SOLVIN AWARD FOR PVC INNOVATION 2010
SOLVIN AWARD FOR PVC INNOVATION 2010
SOLVIN AWARD FOR PVC INNOVATION 2010
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SOLVIN</strong> <strong>AWARD</strong> <strong>FOR</strong><br />
<strong>PVC</strong> <strong>INNOVATION</strong> <strong>2010</strong><br />
Demonstrations of<br />
a limitless imagination
innovative projects<br />
Innovation has been the cornerstone of this<br />
fourth edition of the SolVin Award and lived up<br />
to all expectations by continuing the tradition of<br />
technological development which began in 1932<br />
with the manufacture of the first plastic pipe.<br />
Then in 1946 vinyl revolutionised the music<br />
industry and in 1954 the introduction of <strong>PVC</strong><br />
profile window frames significantly improved the<br />
thermal insulation of buildings.<br />
In <strong>2010</strong>, 141 projects competed for the innovation<br />
prize, giving us confidence that the next<br />
generation is ready to continue our work. I would<br />
like to stress the importance of the Vinyloop ®<br />
initiative for the way <strong>PVC</strong> is currently used and its<br />
rehabilitation as a sustainable material.<br />
Together, we have all contributed to the success<br />
of the voluntary undertaking known as Vinyl <strong>2010</strong>.<br />
The result is the recycling of 200,000 tonnes a<br />
year of <strong>PVC</strong> otherwise at the end of its life and<br />
this is confidently expected to reach 240,000<br />
tonnes in <strong>2010</strong>. But also of note is the reduction,<br />
currently estimated at 50%, in the use of lead<br />
stabilisers, the total withdrawal of cadmium<br />
stabilisers and significant reduction in the CO2 emissions from our factories.<br />
We are convinced that the key to our future lies in<br />
sustainability. It is up to us now to set the targets<br />
for 2020.<br />
As far as SolVin is concerned, I am pleased to be<br />
able to tell you now what these are. We intend to<br />
achieve a 20% reduction in all the following areas :<br />
• Energy consumption<br />
• Logistics’ impact<br />
• Greenhouse gas emissions<br />
• Discharges into the atmosphere and into water.<br />
These are our undertakings, which will benefit the<br />
entire production chain downstream. But without<br />
you, the processors, the additive suppliers, the<br />
equipment manufacturers, the manufacturers of<br />
finished products, we won’t achieve anything.<br />
This is why I must pay tribute here to the 141<br />
innovative projects submitted for the SolVin<br />
Award. Whether prize winners or not, they are<br />
testimony to the dynamism and commitment<br />
of the sector to respond to the global challenge<br />
of making <strong>PVC</strong> a major player in the field of<br />
sustainable development.<br />
Please accept our thanks !<br />
Pierre Tucoulat<br />
SolVin Managing Director President<br />
SolVin Award <strong>2010</strong> – 01
solvin award<br />
for<br />
<strong>PVC</strong> Innovation<br />
<strong>2010</strong><br />
contents<br />
Jury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03<br />
Winners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05<br />
Nominees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09<br />
Innovation Award . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15<br />
Recycling Award . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71<br />
Design Award . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89<br />
Participants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108<br />
Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110<br />
Application Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112<br />
02 – SolVin Award <strong>2010</strong>
jury<br />
prof. marianne gilbert, the academic, president of the jury<br />
“ An important trophy for <strong>PVC</strong>’s image”<br />
Doctor and Professor at the Loughborough University, Marianne Gilbert is an expert in<br />
materials engineering. The technology associated with <strong>PVC</strong> and polyethylene is one of her<br />
specialist subjects. 2006 saw Marianne receive the Swinburne Award from the Institute of<br />
Materials, Minerals and Mining (IoMMM), for “her exceptional contribution to research into<br />
development and understanding of <strong>PVC</strong>, in terms of science, engineering and technology”.<br />
axel enthoven, the designer<br />
“Focus on the intelligence behind the products!”<br />
He is the founder of Belgium’s largest design studio, Enthoven Associates, which has branches<br />
in the Netherlands, Paris, Bangkok and Seoul.<br />
Barbara andreani, the communicator<br />
“Focus on innovation and the environment”<br />
Barbara Andreani is director of Enterprise Europe Brussels at the Brussels Enterprise Agency<br />
(ABE). Her role is to help businesses and research centres to enhance their knowledge and to<br />
assist them in finding growth prospects within Europe.<br />
matt Defosse, the journalist<br />
“A very broad and in-depth field of observation”<br />
Matt Defosse, an American based in Germany, has been working at Modern Plastics Worldwide<br />
magazine for 13 years, and has been editor-in-chief for the last four.<br />
David cook, the environmentalist<br />
“ There are no sustainable materials,<br />
only the sustainable management of materials”<br />
British-born David Cook works for The Natural Step, an international NGO based in Sweden,<br />
and has been involved in sustainable development for the last decade. His role involves<br />
convincing big businesses to take this issue into account and then advise them about<br />
implementing the decisions they make.<br />
SolVin Award <strong>2010</strong> – 03
04 – SolVin Award <strong>2010</strong>
<strong>2010</strong><br />
Winners<br />
SolVin Award <strong>2010</strong> – 05
06 – SolVin Award <strong>2010</strong><br />
golD solvin award see on page 32<br />
georg fischer Deka<br />
innovative photo bioreactors based on<br />
100% pvc to grow micro algae<br />
– Opens the way to a wide range of applications<br />
– Project that exemplifies how <strong>PVC</strong> contributes<br />
to the public good by opening up new avenues<br />
for the production of food and green fuels, in<br />
particular here, with their photobioreactor system<br />
silver solvin award see on page 57<br />
rohm & haas<br />
surecel: Breakthrough in processing aid<br />
technology for foamed pvc<br />
– Major advance in the <strong>PVC</strong> foam process aid<br />
technology<br />
– Reduction in the density of the extruded panel of<br />
up to 20 % without loss of performance results in<br />
a huge saving in raw material and enhances the<br />
sustainability of <strong>PVC</strong> in the construction sector<br />
BronZe solvin award see on page 16<br />
alkor Draka<br />
highest fire resistance<br />
for stretched ceilings in pvc (Bs1d0)<br />
– Limitation of the smoke release from the <strong>PVC</strong>s<br />
used in stretch ceilings<br />
– New calendaring formula enabling to produce<br />
P-<strong>PVC</strong>s meeting class Bs1d0: the best<br />
performance class for smoke density produced by<br />
plastics
ecycling solvin award see on page 84<br />
profine<br />
kBe system_88mm<br />
Window and Door system<br />
– System combining optimum functionality and<br />
rigidity in a slim and elegant frame<br />
– Use of 50 % recycled products and 50 % virgin<br />
raw material with no lead content meets the<br />
requirements of the German standards governing<br />
the energy performance of buildings<br />
Design solvin award see on page 99<br />
molusk<br />
aquatic jewelry<br />
– Originality of the creations thanks to the innovative<br />
use of techniques for shaping <strong>PVC</strong>, not used in<br />
the jewellery field<br />
– Unique know-how that brings a new semantic for<br />
plastics and sublimates a wellknown material<br />
SolVin Award <strong>2010</strong> – 07
08 – SolVin Award <strong>2010</strong>
<strong>2010</strong><br />
nominees<br />
SolVin Award <strong>2010</strong> – 09
innovation<br />
alkor Draka see on page 16<br />
highest fire resistance for stretched ceilings<br />
in pvc (Bs1d0)<br />
aluplast see on page 17<br />
“the Best Window in its class”<br />
energeto ® | foam inside<br />
Bolon see on page 22<br />
Botanic: woven vinyl flooring with vegetable oils<br />
based plasticisers<br />
10 – SolVin Award <strong>2010</strong><br />
gerflor group see on page 31<br />
pvc flooring “creation clic system”:<br />
loose lay plank with “clic system”<br />
gf Deka see on page 32<br />
innovative photo bioreactors based on 100% pvc to<br />
grow micro algae<br />
graBoplast see on page 34<br />
new generation of antibacterial pvc floorcoverings
klöckner pentaplast see on page 40<br />
counterfeit-proof pvc-film packaging<br />
politsch kunststofftechniksee on page 52<br />
cross-Box - reduced energy consumption in<br />
profile extrusion<br />
profel see on page 53<br />
reinforcing pvc windows and doors while<br />
maintaining high thermal properties<br />
innovation<br />
rohm anD haas see on page 57<br />
surecel: Breakthrough in processing aid<br />
technology for foamed pvc<br />
sirci gresintex see on page 61<br />
alvehol 1200<br />
SolVin Award <strong>2010</strong> – 11
ecycling<br />
BannerBags see on page 74<br />
Bannerbags<br />
fitt ®<br />
hose made of regenerated soft pvc<br />
12 – SolVin Award <strong>2010</strong><br />
see on page 76<br />
hamos see on page 78<br />
reclaimed pvc from waste window profiles using<br />
hamos Wrs system<br />
oD plast see on page 82<br />
high quality drainage pipe with high content of postconsumers<br />
rigid pvc scraps<br />
profine see on page 84<br />
kBe system_88mm<br />
window and door system<br />
WeiDner iBerica see on page 87<br />
new injection systems for converting difficult<br />
plastic wastes
Design<br />
lml see on page 96<br />
pvc and nature<br />
martina Doll see on page 98<br />
materialised light<br />
molusk see on page 99<br />
aquatic jewelry<br />
Wallcovering puBBlicita’ see on page 104<br />
trialsystem, eco-design for human habitat<br />
Zicla see on page 105<br />
Zebra: traffic separators for cycle lanes<br />
Zicla see on page 106<br />
modular auto-fit platform for bus access<br />
SolVin Award <strong>2010</strong> – 13
14 – SolVin Award <strong>2010</strong>
ALkOR DRAkA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16<br />
ALUPLAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17<br />
AMx AUTOMATION TECHNOLOGIES. . . . . . . . . . . . . . 18<br />
AVIMAT COATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18<br />
B&B COMPOUNDS, ANTONPLAS . . . . . . . . . . . . . . . . 19<br />
BAERLOCHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19<br />
BENECkE-kALIkO (2) . . . . . . . . . . . . . . . . . . . . . . . . . 20<br />
BEx FRANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21<br />
BOLON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22<br />
CENTI CORE COATING . . . . . . . . . . . . . . . . . . . . . . . . 23<br />
