bibliography on modeling and analysis of systems transients using

More documents

Recommendations

Info

$Z-scan measurements of the nonlinear refractive - Electrical and ...$

[257] L. Kojovic and S. Hassler, "Application of currentlimiting fuses in distribution systems for improvedpower quality and protection", IEEE Trans. on PowerDelivery, vol. 12, no. 2, 791-800, April 1997.4. MODELING GUIDELINES[258] CIGRE Working Group 02 (SC 33), "Guidelines forRepresentation of Network Elements when CalculatingTransients", 1990.[259] IEEE Task Force on Slow Transients (M.R. Iravani,Chairman), "Modeling and Analysis Guidelines forslow transients. Part I : Torsional Oscillations;Transient Torques; Turbine blade vibrations; Fast bustransfer", IEEE Trans. on Power Delivery, vol. 10, no.4, pp. 1950-1955, October 1995.[260] IEEE Task Force on Slow Transients (M.R. Iravani,Chairman), "Modeling and Analysis Guidelines forslow transients. Part II : Controller Interactions;Harmonic Interactions", IEEE Trans. on PowerDelivery, vol. 11, no. 3, pp. 1672-1677, July 1995.[261] IEEE Task Force on Slow Transients (M.R. Iravani,Chairman), "Modeling And Anlysis Guidelines forslow transients - Part III : The study of ferroresonance",1998 IEEE Summer Power Meeting, July 12-16, San Diego.[262] IEEE TF on Fast Front Transients (A. Imece,Chairman), "Modeling guidelines for fast transients",IEEE Trans. on Power Delivery, vol. 11, no. 1,January 1996.[263] IEEE TF on Very Fast Transients (D. Povh,Chairman), "Modeling and analysis guidelines for veryfast transients", IEEE Trans. on Power Delivery, vol.11, no. 4, October 1996.[264] IEEE Task Force on Power Electronics (L. Tang,Chairman), "Guidelines for modeling power electronicsin electric power engineering applications", IEEETrans. on Power Delivery, vol. 12, no. 1, pp.505-514, January 1997.5. SIMULATION TOOLS[265] K. Carlsen, E.H. Lenfest and J.J. LaForest,"MANTRAP : Machine and network transientsprogram", Proc. of IEEE PICA, pp. 144-151, 1975.[266] S.N. Talukdar, "METAP - A modular and expandableprogram for simulating power system transients", IEEETrans. on Power Apparatus and Systems, vol. 95, no.6, pp. 1882-1891, November/December 1976.[267] F.L. Alvarado, R.H. Lasseter and Y. Liu, "Anintegrated engineering simulation environment", IEEETrans. on Power Systems, vol. 3, no. 1, pp. 245-253,February 1988.[268] F.L. Alvarado and Y. Liu, "General purpose symbolicsimulation tools for electric networks", IEEE Trans. onPower Systems, vol. 3, no. 2, pp. 689-697, May 1988.[269] P. Bornard, P. Erhard and P. Fauquembergue,"MORGAT : A data processing program for testingtransmission line protective relays", IEEE Trans. onPower Delivery, vol. 3, no. 4, pp. 1419-1426, October1988.[270] W. Long et al. "EMTP. A powerful tool for analyzingpower system transients", IEEE Computer Applicationsin Power, vol. 3, no. 3, pp. 36-41, July 1990.[271] E. Gunther, T. Grebe, R. Adapa and D. Mader,"Running EMTP on PCs", IEEE ComputerApplications in Power, vol. 6, no. 1, pp. 33-38,January 1993.[272] H.K. Hoidalen, "ATPDRAW - Reference Manual",Portland, 1994.[273] O. Nayak, G. Irwin and A. Neufeld, "GUI enhanceselectromagnetic transients simulation tools", IEEEComputer Applications in Power, vol. 8, no. 1, pp.17-22, January 1995.