixing samples in tubes- fixed angle and adjustable tilt models- safe for cold room or incubator use- platform: 30 x 30 cm- speed range: 3-60rpm- timer: 20 to 120 min or continious- Motion/Pitch: 3D/adjustable ±10°- Motion/Pitch: 3D/Fixed 7° pitch- max. load: 5kg- operating range: +4° to 70°C- dimensions: 33 x 35.2 x 21cm- weight: 6.6kg- electrical: 230V, 50/60HzShaker comes with 30cm x 30cm non-slip platform and dimped tube mat.LabnetDescription PK Cat. No.2GyroTwister AdjustableDimpled mat, 30 x 30cm, for holding tubesGyroTwister 3-D ShakerStaking platform 30 x 30cm, with hardwareLarge platform, 40 x 40cm, with non-slip rubber matExtra large platform, 50 x 50cm, with non-slip rubber matElasticated tie-down23D platform rotator PS-3DSmooth 3D orbital motion for mixing in tubes, culture flasks, dishes and boxes.- ideal size for personal use- variable speed: 10 to 30rpm- operating range: +5° to +40°C- fixed position: 7° tilt angle- Loads up to 0.5kg- 215 x 215mm platform11111146.227 0936.227 0949.595 3349.595 3359.595 3369.595 3379.595 338GrantType PK Cat. No.PS-3D 1 9.721 01433Multi-function 3D rotator PS-M3DWith consistent and reproducible agitation throughout the speed range, multi segmentprogram.- multi function: rotation, reciprocation, vibration- reciprocal 3D rotation: 1 to 360°- vibration: 1 to 6°- loads up to 1kg- variable speed: 5 to 30rpm- fixed position: 7° tilt angle- 215 x 215mm platformGrantType PK Cat. No.PS-M3D 1 9.721 017458E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersAccessories for 3D platform rotator PS-3D and multi-function rotator PSM-3DGrantType Description PK Cat. No.PDMPTP-26Dimpled mat, prevents tubes from rolling aroundAdaptor for 26 tubes up to 11mm dia.119.721 0139.721 01212129.721 0139.721 01233D-Mini Twist and Mini MixerThe Mini Twist and Mini Mixer are small mixers that combine the motions of an orbitalSBPshaker and a rocker to produce a three dimensional action. This action providesthorough yet gentle mixing without foaming. The pitch and speed of the Mini Twister are fixed.A dimpled mat on the platform surface holds tubes firmly in place. The mat will hold as many as 60 x 1.5ml tubes,30 paediatric blood tubes (3ml), 21 standard blood tubes (7ml), 17 x 15ml tubes or 9 x 50ml tubes.The Mini Mixer has a pitch and speed that produces the perfect motion for processing western blots and staining gels.The tilt angle is large.Both shakers may be used in temperature controlled environments.3- gyratory action provides gentle, thorough mixing- Mini Twist: Perfect for centrifuge and blood tubes- Mini Mixer: Designed for processing blots and staining gels- optimal fixed speed and pitch- safe for temperature controlled environmentsBlot boxes- 2 sizes: medium and large- hinged lid and positive catchSupplied with:Mini Twist incl. positioning matMini Mixer incl. anti-slip mat and 2 large blot boxesSpecificationsSpeed range20rpmMotion/Pitch Mini Twist: 3-D/fixed 20°Mini Mixer: 3-D/fixed 5°Maximum load0.8 kgAmbient operating range +4° to 65°CDimensions (WxDxH):Mini Twist: 24.1 x 17.15 x 15.24 cmMini Mixer: 24 x 17.5 x 15cmWeight0.88kgElectrical supply230V, 50 HzDescription PK Cat. No.Mini Twist 3-D shakerMini Mixer 3-D shakerBlot Box 9.1 x 6.6 cm, 3-5 mlBlot Box 11.7 x 8.9 cm , 6-10ml1110109.595 3309.595 3319.595 3329.595 333E & OE.www.wenk-labtec.com459

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1711Orbital Shaker PSU-10iMicroprocessor controlled shaking platform providing smooth and quiet horizontal orbitalmotion for mixing in bottles, flasks and beakers.- Variable shaking speed: 30rpm to 450rpm- Interchangeable platforms for use with a variety of vessels- Loads up to 3kg- Continuous or timed operation with automatic switch-off- Reliable direct drive system- Automatic load balancing system- The four interchangeable accessory platforms enable a wide choice of vessels to be used, including bottles,flasks and beakers, dishes, boxes and petri-dishes.NEW!GrantType PK Cat. No.PSU-10i 1 9.721 019Accessories for Orbital shaking platform PSU-10iGrantType Description PK Cat. No.Bio PP-4PUP-12P12-100P6-250Flat platformUniversal platformPlatform with clamps for 12 x 100mlflasks / 150ml beakersPlatform with clamps for 6 x 250mlflasks / 400ml beakers11119.721 0229.721 0219.721 0239.721 024234523459.721 0229.721 0219.721 0239.721 0246Platform rocker PMR-30, fixed tiltSmooth rocking motion for gentle sample agitation in tubes, culture flasks, dishes and boxes.