CHEMSON. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23<br />
CHEMTURA VINyL ADDITIVES LAMPERTHEIM . . . . . . 24<br />
DEBOLON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24<br />
DICkSON CONSTANT . . . . . . . . . . . . . . . . . . . . . . . . . 25<br />
DIETzEL UNIVOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25<br />
DREAM VALLEy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26<br />
DUGDALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26<br />
EMPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27<br />
ExTRUPLESA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27<br />
ExTRUWOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28<br />
FAINPLAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28<br />
FERDINAND STükERjüRGEN . . . . . . . . . . . . . . . . . . 29<br />
FITT ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29<br />
FLAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30<br />
GERFLOR GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31<br />
GF DEkA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32<br />
GkV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33<br />
GRABOPLAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34<br />
GREPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35<br />
GRIFFINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35<br />
GROUPE LEGRAND (2) . . . . . . . . . . . . . . . . . . . . . . . . 36<br />
GRUPO PLáSTICOS FERRO. . . . . . . . . . . . . . . . . . . . . 37<br />
HL PLASTICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37<br />
HULTEC EUROPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38<br />
INEOS FILMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38<br />
INOUTIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39<br />
kATOEN NATIE ITALIA . . . . . . . . . . . . . . . . . . . . . . . . . 39<br />
kLöCkNER PENTAPLAST . . . . . . . . . . . . . . . . . . . . . . 40<br />
köMMERLING CHEMISCHE FABRIk . . . . . . . . . . . . . . 41<br />
kONRAD HORNSCHUCH (2). . . . . . . . . . . . . . . . . 41-42<br />
<strong>2010</strong><br />
innovation<br />
Award<br />
kOPOS kOLíN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42<br />
kUNSTOSTOFF MUSEUM . . . . . . . . . . . . . . . . . . . . . . 43<br />
LICHTER - ExTRUSIONSTECHNIk. . . . . . . . . . . . . . . . 43<br />
LML. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44<br />
MALIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44<br />
MEHLER TExNOLOGIES . . . . . . . . . . . . . . . . . . . . . . . 45<br />
NOVINTISS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45<br />
OMNOVA WALLCOVERING TRADING AS MURASPEC . 46<br />
ONGARO GIOVANNI, MINGHI TOMMASO . . . . . . . . . . 46<br />
ONGROPACk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47<br />
PERLEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47<br />
PIPELIFE INTERNATIONAL (5). . . . . . . . . . . . . . . . 48-50<br />
PLASTICO ROTOTECH. . . . . . . . . . . . . . . . . . . . . . . . . 50<br />
POLINTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51<br />
POLITSCH kUNSTSTOFFTECHNIk . . . . . . . . . . . . . . . 52<br />
PROFEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53<br />
PROTAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54<br />
REHAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54<br />
RENOLIT BELGIUM . . . . . . . . . . . . . . . . . . . . . . . . . . . 55<br />
RENOLIT IBERICA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55<br />
ROADCOM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56<br />
ROHM AND HAAS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 57<br />
SIMONA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58<br />
SINEPIPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58<br />
SIOEN INDUSTRIES (3) . . . . . . . . . . . . . . . . . . . . . 59-60<br />
SIOEN INDUSTRIES AND DECEUNINCk . . . . . . . . . . . 60<br />
SIRCI GRESINTEx (2) . . . . . . . . . . . . . . . . . . . . . . 61-62<br />
Skz (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63<br />
SOCREDIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63<br />
SOLVAy BENVIC IBERICA (2) . . . . . . . . . . . . . . . . . . . . 64<br />
STUDIO ARkIT & PARTNERS . . . . . . . . . . . . . . . . . . . 65<br />
SVEDAFLEx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65<br />
TECHNOFRANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66<br />
THE DOW CHEMICAL COMPANy. . . . . . . . . . . . . . . . . 66<br />
TRAVyL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67<br />
UNIVERSITy OF SALENTO. . . . . . . . . . . . . . . . . . . . . . 67<br />
VARTECO QUIMICA IBERICA . . . . . . . . . . . . . . . . . . . . 68<br />
VERSEIDAG - INDUTEx . . . . . . . . . . . . . . . . . . . . . . . . 68<br />
zAkłADy LENTEx SPółkA AkCyjNA . . . . . . . . . . . . . 69<br />
SolVin Award <strong>2010</strong> – 15<br />
Innovation Award
The European market for stretched ceiling<br />
applications requires materials with good fire<br />
reaction and medium smoke emission (BS2D0).<br />
For CE labeling according to the NF EN 14716<br />
standard, the EN 13501-1 standard for measuring<br />
fire reaction and smoke emission considers 3<br />
different aspects for classifying the material: heat,<br />
smoke and dripping. As the smoke density is the<br />
main cause for killing people in the case of fire,<br />
our aim has been to improve the current state<br />
of the art performance of the materials used for<br />
stretched ceilings. Using the right combination of a<br />
new formulation and our calendaring process, we<br />
have developed and produced new plasticised <strong>PVC</strong><br />
films with Bs1d0 classification, which means the<br />
best smoke density classification achievable with<br />
plastic films.<br />
16 – SolVin Award <strong>2010</strong><br />
alkor Draka<br />
highest fire resistance for stretched ceilings in pvc<br />
(Bs1d0)<br />
> Raphaël Lesprit<br />
> +33 344 69 13 88<br />
> France
energeto ® is a window without a metallic thermal<br />
bridge in the frame-sash construction. The system<br />
boasts high heat insulation values in all versions<br />
and profile depths. This contributes actively to the<br />
reduction of CO 2 , the saving of heating costs and<br />
consequently to environmental protection. Moreover<br />
energeto ® combines outstanding technology with<br />
an appealing design. The insulation properties of<br />
the metal-free window obtained by bonding window<br />
sash with the insulating glass pane as well as by<br />
replacing the steel reinforcement by fiber-glass<br />
reinforced plastic strips have been further improved<br />
by foaming the profile chambers with special<br />
polyurethane foam. By this means, energeto ® now<br />
reaches unprecedented insulation Uw-values of<br />
0.61 W/m²k.<br />
aluplast nominee<br />
“the Best Window in its class”<br />
energeto ® | foam inside<br />
> Edda Gärtne<br />
> +49 721 47171-0<br />
> Germany<br />
SolVin Award <strong>2010</strong> – 17<br />
Innovation Award
amx automation technologies<br />
“vip-W” pvc window<br />
“VIP-W” is a completely new technology in <strong>PVC</strong>window<br />
production. Thermal insulation is increased<br />
by means of vacuum and additional heat radiant<br />
barriers. Compared to existing <strong>PVC</strong> window profile<br />
systems the same or even a better insulation can<br />
be reached with a smaller external dimension, less<br />
weight and a smaller cost. “VIP-W” windows are<br />
100 % recyclable.<br />
> Meinhard Schwaiger<br />
> +43 732 244 119<br />
> Austria<br />
18 – SolVin Award <strong>2010</strong><br />
avimat coating<br />
artificial pathways with a pvc backing<br />
Artificial paths based on a membrane of <strong>PVC</strong> for the<br />
decoration of gardens, ponds and pathways.<br />
This novel approach is easy to lay and provides both<br />
decoration and a secure anti slip footing around<br />
the garden.<br />
> Herbert Altena<br />
> +31 383 859 255<br />
> The Netherlands
B&B compounDs, antonplas<br />
pvc tactile footway for blind and visually impaired<br />
people<br />
This simple system, having only two basic codes,<br />
makes it easy to identify the footway, turns, changes<br />
in direction, warning lines. It provides the foot with<br />
a clear tactile perception which is hard to ignore,<br />
transmitting a constant warning and sense of alert<br />
thanks to the specially designed height and radius<br />
of the pattern. Based on a limited number of clear<br />
design principles (universality of signs, safety,<br />
durability), this product can be used in a very wide<br />
range of applications, both outdoors and indoors.<br />
Footways made with this system allow blind and<br />
visually impaired people to improve their autonomy<br />
and mobility by actively using the tactile information<br />
provided by the paving to their feet and/or long<br />
cane. This system further helps visually impaired<br />
people by means of colour contrasts between the<br />
footway and the surrounding paving.<br />
> Massimo Battista<br />
> +39 0823 581 054<br />
> Italy<br />
Baerlocher<br />
low voc stabilisation system based on pastes for the<br />
flooring industry<br />
The new low VOC paste stabilisation system helps<br />
the flooring industry to reduce emissions whilst<br />
retaining all of the performance benefits of the<br />
traditional liquid stabilisers. It is suitable for filled/<br />
pigmented plastisols as well as for clear plastisols.<br />
These new Ca/zn paste stabilisers are specially<br />
designed for the stabilisation of the clear topcoat<br />
(wear layer) which is the main contributor to the<br />
emissions from flooring.<br />
The performances of these new stabilisers are<br />
comparable to those of traditional liquid stabilisers,<br />
in terms of heat stability, transparency, colour<br />
hold, aging properties… key further advantages<br />
are the absence of phosphites and long chain<br />
alcohols, thus giving a substantial reduction in the<br />
noticeable odour.<br />
> Emilio Pellegrini<br />
> +39 317 451 366<br />
> United Kingdom<br />
SolVin Award <strong>2010</strong> – 19<br />
Innovation Award
Benecke-kaliko<br />
Bi-tone uev (unsupported expanded vinyl = pvc<br />
foam foil) for automotive interiors<br />
The bi-tone UEV (unsupported expanded vinyl)<br />
developed by Benecke-kaliko facilitates the<br />
processing of foil-laminated interior parts by the<br />
automotive industry. It is now possible to produce<br />
automotive interior parts like door panels with two<br />
different colors in one production step. This makes<br />
the use of <strong>PVC</strong> decorative surface more competitive<br />
and cost efficient in car interior applications.<br />
> Roland Freudenmann<br />
> +49 5116 302 562<br />
> Germany<br />
20 – SolVin Award <strong>2010</strong><br />
Benecke-kaliko<br />
acella ® eco green – a new eco-friendly artificial<br />
leather<br />
Acella ® Eco Green is a new supported expanded<br />
vinyl foil (artificial leather) especially designed<br />
for permanent contact with the skin. It satisfies<br />