[274] P. Lehn, J. Rittiger and B. Kulicke, "Comparison ofthe ATP version of the EMTP and the NETOMACprogram for simulation of HVDC systems", IEEETrans. on Power Delivery, vol. 10, no. 4, pp.2048-2053, October 1995.[275] J. Mahseredjian and F. Alvarado, "Creating anelectromagnetic transients program in MATLAB :MatEMTP", IEEE Trans. on Power Delivery, vol. 12,no. 1, pp. 380-388, January 1997.[276] A. Gole and A. Daneshpooy, "Towards open systems: A PSCAD/EMTDC to MATLAB interface",Proceedings of IPST'97, pp. 446-451, June 22-26,1997, Seattle.[277] G. Wild et al., "An integrated simulation and controlimplementation environment", Proceedings of IPST'97,pp. 446-451, June 22-26, 1997, Seattle.[278] K. Vu et al., "Simulation tool for distribution-systemmodeling, analysis and algorithm testing", Proceedingsof IPST'97, pp. 446-451, June 22-26, 1997, Seattle.[279] J. Mahseredjian et al., "A link between EMTP andMATLAB for user defined modeling", IEEE Trans. onPower Delivery, vol. 13, no. 2, pp. 667-674, April1998.6. APPLICATIONS AND CASE STUDIES6.1 OVERVOLTAGE AND TRV CALCULATIONS[280] W. Diesendorf, Insulation Coordination in High8-12
Voltage Electric Power Systems, Butterworth, London,1974.[281] IEEE Seminar Report, "Power Systems TransientRecovery Voltages", 87TH0176-8-PWR.[282] CIGRE WG 13.02, "Interruption of small inductivecurrents", December 1995.[283] T. Sakurai, K. Murotani and K. Oonishi, "Suppressionof temporary overvoltages caused by transformer andAC filter inrush currents at the Shin-Shinano frequencyconverter station", IEEE Trans. on Power Apparatusand Systems, vol. 100, no. 4, pp. 1608-1613, April1981.[284] T. Adielson, A. Carlson, H.B. Margolis and J.A.Halladay, "Resonant overvoltages in EHVtransformers", IEEE Trans. on Power Apparatus andSystems, vol. 100, no. 7, pp. 3563-3572, July 1981.[285] F. Iliceto, E. Cinieri and A. Di Vita, "Overvoltagesdue to open-phase occurrence in reactor compensatedEHV lines", IEEE Trans. on Power Apparatus andSystems, vol. 103, no. 3, pp. 474-482, March 1984.[286] J.A. Halladay and C.H. Shih, "Resonant overvoltagephenomena caused by transmission line fault", IEEETrans. on Power Apparatus and Systems, vol. 104, no.9, pp. 2531-2539, September 1985.[287] O. Bourgault and G. Morin, "Analysis of harmonicovervoltage due to transformer saturation followingload shedding on Hydro-Quebec - NYPA 765 kVinterconnection", IEEE Trans. on Power Delivery, vol.5, no. 1, pp. 397-405, January 1990.[288] D.A.N. Jacobson, D.R. Swatek and R.W. Mazur,"Mitigating potential transformer ferroresonance in a230 kV converter station", 1996 IEEE Transmissionand Distribution Conference Proceedings, Los Angeles,September 15-20.[289] J.R. Harries and J.L. Randall, "Harmonic resonanceon parallel high voltage transmission lines", IEEETrans. on Power Delivery, vol. 12, no. 1, pp. 477-482, January 1997.[290] M.M. Adibi, R.W. Alexander and B. Avramovic(Power System Restoration WG), "Overvoltage controlduring restoration", IEEE Trans. on Power Systems,vol. 7, no. 4, pp. 1464-1470, November 1992.[291] Y. Rajotte, J. Fortin and G. Raymond, "Impedance ofmultigrounded neutrals on rural distribution systems",IEEE Trans. on Power Delivery, vol. 10, no. 3, pp.1453-1459, July 1995.