Materials Science & Engineering - Trans Tech Publications Inc.

More documents

Recommendations

Info

Precision Instrumentation and Measurement Current Publications (alphabetically) Eds. Yusaku Fuji and Koichi Maru Applied Mechanics and Materials Vol. 36 The aim of this unique collection of peer-reviewed papers is to deepen the mutual understanding of researchers in precision measurement and related fields and to to initiate joint international research among participants. The contents will be of interest to metrologists and engineers working in many different fields. The topics covered include precision mechanical/electrical measurements, optical measurements, metrology (mechanical, electrical), nano/micro-scale measurements, signal-processing, numerical simulation, precision control, information technology for precision measurement, dynamic calibration for force transducers and the Levitation Mass Method (LMM). The 70 papers are grouped into the chapters: I. Precision Measurement, II. Mechatronics, III: Damped Vibration and Sound, IV. Optical Measurement, V. Electrical Measurement, VI. Measurement in Social Life, VIII. Signal and Image Processing. Available in print (978-0-87849-229-9), 542 pages, 2010, US$246.00/€178.00, also available on CD (978-3-908451-90-7) and eBook (sold separately) PRICM7 Advanced Materials and Processing Eds. Jian-Feng Nie and Allan Morton Materials Science Forum Vols. 654-656 These proceedings of the 7th PRICM conference comprise over 720 peer-reviewed paper grouped into: Symposium A: Advanced Steels and Processing, Symposium B: Advanced High- Temperature Structural Materials, Symposium C: Light Metals and Alloys, Symposium D: Bulk Metallic Glasses and Nanomaterials, Symposium E: Solidification, Deformation and Related Processing, Symposium F: Modeling and Simulation of Microstructures and Processes, Symposium G: Thin Films and Surface Engineering, Symposium H: Advanced Ceramics, Symposium I: Biomaterials, Smart Materials and Structures, Symposium J: Materials Characterization and Evaluation, Symposium K: Composites and Hybrid Materials, Symposium L: Energy Generation, Harvesting and Storage Materials, Symposium M: IOMMMS Global Materials Forum. This work will therefore be an invaluable reference tool for researchers, engineers, scientists and end-producers working in the fields of advanced materials and processing. Available in print (978-0-87849-255-8), 3000 pages, 2010, US$646.00/€468.00, also available on CD (978-3-908452-31-7) and eBook (sold separately) Printing and Packaging Study Eds. Ouyang Yun, Xu Min and Yang Li Advanced Materials Research Vol. 174 This collection of over 127 peer-reviewed papers on Printing and Packaging draws together the current knowledge in this field. The volume is divided into chapters on: “Color Science & Technology”, “Image Processing Technology”, “Digital Printing Technology”, “Technical Study & Standardization”, “Mechanical Engineering & Automation Control”, “Paper & Printability”, “Ink Technology”, “Packaging Materials”, and “Printing History Study”. This makes it a very timely guide to this specialized but important topic. Available in print (978-3-03785-005-3), 564 pages, 2011, US$276.00/€200.00, also available on CD (978-3-908452-84-3) and eBook (sold separately) Product Design and Manufacturing Eds. Xiaodong Zhang, Zhijiu Ai, Prasad Yarlagadda and Yun-Hae Kim Advanced Materials Research Vol. 338 The papers in this book were the object of strict peer-review, and cover the latest advances in, and applications of, advanced design technology, CAD/CAM/CAE, mechanical dynamics, friction and wear and advanced manufacturing technologies. Available in print (978-3-03785-248-4), 830 pages, 2011, US$276.00/€200.00, also available on CD (978-3-03795-073-9) and eBook (sold separately) Progress in Extrusion Technology and Simulation of Light Metal Alloys Eds. Luca Tomesani and Lorenzo Donati Key Engineering Materials Vol. 491 Available in print (978-3-03785-250-7), 300 pages, 2012, US$193.00/€140.00, also available on CD (978-3-03795-075-3) and eBook (sold separately) Progress in Functional Manufacturing Technologies I Eds. Hun Guo, Zuo Dunwen, Hongli Xu, Chun Su, Chunjie Liu and Weidong Jin Key Engineering Materials Vol. 458 The present volume consists of a collection of peer-reviewed papers covering manufacturing process simulation, vibration measurement and reliability analysis, finite element analysis and structure optimization, fault diagnosis and maintenance theory, complex mechanical-electro-liquid systems, effect of machining methods or techniques upon material mechanical properties (such as their effect upon stress states, fatigue resistance, etc.), quality control of manufacturing systems, and so on. This book will be essential reading for production and research engineers, and also for research students and academics interested in these fields. Available in print (978-0-87849-224-4), 402 pages, 2011, US$246.00/€178.00, also available on CD (978-3-908452-67-6) and eBook (sold separately) Progress in Manufacturing Automation Technologies Eds. Guanglin Wang, Huifeng Wang, Jun Liu and Xilin Zhu Advanced Materials Research Vol. 305 This special collection describes the latest progress made in, and research results coming out, of new theories, technologies, methods and equipment in the fields of materials processing and manufacturing automation technology. It will be an essential aid