the öko-Tex ® 100 standard level 2 requirements.<br />
It conforms to the highest automotive industry<br />
standards for interior surface products. Acella ® Eco<br />
Green is a contact allergen free material (according<br />
to the Volvo ENV 0006 specification), antimony-free<br />
and low-emission.<br />
> Roland Freudenmann<br />
> +49 5116 302 562<br />
> Germany
Bex france<br />
Decking coextruded in wood composites<br />
Decking made of <strong>PVC</strong> recycling and natural fibers<br />
(wood or hemp) giving natural aspect and offering<br />
all the advantages of <strong>PVC</strong> products (water resistant,<br />
UV resistant, competitive price…)<br />
Decking is coextruded in fine thickness: <strong>PVC</strong> with<br />
fibers used for the external layer and recycling <strong>PVC</strong><br />
used for the internal layer.<br />
> Bernard Cohen<br />
> +33 950 604 369<br />
> France<br />
SolVin Award <strong>2010</strong> – 21<br />
Innovation Award
Bolon is the first flooring enterprise in the world<br />
to switch to using plasticizers consisting of 100%<br />
renewable raw material, with their origin in<br />
modified vegetable oils. With the introduction of the<br />
BOTANIC collection the company has showed that<br />
it is possible to use a non-phthalate plasticizer in<br />
an advanced flooring product. The company has<br />
been implementing a progressive environmental<br />
improvement program in all areas of its operations<br />
for many years. The new plasticizer is a part of<br />
Bolon ® Green – a strategic objective aimed at being<br />
able to offer a product that is environment friendly<br />
and climate neutral. With a focus on superior quality<br />
innovative flooring, Bolon’s products meet all the<br />
most stringent standards for fire safety, wear and<br />
durability, sound insulation, etc.<br />
22 – SolVin Award <strong>2010</strong><br />
Bolon nominee<br />
Botanic : woven vinyl flooring with vegetable oils<br />
based plasticisers<br />
> Helen Emanuelsson<br />
> +46 321 530 400<br />
> Sweden
centi core coating<br />
pvc bumper for warehouse loading bays<br />
The application allows for the cost effective<br />
replacement of alternative materials eg rubber and<br />
components may be produced in any colour to<br />
meet end users requirements.<br />
> W-P van der Burg<br />
> +31 105 917 684<br />
> The Netherlands<br />
chemson<br />
Ba 63 – a new cost-effective blowing agent system<br />
Foamed <strong>PVC</strong> products are becoming more<br />
popular. This is because less material is required<br />
to produce articles of the same size, and lighter<br />
finished products can be produced. Chemson<br />
offers different Blowing Agents and Blowing Agent<br />
Systems. Chemson has developed a new Blowing<br />
Agent system, BA 63. BA 63 has improved powder<br />
flow characteristics and is cost effective compared<br />
to traditional blowing agent systems. BA 63 has<br />
improved compatibility with other components<br />
of the recipe, which leads to an improvement in<br />
dry blend preparation and quality. Because of its<br />
advantages, the Blowing Agent system BA 63 is<br />
proving a great success in the European market and<br />
also promises further expansion worldwide.<br />
> Martin Johnson<br />
> +44 1912 597 040<br />
> Central Europe<br />
SolVin Award <strong>2010</strong> – 23<br />
Innovation Award
chemtura vinyl aDDitives<br />
lampertheim<br />
heavy metal-free, renewable and sustainable<br />
stabilizers for flexible pvc<br />
Liquid OBSTM <strong>PVC</strong> stabilizer types will soon<br />
be used in the flexible <strong>PVC</strong> Market. They are<br />
environmentally friendly, because they avoid<br />
solvents and other critical substances, are based on<br />
renewable vegetable oils and need less energy in<br />
their production. OBSTM stabilizers are used at low<br />
levels, meaning lower VOC and odor characteristics<br />
as well as less emissions during processing<br />
and conversion of <strong>PVC</strong>. New stabilizers provide<br />
additional advantages for flexible <strong>PVC</strong>.<br />
> Karl-J. Kuhn<br />
> +49 6202 958 553<br />
> Germany<br />
24 – SolVin Award <strong>2010</strong><br />
DeBolon<br />
Debolon collection leben + pflegen (life and care)<br />
The debolon Leben+Pflegen (Life and care)<br />
collection, with its novel color and design concept,<br />
has been developed as a first set of elastic floor<br />
coverings for senior residences and healthcare<br />
units. Developed in accordance with the findings<br />
of healthcare science and the requirements of care<br />
unit managers and architects it possesses a highly<br />
mat surface that prevents reflection, makes the<br />
residents more sure-footed and offers high impact<br />
sound insulation.<br />
> Corinna Meisel<br />
> +49 3406 500 278<br />
> Germany
Dickson constant<br />
seaguard flex & seaguard plus<br />
Dickson and Sunbrella ® launch “Seaguard by<br />
Dickson”, the ideal solution for covering and<br />
protecting boats. Available in two versions –<br />
Seaguard Flex and Seaguard Plus – this watertight<br />
outdoor fabric is specially designed for the<br />
protection of boats and their equipment. Capable of<br />
standing up to the worst the weather can throw at it<br />
(rain, sun, heat or cold), Seaguard combines stateof-the-art<br />
expertise with a stylish finish that gives it a<br />
genuine “textile” look. Seaguard can be used for all<br />
boating applications, thanks to the fact that it comes<br />
in weights adapted to each type of use.<br />
> Marie Hélène Roeland & Arnaud Dalle<br />
> +33 320 455 959<br />
> France<br />
DietZel univolt<br />
hot runner injection moulding in pvc<br />
Dietzel Univolt successfully implemented for some<br />
injection moulding products, such as pipe clips and<br />
other accessories, hot running systems, even in<br />
16 or 32 cavity tools. Furthermore, since the year<br />
2009 all lead formulations have been substituted<br />
by Calcium zinc stabilised <strong>PVC</strong> compounds. In a<br />
second step also the small remaining gate material<br />
has been re-used inline by regrinding the material<br />
and adding the milled material to the virgin one.<br />
> Markus Palfinger<br />
> +43 176 076 160<br />
> Austria<br />
SolVin Award <strong>2010</strong> – 25<br />
Innovation Award
Dream valley<br />
easysWeet: a new generation of pvc bearing walls<br />
for the building of “low-cost” residences<br />
easySWEET is a range of 7 models of low-cost<br />
residences delivered in kit and transportable<br />
economically without abnormal load or lifting<br />
machines. This new generation of prefabricated<br />
solutions (from 13 to 45 square meters) uses an<br />
ingenious system of construction constituted mainly<br />
by <strong>PVC</strong> which allows to realize design, economic,<br />
flexible and resistant constructions.<br />
With 3 different levels of finishing, these residences<br />
bring a new answer to the markets of the individual<br />
and of the spare time activities residences<br />
(social housings, students’ residences or seniors’<br />
residences…) These residences allow furthermore to<br />
open the new market of “added rooms to your main<br />
house” to make a guest room, a “studio” for young<br />
adults or old people, office for work at home, a play<br />
room… Ready of going up by private individuals or<br />
partners’ network of distributors affected persons,<br />
these residences are built up in 1 day. Although all<br />
the elements in <strong>PVC</strong> are very big dimensions (2 in 3<br />
meters high on 2 in 4 meters long), they remain light<br />
enough to be carried in men’s hands.<br />
> Philippe Bourgain<br />
> +33 2 54 07 05 18<br />
> France<br />
26 – SolVin Award <strong>2010</strong><br />
DugDale<br />
Ducafreeze: a calcium organic rigid pvc-based<br />
purge compound that actually works<br />
It can take hours to change colours or clean down<br />
when processing <strong>PVC</strong>, plus the constant risk that<br />
tooling might be damaged by decomposition or<br />
dismantling procedures. This equates to costs<br />
and reduced profits. Ducafreeze is a rigid Calcium<br />
Organic-based high temperature freeze/purge<br />
compound that actually works and has been<br />
proven to compete against lead-based freeze/purge<br />
compounds. Freeze/purge compounds can cut<br />
clean down costs and colour changes providing less<br />
scrap and lower tool maintenance. This reduces<br />
costs and dramatically reduces machine downtime.<br />
Ducafreeze works at temperatures of up to 200°C<br />
and has been proven in simple and complex tooling<br />
in extrusion, co-extrusion and sheet extrusion as<br />
well as injection moulding tools and barrels.<br />
> J L Ryan<br />
> +44 1422 832 501<br />
> United Kingdom
empa<br />
tensairity: new light-weight structures with pvc<br />
coated fabrics<br />
Tensairity is a new light-weight structure based<br />
on the synergetic combination of fabrics, struts<br />
and air. First Tensairity structures such as bridges<br />
are demonstrating the feasibility and potential<br />
of the technology. <strong>PVC</strong>-coated polyester fabrics<br />
have proven to be ideal for temporary Tensairity<br />
applications. This new technology opens new<br />
possibilities for <strong>PVC</strong> in the growing market of<br />
light-weight structures. The Tensairity technology<br />
of the Swiss company Airlight is being investigated<br />
and further developed at the Center for Synergetic<br />
Structures at Empa, the Swiss federal research<br />
institution of material science and technologies.<br />
> Rolf Luchsinger<br />
> +41 448 234 090<br />
> Switzerland<br />
extruplesa<br />
road singposts in pvc reinforced with glass fibre<br />
Road sings manufactured in <strong>PVC</strong> 30% glass fiber<br />
reinforced <strong>PVC</strong> making the frame more resistant,<br />
covered by an external <strong>PVC</strong> layer ensuring a good<br />
weathering resistance. This product obtains the<br />
stiffness required, using poltrusion; it means a sort<br />
of co extrusion of <strong>PVC</strong> with oriented glass fibres.<br />
Due that it is an outdoor application, it is necessary<br />
the product doesn’t suffer from corrosion or other<br />
kind of degradation, and has a low or inexistent<br />
maintenance.<br />
> Enrique Moliner Mañas<br />
> +34 976 144 455<br />
> Spain<br />
SolVin Award <strong>2010</strong> – 27<br />
Innovation Award
extruWooD<br />
extruwood-cap: pvc based wood-composites, a<br />
technical innovation for wood-windows<br />
Aluminum caps are often used for the weather<br />
protection of wood-windows. Due to their design<br />
the wood frame will loose insulation capability.<br />
Extruwood-Cap will bridge the gap with an<br />
environmental friendly nature based weather<br />
protection for wood windows. High thermal<br />
insulation capability of Extruwood-Cap will entitle<br />
wood window manufacturer either to save material<br />
(less frame thickness and/or window glass thickness<br />