- side to side rocking motion- variable speed: 7.5 to 30rpm- load up to 0.5kg- fixed position: 7° tilt angle- continuous or timed operation with automatic switch-off- integral timer: 1 min to 24 hours- 210 x 210mm platform- operating ambient 4°C to 40°CGrantType PK Cat. No.PMR-30 1 9.721 0116460E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakers1 2Flask shaker SF1Creates a vigorous shaking action. With clamps to accept 8 flasks up to 500ml capacity.With stepless variable speed control and 10 to 60 minute timer with off and continuousrun settings. Electronic feedback control ensures a constant speed irrespective of the load.Overall 780mm x 270mm x 240mm (WxDxH). Weight 8.3kg. For 230V 50Hz single phase supplies.Accessory side-arms are available for converting 9.950 372 to shake up to 12 flasks. Maximum load: 3L.Each side arm accepts six clamps. Supplied with 4 clamps.With BioCote, silver-based, antimicrobial protection.Stuart12Type PK Cat. No.SF1Spare clampAccessory side arm1119.950 3729.950 3739.950 3743Multi-function-rotators PTR-35/PTR-60Vertical multi-function rotators for thorough mixing in tubes, with multi-segment programme.- Multi-function: vertical rotation, reciprocation, vibration- Continuous or timed operation for each phase- Choice of two models with different speeds and microtube capacities- Speed: 10rpm to 100rpm- Reciprocal rotation: 1 to 90° turning angle- Vibration: programmable in a burst of 1 to 5 seconds- Fully programmable sequence of functions, including pause- Alternative platforms for larger tubesNEW!Grant3Variable speedPTR-30:5 to 30rpmPTR-60:5 to 60rpmType Description PK Cat. No.PTR-35PTR-60for 26 microtubesfor 48 microtubes with 15 mm dia.119.721 0289.721 030Platform for multi-function-rotators PTR-35GrantType For PK Cat. No.PRS-5-12PRS-10PRSC-10PRSC-225/12 tubes up to dia. 30/15mm10 tubes up to dia. 30mm10 tubes up to dia. 30mm, with clips22 tubes up to dia. 15mm, with clips11116.241 4609.721 0389.721 0399.721 040456745676.241 4609.721 0389.721 0399.721 040Platform for multi-function-rotators PTR-60NEW!Grant89Type For PK Cat. No.PRS-8-26PRS-14PRS-488/22 tubes up to dia. 30/15mm14 tubes up to dia. 30mm48 tubes up to dia. 15mm1119.721 0319.721 0329.721 048899.721 0319.721 032E & OE.www.wenk-labtec.com461

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1711Test Tube Rotator 3025Constant uniform rotating tilting motion, particularly suitable for gentle to intensiveGFLshaking and mixing of powdered or liquid substances, e.g. for separating or mixingapplications. The axle for max. 24 test tubes can be removed and can also be loaded outside the rotator.Can be exchanged with an axle with removable clamps.Compact, low-wear drive mechanism. External housing is made of electrolytically galvanized powder coated sheet steel,the axle and the collecting trough are made of stainless steel. Electronic speed control, stepless.Maintenance-free, GS safety approval, comes with CE mark.For max. 24 test tubes: Ø 12/17 mm/ length: 75 to 180 mmTechnical SpecificationExternal dimensions (WxDxH):490 x 330 x 220mmRotational speed:6 to 80rpm.Supply requirements:230V 50/60Hz, 80WNet/gross weight:10/12kgType PK Cat. No.3025 1 9.837 92522Rotating Shaker 3040The specialist shaker with uniform rotating motion. Various applications, e.g. for preciseGFLsedimention, mixing and processing of soil samples (particularly well-suited forprocessing soil samples in glass/plastic wide mouth vessels up to 2000ml rated volume as per DIN 38414,Part 4 to German Standard Methods for Water, Wastewater and Sludge Analysis - Determination of Leachability byWater. Compact, low-wear drive mechanism. External housing is made of electrolytically galvanized, powder-coatedsheet steel. Clearly laid out control panel for easy operation. With LED speed display. Holding device guarantees easyclamping of sample vessels on the shaking rack. Electronic, stepless speed control, constant speed during continuousoperation. Rotating rack incorporates ball bearings on both sides, accommodating a max. of 12 flasks/vessels,round or rectangular, up to 110mm max. dia. and 270mm max. height, stacked in 4 levels, each level with 3 holdingframes. Drive motion is achieved via a v-belt and a sliding hub.With stainless steel clamping frame for safe securing of the sample vessels.For ambient temperatures from 10 to 40°C. Maintenance-free, GS safety approval, CE marked.Technical SpecificationMotion:orbital rotatingSpeed range:1 to 20rpm.Speed control:Electronic, steplessSpeed display:DigitalCapacity:12 bottles/vesselsBottle height range:to max. 270mm heightMax. bottle dims.:110mm, round or squareDrive:d.c. motor with overload protectionDimensions (WxDxH):770 x 700 x 715mmSupply requirements:230V 50/60Hz, 100WMax. load:20kgNet/gross weight:approx. 