Seiko 7X52 setting instructions (Adobe PDF file) - Right Time Watches

8TROUBLESHOOTINGASTRON 7X52 GPS SOLARCONTENTSSet the time (0)When operation isPress Button B or C to adjust theSet the time by8completed, press Button Aindicator hand as shown in the figure 9 10 receiving GPS signalsand then release itAfter operation of 1 to 9 iscompleted, make sure to set thetime.Adjust the indicator hand to theposition as shown in the figure.‣ If the indicator hand points as shown in thefigure, go to operation of 9.Slightlymoves thehandclockwiseIf the button is kept pressedfor 2 seconds, the handmoves continuously.Press the button again tostop the hand.Slightlymoves thehandcounterclockwise‣ The indicator hand makes one complete turn,but this does not mean a failure.The mode to adjust thepreliminary position is completed,and the second hand and hour/minute hands start moving.Button AWhen you are in a place where GPS signals can be easilyreceived (P. 13), adjust the time zone. How to adjust the time zone P. 14 ~ 16If GPS signals are received after the systemreset, leap second data are also received. P. 30When you are in a place where GPS signals cannot be received1 Carry out manual time zone setting How to manually set the time zone P. 202 Manually set the time How to manually set the time P. 433 Manually set the date How to manually set the date P. 44When the time and date are set, operation is completed.‣ If no operation is performed for more than 1 minute or when Button A ispressed once, the watch returns to the time display mode.When the watch has returned to the time display mode, restart operation.50