to ensure an optimum UF-value of the window)<br />
or comply with national building codes to replace<br />
existing windows without main re-construction<br />
works.<br />
> Sven Wolf<br />
> +43 676 305 2830<br />
> Austria<br />
28 – SolVin Award <strong>2010</strong><br />
fainplast<br />
thermoplastic elastomeric compound based on<br />
pvc-p for gaskets, pipes and cables sheathing<br />
Multi-component Flexible <strong>PVC</strong> dynamically modified<br />
during production process.<br />
PkS 1000 is obtained with <strong>PVC</strong> compounding lines<br />
duly modified and is available in a wide range of<br />
hardness.<br />
The compound PkS 1000 developed by us<br />
maintains the good properties of <strong>PVC</strong> such as fire<br />
resistance, easy processing and low cost but has<br />
significant physical and mechanical improvements<br />
that widen the scope of applications for its use.<br />
This grade has been used for the production of<br />
shutting gaskets requesting a high elastic recovery<br />
at low temperature (-22°C) and at high temperature<br />
(+70°C). It can be used for the sheathing of cables<br />
requesting high oil and Hydrocarbon resistance<br />
and high mechanical performances at very low<br />
temperatures within the segment of fire resistant<br />
cables. For this application PkS 1000 is at the<br />
moment under approval from a major manufacturer<br />
of special cables.<br />
> Ottavio Tulli<br />
> +39 0736 403 605<br />
> Italy
ferDinanD stükerjürgen<br />
rigid pvc foam siding profiles with a wood design<br />
Showing keen intuition for tomorrow’s products,<br />
Ferdinand Stükerjürgen continually develops ideas<br />
and technology to an extremely high standard. The<br />
innovative rigid <strong>PVC</strong> foam siding profiles with their<br />
known positive properties such as low weight, good<br />
insulation, easy processing and assembly, durability<br />
and recyclability at the end of the product life cycle<br />
etc. have been produced with the look of wood.<br />
The company, founded in 1967, has a high level of<br />
competence in processing thermoplastics.<br />
> Pala Varghese<br />
> +49 5244 404 329<br />
> Germany<br />
fitt ®<br />
spiral hose made of pvc compound highly resistant<br />
to chlorinated components and water<br />
This invention concerns the formulation of a brand<br />
new material highly resistant to normal disinfectants<br />
used in swimming pool water disinfection and the<br />
co-extrusion process needed to couple this material<br />
to a flexible hose in order to create, inside the hose<br />
itself, a chlorine proof internal layer.<br />
Thanks to that, it is possible to lay a thin protective<br />
skin on the internal side of the hose able to protect<br />
itself from chlorine water attack. This is strongly<br />
useful in order to improve chemical and physical<br />
hose resistance and its mechanical properties<br />
during its working life with an increase in product<br />
life time as well.<br />
The new protective skin, made of a particular<br />
high molecular weight <strong>PVC</strong> resin and innovative<br />
plasticizers, is laid on the internal surface of a<br />
plasticized <strong>PVC</strong> stripe throughout co-extrusion<br />
process before wrapping the stripe itself on a<br />
mandrel. A brand new extrusion head engine<br />
enables to couple and glue different layers made of<br />
different materials.<br />
> Rita Mascolo<br />
> +39 0444 461 000<br />
> Italy<br />
SolVin Award <strong>2010</strong> – 29<br />
Innovation Award
30 – SolVin Award <strong>2010</strong><br />
flag<br />
copper art: waterproofing membranes with a<br />
perfect marriage copper/pvc<br />
The marriage between copper and <strong>PVC</strong>, obtained<br />
with a patented product system, guarantees that all<br />
Copper Art membranes will oxidize, taking on the<br />
patina of age, gradually changing from tawny brown<br />
to dark brown, just like real copper, when exposed<br />
to the elements. The system creates an unbeatable<br />
cost-benefit, with enhanced appearance. The<br />
system eliminates the risks associated with<br />
traditional metal roofing such as cold bridging,<br />
air-tightness, corrosion and water ingress at<br />
penetrations and details on low pitched systems. It<br />
can be laid easier than copper roofing and it gives a<br />
better insulation. It’s suitable for any kind of roofing.<br />
> Claudio Fossen<br />
> +39 0350 951 011<br />
> Italy
The innovative GERFLOR flooring “CREATION CLIC<br />
SySTEM” is a <strong>PVC</strong> lose lay plank with “clic system”.<br />
This new GERFLOR product is a 100% loose lay<br />
plank offering realistic wood design AND easy and<br />
fast track installation. The <strong>PVC</strong> planks are laid on<br />
the floor without glue and connected together with<br />
the “clic system”. This product is a must for flooring<br />
in construction or renovation.<br />
gerflor group nominee<br />
pvc flooring “creation clic system”: loose lay<br />
plank with “clic system”<br />
> Olivier Ceysson<br />
> +33 475 506 902<br />
> France<br />
SolVin Award <strong>2010</strong> – 31<br />
Innovation Award
This innovative project is dedicated to the<br />
production of efficient pipes and fittings made<br />
of 100 % transparent <strong>PVC</strong> to be used as photo<br />
bioreactors to grow micro algae. The products are<br />
UV-stabilised and are characterised by innovative<br />
elements that can be combined for spectral<br />
modulation of the light (UV/vis/NIR) irradiated into<br />
the suspension of algae. The product range is wide,<br />
including the integration of static mixers into the<br />
pipe and the possibility to produce pipes with very<br />
thin walls having high optical quality and excellent<br />
interior surfaces. In addition, significantly energy<br />
saving pipings / fittings are provided for the level<br />
and parallel arrangement of the photo bioreactor<br />
pipes.<br />
32 – SolVin Award <strong>2010</strong><br />
gf Deka<br />
innovative photo bioreactors based on 100% pvc to<br />
grow micro algae<br />
> Stephan Schuessler<br />
> +49 6468 915 131<br />
> Germany
gkv<br />
future perspective: plastic windows construction as<br />
a dedicated job qualification<br />
Until 2007/2008 there was no training for <strong>PVC</strong><br />
window assemblers. Thanks to the initiative of<br />
the GkV this lack of a qualified training has been<br />
addressed. The German Federal Ministry of<br />
Economics and Technology recently added the<br />
‘<strong>PVC</strong>-window assembler’ training programme to<br />
the training of plastics and rubber technology<br />
processing engineer. More than 50 years after<br />
the introduction of <strong>PVC</strong> windows into the market,<br />
German <strong>PVC</strong> window producers have now the<br />
possibility to train their own junior staff in a qualified<br />
way. Introduction of this <strong>PVC</strong> window assembler<br />
training has two main advantages. Firstly, the official<br />
approval improves the image of the <strong>PVC</strong> window<br />
sector and, more generally, that of the whole <strong>PVC</strong><br />
business. Secondly, highly skilled employees are<br />
the key to the further improvement of <strong>PVC</strong> window<br />
quality and to the continuation of the <strong>PVC</strong> windows<br />
success story.<br />
> Kristin Brunner<br />
> +49 6927 105 31<br />
> Germany<br />
SolVin Award <strong>2010</strong> – 33<br />
Innovation Award
Graboplast developed a new generation of<br />
antibacterial flexible <strong>PVC</strong> floor coverings. Owing<br />
to a new industrial process, it is now possible to<br />
integrate a silver-modified photo catalytic nano<br />
titanium-dioxide in the top transparent layer which<br />
– under visible/UV light radiation – gives a full-scale<br />
antibacterial protection to the product.<br />
Formulations of plasticised <strong>PVC</strong> are converted into<br />
a multilayered structure on impregnated glass fibre<br />
reinforcement using a special coating technology,<br />
followed by a surface embossing step. The resulting<br />
top layer is a transparent antibacterial composite<br />
material.<br />
34 – SolVin Award <strong>2010</strong><br />
graBoplast nominee<br />
new generation of antibacterial pvc floorcoverings<br />
> Tamás Nagy<br />
> +36 96 506 193<br />
> Hungary
grepa<br />
valorisation of Biomass: “valBiom”<br />
VALBIOM developed by GREPA are films and<br />
sheets made of <strong>PVC</strong> and vegetal fibers. Films and<br />
sheets could be transparent or not, with ornamental<br />
inclusions of vegetable fibers.<br />
> Daniel Chazelas<br />
> +33 158 427 600<br />
> France<br />
griffine<br />
pvc g-ecofriendly<br />
COTTING GRIFFINE has developed the “<strong>PVC</strong><br />
G-Ecofriendly” formula, which is innovative and<br />
environmentally respectful. <strong>PVC</strong> G-Ecofriendly,<br />
made of bio raw materials, is the new Griffine<br />
formula for products range used in furniture and<br />
automotive.<br />
> Kamal Mergoum<br />
> +33 130 272 677<br />
> France<br />
SolVin Award <strong>2010</strong> – 35<br />
Innovation Award
groupe legranD<br />
logix 45: the flagship product for electrical<br />
installation in commercial buildings in france<br />
Thanks to a successful association of soft and rigid<br />
<strong>PVC</strong>, the new <strong>PVC</strong> LOGIx 45 range offers a quick,<br />
easy and intuitive installation of wiring devices in<br />
commercial environment.<br />
For several years and in many countries all over<br />
the world Legrand DLPe* is the reference trunking<br />
system for cable management and wiring devices<br />
installation in commercial buildings.<br />
Nowadays DLP or DLPe has become a generic<br />
word designing electrical trunking especially in<br />
commercial environment.<br />
Usually, dedicated mounting accessories are<br />
necessary to fit wiring devices in the trunking.<br />
These accessories take into account dispersion in<br />
dimensions due to manufacturing processes and<br />
corresponding variable play between the moulded<br />
parts of the wiring device and the extruded profile.<br />
> Jean-Michel Rossignol<br />
> +33 243 525 252<br />
> France<br />
36 – SolVin Award <strong>2010</strong><br />
groupe legranD<br />
mosaic program Dlpe snap-on trunking: a new<br />
solution for wiring devices installation in commercial<br />
buildings<br />
The product combines aesthetic and technical<br />
advantages of round corner associated with flexible<br />
cover and convenience of snap on installation for<br />
Mosaic wiring devices.<br />
In traditional electrical trunking design, wiring<br />
devices are fit in the trunking thanks to mounting<br />
devices. Therefore a potential drawback of snap on<br />
design is that the wiring device may be not so firmly<br />
attached in the trunking.<br />
To overcome this limitation Planett Wattohm has<br />
introduced a new version of its LOGIx 45 product:<br />