[292] W.F. Long, "A study on some switching aspects of adouble circuit HVDC transmission line", IEEE Trans.Power Apparatus and Systems, vol. 92, pp. 734-741,March/April 1973.[293] B.R. Shperling and A. Fakheri, "Single-phaseswitching parameters for untransposed EHVtransmission lines", IEEE Trans. on Power Apparatusand Systems, vol. 98, no. 2, pp. 643-654, March/April1979.[294] B.C. Papadias, "The accuracy of statistical methods inevaluating the insulation of EHV systems", IEEETrans. on Power Apparatus and Systems, vol. 98, no.3, pp. 992-999, May/June 1979.[295] S.H. Sarkinen, G.G. Schockelt and J.H. Brunke,"High frequency switching surges in EHV shuntreactor installation with reduced insulation levels",IEEE Trans. on Power Apparatus and Systems, vol.98, no. 3, pp. 1013-1021, May/June 1979.[296] D. Bhasavanich et al., "Digital simulation and fieldmeasurements of transients associated with largecapacitor bank switching on distribution systems",IEEE Trans. on Power Apparatus and Systems, vol.104, no. 8, pp. 2274-2282, August 1985.[297] A.C. Legate, J.H. Brunke, J.J. Ray and E.J. Yasuda,"Elimination of closing resistor on EHV circuitbreakers", IEEE Trans. on Power Delivery, vol. 3, no.1, pp. 223-231, January 1988.[298] R.S. Bayless et al., "Capacitor switching andtransformer transients", IEEE Trans. on PowerDelivery, vol. 3, no. 1, pp. 349-357, January 1988.[299] J.R. Ribeiro and M.E. McCallum, "An application ofmetal oxide surge arresters in the elimination of needfor closing resistors in EHV breakers", IEEE Trans.on Power Delivery, vol. 4, no. 1, pp. 282-291,January 1989.[300] E.J. Michelis, "Comparison between measurement andcalculation of line switching with inductive andcomplex source", IEEE Trans. on Power Delivery, vol.4, no. 2, pp. 1432-1440, April 1989.[301] K.H. Lee and J.M. Schneider, "Rockport transientvoltage monitoring system : Analysis and simulation ofrecorded waveform", IEEE Trans. on Power Delivery,vol. 4, no. 3, pp. 1794-1805, July 1989.[302] G.T. Wrate et al., "Transient overvoltages on a threeterminal DC transmission system due to monopolarground faults", IEEE Trans. on Power Delivery, vol.5, no. 2, pp. 1047-1053, April 1990.[303] K.C. Lee and K.P. Poon, "Statistical switchingovervoltage analysis of the first B.C. Hydro phaseshifting transformer using the ElectromagneticTransients Program", IEEE Trans. on Power Systems,vol. 5, no. 4, pp. 1054-1060, November 1990.[304] B.C. Furumasu and R.M. Hasibar, "Design andinstallations of 500-kV back-to-back shunt capacitorbanks", IEEE Trans. on Power Delivery, vol. 7, no.2, pp. 539-545, April 1992.[305] F. Iliceto, F.M. Gatta, E. Cinieri and G. Asan, "TRVsacross circuit breakers of series compensated lines.8-13
Page 1 and 2: BIBLIOGRAPHY ON MODELING AND ANALYS
Page 3 and 4: [43] J.R. Marti and J. Lin, "Suppre
Page 5 and 6: [89] B. Gustavsen and A. Semlyen, "
Page 7: [138] L. Bohmann et al., "Impedance
Page 10 and 11: torsional dynamics simulation in th
Page 15 and 16: Power Delivery, vol. 11, no. 2, pp.
Page 17 and 18: 3, no. 4, pp. 2005-2011, October 19
Page 19 and 20: vol. 10, no. 3, pp. 1649-1656, July

bibliography on modeling and analysis of systems transients using

Create successful ePaper yourself

Delete template?

Save as template?