62/78kgType PK Cat. No.3040 1 9.837 93133Overhead Shaker Reax 2- Quickly clamps in 2 vessels of any size and accepts load capacities up to 1kg- Speed continuously adjustable from 20rpm to 100rpm- Universal adapter allows for the use of various vessels of 50mm to 160mm height- In addition an optional adapter is available for the use of 20 test tubes at a timeHeidolphSpeed:Size (B x T x H):Weight:Mains supply:20 to 100rpm, electronically controlled510 x 235 x 180mm5.2kg230V/50HzType PK Cat. No.462REAX 2 1 9.730 221E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakers1Overhead shakers Reax 20- Overhead Shaker for 4, 8 or 12 bottlesHeidolph- Set and continuously adjust the variable speed on the analog control knob from 1rpomto 16rpm, ideal for waste water analysis. DIN38414-4 conformed.- Other rotation speeds available upon request, for example 0.5rpm to 8rpm or 2rpm to 32rpm- Easy and fast attachments of bottles- Other vessels with 160mm to 290mm height and max. 136mm diameter can be used with a tension plate accessory1Type Width Depth Height PK Cat. No.mm mm mmReax 20 / 4Reax 20 / 8Reax 20 / 1249077010505205205204654654651119.839 8059.839 8069.839 8072 3Rotator drive unit STR4For use with the STR4/1 drum, STR4/2 flask/bottle rotator Drum, STR4/3 figure 8 drum,STR4/4 bottle holder or STR4/5 eppendorf-type tube rack holder. Fitted with illuminatedmains on/off switch. Has variable speed with electronic speed control, range 6rpm to 60rpm,fitted with 10 to 60 minute timer with off and manual over-ride position. Fitted with panel mounted fuse.For use on 230V 50Hz single phase supplies. Overall dimensions (WxDxH) 650mm x 250mm x 250mm.Net weight 6kg. Requires accessory drums for operation.With BioCote, silver-based, antimicrobial protection.Stuart2Type PK Cat. No.3STR4 1 9.950 3754 5Drum STR4/1 for rotator drive unit STR4Square drum which accepts one plate of clips on each side.The plates plug into the drum which is fitted with a push button release/lock mechanism.Without accessory plates.Stuart4Type PK Cat. No.STR4/1 1 9.950 3765Accessory plates for STR4/1To fit drum 9.950 376. Fitted with clips to accept tubes vertically. Supplied in pairs.StuartNo. oftubes121087Dia. PK Cat. No.mm1216192422229.950 3789.950 3799.950 3809.950 3816 7Drum, flask, STR4/2 for rotator drive unit STR4Drum with two platforms for STR4. Accepts two 500ml conical flasks or reagent bottles.The support columns can be detached to give two platforms 10.5cm x 17.5cm each for separating funnels,jars or test tube racks.With BioCote, silver-based, antimicrobial protection.Stuart6Type PK Cat. No.STR4/2 1 9.950 3827E & OE.www.wenk-labtec.com463

4. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakersGENERAL CATALOGUE EDITION 1711 2Drum figure-of-8 STR4/3 for rotator drive unit STR4The drum has a platform which can be adjusted within the drum from horizontal to 45°.In this way the sample container can be rolled and turned end over end at the same time.Suitable for extractions, paint mixing, powders and granular samples.The sample container is held by an adjustable velcro strap.With BioCote, silver-based, antimicrobial protection.Stuart2Type PK Cat. No.STR4/3 1 9.950 38433 4Bottle holder STR4/4 for rotator drive unit STR4Perspex four segment cradle with velcro straps for STR4.Holds 2 to 4 bottles each up to 1000ml capacity.With BioCote, silver-based, antimicrobial protection.Stuart4Type PK Cat. No.STR4/4 1 9.950 38556Rack cradle STR4/5 for rotator drive unit STR4Holds four acrylic racks for end over end mixing of Eppendorf tubes by STR4.StuartThe racks fit under the cradle plates and are held by clips ensuring that the tube lids are pressedfirmly against the plate and thus remain sealed. Supplied with four racks, each with a capacity of 60 Eppendorf tubes.With BioCote, silver-based, antimicrobial protection.9.950 3866Type PK Cat. No.Rack cradle STR4/5Spare rack for STR4/5.119.950 3869.950 387578Roller mixersRecommended for mixing blood samples, viscous substances and liquid-solid suspensionswhere minimum aeration is required. Units can be used in incubators up to 60°C andhumidity up to 80%, or in cold rooms down to 4°C. A magnetic block,stacking system is available separately to stack up to three units without tools, optimizing bench space.- Rocking and rolling action for complete mixing- Choice of analogue fixed speed or digital variable speed model- Digital models have integral timer function- Designed for continuous quiet operationStuart89.728 811Specifications:Amplitude:Maximum load:Roller size (l x d):Power supply:16mm5kg340 x 30mm230 V, 50Hz, 50WDescription6 rollers, analogue6 rollers, digital9 rollers, analogue9 rollers, digitalDimensionsRotation Weight PK Cat. No.