AIRGARD - Angus Air

AIRGARDSize RangeSpigot Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ref. SUnits supplied with 40/50 mm square/rectangular spigotsMode A Size Range: 100 - 1000 wide, 100 - 1000 mm highMode B Size Range: 100 - 2500 wide, 100 - 2000 mm highFlanged Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ref. FUnits supplied with 35mm (Mode A) or 50mm (Mode B) Flange connectionswith elongated slots in each corner to suit Ductmate, Mez and Doby profiles.Mode A Size Range: 100 - 1000 wide, 100 - 1000 mm highMode B Size Range: 100 - 2500 wide, 100 - 2000 mm highCircular spigot Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ref. CUnits supplied with 40/50mm deep flat oval spigot.Mode A Size Range: 100 - 1000 mm diaMode B Size Range: 100 - 2000 mm diaFlat Oval Spigot Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ref. OUnits supplied with 40/50mm deep flat oval spigot.Mode A Size Range: 100 - 1000 wide, 100 - 900 mm highMode B Size Range: 200 - 2500 wide, 100 - 2000 mm highIntermediate Sizes and Multiple Units also available on requestOrderingSpecificationSERIESMode A: AGAMode B: AGBSpigoted. . . . . . . . .SFlanged. . . . . . . . .FCircular Spigot. . . .COval Spigot. . . . . . O(mm)AGAManual. . . . . . . . . . . . . . . .MOAuto Extended Spindle. . . .AOAuto Motorised. . . . . . . . . .EOAuto Pneumatic. . . . . . . . .POMotorOptionsEngineeringSpecificationCasingLeakageOpen/Close: 24v AC/DC= SM24A or 240V AC = SM230ASpring Return: 24v AC/DC = AF24 or 240v AC = AF230Modulating Spring Return: 24vAC/DC = AF24-SRModulating Open/Close:24v AC/DC = SM24A-SR 240v AC SM230 ASRAll extruded aluminium frame with extruded aluminium aerofoil blades, allto BS 1470 -1474. Blades operated through patented rack and pinionmechanism. Special spigotted cast gears in zinc based alloy to BS 1004A,run in sealed nylon bearings.Conforms to DW142 Class A and B. Units available to meet Class C onrequest.ContactGILBERTSHead Office and WorksGILBERTS (BLACKPOOL) LTDGilair Works, Clifton Road,Blackpool.Lancashire FY4 4QT.Telephone: (01253) 766911Fax: (01253) 767941e-mail: sales@gilbertsblackpool.comWeb: www.gilbertsblackpool.comGilberts (Blackpool) Ltd reserve the right to alter the specification without notice. The information contained in this leaflet is correct at time of going to press © 2007.