in the new design, a thin layer of soft <strong>PVC</strong> is<br />
coextruded with the white rigid <strong>PVC</strong> on both inner<br />
sides of the trunking thus bordering the 45mm wide<br />
aperture.<br />
Flexibility of <strong>PVC</strong> cord provides a good adaptation to<br />
the play between the actual width of the opening and<br />
the precise 45 mm width of wiring devices. On the<br />
other hand excellent grip of plasticized <strong>PVC</strong> helps to<br />
secure the mounting.<br />
> Jean-Michel Rossignol<br />
> +33 2 43 52 52 52<br />
> France
grupo plásticos ferro<br />
improved silent pipe system for evacuation<br />
inside buildings<br />
New silent pipes system with thinner wall thickness.<br />
This fact improves hydraulic performance, and<br />
allows the system to be certified under the EN-<br />
1329, and improves fire safety behavior, meeting<br />
the widest range of certifications, saving raw<br />
materials and contributing to sustainability. This<br />
system has been tested by the Fraunhofer Institute.<br />
It has an improved fire classification B-d0-s1,<br />
according Euroclasses (European standard). The<br />
main improvement is in terms of smog generation<br />
s1 in comparison to other systems.<br />
> Rodrigo Doctor<br />
> +34 958 438 611<br />
> Spain<br />
Liniar Bi-Fold Plus<br />
Installation Example: 5-3-2<br />
Meeting Stile Fixing<br />
Meeting Stile �xed to door after single<br />
roller adjustment. To be �xed from either<br />
inside or outside.<br />
Hinge Adjustment<br />
Add/Remove hinge packers to adjust<br />
each hinge independently.<br />
Removable pins for transportation<br />
and ease of installation<br />
2 Packers = Nominal 8mm Gap<br />
Total hinge adjustment: 2mm<br />
Toe and Heel<br />
Each door to be ‘toe and heeled’ to suit<br />
constant nominal door gaps of 8mm.<br />
(see reverse)<br />
hl plastics<br />
Roller Adjustment<br />
Remove cap for allen key<br />
adjustment.<br />
NOM.<br />
MAX<br />
MIN<br />
Single Roller<br />
Remove top single roller for door assembly.<br />
Fix in position once door is assembled.<br />
Adjust bottom roller to suit 8mm nominal<br />
door gap. Adjust top roller to suit desired<br />
compression.<br />
Double Roller<br />
Adjust both top and bottom<br />
rollers to minimum point<br />
for sash assembly in frame.<br />
Once assembled in frame<br />
adjust back to nominal to<br />
suit 8mm door gap.<br />
Adjust top roller to suit<br />
desired compression.<br />
Roller Adjustment<br />
Remove cap for<br />
allen key<br />
adjustment.<br />
NOM.<br />
MAX<br />
MIN<br />
Frame Fixings<br />
Jamb<br />
Fix through recess at 600mm centres.<br />
Clip trim/track in after �xing.<br />
Head/Threshold<br />
Spax �xing<br />
recommended<br />
General Installation<br />
Head<br />
Ensure outer frame is packed out to be<br />
level and true.<br />
Maximum deviation 2mm<br />
Threshold<br />
liniar Bi-fold plus<br />
<strong>PVC</strong>u fencing and decking products provide a low<br />
maintenance and attractive alternative to traditional<br />
timber and concrete products. All items are durable<br />
in use, and highly resistant to weathering and rot.<br />
Among them, you will find:<br />
– slotted posts<br />
– gravel boards<br />
– decking systems<br />
– caravan verandahs<br />
– temporary event fencing<br />
Our range of <strong>PVC</strong>u systems is distributed to both<br />
domestic and commercial markets through our<br />
sister company Liniar.<br />
> Rosie Cheetham<br />
> +44 1332 883 800<br />
> United Kingdom<br />
SolVin Award <strong>2010</strong> – 37<br />
Innovation Award
hultec europe<br />
Bulldog , integrated restraint system for pvc pipes<br />
and fittings<br />
Hultec offers a full range of integrated and fixed<br />
sealing systems for <strong>PVC</strong> pipes and fittings as well<br />
as a large range of seals for ductile iron pipes.<br />
Hultec’s mission is to help pipe manufacturers,<br />
contractors and municipalities alike to add value<br />
to their respective products by improving quality in<br />
the pipeline and cutting cost in their installation. In<br />
this spirit Hultec has created Bulldog, the world’s<br />
first fully integrated restraint system enabling<br />
pipes to be assembled by a simple push-and-fit.<br />
Bulldog not only replaces complicated concrete<br />
thrust blocks and external mechanical couplings<br />
but also enables the use of <strong>PVC</strong> pipes in trenchless<br />
applications such as Horizontal Directional Drilling,<br />
pipe bursting, pipe casing, etc. Try it now !<br />
> Michel Ruffieux<br />
> +41 797 751 024<br />
> France<br />
38 – SolVin Award <strong>2010</strong><br />
ineos films<br />
innovative blister packaging film providing a unique<br />
combination of high barrier performance and<br />
excellent processability<br />
Utilizing advanced technology and proprietary<br />
know-how, INEOS Films, now Bilcare Research, has<br />
engineered the innovative AquaBa® film product<br />
range for high barrier pharma blister packaging.<br />
The AquaBa film series provides a unique set of<br />
performance properties and drug safety in a <strong>PVC</strong>/<br />
PVDC film structure only, encompassing an ultimate<br />
combination of highest water vapor and oxygen<br />
barrier, high film flexibility, excellent thermoforming<br />
performance and processability on packaging lines,<br />
as well as offering best efficiency for an increasingly<br />
cost-conscious market segment.<br />
> Olivier Paillereau<br />
> +49 7633 811 326<br />
> Germany
inoutic<br />
thermal reinforcement with co-extruded steel cables<br />
To enhance the flexural stiffness of <strong>PVC</strong> window<br />
profiles the plastic matrix has been reinforced<br />
with steel cable. This reinforcement has a<br />
significantly lower heat transfer than conventional<br />
reinforcements for window profiles, with a<br />
resistance comparable to that of steel. With this<br />
reinforcement the newly developed window<br />
systems contribute to the decrease of the energy<br />
consumption in buildings. They are also suitable for<br />
the construction of passive houses. The steel-<strong>PVC</strong><br />
composite is fully recyclable.<br />
> Hanno Jooss<br />
> +49 9422 821 334<br />
> Germany<br />
katoen natie italia<br />
re-usaBle pvc liner for s-pvc fully recyclable by<br />
vinyloop ® process<br />
Since 2007 kTN Italia transported <strong>PVC</strong> in bulk by<br />
45’ container with a liner from the SolVin plant in<br />
Southern France to Cremona, where the content<br />
is unloaded into a silo. After unloading the liner<br />
is removed and the container is re-used to export<br />
Italian finished goods and not raw materials to the<br />
South of France. Before the project the bulk trucks<br />
returned 100% empty to France, today the 45’<br />
hybrid containers return from Italy to France 100%<br />
full of other palletized products.<br />
There’s just one problem: the single use liner to<br />
transport the <strong>PVC</strong> is made of polyethylene: and<br />
<strong>PVC</strong> and PE are not compatible… As the product<br />
transported from France to Cremona is always the<br />
same, was born the idea of a re-usable liner.<br />
After various unsatisfactory tests with liners of<br />
enforced PE and raffia PP, we found the solution<br />
with a liner made of polyester reinforced <strong>PVC</strong>. At the<br />
end of the life cycle, the liner coul go to the Vinyloop<br />
plant in Ferrara Italy.<br />
> Dirk Verwimp<br />
> +39 0372 415 521<br />
> Italy<br />
SolVin Award <strong>2010</strong> – 39<br />
Innovation Award
This project is based on the fact that certain<br />
pigments, even in very small doses ( Christian Kohlert, Bernd Schmidt &<br />
Walter Egenolf<br />
> +49 2602 915 357<br />
> Germany
kömmerling chemische faBrik<br />
polyurethane-based adhesive system for bonding<br />
insulating glass units to window casements<br />
By offering ködiglaze P, a product whose rheological<br />
properties can be adjusted with the help of <strong>PVC</strong>,<br />
köMMERLING has developed a special adhesive<br />
for the bonding of windows at the rebate base.<br />
This system opens up completely new possibilities<br />
for window constructors and system providers in<br />
realizing building designs. The bonding technique<br />
offers both technical and economic benefits, such<br />
as cost savings because less steel is used and<br />
less production effort is required, it provides better<br />
burglar protection and an improved insulation Uw<br />
value. The adhesive system and the edge bond<br />
of the insulation glass must be compatible and<br />
coordinated with each other. köMMERLING offers<br />
the edge bond and the adhesive system as an<br />
integrated concept from a single supplier.<br />
> Christoph Müller<br />
> +49 6331 561 118<br />
> Germany<br />
konraD hornschuch<br />
high-tech skai “cool colors plus” film for<br />
window profiles<br />
Skai “cool colors plus” film reflects the sun’s<br />
infrared rays so effectively, regardless of substrate,<br />
that even with extremely dark colors the heating of<br />
the laminated window or profile system is greatly<br />
reduced, preventing warping and deformation. This<br />
permits the use of non-steel plastic window systems<br />
in dark colors, contributing to a longer serviceable<br />
life and thus sustainability of the entire system. The<br />
“cool colors plus” film is effective in any type of<br />
solar radiation, whether moderate or strong. It has<br />
even been certified for colored windows systems in<br />
so-called “dry and hot climatic regions” such as in<br />
Southern Europe.<br />
> Rainer Irouschek<br />
> +49 7947 81 574<br />
> Germany<br />
SolVin Award <strong>2010</strong> – 41<br />
Innovation Award
konraD hornschuch<br />
“nature base” product range with skai evida, skai<br />
etano and skai ebamboo<br />
The newly-developed “Nature base” product range,<br />
with synthetic leathers skai Evida, skai Ebamboo<br />
and skai Etano, has been brought recently to<br />
the market. “Nature base” is a trend-setting<br />
development by Hornschuch that represents a<br />
world novelty. The aim has been to replace as many<br />
components as possible with natural and renewable<br />
resources, without influencing the wear resistance<br />
and longevity of the products. The product is<br />
more than 75% based on natural and renewable<br />
raw materials. Even if the formulation contains a<br />
large amount of sustainable, natural resources the<br />
product properties still fulfil stringent technical<br />
specifications. Compliance with Okotex Standard<br />
100 as well as Medical Product Law DIN EN ISO<br />
10993-5+-10 impressively demonstrates that a<br />
sustainable solution can also meet the highest<br />
technological specifications.<br />
> Gabriele Brenner<br />
> +49 7947 818 306<br />
> Germany<br />
42 – SolVin Award <strong>2010</strong><br />
kopos kolín<br />
pk 120x55 D and pk 210x70 D<br />
One of the origin products designed in kOPOS<br />