(W x D x H)speedmm rpm kg565 x 240 x 110335.11 9.728 810565 x 240 x 1105 to 605.11 9.728 811565 x 360 x 110336.91 9.728 812565 x 360 x 1105 to 606.91 9.728 8137Stacking system for roller mixersStuartType PK Cat. No.SRT/STACK 4 9.728 815464E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Multidimensional shakers3Rotators SB2/SB3The Stuart rotators give gentle but effective mixing, ideal for life sciences applicationssuch as keeping blood samples in suspension. The angle of tilt is fully adjustable.The Rotators can be used in incubators up to 60°C and in cold rooms down to 4°C.StuartThere are six types of tube holder available. Please order separately.SB2:Fixed speed of 20rpm.SB3:Variable speed of 2rpm to 40rpm. Additional digital timer of 1 to 999 minutes. Digital speed control.Specifications:Dimensions (WxDxH): 200 x 270 x 230mmSupply:230 V/50 Hz, 50WWeight:3.2kgType PK Cat. No.SB2SB3119.645 3229.645 323121239.645 3229.645 3234Tube holders for rotators SB2/SB3StuartType For No. ofvesselsPKCat. No.SB3/1SB3/2SB3/3SB3/4SB3/5SB3/6Micro tubes, 10 to 11.5mm dia.Test/blood tubes, 9 to 20mm dia.50ml centrifuge tubes, 25 to 35mm dia.Culture tubes, 12mm dia.Culture tubes, 16mm dia.Culture tubes, 26mm dia.4020126363301111119.645 3249.645 3259.645 3269.645 3279.645 3289.645 3294E & OE.www.wenk-labtec.com465

4. Stirring, Shaking, MixingShakers and mixers/Microtitre plate shakersGENERAL CATALOGUE EDITION 1711Orbit P2 Digital Shaker for 2 microplatesThese vortexers accept all standard microplates.Retaining springs on the contoured steel platform hold samples in place.The Orbit P2 holds two microplates- large digital display with single knob control- suitable for cold room or incubator use- electrical: 230V, 50HzShaker comes with platform for 2 microplates.SpecificationsSpeed range100 to 1200rpmTimer0 to 99 minutes or continuousMotionCircularOrbit size3mmMaximum capacity2 microplatesMaximum load0.3kgAmbient operating range +4° to 65°CBase dimensions(WxDxH)16.8 x 27.9 x 15.3cmWeight4.3kgElectrical supply:230V, 50 HzLabnetDescription PK Cat. No.Orbit P2 Digital Shaker 1 9.595 32822Microtitre shaker MTS 2/4 digitalDedicated shaker for two or four microtitre plates. Orbital movement.- Electronic speed regulation- Digital timer- Acoustic signal at end of timed period- With attachment but without platesIKASpecificationsMotor rating input/output:35/13.2WOrbit:3mmCapacity:two or four microtitre platesSpeed range:0 to 1100rpmSpeed range:Analogue scaleTimer:1 to 99 min/ continuousDimensions (WxDxH):185 x 320 x 105mmWeight:2.7kgHousing IP rating to DIN EN 60529: IP 21Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.MTS 2/4 digital 1 9.838 19533Microplate shaker PMS-1000Reliable, regulated shaking for two or four microplates. Simple screw attachments allowquick and easy fitting of any standard depth 96 or 384 well plates, holding the plate securely in place.- variable speed: 150rpm to 1000rpm-orbit: 2mm- continuous or timed operation- integral timer: 1 min to 24 hours- standard option for two microplates- optional platform MPP-4 for four microplates- ambient 5°C to 40°CGrantType Description PK Cat. No.PMS-1000MPP-4Microplate shakerPlatform for 4 micro plates119.721 0259.721 026466E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Incubator shakers1Incubator Shaker KS4000i controlInnovative incubator shaker design allowing unattended operation in atemperature-controlled environment.- large LED display for speed and time settings- controls with antimicrobial coating for reduction of bacteria- integrated PID temperature control (two Pt1000 temperature sensors can be used)- socket in the work area for connection of an additional temperature sensor e.g. PT1000.60 (included in delivery)- electronic temperature and speed control- electronic timer switch: 0 to 999h (set by the minute or by the hour)- optional built-in cooler for connection to an external cooling unit e.g. KV600- unit switches off automatically if disturbed- unit stops automatically when hood is lifted- collecting tray for spillages with draining tube at rear of unit- all functions can be controlled and documented using labworldsoft ® software- attachments not included - Please order accessories as requiredIKASpecificationsShaking movement:orbitalOrbit:20mmMax. shaker weight (with attachment):20kgMotor rating input/output: 82/24WPower consumption: 1120W (at 230V)Operating time:continuousSpeed range:10 to 500rpmTimer switch (select minutes/hours):0 to 999 h/continuousHeater power:1000WTemperature range: RT +5°C to 80°CTemperature stability (200 ml H2O at target T = 37°C, RT 25°C): 0.1KRecirculating cooler:additional cooling function for KS 4000 icDimensions (WxDxH):580 x 750 x 525mmSpace required (W x D):600 x 600mmWeight:55kgPermissible ambient temperature: 15 to 32°CProtection class acc. to DIN EN 60529:IP30Interface:RS232Supply requirements:230V 50/60HzTested to DIN EN IEC 61010-1.Type PK Cat. No.KS 4000 i controlKS 4000 i control UKKS 4000 ic control*KS 4000 ic control* UK*with built-in cooler11119.837 8904.008 0759.837 8914.008 0771E & OE.www.wenk-labtec.com467

