Rabbit Snares - Prepperlinks.net

Hazel TealerJig Tealer Shape Tealer with snareA hazel tealer is simple. Cut an approx 1' length of straight hazel , about 1/2" thick,sharpen at one end and make a 2"split with a sharp knife at the other. Set the noose toabout 7" to 8" wide and 5" to 6" high, then just behind the eyelet, jam the snare wireinto the split and push stick into ground. Fasten the other snare loop to a stout peg bysome non-slip cord.Noose heightWhichever tealer you are using, when setting the snare, ensure that the loop is about7" to 8" wide and 5" to 6" high and about 5" to 6" off the ground, so that the noosecover the maximum width of the track.