For more informations, download pdf file - Profilt

Espace d’activités Kermelin-nord - rue Lavoisier - 56890 SAINT-AVÉ - FRANCEService export : TEL : (33) 2 97 60 68 33 - FAX : (33) 2 97 27 90 25Site web : www.profilt.netFILTRATIONTECHNICALDOCUMENTATIONSPRAY BOOTH EXTRACTION FILTER(Cardboard combined with glass fibre)PROCART MCurrently the best filter on the market,the idea behind the PROCART seemssimple when you think of it now. PROFILT in collaborationwith a paint booth manufacturer has combinated the 100% natural standard PROCART filter with a glass fibre filter,so combining a high retention capacity with a significantlyfine filtration. It can be used just as well in verticalor horizontal ventilation systems.DÉSIGNATIONWith the same concept as the 100 % natural standard PROCART filter, it has the same advantageof a paint overspray retention capacity of 15Kg /m2, thus higher than classic filters.The PROCART M filter can be used for all types of paint, including powder, varnish, lacquer...DETAILED FITTING INSTRUCTIONSTo ensure optimum efficiency, it is essential to fit the PROCART M filter as described below :Spread the filter out in front of the spray booth, small folds towards you.Arrange the folds at regular intervals of 25 folds per linear metre (50 folds per metre to filter dryresidue).The first fold should be fixed to the left side lateal jamb of the opening and the last fold to theright side lateral jamb.The filter should be supported at the top and the bottom against a wall at least 25 mm high toavoid the filter being swept away by the air flux; the filter should therefore be at least 50 mmhigher than the booth.The speed of the air flux should not exceed 1 metre /second. If, when filling with paint, the filtertends to fall forwards because the air flow is not strong enough to keep it in place, insert theupper part of the filter into a U- shape above the opening of the booth (see diagram).Please note that having at least 25 folds per linear metre is essential for optimum efficiency.The PROCART M spray booth filter has the highest performance on the market.FILTRATION

Espace d’activités Kermelin-nord - rue Lavoisier - 56890 SAINT-AVÉ - FRANCEService export : TEL : (33) 2 97 60 68 33 - FAX : (33) 2 97 27 90 25Site web : www.profilt.netFILTRATIONTECHNICALPROCART MSPRAY BOOTH EXTRACTION FILTER(Cardboard combined with glass fibre)DOCUMENTATIONCHARACTERISTICSDEPTH --------------------------------------- : 57 mmRECOMMENDED AIRSPEED ----------------- : 0.5 to 1M/SDEPRESSION -------------------------------- : 0.50 M/S 13 PA0.75 M/S 30 PALOSS OF LOAD - NEW STATE---------------- : 0.5 for 0.75 m/s (20PA)(in mm of water stream)MAXIMUM LOSS OF LOAD ----------------- : 9 for 0.75 m/s (155 PA)(in mm of water stream)Contrary to other filters, The PROCART M increases in efficiency as it fills with paint; depending onthe quality of the paint, efficiency reaches 99.3 % (high solids).PACKAGINGSTANDARD SIZES 0.75 0.90 1by 10 METERS by 10 METERS by 10 METERSOTHER SIZESplease consult usNUMBER OF CARDBOARD FILTERS ON EACH PALLET 50ASSEMBLY FOR PROCARTAND PROCART M FILTERSFILTRATION