in grasping the new technological and research trends, at the international scale, which will drive worldwide communication and cooperation concerning production, education and research in this field. The main topics covered by this special issue include: Innovation and Experience in Materials Processing and Manufacturing Automation Education, Materials Processing Technology, Manufacturing Process Simulation, Agile Manufacturing, Green Manufacturing and Re-Manufacturing, CAD/CAE/CAPP/ CAM, Computerized Numerical Control Systems and Flexible Manufacturing Systems, Process Monitoring and Quality Control of Manufacturing Systems, Finite Element Analysis and Structure Optimization for Smart Materials and Other Related Topics. A wealth of ideas for the future. Available in print (978-3-03785-196-8), 474 pages, 2011, US$246.00/€178.00, also available on CD (978-3-03795-021-0) and eBook (sold separately) Progress in Measurement and Testing Ed. Yanwen Wu Advanced Materials Research Vols. 108-111 The purpose of this special collection was to gather together the most up-to-date knowledge from researchers and practitioners in academia, industry, and government and to exchange their research ideas and results concerning the state of the art in the areas of advanced measurement and testing. The collection is divided into the chapters: 1) Intelligent Information Processing, 2) Control and Automation, 3) Intelligent Test and Measurement and 4) Industrial Application. The volume constitutes a handy and timely guide to the subject. Available in print (978-0-87849-269-5), 1586 pages, 2010, US$549.00/€398.00, also available on CD (978-3-908452-13-3) and eBook (sold separately) Progress in Micromechanical Research of Fracture of Composite Materials Eds. P.W.R. Beaumont and Y. Shibuya Key Engineering Materials Vol. 430 This special issue collects together selected papers from the oeuvre of Professor Hideki Sekine concerning micromechanical research into the fracture of composite materials. Sophisticated simulation techniques have recently been developed, and used to simulate multi-scale and multi-physical phenomena ranging from the 34 Most titles now also available on CD and eBook, for details visit www.ttp.net
Materials Science & Engineering 2012 molecular level up to the level of the structure. In these simulations, micromechanical modeling is more important due to its ability to extract meaningful results; even from massive numerical simulations. It is hoped that this special issue will provide impetus to making further progress in the fracture mechanics of composite materials. Micromechanical research into the fracture of composite materials is the main focus of his academic career. The phenomenon which we measure in terms of fracture toughness or fracture strength is a macro-scale behavior. It results from fiber-bridging, fiber-breakage, interface debonding, matrix cracking, matrix yielding, matrix creep and so on at the micro-scale. An important aim of his research is to extract meaningful factors affecting the fracture of composite materials and to incorporate those factors into the relevant mathematical model. Available in print (978-0-87849-286-2), 144 pages, 2010, US$124.00/€90.00, also available on CD (978-3-908454-89-2) and eBook (sold separately) Progress in Positron Annihilation Ed. Radosław Zaleski Materials Science Forum Vol. 666 The aim of this special collection is to present recent progress made, and reflect current ideas, in research fields where positron and positronium are involved. The contents cover a wide range of positron-related research topics; including both fundamental (theoretical calculations, radiation chemistry, hyperfine interactions, positronium physics and chemistry) and applied (metal, polymer, thin film and other materials, development of experimental techniques) aspects. This will be of especial interest to anyone planning to use such techniques. Available in print (978-0-87849-208-4), 172 pages, 2011, US$138.00/€100.00, also available on CD (978-3-908451-99-0) and eBook (sold separately) Quantum, Nano, Micro and Information Technologies Ed. Yuanzhi Wang Applied Mechanics and Materials Volume 39 The objective of this special collection was to provide a forum for researchers, educators, engineers and government officials, involved in the general areas of Quantum, Nano, Micro Technologies, mechatronics, robotics, automation, power and sensors, to present their latest research results and to exchange views on the future research paths in these fields. The result is a fascinating review of the state of the art of these topics. Available in print (978-0-87849-218-3), 622 pages, 2011, US$276.00/€200.00, also available on CD (978-3-908452-74-4) and eBook (sold separately) Reaction Diffusion and Solid State Chemical Kinetics V.I. Dybkov Materials Science Foundations Vols. 67-68 This monograph deals with a physico-chemical approach to the problem of the solid-state growth of chemical compound layers and reaction-diffusion in binary heterogeneous systems formed by two solids; as well as a solid with a liquid or a gas. It is explained why the number of compound layers growing at the interface between the original phases is usually much lower than the number of chemical compounds in the phase diagram of a given binary system. For example, of the eight intermetallic compounds which exist in the aluminium-zirconium binary system, only ZrAl3 