4. Stirring, Shaking, MixingShakers and mixers/Incubator shakersGENERAL CATALOGUE EDITION 17129.837 8949.837 893Accessories for Incubator Shaker KS4000i controlNEW!AS 4000.1 Universal attachmentIKAFor various types of vessels. Infinitely variable clamping rolls allow universal adaptationto various vessels.Dimensions (WxDxH): 470mm x 447mm x 135mmBase plate: 360mm x 410mmWeight: 3200gIncluded with delivery: 1 x AS 1.400 Basic holder, 6 x AS 1.401 Clamping roll, 12 x AS 1.402 Fastening screwAS 4000.2 Fixing clip attachmentFor shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips).Dimensions (W x D x H): 470mm x 444mm x 25 mmBase plate: 430mm x 430mmWeight: 2650gNumber of fixing clips (volume): 50 x AS 2.1(25ml), 48 x AS 2.2 (50ml), 25 x AS 2.3 (100ml), 16 x AS 2.4 (250ml),12 x AS 2.5 (500ml), 7 x AS 2.6 (1000 ml)AS 4000.3 Dish attachmentFor smooth shaking operations in the low viscosity range, e.g. for cell cultures, nutrient media in Petri dishes,culture bottles and vessels with a low centre of gravity. With integrated slip-resistant foil (PP).Dimensions (W x D x H): 470mm x 440mm x 25mmBase plate: 430mm x 430mmWeight: 800g3Type Description PK Cat. No.9.837 892AS 4000.1AS 1.400AS 1.401AS 1.402AS 4000.2AS 4000.3STICKMAXUniversal attachmentBasic holder*Clamping roll*Fastening screw*Fixing clip attachmentDish attachmentAdhesive mat*Spare parts for universal attachment.11111119.837 8949.837 8959.837 8969.837 8979.837 8939.837 8926.236 29312344Incubator 1000, suitable for Heidolph Platform ShakersThis truly unique incubator gives you all in one: Shaking, mixing and heating with visualreaction control at all times. These platform shakers are compatible with the incubatorsystem: Duomax 1030, Polymax 1040, Titramax 1000, Unimax 1010 und Promax 1020.Heidolph- Heating module allows for gentle temperature adjustments up to 65°C- Electrical heater allows for quick and even temperature distribution throughout the entire enclosure- Unlimited visual reaction control at all times: The transparent and non-fogging PETG construction offers it all- Three options available: A flat hood for small vessels and mictrotiter plates, a high hood for all common medium sizedvessels and even a high hood XL for larger Erlenmeyer flasks up to 2000ml- Immediate access: The incubator hood opens instantly and interlocks in any position- Use ONE incubator for numerous shakers, interchangeability is ensured and takes less than 2 mins. You can incubateand mix simultaneously or independentlyHeating module- Heating capacity of 300W allows for quick temperature adjustments- Digital temperature settings up to 65°C and separate display for actual temperature- To protect your sample from thermal damages this unit features a safety circuit to prevent overheating- Electrical heater comes with low, noise blower and provides accuracy of ±2°C up to 50°C and ±4°C over 50°CType Width Depth Height PK Cat. No.mm mm mmIncubator 1000, heating moduleIncubation hood, low,for dishes, tubes etc.Incubation hood, high,for beakers, flasks and funnelsIncubation hood XL1705465465463753943943949716326742811119.839 8759.839 8769.839 8779.839 878Similar products please see page 803.468E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Incubator shakers1MaxQ 2000 & 3000 Open Air Platform ShakersNEW!- Triple eccentric drive handles heavy loads, provides uniform agitation and continuousThermo Scientific24-hour operation, even at high speeds.- Units operate in temperature ranges of 0°C to 40°C and humidity conditions from 20% to 80%,non-condensing enables them to be used in incubators, warm rooms, environmental chambers and refrigerators.- Variable speed control from 15rpm to 500rpm.- Minimise errors by viewing speed and operating time simultaneously on two individual LED displays.- Shaker shutdown and visual/audible alarms signal if unit operates ±10% of set speed,preventing shaker from moving.- User-adjustable speed calibration can be performed using a digital handheld tachometer,where verification is required and protocols can be standardised.