Product Features and Specifications - Ingersoll Rand

BP 5959450 SIN LE NOBLEFRANCETEL: +33 (0)3 27 93 08 08FAX: +33 (0)3 27 93 08 00Copyright © 2003All Rights Reserved805 maxi585295Lifting lugO35F.R.L blockUPDOWN= 560 =4 holes O 18Winch mounting384LS2-150RLP-L-EAIR POWEREDMAN-RIDING WINCH313Ropeentry28°Slack wiredetectorAir inletO3/4"BSPLimitswitches3 waysvalveEmergencyinletO3/4"BSPPress rollerLifting lugO35779420 183300 86INTERNAL IR REFERENCE76470001DOCUMENT NUMBER0 5 / 0 4 / 0 4 D 1/1Faillon JLENGINEERING MANAGERO 342O 450Specifications :- Rated working load : 150 kg- Lifting speed (with rated load) : 0 to 30 m/min at6.3bar/90PSI- Free air consumption : 0 to 2.5 Nm3/min- Working pressure range : 5 to 7 bar- Recommended rope diameter : 10 mm- Weight without rope : about 210 kg- Working rope capacity : 54 m on 2 layers- Total rope storage capacity : 154 m on 5 layersStandard Features / Equipment :- Two independent auto brakes: an internal multidiscbrake and external drum band brake.- Throttle lever returns to off position and locks whenreleased- High efficiency planetary gearing is inside drum forbetter protection and minimum overall dimensions- Overload protection device (torque limiter)- Main air emergency stop- Pre-equipped emergency lifting or lowering device(pressurised nitrogen bottle not supplied)- Slack wire detector- Upper & lower limit switches (accuracy : ± 10 cm)- Assisting spooling device – for better rope windingat no load- Drum guard- Grooved drum (for wire rope ∅ 10 mm)- Filter – Regulator – Lubricator- Sandblasting and offshore paint 290 µ- Installation and operation manual- DNV type approved and CE certification- Design temperature TD = -20° COn Request :(Dwg.D6470639)- 3.1b material traceability certificates according toDIN 50049 (EN 10204) for load bearing parts- Witness test by Third Party (DNV, Lloyd’s, ABS,etc)The equipment described on this sheet is subject to the general sales and warranty conditions of INGERSOLL-RAND company. Because of the constantevolution of technology INGERSOLL-RAND company reserves the right to modify without notice the specifications contained in this document.