kOLIN by the department of construction and<br />
technical development are wiring boxes for<br />
flammable materials and assembly ring for<br />
mounting a box. As a sample we can mention<br />
fixation of the shielding canal in a plastic wiring<br />
trunking. For example parapet trunking type Pk<br />
120x55 D and Pk 210x70 D with hollow wall,<br />
wiring trunking elegant. Their characteristics are<br />
their double wall, their rigidity, a two compartment<br />
trunking and a complete system with accessories.<br />
> Jaroslav Topol<br />
> +42 0321 730 120<br />
> Czech Republik
kunstostoff museum<br />
kunststoffmuseum – more than 100 years of polymer<br />
history in troisdorf<br />
The kunststoffmuseum in Troisdorf displays<br />
the history of 100 years of plastic, with a focus<br />
on <strong>PVC</strong>. Evidence is presented in a compact<br />
and efficient way showing how lasting problem<br />
solutions have been developed and economical<br />
and environmentally-friendly successes have<br />
been reached with <strong>PVC</strong> over the decades. 1200<br />
exhibits and an extensive library show the exciting<br />
development of many plastic-related ideas –<br />
from the idea to products on the market today:<br />
the world’s first <strong>PVC</strong> window profile, the world’s<br />
first floor covering, the first bowling balls, lighter<br />
suitcases etc.<br />
> Wolfgang Pohl<br />
> +49 223 475 100<br />
> Germany<br />
lichter - extrusionstechnik<br />
“longerlife reed” for thatched houses<br />
Thin-walled conical tubes are extruded and used<br />
as long life reed material for thatched houses.<br />
A renewable raw material (thatch or reed) has<br />
been incorporated as filler into the polymer melt,<br />
giving a product visually similar to the WPC (wood<br />
plastic composite). The product is characterized<br />
by a superior fire resistance, does not shrink and<br />
the danger of rotting has been eliminated, thus<br />
extending the lifetime of the roof.<br />
> Heinz Lichter<br />
> +49 2552 2436<br />
> Germany<br />
SolVin Award <strong>2010</strong> – 43<br />
Innovation Award
lml<br />
self cleaning syphon<br />
<strong>PVC</strong> is the most used material to make siphons.<br />
This project aims to improve its functionality by<br />
making a part of it in flexible <strong>PVC</strong>. When a siphon<br />
is blocked, you have to contact a plumber to fix it.<br />
When you try to fix it yourself, it is very common<br />
that the siphon leaks afterwards. We have tried to<br />
improve the functionality by replacing the lower<br />
part of it by a flexible <strong>PVC</strong> tube, in a way that a non<br />
professional can easily unblock it by squeezing the<br />
tube. The gain is both on time and cost. It is also<br />
possible to prevent blocking by regular squeezing,<br />
since this is a clean, quick and easy job.<br />
> Luc Lodewyckx & Jos Mertens<br />
> +32 3 237 30 99<br />
> Belgium<br />
44 – SolVin Award <strong>2010</strong><br />
malip<br />
Digital printing on soft uncoated expanded pvc<br />
The digital printing on soft uncoated expanded<br />
<strong>PVC</strong>, into an industrial process, allows sophisticated<br />
printing for this kind of products, especially for short<br />
series, still at a same level of price. The process<br />
gives really new perspectives to a commonplace<br />
product.<br />
> Patrice Abelé<br />
> +33 320 764 231<br />
> France
mehler<br />
pvc-coated sound absorbing textile fabric<br />
The topic of acoustic design is becoming more<br />
and more significant in many areas of our daily<br />
life. Our performance is largely dependent on our<br />
well-being and on a stress-free environment. The<br />
point is to create an atmosphere that minimizes<br />
noise pollution. The Sound Absorption project<br />
represents a new innovative solution. The soundabsorbing<br />
textile fabric coated with <strong>PVC</strong> that has<br />
been developed has acoustic properties by virtue of<br />
dimensionally stable micropores and is especially<br />
suited for applications in interior architecture and in<br />
trade fair constructions. The highly sound-absorbing<br />
properties of the textile fabric reduce the impact of<br />
noise sources and offer additional possibilities for<br />
innovative interior design.<br />
> Carina Erdmann & Christian Callhoff<br />
> +49 2433 459 276<br />
> Germany<br />
novintiss<br />
pvc pan for sloped green roofs<br />
Novintiss designed a <strong>PVC</strong> pan for sloped green<br />
roofs. The Green Roofs market is young and high<br />
growth is expected. Green roofs bring excellent<br />
thermal insulation and soundproofing. Pans are<br />
needed for flat and sloped green roofs in order to<br />
maintain life of plants (water reservoir and drainage<br />
functions). Steel and polypropylene pans are used<br />
for sloped roofs (far more difficult than flat roofs).<br />
A <strong>PVC</strong> pan has been designed in order to bring<br />
stiffness, lightness and be easy to handle and<br />
assemble for making a complete green roof.<br />
The <strong>PVC</strong> pan is thermoformed. Workers prepare<br />
each pan (place geotextile, substrate and plants).<br />
The <strong>PVC</strong> pans are then placed on the sloped roof<br />
and are assembled together.<br />
> Serge Pelsy<br />
> +33 546 510 201<br />
> France<br />
SolVin Award <strong>2010</strong> – 45<br />
Innovation Award
omnova Wallcovering traDing as<br />
muraspec<br />
30% recycled content in fabric-backed vinyl<br />
wallcoverings<br />
The new specification for fabric-backed decorative<br />
vinyl wallcovering incorporates a minimum of 30%<br />
recycled content, when designed for use in contract<br />
environments (eg hotels, offices, public buildings,<br />
healthcare, restaurants and shops).<br />
A ground-breaking new process using previously<br />
unusable industrial waste <strong>PVC</strong>/paper/fabric<br />
composite, which would have otherwise ended up<br />
in landfill, can be seamlessly integrated within the<br />
wallcovering. There is no need to ‘hide’ the recycled<br />
content within a sandwich layer, which often gives<br />
unnecessary and wasteful additional weight to the<br />
finished product.<br />
Available in several designs across a number<br />
of colourways, the recycled content does not<br />
compromise in any way the design of the<br />
wallcovering aesthetically or performance-wise.<br />
Nor is there any price premium for the new recycled<br />
content designs.<br />
> Richard Wallington<br />
> +44 1442 883 068<br />
> United Kingdom<br />
46 – SolVin Award <strong>2010</strong><br />
ongaro giovanni, minghi tommaso<br />
unDergauntlet: an hygienic gauntlet to protect<br />
travelling people<br />
Our product is designed to meet the hygiene needs<br />
of those who travel by underground and other<br />
mass transit systems. In fact, our target includes<br />
all the individuals who everyday have to hold on to<br />
handrails, poles, straps etc. which are often dirty<br />
and cause a feeling of repugnance. This has led<br />
us to design a gauntlet concept which will allow<br />
passengers to hang on without having to worry<br />
about dirt, and will meet the growing need for<br />
hygiene. On the one hand, it meets the growing<br />
need for hygiene; on the other, it improves civil<br />
coexistence in crowded areas where the risk of<br />
contagion is higher.<br />
> Giovanni Ongaro & Tommaso Minghi<br />
> +34 7068 7335<br />
> Italy
ongropack<br />
ongroglow - pvc sheets and films having prolonged<br />
afterglow time<br />
The combination of fluorescent and phosphorescent<br />
pigments in transparent <strong>PVC</strong> carriers forms an<br />
illuminating system without external electric energy<br />
sources. Ongropack developed its innovative<br />
Ongroglow type film and sheet products having<br />
prolonged afterglow time.<br />
> Georgina Czók<br />
> +36 48 510 151<br />
> Hungary<br />
perlen<br />
perlaZiD ® - innovative, antimicrobial coatings on<br />
pvc films for highly efficient protection<br />
Perlen Packaging has developed PERLAzID ®<br />
antimicrobial coatings on <strong>PVC</strong> films for packing and<br />
protection in the medicinal and hygiene sectors<br />
as well as for the use in medical applications.<br />
These functional coatings make it possible to<br />
finish packaging surfaces and therewith to protect<br />
goods, both solid and liquid, against micro or<br />
putrefactive organisms, molds and yeasts with a<br />
previously unachievable efficiency. The broad scope<br />
of applications encompasses i.a. blisters, tablet<br />
transportation bags, medical wound coverings,<br />
mouth protection gear, clean room footmats for<br />
hospitals, stethoscopes and book covers.<br />
> Stefan Bokorny<br />
> +41 414 558 823<br />
> Switzerland<br />
SolVin Award <strong>2010</strong> – 47<br />
Innovation Award
pipelife international<br />
electro pipe with emi shielding properties<br />
Electric installation conduits with an added<br />
functionality: shielding of electromagnetic fields<br />
generated by electric current in the wires that are<br />
covered by the conduits. This phenomenon is also<br />
called “electrosmog”.<br />
Possible applications:<br />
– added functionality on electro pipes that<br />
contributes to the general health protection of<br />
people in buildings<br />
– extra protection of data in cables in those<br />
locations where data cables and power cables are<br />
in close proximity<br />
– prevent disruption of sensitive equipment in<br />
hospitals<br />
The electric conduits for installation of wire and<br />
cables can be either stiff/smooth or corrugated.<br />
> Jan de Boer<br />
> +31 228 355 544<br />
> The Netherlands<br />
48 – SolVin Award <strong>2010</strong><br />
pipelife international<br />
low smoke pvc electro pipe<br />
Polyvinyl chloride has a relatively high chlorine<br />
content. Therefore, many <strong>PVC</strong> compositions have<br />
good flame retardancy. This is especially true for<br />
unplasticized <strong>PVC</strong> compositions. Without special<br />
additives, rigid <strong>PVC</strong> complies with the fire test of the<br />
European standard for electro pipes (IEC 61386).<br />
However, a certain level of smoke development<br />
does occur when ordinary <strong>PVC</strong> electric conduits<br />
are set in fire. Although this particular standard<br />
does not contain requirements concerning smoke<br />
evolution, a reduction of the smoke evolution is<br />
desired.<br />
In the present invention, the <strong>PVC</strong> U formulations<br />
developed can favourably be extruded into electric<br />
conduits at a usual temperature. Besides a good<br />
processability, the pipes still have mechanical<br />
properties (bending, impact) in the same<br />
classification range. Under the conditions of a<br />
test often used for cables (IEC 61034), the new<br />
formulations give approximately 30% less smoke<br />
compared to the standard products.<br />
> Jan de Boer<br />
