AHM - TimeTech GmbH
AHM - TimeTech GmbH
AHM - TimeTech GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>AHM</strong><br />
TIM part No 10351<br />
Electrical Interfaces<br />
Sine outputs and 1 Pulse per second output<br />
The four sine outputs of the Maser consist of two 5 MHz signals (type “N” connectors), and two<br />
100 MHz signals (type “N” connectors). These outputs are DC decoupled.<br />
Output Level<br />
(50 ohm)<br />
Copyright © 03/2006, <strong>TimeTech</strong> <strong>GmbH</strong><br />
Data subject to change without notice.<br />
24 Mar 2006<br />
Page 4 of 5<br />
Isolation<br />
(between<br />
outputs of the<br />
same<br />
frequency)<br />
Spectral<br />
purity<br />
(2nd harmonic) Close-in<br />
spurs<br />
(Δf < 100 kHz)<br />
Spectral purity<br />
Non<br />
harmonic<br />
related<br />
spurs<br />
5 MHz (2 outputs) ≥ 12 dBm ≥ 60 dB ≤ -40dB ≤ -120 dB ≤ -105 dB<br />
100 MHz (2 outputs) ≥ 11 dBm ≥ 60 dB ≤ -40dB ≤ -110 dB ≤ -90 dB<br />
Table 5 : Sine output signals: 5 and 100 MHz<br />
A “one pulse per second” (1 PPS) signal characteristics is also available (type “BNC” connector):<br />
Connector type: BNC<br />
Frequency output: 1 Hz<br />
Output impedance: 50 Ohm<br />
Output levels: TTL<br />
Rise and fall time: