SB Series Field Plates 1.1 SB Series Field Plates 1.1 - Jands

T E C H N I C A L S P E C I F I C A T I O N S H E E TSB Series Field Plates 1.2ARCHITECTS AND ENGINEERS SPECIFICATIONPLATES FOR SB SERIESTERMINATIONS SYSTEMThe connector field plate shall be made of 1.6mm aluminium,anodised black and linished. The one unit plate shall be 127mm highand 84mm wide. The two unit plate shall be 127mm high and 148mmwide. The connector field plate shall be designed to suit the Jandsrange of SB Wall Boxes and the connector plate shall form part of theJands SB Series Field Plates.(UNIT: mm)85 4∅4.842.542.542.5PLATES FOR SB SERIESTERMINATIONS SYSTEM1281149696649664433263▲ Dimensions for one unit platewith four mounting holes.4322636443▲ Single connector on oneunit plate for BNC, DIN,RJ45 and D25 types.226364▲ Two connectors on oneunit plate for BNC, DIN,RJ45, 1RJ45 +1D25 andD25 types.43226343▲ Three connectors on oneunit plate for BNC type.226396969696▲ Four connectors platefor BNC and 2AXR+2DIN types.42.5▲ GPO plate.6223▲ Five connectors platefor BNC type.42.585.5▲ Three connectors on oneunit horizontal plate for2AXR+1BNC types.▲ Six connectors on oneunit plate for 5BNC+1D15types.Jands Electronics Pty Ltd 40 Kent Road Mascot NSW 2020 AustraliaPhone: (02) 9582 0909 Fax: (02) 9582 0999 Internet: jandsinfo@jands.com.au11482.58∅ 4.8▲ Three connectors on oneunit plate for 1AXR+2BNCand 2AXR+1BNC types.14882.5170▲ 4 inch speaker plate.128SB Series Field Plates 1.2TSS-SB Plate2-9611-02Specifications subject to change without notice. Manufactured by Jands Electronics Pty Ltd ACN 001 187 837.Note: While all due care has been taken in the preparation of this document, Jands Electronics shall not be liable for any inaccuracies or omissions which may occur herein.