> +31 228 355 544<br />
> The Netherlands
pipelife international<br />
gas/safety stop<br />
Pipelife is developing a new fitting for the Polsafe<br />
system for gas distribution. The new fitting is a<br />
T-piece with an integrated gasstop. This gasstop<br />
closes and stops the gasflow when a pipe breaks<br />
(for example caused by excavation). So in this<br />
way the integrated gas-stop improves the safety<br />
of the gas distribution system by introducing an<br />
extra safety device. The product will be produced<br />
by injection moulding. The product is only for the<br />
Dutch market, because in other countries different<br />
systems are used for gas distribution.<br />
> Mark Ploeg<br />
> +31 228 355 563<br />
> The Netherlands<br />
pipelife international<br />
electro pipe with low friction inner layer<br />
Electric conduits for installation of wire and cables<br />
provided with a low friction inner layer (both for<br />
stiff / smooth and corrugated / flexible pipes).<br />
The product is manufactured by extrusion and is<br />
available on the market since january 2008. The<br />
product is patented. Electric conduits for installation<br />
of wire and cables provided with a low friction inner<br />
layer are available for both stiff or smooth and for<br />
corrugated / flexible pipes.<br />
Time and effort required to insert wires into electric<br />
conduits can be reduced, when using an electric<br />
conduit that is provided with a friction-reducing<br />
inside layer. A faster installation time means cost<br />
saving on the installation. The risk that wires are<br />
damaged is also reduced.<br />
> Jan de Boer<br />
> +31 228 355 544<br />
> The Netherlands<br />
SolVin Award <strong>2010</strong> – 49<br />
Innovation Award
pipelife international<br />
pvc drainage pipe with filter supported by pvc<br />
stripes<br />
The product is a new <strong>PVC</strong> flexible drainage pipe,<br />
which consists of a single wall corrugated pipe<br />
and a number of longitudinal extruded soft <strong>PVC</strong><br />
stripes which support a wrapped geo-textile. The<br />
structure supports the geo-textile so that between<br />
the pipe and the filter is left just the right space for<br />
the build-up of the necessary bed of soil particles.<br />
The production of the product can be in one step<br />
with the help of a special cross die-head, reducing<br />
the production costs. The product provides a<br />
stiffer filter with a better long-term performance.<br />
The production method is suitable for all filter<br />
types in respect to different soil particle sizes and<br />
different soils. The intergraded filter and its relevant<br />
characteristics (perforation density, number of<br />
stripes, diameter of stripes, geo-textile type) is build<br />
according to the required pipe performance which<br />
is described by the drainage standards.<br />
> Nikos Leontaridis<br />
> +31 228 355 601<br />
> The Netherlands<br />
50 – SolVin Award <strong>2010</strong><br />
plastico rototech<br />
ecological sport balls with hemp<br />
PLASTICO ROTOTECH, the leading French <strong>PVC</strong><br />
ball producer is proud to present you today the first<br />
ECOLOGICAL BALLS with HEMP. In a world where<br />
everyone is concerned with how humans interact<br />
with the ecosystems of the planet, it was our duty<br />
(as producer of sport articles for schools) to launch<br />
a ball that does not arm the nature. After many<br />
years of tests, we have finally managed to produce<br />
the first balls with HEMP.<br />
> Eric Michaud<br />
> +33 473 853 061<br />
> France
polinter<br />
easyfloor: profile co-extruded in rigid and flexible<br />
pvc for flooring<br />
Profile co-extruded in rigid and flexible <strong>PVC</strong> that<br />
facilitates the placement of technical floors, in a<br />
quicker, easier and more competitive way. Allows<br />
easier and cheaper maintenance also (no tools are<br />
required), it is possible to change only the damaged<br />
part of the floor. Furthermore it is also possible<br />
to easily change the design by interchanging the<br />
pieces location, while always ensuring the required<br />
performance of the floor.<br />
> Ricard Ramos<br />
> +34 935 641 350<br />
> Spain<br />
SolVin Award <strong>2010</strong> – 51<br />
Innovation Award
Cross-Box is a new developed system for the<br />
vacuum supply in extrusion lines used for the<br />
<strong>PVC</strong> profile extrusion. The actual systems consist<br />
in a certain number of servo controlled vacuum<br />
valves. The new one is based on a “one frequency”<br />
controlled vacuum pump, saving energy up to<br />
85% in comparison with the actual state of the<br />
art extrusion lines. Not only energy saving is the<br />
big benefit it increases also the stability of the<br />
production quality level. Each production line could<br />
earn € 10.000,- up to € 20.000,- in energy savings.<br />
52 – SolVin Award <strong>2010</strong><br />
politsch kunststofftechnik nominee<br />
cross-Box - reduced energy consumption in profile<br />
extrusion<br />
> Meinhard Schwaiger<br />
> +43 758 820 0150<br />
> Austria
An invisible change ... with a huge impact! Profel<br />
has developed a new system to reinforce large<br />
<strong>PVC</strong> windows and doors without compromising<br />
on their thermal insulation value. This has been<br />
possible by replacing the existing and classical steel<br />
reinforcements by a thermal interrupted profile<br />
with similar mechanical strength. This has been<br />
achieved by combining the thermal properties of<br />
plastic and the mechanical properties of steel in a<br />
new type of reinforcement-profile.<br />
profel nominee<br />
reinforcing pvc windows and doors while<br />
maintaining high thermal properties<br />
> Johan Lauwers<br />
> +32 11 809 800<br />
> Belgium<br />
SolVin Award <strong>2010</strong> – 53<br />
Innovation Award
protan<br />
protan profence – professional inflatable protection<br />
system<br />
Protan ProFence is a concept of inflatable safety<br />
products starting from industrial values – long<br />
life expectancy, strict demands on functionality<br />
over time and well-designed systems for care<br />
and maintenance. Only the newly developed<br />
textile reinforced <strong>PVC</strong> membrane could satisfy<br />
the high requirements foon strength, flexibility<br />
and durability. From the initiation of the project<br />
in September 2008, the development has this far<br />
resulted in safety systems for Speedway (launched<br />
May 2009), Skating (launched September 2009),<br />
and Alpine (launched May <strong>2010</strong>).<br />
> Mattias Markusson<br />
> +47 322 216 26<br />
> Norway<br />
54 – SolVin Award <strong>2010</strong><br />
rehau<br />
the new dimension in window construction:<br />
geneo – the fully reinforced window profile system<br />
The development of a new glass-fiber reinforced<br />
<strong>PVC</strong> core material, combined with a visually<br />
pleasing, easy-care and weather-resistant <strong>PVC</strong><br />
covering layer is the basis for the new GENEO<br />
window profile system. The glass-fiber reinforced<br />
<strong>PVC</strong> material RAU-FIPRO, combined with a special<br />
profile design, is presented as an innovative new<br />
generation of window profiles, which makes steel<br />
reinforcement redundant. The GENEO system<br />
is characterized by excellent thermal insulation,<br />
reduced weight and high stability, thus contributing<br />
to energy efficiency and resource conservation over<br />
the entire lifecycle of the <strong>PVC</strong>-window.<br />
> Thomas Rhönisch<br />
> +49 9283 772 080<br />
> Germany
enolit Belgium<br />
renolit solutions for solar roofs<br />
Alkorsolar is a lightweight non penetrating system<br />
to mount PV modules on a roof top relying on<br />
the excellent mechanical properties, durability,<br />
weldability and fire properties of Plasticized <strong>PVC</strong>. On<br />
a (existing) soft <strong>PVC</strong> waterproofing membrane, one<br />
welds the Alkorsolar soft <strong>PVC</strong> profiles containing an<br />
Aluminium insert.<br />
The waterproofing membrane is preferably a P-<strong>PVC</strong><br />
Alkorplan ® membrane of the type Alkorbright<br />
which is is coated with a low soiling acrylic coating.<br />
The resulting product is a unique waterproofing<br />
membrane with an exceptionally high Albedo<br />
(reflectivity) of around 97% that increases the<br />
production of electricity of PV modules of typically<br />
around 4%.<br />
For roof renewal, or new inclined roofs, Renolit<br />
proposes an alternative, the Heliotog system. This<br />
new designed corrugated <strong>PVC</strong> sheet combines<br />
mechanical strengths and fixing devices to mount<br />
PV cells.<br />
> François Rummens<br />
> +32 475 351 395<br />
> Belgium<br />
renolit iBerica<br />
floating cover for water swamps: cleaner water,<br />
avoiding evaporation<br />
Full system that allows easy and cheap installation<br />
of covers for water swamps. This system avoids<br />
contamination coming from the air, protecting the<br />
surface of the water. It also avoid to loose water<br />
by evaporation. Of course, the formulation of the<br />
side in contact with water is food approval, and the<br />
external side is formulated UV resistant in order to<br />
guarantee, either the quality of the water stored,<br />
and the durability of the sheet.<br />
> Juan Carlos Giralt<br />
> +34 938 484 241<br />
> Spain<br />
SolVin Award <strong>2010</strong> – 55<br />
Innovation Award
56 – SolVin Award <strong>2010</strong><br />
roaDcom<br />
ads on the move: truckadvertising system<br />
Roadcom innovation solves rigid panels truck<br />
advertising. A revolutionary free bolt system that<br />
is 20% cheaper and saves up to 90% fitting time<br />
compared to SAV. It is also safe and sustainable. It<br />
allows truck advertising as to promote fleets services<br />
or commercials for much shorter periods than what<br />
is available now.<br />
> Lionel Bro<br />
> +33 699 750 609<br />
> France
SureCel represents a breakthrough processing<br />
aid technology for rigid foam <strong>PVC</strong>. This technology<br />
relies on the reaction of the processing aid with <strong>PVC</strong><br />
to build a polymer network in the melt during the<br />
extrusion process. This leads to a specific rheology<br />
allowing for reductions in density, impossible to<br />
reach with existing processing aids.<br />
Reductions in density of up to 20% equate to not<br />
only lighter materials but also to a 20% reduction in<br />
the amount of <strong>PVC</strong> compound required to produce<br />
a specific linear length of foamed <strong>PVC</strong> product.<br />
Sheet thickness can also be increased while<br />
maintaining a good cell structure and modulus.<br />
SureCel can be used in place of conventional<br />
processing aids without adversely affecting product<br />
recycle and reuse. SureCel and foamed <strong>PVC</strong> are<br />
