Event Plus 60 Technical Specification Sheet (503.4 KB - Jands

F4 F5 F6 F7 F8 F9 F10 F11 F12REVERSENORMALSAMPLECLEARHOLDASSIGNADDLATCHSOLOOFFD.B.O.INHIBITOFFT E C H N I C A L S P E C I F I C A T I O N S H E E TEvent Plus 60DESCRIPTIONThe Event Plus 60 lighting control console combines all the advantagesof computer based control while maintaining the operational easeand efficiency of individual channel and master faders. The ability to'build' memories is available on the console, making the operation ofconventional or moving lights smooth and intuitive.FEATURES* DMX 512 output to control dimmers, moving lights and colourscrollers* Wide mode doubles the number of channel faders to 96 channels* Assign masters can act as scene masters as well as control chasesand theatre-style timed crossfade stacks* Ability to instantly assign, crossfade and modify any item* User definable files combining memories/chases/stacks* Can be fitted with a range of optional accessories including analogueoutputs, memory storage card, VDU output, floppy disk driveand desk lights* Superwide facility up to 252 channels* Timed crossfades in 0.1 second increments* Three (3) softpatch tables to 512 DMX channels* Pages can contain memories and chases* Chase options including dipless steps* Cue linking for show automation* MIDI control of playback* Fast programming of memories* Multiple playback facilities* Solo safety * Function keys to automate tasks* Password protection * Channel preheat* 5 option ports (back panel)* Console linking to JANDS STAGE / ESP II / EVENT / EVENT PLUSconsoles* CE approved: EN50081-1, EN50082-1, EN60950*60/120 CHANNELS / 24 ASSIGN MASTERSMEMORY LIGHTING CONTROL CONSOLEPRESET 110864201086420PRESET 2108108OVERALL SPECIFICATIONSControl channels: 60 (normal), 120 (wide), 252 (superwide)Assign masters: 24Memory:128 KbytesPower supply: Universal 100~240VAC ±10% , 47~63 HzConsumption: 40W typicalConnector: IEC 3-pin with integral fuse, switch and mainsfilterFuse:2A M205/240VMIDI in:5-pin DIN socketDMX out:USITT DMX-512/1990 protocol (RS-485standard)/ AXR 5-pin socketAnalogue out: 0 ~ +10V DC/ Socapex 337 socket (option)Desk lamp out: 2 12V current limited, AXR 3-pin socket,10W max.Displays:4 32 character, 2 line LCD, green backlightDimensions: 1500mm (W) 530mm (D) 110mm (H)Net/shipping weight: 27/40 kgSUPPLIED ACCESSORIES• 2m IEC to Clipsal 463 power cable (export models may vary)• Operating manualORDERING INFORMATIONMODEL/PARTPART NO.• Event Plus 60• M-card module• VDU interface/M-card module• M-card• Floppy disk drive module (DOS format)• Analogue output module• Desk lamp• FlightcasePRESET 110864201081086420PRESET 2108JND-EVENT60PJND-OPVM-OPMJND-VGAJND-MCARDJND-OPFD-EVENTPJND-OPA60CAE-18XR/CAE-18XR-HiJND-FC-EVENT60PLUS108642010860/120 CHANNELS / 24 ASSIGN MASTERSMEMORY LIGHTING CONTROL CONSOLE666664444422222Oa b c d e f g h i j26 27 28 29 30 31 32 33 36 37 38 39 40 41Z k l m n o p q r s t u v34 35 42 43 44 45 46 47 4886 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108BACKGOBACK10 ASSIGN 10MASTERS8866442200CROSSFADEGOBACKGOBACKGO0BACKADDSOLO10864200CURSORVALUEEvent Plus 607MEMORY41OFFPAGEPATCHEXIT85EDITASSIGN2CLEAR0SETUP9CHASE63ONFILESTACKRECORD1086420SLOWRATEFASTP1 P2 MASTER0ADDSOLO0*_49 50 51 52 53w x y z / | \54 55 56 57 58 59 60109 110 111 112 113 114 115 116 117 118 119 120ADDSOLOGRANDMASTER10864200ADDSOLOEvent Plus 60

108642010864201086420108642010864201086420108642010864201086420*_10864201086420F110864201086420108642010864201086420108642010864201086420108642010864201086420741852096310864201086420108642010864201086420ADDOFFOFF1086420\*10864201086420T E C H N I C A L S P E C I F I C A T I O N S H E E TEvent Plus 6060/120 CHANNELS / 24 ASSIGN MASTERSMEMORY LIGHTING CONTROL CONSOLEARCHITECTS AND ENGINEERS SPECIFICATIONSElectronicsThe lighting console shall provide control of up to 60 dimmer channels(120 in wide mode, 252 in superwide) via the industry standard USITTDMX-512/1990 protocol. The DMX output socket on the back panelshall be a 5-pin AXR. The output voltages shall conform to standardRS-485 balanced serial data transmission.The console shall have a MIDI In connection, the socket being astandard MIDI 5-pin DIN connector.The console shall have two