- Available as CO2 Resistant Digital Operating System (only for MaxQ 2000)- Five year warranty on parts, one year labor and LIFETIME on drive mechanism.1SpecificationSpeed range:Operating time:Electrical supply:15 to 500 ±1rpm digital40 to 400 ±1rpm analogContinuous and timed operation from 0.1 hour to 999 hoursor 0.1 minute to 999 minutes.240V, 50/60 HzType Description Loadmax.AmplitudeDimensions(W x D x H)PKCat. No.MaxQ 2000MaxQ 2000MaxQ 2000MaxQ 3000MaxQ 3000Benchtop orbital shaker, analogBenchtop orbital shaker, digitalBenchtop orbital shaker, digital,CO2 resistantBenchtop orbital shaker, analogBenchtop orbital shaker, digitalkg15.915.915.922.722.7mm19.019.019.025.425.4mm343 x 442 x 163343 x 442 x 163343 x 442 x 163747 x 655 x 246747 x 655 x 246111114.011 0454.011 0574.011 0584.011 0484.011 0592MaxQ 4000, Orbital Shaker with a Spacious ChamberNEW!- Spacious chamber holds six 2L flasks.Thermo Scientific- View speed, time and temperature simultaneously.- Choose from three temperature ranges.- Clear lid allows sample viewing without disturbing chamber atmosphere.- Choice of analog or digital operating systems.- Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation,even at high speeds.- View speed, operating time and temperature simultaneously on three individual LED displays.- User-adjustable speed calibration- Unbalanced load sensor- Soft start feature- Over-temperature safety feature with independent thermostat provides additional backup by controlling heatif main temperature controller fails.- Five year warranty on parts, one year labor and LIFETIME on mechanism.Also available with analog operating system.2SpecificationsSpeed range, rpm:15 to 500, ±1 rpm digital40 to 400, ±1 rpm analogTemperature accuracy: ±0.1°C accuracy at 37°Operating time:0.1 hour to 999 hours or 0.1 minute to 999 minutesDimensions (L x W x H):813 x 572 x 559 mmSupply requirements:240V, 50/60 HzDescriptionTemp.rangeLoadmax.Amplitude PK Cat. No.Bench-Top-Shaker incubated, analogHigh Temperature Bench-Top-Shaker incubated, analogRefrigerated Bench-Top-Shaker incubated, analogBench-Top-Shaker incubated, digitalHigh Temperature Bench-Top-Shaker incubated, digitalRefrigerated Bench-Top-Shaker incubated, digital°C kgmmRT+10° C - 60° C 22.719.0RT+10° C - 80° C 22.719.0RT- 15° C - 60° C 22.719.0RT+10° C - 60° C 22.719.0RT+10° C - 80° C 22.719.0RT- 15° C - 60° C 22.719.01111114.011 0494.011 0504.011 0514.011 0604.011 0614.011 062E & OE.www.wenk-labtec.com469

4. Stirring, Shaking, MixingShakers and mixers/Incubator shakersGENERAL CATALOGUE EDITION 1711MaxQ 4450 Compact Benchtop Incubated Shakers, orbitalNEW!- Holds up to 4 x 1L flasks.Thermo Scientific- Requires minimal bench space.- Choose between two temperature ranges, 5°C above ambient to 80°C or 5°C below ambient to 80°C.- Clear lid lets you view samples without disturbing internal temperature- Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation,even at high speeds.- Monitor and control chamber temperature range with ±0.1°C accuracy and ±0.5°C uniformity at 37°C.- View speed, operating time and temperature simultaneously on three individual LED displays.- Visual/audible alarms alert you to temperature deviations. Heat turns off if temperature deviates ±1°C of set point.- Soft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure.- Retains parameters during power failure and restarts unit automatically after power is restored.- Over-temperature safety feature with independent thermostat provides additional backup by controlling heat if maintemperature controller fails.- Safety interlock stops platform motion when lid is opened.- 5 year warranty and 10 year on drive mechanism.Also available with analog operating system.SpecificationsSpeed range, rpm:15 to 500 ±1 rpm digital40 to 400 ±1 rpm analogTemperature range: ±0.1°C accuracy at 37°Operating time:0.1 hour to 999 hours or 0.1 minute to 999 minutesDimensions (L x W x H):691mm x 358mm x 401mmSupply requirements:240V, 50/60 HzDescriptionTemp.rangeLoadmax.Amplitude PK Cat. No.Benchtop Incubated Shaker,mini analogBenchtop Incubated Shakerwith Cooling Coil, mini analogBenchtop Incubated Shaker,digitalBenchtop Incubated Shakerwith Cooling Coil, digital°C kgmmRT +5°C - 80°C15.919.0RT +5°C - 80°C15.919.0RT +5°C - 80°C15.919.0RT +5°C - 80°C15.919.011114.011 0524.011 0534.011 0634.011 064470E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Incubator shakers1MaxQ 5000 Incubated and Refrigerated Floor Shakers, orbitalNEW!1- Combines Incubated/Refrigerated Temperatures with an Orbital