miros - Zumtobel

MIROS AESTHETICS & PERFECTION 9Highly specular surfaceExclusively directional reflection of light.Outside the light cone, the reflector appears“dark”.Mounting methodThe reflectors are practicallymaintenance-free, and can befixed onto any standard supportingsurface because of their lowintrinsic weight.The mounting plate is made ofdie-cast aluminium in RAL 9006,with two fixing points, and threepointsupport. Comes with ascrew-in suspension tube of variouslengths to suit the reflectordiameter.AdjustmentThe reflectors are easy to alignand secure. The reflector angleis adjusted via a ball-and-socketjoint integrated into the suspensiontube, and can be fixed witha screw. The risk of the reflectorshifting out of alignment is minimal,even during cleaning.Semi-matt surfaceSlightly diffuse component of reflected lightfor soft transitions. Luminance levels areperceptible on the reflector even with obliquelight incidence.Perforated sheet steel opticSame properties as for semi-matt versionbut with 20 % transmission component.Light for brightening up the ceiling and throwingsoft shadows behind the reflector.