Plasma Cutting Products - Kjellberg Finsterwalde

PA-S – Plasma Cutting with Machine and Hand TorchesThe PA-S series is based on conventionalstep-switched power sources which are ideallysuited for automated cutting tasks with machinetorches in combination with 2D guiding systemsand 3D robots, but also for manual use withhand torches.We offer straight standard torches and specialtorches with short shafts as well as torches witha 60° or 90° angled torch head.Further advantages are:• Good quality of both cut surfaces• High lifetime of consumables due to directliquid coolingIt is possible to perform contour and straightcuts as well as bevel cuts up to 60° and interruptedcuts in all 2D and 3D positions.A wide range of accessories is available for thehand torches which make it easy to performmany diverse cutting tasks.PA-S70 W, PA-S45 WPlasma gougingBoth the machine and hand torches can bequickly converted for plasma gouging. Plasmagouging is ideal for eliminating welding defects,cracks, cavities and inclusions for preparing forbackwelding.Plasma gouging does not require after-treatment and producesless smoke compared to gouging with carbon electrodes.Cutting Ranges PA-SCuttingCurrentMaterial thickness in mm10 20 30 40 50 60 70130 APA-S45 W240 APA-S70 WRecommended cutting range (1) Max. cutting range (2) Piercing(1)These data are depending on the materials to be cut and their compositions.(2)Observe piercing capability.(1), (2)Technical Data PA-SPower source PA-S45 W PA-S70 WMains voltage (3)3 x 400 V, 50 HzFuse, slow 63 A 125 AConnected load, max. 38 kVA 76 kVACutting current45 A at 100 % d.c.85 A at 100 % d.c.130 A at 60 % d.c.80 A at 100 % d.c.160 A at 100 % d.c.240 A at 80 % d.c.Dimensions (L x W x H) 1025 x 711 x 970 mm 1380 x 870 x 1080 mmMass 240 kg 460 kg(3)Other voltages and frequencies on request- 7 -