Shaker forThermo ScientificLarge Capacity Applications- Spacious chamber holds four 6L flasks- Wide temperature range, 10°C above ambient to 60°C on incubated models and 15°C below ambientto 60°C on refrigerated models- Easy-access drain system with quick disconnect fitting permits easy clean up of spills- Drip pan under platform contains spills- Foot pedal opens lid for hands free operation- Retractable foot casters allow easy positioning in the lab- Observe flask contents without opening the door through a large viewing window- Access ports for probes, thermocouples or sensors provided through side of cabinet wall- Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation,even at high speeds.- View speed, operating time and temperature simultaneously on three individual LED displays.- Unbalanced load sensor stops platform motion when excess vibration is detected and visual/audio alarms signaluntil condition is corrected.- Soft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure.- Retains parameters during power failure and restarts unit automatically after power is restored.- Over-temperature safety feature with independent thermostat provides additional backup by controlling heat if maintemperature controller fails.- 5 year warranty and 10 year on drive mechanism.Also available with analog operating system.SpecificationsSpeed range, rpm:15 to 500 ±1rpm digital / 40 to 400 ±1rpm analogTemperature accuracy: ±0.1°C accuracy at 37°Operating time:0.1 hour to 999 hours or 0.1 minute to 999 minutesDimensions (L x W x H):813mm x 1041mm x 1041mmSupply requirements:240V, 50/60 HzDescriptionLoadmax.AmplitudeTemp.rangePKCat. No.Incubated Floor Shaker,analogIncubated and Refrigerated Floor Shaker,analogIncubated Floor Shaker,digitalIncubated and Refrigerated Floor Shaker,digitalkg34.034.034.034.0mm °C25.4RT +10°C - 60°C25.4RT -15°C - 60°C25.4RT +10°C - 60°C25.4RT -15°C - 60°C11114.011 0544.011 0554.011 0654.011 066We can supply thismanufactorer’swholeproduct range !E & OE.www.wenk-labtec.com471

4. Stirring, Shaking, MixingShakers and mixers/Incubator shakersGENERAL CATALOGUE EDITION 1711MaxQ 6000 Incubated and Refrigerated Stackable Shakers, orbital- Available in incubated or refrigerated models.Thermo Scientific- Units can be stacked two high on the floor with the stacking kit accessory.- Two adjustable-height shelves provide added storage.- Large viewing window and internal light offer sample visibility.- View temperature, speed and time simultaneously on three individual displays.- Door can be hinged from the right or left by the user for convenient placement in lab.- Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation,even at high speeds.- Visual/audible alarms alert you to temperature deviations. Heat turns off if temperature deviates ±1°C of set point.- Shaker shut down and visual/audible alarms signal if unit operates ±10% of set speed, preventing shaker frommoving.- Unbalanced load sensor stops platform motion when excess vibration is detected visual/audio alarms signal untilcondition is corrected.- Soft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure.- Retains parameters during power failure and restarts unit automatically after power is restored.- Over-temperature safety feature with independent thermostat provides additional backup by controlling heat if maintemperature controller fails.- Safety interlock stops shaking motion when the door is open.- 5 year warranty and 10 year on drive mechanism.SpecificationsSpeed range:15rpm to 300rpm ±1rpm (stacked)15rpm to 500rpm ±1rpm (unstacked)TemperatureFloor Shaker: 10°C above ambient to 80°CRefrigerated Floor Shaker: 15°C below ambient to 80°CTimer:0.1 hr. up to 999 hr. or 0.1 to 999 min.Power supplyFloor Shaker:240V 50/60Hz, 4.5A, 1100WRefrigerated Floor Shaker:240V 50/60Hz, 7A, 1500WDimensions (L x W x H):838 x 699 x 1029 mmDescriptionLoadmax.Amplitude PK Cat. No.Stackable Incubated Floor Shaker, digitalStackable Incubated and Refrigerated Floor Shakerkg15.915.9mm19.019.0114.011 0674.011 06822Universal Platform for MaxQ ShakerNEW!Thermo ScientificDescriptionUniversal Platforms for MaxQ 2000/4450Universal Platforms for MaxQ 2000Universal Platforms for MaxQ2000/4000 and 6000Universal Platforms for MaxQ 3000Universal Platforms for MaxQ 3000/5000Universal Platforms for MaxQ 3000Dimensionscm28 x 3346 x 6146 x 4676 x 4676 x 4691 x 61PK111111Cat. No.4.009 3274.009 3294.009 3304.009 3314.010 2274.010 228472E & OE.www.wenk-labtec.com