was found to grow as a separate layer at the Al–Zr interface under isothermal conditions. The physico-chemical approach predicts that, in most cases, the number of compound layers should not exceed two; with the main factor, resulting in the appearance of additional layers, being crack formation due to thermal expansion and volume effects. Available in print (978-0-87849-156-8), 334 pages, 2010, US$166.00/€120.00, also available on CD (978-0-87849-156-8) and eBook (sold separately) Recent Trends in Materials and Mechanical Engineering Materials, Mechatronics and Automation Ed. Qi Luo Applied Mechanics and Materials Vols. 55-57 This collection of over 429 peer-reviewed papers on Materials and Mechanical Engineering is divided into the chapters: 1: Materials Engineering and Mechanical Engineering - 2: Manufacturing and Production Processes - 3: Automotive Engineering and Industry Application. It provides an authoritative overview of the subject. Available in print (978-3-03785-099-2), 2400 pages, 2011, US$552.00/€400.00, also available on CD (978-3-03785-100-5) and eBook (sold separately) Refractories: Recent Developments in Materials, Production and Use Eds. Pietro Vincenzini and James P. Bennett Advances in Science and Technology Vol. 70 The 27 peer-reviewed papers collected here together offer a plenitude of up-to-date information on “Refractories: Recent Developments in Materials, Production and Use”. The papers are conveniently arranged into RAW MATERIALS, TESTING, MANUFACTURING, SELECTION, DESIGN AND USE, SYSTEM MODELING, SIMULATION AND SELECTION CRITERIA. This special volume is part of CIMTEC 2010 and has also been published online in the series, “Advances in Science and Technology”. Available in print (978-3-908158-53-0), 220 pages, 2011, US$166.00/€120.00, also available on CD (978-3-908158-37-0) and eBook (sold separately) Researches in Powder Metallurgy Eds. Ionel Chicinaş and Liviu Brânduşan Materials Science Forum Vol. 672 The present volume provides an up-to-date, comprehensive and worldwide state-of –the art insight into Powder Metallurgy, including: New theoretical aspects of Powder Metallurgy, Modelling and Simulation, Sintered Steels, PM Nonferrous Materials, PM Tool Materials, PM Lightweight and Porous Materials, PM Functional Materials, Powder Manufacturing and Pressing, Sintering Process, Metal Injection Moulding, Full Density and Alternative Consolidation Processes, Secondary and Finishing Operations. Available in print (978-3-03785-010-7), 354 pages, 2011, US$218.00/€158.00, also available on CD (978-3-908452-90-4) and eBook (sold separately) Residual Stresses VIII Eds. Paolo Scardi and Cristy L. Azanza Ricardo Materials Science Forum Vol. 681 The present volume comprises the most significant contributions made to the 8th European Conference on Residual Stresses (ECRS8), held in Riva del Garda (Trento, Italy) on June 26-28, 2010. The main topics covered were: experimental methods (including neutron and synchrotron radiation residual stress analysis), strain mapping, in situ analysis, micro-strain studies, texture-stress relationships, residual stress modelling and computation, generation of residual stresses by manufacturing and processing of materials, residual stresses in thin films, coatings and in multiphase materials, residual stresses and phase transformations, grain interaction mechanisms and elasto-plastic behaviour of materials, multiscale modelling and scale-bridging aspects. This work provides an up-tothe-minute guide to this important subject. Available in print (978-3-03785-085-5), 542 pages, 2011, US$276.00/€200.00, also available on CD (978-3-03785-086-2) and eBook (sold separately) Robotics and Automation Systems Eds. Cornel Brișan, Vistrian Mătieș, Sergiu-Dan Stan and Stelian Brad Solid State Phenomena Vols. 166-167 This volume consists of a collection of papers arising from the 5th International Conference on Robotics – ROBOTICS 2010, which was held in Cluj-Napoca, from the 23rd to the 25th September, 2010, and was organized by the Technical University of Cluj- Napoca, Department of Mechanisms, Precision Mechanics and Mechatronics, and the Romanian Society of Robotics (SRR). The presentations covered the topics of: Robotics; Mechanical design of robot architectures, Sensors and actuators in robotics; Mobile robots navigation and obstacle avoidance; Mechatronics; Industrial automation, process control, manufacturing processes and automation; Micro- and nano-robots, parallel robots; Artificial intelligence, intelligent control, neuro-control, fuzzy control and their applications; Control system modeling, simulation techniques and methodologies; Biomedical and rehabilitation engineering, prosthetics and artificial organs; Tele-operation, tele-robotics, For full table of contents and descriptions of each title visit our web site at: http://www.ttp.net 35
Page 1 and 2: Materials Science & Engineering 201
Page 5 and 6: Advanced Materials Materials Scienc
Page 7 and 8: Advanced Powder Technology VII Mate
Page 25 and 26: Information Technology for Manufact
Page 27 and 28: Manufacturing Systems and Industry
Page 29 and 30: Mechanical Behaviour of Materials M
Page 33: Materials Science & Engineering 201
Page 37 and 38: Smart Materials and Intelligent Sys
Page 39 and 40: The Coatings in Manufacturing Engin

Materials Science & Engineering - Trans Tech Publications Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?