preset faders and a flash button perchannel to allow direct manual control of stage lighting intensity. Theflash button shall house a light emitting diode (LED) to indicatechannel output level.The console shall utilise four (4) liquid crystaldisplays (LCDs) to provide parameter and editinginformation to the operator.The console shall have a memory capacity ofat least 128 Kbytes and shall be batterybackedto prevent memory loss whenswitched off. The battery shall have a life of atleast four (4) years.The console shall incorporate designtechniques and electronic filters to complywith the new Australian and European Uniondirectives on electrical safety and electromagneticcompatibility (EMC) (CE approved:EN50081-1, EN50082-1, EN60950).OperationThe console operating software shallincorporate diagnostic test routines thatexercise the different systems on the CPUcard. These test routines shall indicate to theoperator (using LEDs and/or displays) theresult (pass/fail) of the tests.The console shall display an error message tothe operator should the software malfunctionor be corrupted.ElectricalThe console shall operate from a single-phasesupply of 100 volts to 240 volts AC ±10%,with a supply frequency of 47 to 63 Hz.The console shall not draw more than 50 wattsof power from a normal GPO. The power inletshall be a switched and filtered IEC mainssocket with integral fuse, and shall be locatedon the back panel of the console.The console power supply shall be auniversal-type switched mode supplyrequiring no changing of internal links toaccommodate different supply voltages.MechanicalThe console shall be designed to be freestanding.The console shall be 1500mm wide 530mmdeep 110mm high.The console shall be constructed of 1.2mmsteel, and shall be provided with a removable1.2mm aluminium base for access to internalelectronics. All metal surfaces shall beproperly treated and finished in powdercoator zinc dichromate passivating.The control surfaces shall be scratchresistant0.25mm Lexan with legends reversesilkscreen printed from behind.PLUSPRESET 1PRESET 1PRESET 1PRESET 1Jands Electronics Pty Ltd 40 Kent Road Mascot NSW 2020 AustraliaPhone: +61 (0)2 9582 0909 Fax: +61 (0)2 9582 0999 Internet: jandsinfo@jands.com.auPRESET 2PRESET 2PRESET 2PRESET 2The sides and front arm rest of the console shall be constructed ofsteel-reinforced injection-moulded synthetic rubber.All operator controls and displays shall be provided on the top operatingsurface of the console.The chassis shall have sufficient ventilation holes to allow adequateconvection cooling of the power supply, provided the ambienttemperature does not exceed 40˚C (104˚F).The console shall be factory tested and cyclically burned-in for aminimum of 24 hours.The lighting control console shall be the JANDS EVENT PLUS 60.530 mmSpecifications subject to change without notice. Manufactured by Jands Electronics Pty Ltd ACN 001 187 837.Note: While all due care has been taken in the preparation of this document, Jands Electronics shall not be liable for any inaccuracies or omissions which may occur herein.ADDSOLOADDSOLOADDSOLOY 25 Z 26 a 27 b 28 c 29 d 30 e 31 f 32 g 33 h 34 i 35 j 36 k 37 l 38 m 39 n 40 o 41 p 42 q 43 r 44 s 45 t 46 u 47 v 48ADDSOLOADDSOLOADDSOLOw x y z / |_49 50 51 52 53 54 55 56 57 58 59 60A 1 B 2 C 3 D 4 E 5 F 6 G 7 H 8 I 9 J 10 K 11 L 12 M 13 N 14 O 15 P 16 Q 17 R 18 S 19 T 20 U 21 V 22 W 23 X 24109 110 111 112 113 114 115 116 117 118 119 12085 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 10861 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84CURSORD.B.O.SAMPLESLOW FASTRATEINHIBITLATCHCLEARSOLOHOLDASSIGNREVERSENORMALVALUEOFF ONASSIGNMASTERSASSIGNMASTERSGRANDMASTERADDSOLOP1 P2 MASTERCHASEEDITMEMORYFILEASSIGNPAGESTACKCLEARPATCHRECORDEXIT SETUPw x y z / \ | ♦ ∅ F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12CROSSFADEGO BACK GO BACK GO BACKGO BACK GO BACK GO BACKGO BACK GO BACK GO BACK CROSSFADE GO BACK GO BACK GO BACK110 mm1500 mmPOWER 100 ~ 240VAC; 50 ~ 60Hz; 0.5A. FUSE: 2A M205/240VDESKLAMPDESKLAMP DMX-512 OUT MIDI INManufactured in Australia by: JANDS Electronics Pty Ltd ACN 001 187 83760/120 CHANNELS / 24 ASSIGN MASTERSMEMORY LIGHTING CONTROL CONSOLEEvent Plus 60TSS-EVENTPLUS60-0108-05