GENERAL CATALOGUE EDITION 174. Stirring, Shaking, MixingShakers and mixers/Incubator shakers1Clamps for MaxQ Shaker (except MaxQ 8000)NEW!Thermo ScientificDescription PK Cat. No.Clamps for Microplate/Deep-well plateClamps for Erlenmeyer Flask 10mlClamps for Erlenmeyer Flask 25mlClamps for Erlenmeyer Flask 50mlClamps for Erlenmeyer Flask 125mlClamps for Erlenmeyer Flask 250mlClamps for Erlenmeyer Flask 300mlClamps for Erlenmeyer Flask 500mlClamps for Erlenmeyer Flask 1000mlClamps for Erlenmeyer Flask 2000mlClamps for Erlenmeyer Flask 4000mlClamps for Erlenmeyer Flask 6000mlClamps for Low Form Culture Flask 2500mlClamps for Fernbach Flask 2800ml111111111111114.009 3404.010 2294.009 3324.010 2304.009 3334.010 2314.009 3344.010 2324.010 2334.009 3354.009 3364.009 3374.009 3384.009 339122RacksforRacks for MaxQ ShakerTest Tube Racks - Full SizeTest Tube Racks - Full SizeTest Tube Racks - Full SizeTest Tube Racks - Full SizeTest Tube Racks - Full SizeMicrocentrifuge, 1.5ml - Full SizeTest Tube Racks - Half SizeTest Tube Racks - Half SizeTest Tube Racks - Half SizeTest Tube Racks - Half SizeTest Tube Racks - Half SizeMicrocentrifuge, 1.5ml - Half SizeNEW!Thermo ScientificSize Description Colour PK Cat. No.mm10-1314-1617-2021-2526-3010-1314-1617-2021-2526-306x126x124x104x103x88x126x66x64x54x53x34x6redorangewhitebluegreenblueredredwhitebluegreenwhite1111111111114.010 2344.009 3424.009 3444.009 3464.009 3484.009 3504.009 3414.009 3434.009 3454.009 3474.009 3494.009 3513Adhesive Flask Mat for MaxQ ShakersNEW!Our Adhesive Flask Mat is an alternative to flask clamps for securing odd shaped objectsThermo Scientificsuch as bottles, volumetric flasks and test tube racks to a shaker platform.Simply place the 23cm x 23cm Adhesive Flask Mat on an anodised aluminum or stainless steel shaker platform andsecure the vessel to it. It will hold Erlenmeyer flasks as large as 4L that contain 2L of media at speeds up to 250rpm.The mat is not suitable for use in water baths.- Easy-to-view samples. The white background makes it easy to determine when to harvest your samples- Simple to clean. Can be restored to like new condition by wiping with alcohol- Long lasting. Months of use without losing adhesive properties3Description PK Cat. No.Flask Mat 23cm x 23cm 1 4.009 506E & OE.www.wenk-labtec.com473

4. Stirring, Shaking, MixingShakers and mixers/Incubator shakersGENERAL CATALOGUE EDITION 1711MaxQ 8000 Incubated and Refrigerated Stackable ShakersNEW!Can be Stacked Two to Three High on the Floor for Space SavingsThermo Scientific- Choose from two temperature ranges to fulfill a number of molecular biology applications.- HEPA filter ensures air inside the chamber remains clean and reduces cross contamination improving culturingconditions.- Slide out platform provides convenient 100% sample access.- Crevice-free Type 304 stainless steel chamber with coved corners and built-in drain keeps spills within the work areaand promotes easy cleaning.- Chamber is tall enough to accommodate 2L Erlenmeyer flasks.- Top platform height is under 61.0 in. (154.9 cm) when units are stacked three high,ensuring ease-of-use and convenient accessibility.- Easy to clean platforms are constructed of 5/16 in., heavy duty brushed anodized aluminum,which does not chip or rust.- Large viewing window and internal xenon light allow sample visibility minimizing the need to open the chamber door.- Electronic components and HEPA filter are easily accessed from the front of the unit, eliminating the need to movethe shaker during regular maintenance or service.- 5 year warranty and 10 year on drive mechanism.For a complete system order:1. Shaker, 2. Platform, 3. ClampsSpecificationsSpeed range:Temperature range:Operating time:Dimensions (L x W x H):Supply requirements:speed ranges from 25rpm to 400rpm ±1rpm±0.15°C5 min. to 199 hours and 59 min.605mm x 846mm x 300mm240V, 50/60 HzTypeTemp.rangeLoadmax.Amplitude PK Cat. No.MaxQ 8000Incubated shakerMaxQ 8000Refrigerated shaker°C kgmm10°C above ambient16.125.4to 60°C5°C or 20°C below ambient16.125.4to 60°C114.011 0704.011 071Universal Platform for MaxQ 8000NEW!Thermo ScientificDescription PK Cat. No.Universal Platform without clamps, 75cm x 46cm 1 4.009 49422Accessories for MaxQ 8000 Stackable Orbital ShakerNEW!Clamps Starter Kit for Thermo Scientific MaxQ 8000 Stackable Orbital Shakers:Content:2 brackets for 25ml Erlenmeyer flask2 brackets for 50ml Erlenmeyer flask2 clamps for 125ml Erlenmeyer flask2 clips for 250/300ml Erlenmeyer flask4 clamps for 500ml Erlenmeyer flask2 brackets for 1L Erlenmeyer flask2 brackets for 2L Erlenmeyer flask1 spare parts pouch (screws)Thermo ScientificOther accessories on request.Description PK Cat. No.Clamps Starter Kit 1 4.009 441474E & OE.www.wenk-labtec.com