cat. 6a f/UtP cable for local area networks 4 pairs and 2 x 4 pairs
cat. 6a f/UtP cable for local area networks 4 pairs and 2 x 4 pairs
cat. 6a f/UtP cable for local area networks 4 pairs and 2 x 4 pairs
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
87045 LIMOGES CedexTelephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88Cat. 6A F/UTP <strong>cable</strong> <strong>for</strong> <strong>local</strong> <strong>area</strong> <strong>networks</strong>4 <strong>pairs</strong> <strong>and</strong> 2 x 4 <strong>pairs</strong>Catalogue number: 327 78/328 781. USECat. 6A <strong>cable</strong>s with 4 <strong>pairs</strong> <strong>and</strong> 2 x 4 twisted <strong>pairs</strong>, 100 ohms veryhigh speed, <strong>for</strong> horizontal floor or backbone distribution. These <strong>cable</strong>senable the use of protocols supported by Class EA <strong>for</strong> 10G Base-Tappli<strong>cat</strong>ions. They are characterised up to 500 MHz.2. DESCRIPTION1. Conductor: Bare solid copper, 23 AWG2. Type of insulation: PE with low dielectric loss3. Separator: Specially designed to optimise NEXTper<strong>for</strong>mance4. Tape: Synthetic <strong>and</strong> water-repellent; ensures stabilityof the structure <strong>and</strong> per<strong>for</strong>mance after laying5. Screen: Aluminium/polyester; ensures optimum ANEXTper<strong>for</strong>mance6. Continuity: Tinned copper wire; <strong>for</strong> earthing on 9-pinconnector7. Type of sleeve: Low smoke zero halogen flame retardantmaterial3. marking of Legr<strong>and</strong> <strong>cable</strong>s- Legr<strong>and</strong>- Catalogue number- Number of <strong>pairs</strong>- Gauge- Type- Impedance- Type of sleeve- Category- Con<strong>for</strong>mity to st<strong>and</strong>ards- VPN/NVP- Batch number- Measurement (remaining length)4. PERFORMANCE at 500 MHz (st<strong>and</strong>ard EIA/TIA 568-C.2)Maximum attenuation (dB/100 m):................45.3Minimum NEXT (dB):....................................33.8PS NEXT (dB):..............................................31.8ACRF (dB / 100 m):........................................13.8PS ACRF (dB / 100 m):..................................10.8Return Loss (dB):..........................................15.2Note:The conductive part of the shielding is inside (wire side).Technical data sheet: F00989EN/01 Updated on: 03/03/2011 Created on: 28/09/20091/2
Cat. 6A F/UTP <strong>cable</strong> <strong>for</strong> <strong>local</strong> <strong>area</strong> <strong>networks</strong>4 <strong>pairs</strong> <strong>and</strong> 2 x 4 <strong>pairs</strong>Catalogue number: 327 78/328 785. TECHNICAL AND MECHANICAL FEATURES7. ORDERING INFORMATIONCatalogue Number 032778 032878Type F/UTP F/UTPType of sleeve LSOH LSOHNumber of <strong>pairs</strong> 4 2 x 4Assembly Pairs PairsDiameter over insulation (mm) 1.16 ± 0.05 1.16 ± 0.05Cable diameter (mm) 7.3 ± 0.3Weight of <strong>cable</strong> (kg/km) 51 57Min. bending radius when laying (mm) 60 60AWG gauge 23 23Catalogue number 327 78/328 78TypeF/UTPColour Yellow RAL 1018Pack (m) 500Packaging8. ENVIRONMENTAL FEATURESStorage <strong>and</strong> transport temperature: 0 to + 50°CUsage temperature: – 20 to + 60°CFire resistance: IEC 60332-1, UL VW-1Reel6. Electrical features AT 20°C9. STANDARDS AND APPROVALSCatalogue number 327 78 328 78Type U / UTP F / UTPMaximum linear resistance of the <strong>cable</strong>(ohm/km)95 * 95 *Cat. 6A, 500 MHzEIA/TIA 568-C.2EN 50173EN 50288-2.1IEC 11801IEC 61156-5DC dielectric strength1 kV/1 min *1 kV/1 min *Minimum insulation resistance (Mohm.km)5000 5000Minimum propagation speed (marked on<strong>cable</strong>)> 66% > 66%Characteristic impedance from 1 to 100MHz100 Ω± 15%100 Ω± 15%* According to st<strong>and</strong>ard IEC 61156-5Technical data sheet: F00989EN/01 Updated on: 03/03/2011 Created on: 28/09/20092/2
Change language