Agentase CAD-Kit data sheet - FLIR.com

PRODUCT OVERVIEWCHEMICAL AGENT POINT DETECTIONThe Agentase CAD-Kit provides first responders withthe ability to conduct surface, solid and liquid interrogationof nerve (G&V series), blood (AC) and blister (HD)agents, acids, bases, aldehydes and oxidizers. This kitprovides accurate results in field environments, improvesdetection limits to rival those of expensive handheld electronictesting devices and provides fast signals that areeasy to interpret. The simplicity of this kit makes it userfriendlyfor the entire first responder community. Unlikeother field detection equipment, the Agentase CAD-Kithas extremely low rates of false positives and negatives.The Agentase CAD-Kit accurately and rapidly characterizesunknown samples in the field. While sensors are usedto directly look for low levels of agent contamination onsurfaces, the Agentase CAD-Kit also includes a samplingdevice for unknown solids and liquids. The samplingdevice is used to collect a field sample and dispense aportion of the collected sample to each of the sensors.INDIVIDUAL SENSOR 5 PACKSOnce a responder has identified the agent present usingthe Agentase CAD-Kit, individual sensors can be employedto verify the contamination of people, equipment andthe environment. In addition, individual sensors can beused for testing post decontamination to confirm processefficiency and prevent cross contamination. Individualsensors can be ordered in packs of five.FEATURES• RELIABLE — More selective than any existingfield detection equipment• SIMPLE — Easy to train. Easy to use. Eliminatesneed for reading directions in the hot zone• RAPID — Produces easy to interpret resultswithin 5 minutes of sampling• CAPABLE — Ability to perform direct surface,unknown solid and unknown liquid interrogation• COST EFFECTIVE — Accuracy, value and pricemake the Agentase CAD-Kit the most costeffective chemical agent detection tool on themarket today

TRAINING PRODUCTSFLIR provides training tools suitable for classroom, hospital,field disaster drills and decontamination verification. Oursimulant product allows instructors to simulate agent releaseand victim or equipment contamination as well as verifyingdecontamination efficiency. These kits utilize training pensthat are used in the same manner as our Agentase CAD- Kitsensors. We offer various training kits that are configured to beeffective in all training environments and designed around thenumber of student participants.SPECIFICATIONSAgentase CAD-Kit6 sensors for CWA and TICdetection: Nerve, Blood, Blister,Acid/Base, Aldehydes, Oxidizers,Sampler, Instruction CardFootprint/Weight2 in x 5 in x 9 in / < 1 lbStorageStore at room temperature andout of direct sunlight. Storageat elevated temperatures reducesshelf life. Time/temperatureindicators reflect improper storageconditions.Operating EnvironmentOperates in most environments,would require light in darkenvironmentsHumidity 0 to 100%TemperatureInterference ResistanceOperator RequirementsStart Up TimePower RequirementsSensor ResponseCalibration RequirementsTime Required for TrainingProjected MaintenanceService and Warranty32°F to 113°F (0°C to 45°C)Resistant to commonenvironmental interferentsOne user: No special skills required0.5 minutes by 1 personNoneColorimetricNone5 minutes or lessNone1 year parts and labor;2 year shelf lifeThe Americas2100 Crystal DriveSuite 650Arlington, VA 22202T +1. 877.692.2120Middle EastSuite 1-11Building 6E-ADubai Airport FreezonePO Box 371363Dubai, UAET +971 4 701 7195F +971 4 701 7194EuropePiepersberg 1242653 SolingenGermanyT +49 212 222090F +49 212 201045AsiaLevel 28 Gateway East152 Beach RoadSingaporeT +65.6827.9789F +65.6295.2567CADKIT_012711Consumables RequiredNonewww.flir.com/detection