SLC Series One Plus QuickStart Card - AEC - AEC, Inc.
SLC Series One Plus QuickStart Card - AEC - AEC, Inc.
SLC Series One Plus QuickStart Card - AEC - AEC, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SRL, <strong>SLC</strong>, & SRIL <strong>Series</strong> Hopper Loaders – <strong>Series</strong> <strong>One</strong> <strong>Plus</strong> ControlReference Manual (PN: A0556539) for CompleteOperation and Installation Instructions(Available online at www.aecinternet.com)Quickstart Installation Checklist(Refer to main manual for complete installation instructions).1. Mount hopper mounting flange to machine bin or feed throat, using rivets if possible.2. Ensure that unit is level for proper operation.3. Attach flex hose to unit and pickup wand. Secure with hose clamps.4. Attach clean, dry 80-120 psi air.5. Plug unit into grounded three-prong receptacle.Unit Operation(Refer to main manual for complete operating instructions).1. Insert pickup wand into desired material.2. Press the START/STOP key.Note: The hopper loader loads itself until full, then dumps and repeats.It pauses only when the machine bin below is full.3. To stop the unit from loading, press the START/STOP key.For Proportioning Models1. Insert pickup wands into desired materials.2. Press SCROLL key repeatedly until screen displays “3”.3. Press the START/STOP/SELECT key to select the “% of MAT’L B” menu.4. Use the UP and DOWN keys to set the desired % of Material B.5. Press the START/STOP/SELECT key to set this value.6. Press the START/STOP/SELECT key again to start the hopper loader.<strong>AEC</strong>, <strong>Inc</strong>. Part No: 882.00348.001100 Woodfield Road • Suite 588 • Schaumburg, IL 60173 USA Bulletin No: CV1-305.3Tel. 847.273.7700 • Fax 847.273.7804
SRL, <strong>SLC</strong>, & SRIL <strong>Series</strong> Hopper Loaders – <strong>Series</strong> <strong>One</strong> <strong>Plus</strong> ControlReference Manual (PN: A0556539) for CompleteOperation and Installation Instructions(Available online at www.aecinternet.com)Spare Parts Location(See next page for Spare Parts List)<strong>AEC</strong>, <strong>Inc</strong>. Part No: 882.00348.001100 Woodfield Road • Suite 588 • Schaumburg, IL 60173 USA Bulletin No: CV1-305.3Tel. 847.273.7700 • Fax 847.273.7804
SRL, <strong>SLC</strong>, & SRIL <strong>Series</strong> Hopper Loaders – <strong>Series</strong> <strong>One</strong> <strong>Plus</strong> ControlReference Manual (PN: A0556539) for CompleteOperation and Installation Instructions(Available online at www.aecinternet.com)Spare Parts List(See previous page for Spare Parts Location)Part Variation SRL/SRIL 01 SRL/SRIL 02/04 <strong>SLC</strong> 02/04 <strong>SLC</strong> 08/16Filter31Polyester Glazed(Standard)A0565928 A0565929 A0565930Nylon (Optional) A0565931 A0565932 A0565933Motor25Solenoid30Throat Gasket53Material LevelSensor17Pickup WandAssembly115V A0542189 W00020081Spare BrushesW00020083230V A0542190 W00020082Spare Brushes115V230VStandard Temp(Black)High Temp(Orange)FDA Grade(White)SwitchMagnetWandHoseHose ClampN/AN/AN/ASRIL – N/ASRL - A0556805N/AW00020176A0556547A0556808A0533933W00017594W00001917Version 1 – N/AVersion 2 - W00012559Version 1 – N/AVersion 2 - W00018024Version 1 – N/AVersion 2 - W00016136Version 1 - A0563514Version 2 - A0533925Version 1 - A0563515Version 2 - A0533924Note:Refer to the main manual for a complete Spare Parts List.<strong>AEC</strong>, <strong>Inc</strong>. Part No: 882.00348.001100 Woodfield Road • Suite 588 • Schaumburg, IL 60173 USA Bulletin No: CV1-305.3Tel. 847.273.7700 • Fax 847.273.7804
SRL, <strong>SLC</strong>, & SRIL <strong>Series</strong> Hopper Loaders – <strong>Series</strong> <strong>One</strong> <strong>Plus</strong> ControlReference Manual (PN: A0556539) for CompleteOperation and Installation Instructions(Available online at www.aecinternet.com)Troubleshooting – Quick GuideProblem Possible Cause SolutionNo LED display<strong>AEC</strong> is displayedat power-up, butvacuum motordoesn't start whenthe START/STOPkey is pressed.Control appears towork, but vacuumnever starts.Hopper does notfill completelyProximity switchtrips before tank isfullProportioningvalve doesn't shift(PP models only)No power to control boxPower switch is offExternal fuse 1FU is blownInternal fuse FU2 is blownTB1 is disconnected/looseLoose wiring in controlBin full sensor switch is trippedMisaligned bin full sensor switchmagnetBin full sensor switch wiring isloose/disconnectedPickup wand not adjusted for materialflow characteristicsFilter is dirty/cloggedVacuum motor unpluggedVacuum time set to zero (0) on Menu1Solid-state relay has failedWand not properly positioned inmaterial supplyVacuum time is set too lowPickup wand not adjusted for materialflow characteristicsFilter is dirty/cloggedMaterial residue buildup on proximitysensorProximity sensor sensitivity is set toohighControl wiring connections on circuitboard are loose.No compressed airDefective valve or solenoidTB1 is disconnected/loosePlug in power cord. Check main disconnect.Turn ON control box.Replace fuse 1FU.Replace fuse FU2.Reconnect or tighten TB1.Check/tighten controller wiring.Wait for machine bin material level to drop, thenrestart the hopper loader.Realign magnet.Repair the wiring fault.Adjust material probe to compensate for material -see manual for more information.Clean/replace filter as needed.Plug in vacuum motor.Reset Menu 1 to an appropriate time.Replace solid-state relay.Adjust material wand at material pickup point.Set Menu 1 to an appropriate value.Adjust material probe to compensate for material -see manual for more info.Clean/replace filter as needed.Clean proximity sensor.Reduce sensitivity of sensor.Secure connections on circuit board.Connect to 80psi air supply.Repair or replace as needed.Tighten TB1 connections.<strong>AEC</strong>, <strong>Inc</strong>. Part No: 882.00348.001100 Woodfield Road • Suite 588 • Schaumburg, IL 60173 USA Bulletin No: CV1-305.3Tel. 847.273.7700 • Fax 847.273.7804
Change language