an innovative combination for sustainable building<br />
materials, saving raw materials.<br />
rohm anD haas<br />
surecel: breakthrough in processing aid<br />
technology for foamed pvc<br />
> Paul Van Rheenen & Eric G. Lundquist<br />
> +1 215 641 7171<br />
> France<br />
SolVin Award <strong>2010</strong> – 57<br />
Innovation Award
simona<br />
pvc plate with a wood design for deep-drawing<br />
applications<br />
Plastic door and window elements with a wood<br />
design and feel have very good weather resistance,<br />
low cost and high versatility. However, due to the<br />
different production steps, the profiles and the door<br />
leaves show slight differences in terms of visual<br />
appearance and feel. The project was motivated<br />
by the need to generate a semi-finished product<br />
that had exactly the same visual appearance and<br />
feel as the decoration film that it was based on.<br />
The semi-finished product had to be combined<br />
with the decoration film in a continuous process<br />
without using adhesives. To achieve this, a special<br />
apparatus was developed, designed and built,<br />
which can integrate the lamination directly into the<br />
plate production process. The process is configured<br />
in such a way that the embossed pattern typical<br />
of a film is retained and is even more resistant<br />
to the structural leveling that is typical for the<br />
thermoforming process.<br />
> Andreas Altmayer<br />
> +49 675 214 712<br />
> Germany<br />
58 – SolVin Award <strong>2010</strong><br />
sinepipe<br />
low cost, large diameter dual wall corrugated pipe<br />
Inadequate sanitation in developing countries<br />
has a high material impact on human health,<br />
social and economic development and ecosystem<br />
sustainability. In urban areas with high economic<br />
activities and large environmental impact every<br />
single Euro invested in a sewer infrastructure has<br />
4-10 Euro economic return. Sinepipe has developed<br />
a revolutionary, patented production technology<br />
for light weight <strong>PVC</strong> sewer and storm water pipes.<br />
Sinepipe reduces the capital investment of a total<br />
production line to 1/3. This radical innovation<br />
eliminates the expensive mold blocks that are<br />
characteristic for the state-of-the-art dual wall<br />
corrugated pipe production, but maintains the<br />
high benefits of this product. This unique Sinepipe<br />
innovation will make it possible to build affordable,<br />
long life sewer and storm water infrastructure in<br />
urban areas of developing countries resulting in<br />
improvement of public health, environment and<br />
economic development.<br />
> Thomas König<br />
> +31 624 217 626<br />
> The Netherlands
sioen inDustries<br />
pvc based coated textiles for food applications<br />
years ago Sioen actively responded to the needs<br />
of its customers by developing new <strong>PVC</strong> based<br />
qualities with reduced ecological impact. Our broad<br />
range of phthalate free <strong>PVC</strong> coated textiles is one<br />
example. Another more recent development deals<br />
with food grade <strong>PVC</strong> coated polyester fabrics that<br />
can be used as flexitank material for e.g. drinking<br />
water (B6303, 1100 g/m2 ) or as cover material<br />
for e.g. fruits and vegetables (B7303, 550 g/m2 ).<br />
Both products are fully compliant with European<br />
legislation (European Directive 2002/72/EC and<br />
its amendments) on food packaging materials,<br />
meaning that: all ingredients are listed on the<br />
European positive lists, individual and overall<br />
migration limits are respected, requirements with<br />
respect to smell and taste are respected. Detailed<br />
chemical analysis of numerous competitor products<br />
for food applications showed that Sioen’s products<br />
are unique!<br />
> Bert Groenendaal<br />
> +32 476 984 379<br />
> Belgium<br />
sioen inDustries<br />
anti-graffiti lacquers for pvc substrates<br />
Graffiti is a general problem in our society. Once<br />
applied onto walls, plastics, wood, etc. these<br />
substances are very difficult to get rid off.<br />
The same goes for graffiti on <strong>PVC</strong> coated polyester<br />
substrates. Since graffiti paints are all based on<br />
aggressive solvents, <strong>PVC</strong> coated textiles (e.g.<br />
trailer covers, tents & textile architectures, train<br />
covers, banners, etc.) are irreversibly damaged<br />
due to the penetration of its ingredients into the<br />
substrate. As a spin-off activity within the European<br />
project CONTEx-T, Sioen has developed a unique<br />
lacquer that can withstand these aggressive graffiti<br />
paints. This lacquer, which is based on advanced<br />
copolymeric species, can be applied by coating or<br />
spraying and results in an excellent barrier to all<br />
kinds of graffiti paints.<br />
> Bert Groenendaal<br />
> +32 476 984 379<br />
> Belgium<br />
SolVin Award <strong>2010</strong> – 59<br />
Innovation Award
sioen inDustries<br />
pvc based photovoltaic (pv) laminates<br />
Sioen produces ca. 75 Mio m2 of coated textiles<br />
per year, the majority being based on <strong>PVC</strong><br />
as coating material. Since 2008 Sioen has<br />
been actively researching the possibilities to<br />
incorporate electronics into such technical textiles.<br />
Examples are incorporation of light, electronic<br />
security systems, heating and photovoltaic cells.<br />
Incorporation of electronics strongly increases<br />
the functionality of the coated textiles and results<br />
in new materials for all kinds of applications.<br />
This submission is focussed on <strong>PVC</strong> based<br />
flexible photovoltaic laminates that can be (non-)<br />
permanently connected to <strong>PVC</strong> coated fabrics, e.g.<br />
for tents and textile architectures, trailers, etc. Sioen<br />
expects to commercialize its PV laminates by Q4<br />
<strong>2010</strong> under the name SioSOLAR.<br />
> Bert Groenendaal<br />
> +32 476 984 379<br />
> Belgium<br />
60 – SolVin Award <strong>2010</strong><br />
sioen inDustries anD Deceuninck<br />
thermoplastic uv curable coatings (laquers and<br />
links)<br />
Each year hundreds of millions m2 of <strong>PVC</strong> coated<br />
textiles are being lacquered with solvent-based<br />
lacquers worldwide. Since such lacquers typically<br />
consist of 10% solids and 90% solvents, this<br />
implicates enormous energy costs for drying and<br />
huge emissions of VOCs/CO to the environment<br />
2<br />
(solvents are burned > CO emission). Since mid<br />
2<br />
2008 Sioen Industries and Deceuninck have jointly<br />
worked on the development of thermoplastic UV<br />
coatings that can replace solvent based systems<br />
on short term. Due to unique combinations of<br />
monomeric and oligomeric species we have<br />
identified formulations that can be applied onto<br />
the <strong>PVC</strong> substrate via traditional rotogravure<br />
followed by UV curing under a set of UV lamps<br />
for instantaneous drying. The resulting materials<br />
combine good welding properties (thermal and HF)<br />
with similar mechanical properties, thermal and UV<br />
stability, flexibility, etc. as solvent based products.<br />
> Bert Groenendaal<br />
> +32 476 984 379<br />
> Belgium
Alvehol 1200 is a <strong>PVC</strong> pipe intended to be used for<br />
non-pressure underground drainage and sewerage<br />
systems with perfectly smooth internal and external<br />
surfaces.The pipe wall is not compact but consists<br />
in a sort of cells in the longitudinal direction. The<br />
wall structure can be regarded as a double T beam;<br />
this configuration gives equal mechanical properties<br />
but lower weight compared to a compact <strong>PVC</strong> pipe.<br />
Sirci Gresintex has developed an extrusion line for<br />
Alvehol pipe nominal diameter up to 1200 mm,<br />
with formulations containing new generation of<br />
stabilisers (“lead free”). Other advantages of Alvehol<br />
in the production process, are the lower material<br />
consumption in comparison with the same diameter<br />
pipe and mechanical properties, the easier handling<br />
during installation in difficult situations and the<br />
choice of non-toxic formulations.<br />
sirci gresintex nominee<br />
alvehol 1200<br />
> Stefano Pisoni<br />
> +39 07 592 981<br />
> Italy<br />
SolVin Award <strong>2010</strong> – 61<br />
Innovation Award
sirci gresintex<br />
pvc-o pressure pipes for conveyance potable water<br />
irrigation and industrial uses<br />
The project involves the production of <strong>PVC</strong>-O<br />
pressure pipes for conveyance drinkable water,<br />
irrigation and industrial uses. The process was<br />
made possible thanks to the phenomenon of biaxial<br />
molecular orientation during the production of<br />
rigid <strong>PVC</strong> pipes. In this way the molecular chains<br />
of <strong>PVC</strong> and their layout change from random to<br />
well organized type compared to a laminated. The<br />
process of molecular orientation developed by<br />
Molecor and licensed to Sirci Gresintex ensures<br />
high productivity and repeatability thanks to<br />
control temperature, pressure and strain rate<br />
during molecular orientation. In this manner <strong>PVC</strong><br />
pressure pipes improve the mechanical property<br />
and become a serious candidate for conveyance of<br />
pressurized fluids compared to other plastics pipes.<br />
The main advantages about using <strong>PVC</strong>-O pipes are:<br />
resistance to internal pressure, resistance to impact<br />
and accidental cuts, hydraulic performance, high<br />
flexibility, easy installation, energy efficiency.<br />
> Stefano Pisoni<br />
> +39 07 592 981<br />
> Italy<br />
62 – SolVin Award <strong>2010</strong><br />
skZ<br />
technology and application development for welding<br />
pvc-based wood-plastic composites<br />
The overall aim of the research project “Technology<br />
and Application Development for Welding Wood-<br />
Plastic Composites based on <strong>PVC</strong>” lies in in the<br />
analysis of the weldability of commercially available<br />
WPC formulations using heated tool butt welding,<br />
ultrasonic welding and vibration welding. The<br />
objective is to adapt the findings made so far of on<br />
current WPC welding processes and parameters<br />
in such a way that this new material can be joined<br />
using these welding techniques. The main focus<br />
of the research is on the optimization of the heated<br />
tool butt welding parameters and the determination<br />
of the basic weldability of WPC using ultrasonic and<br />
vibration welding.<br />
> Benjamin Baudrit<br />
> +49 931 4104 180<br />
> Germany
skZ<br />
evaluation and improvement of the economic<br />
efficiency of welding pvc window profiles<br />
The motivation behind this research project was<br />
based on the long overdue adjustment of the<br />
process parameters in heated tool butt welding to<br />
the current <strong>PVC</strong> formulations and welding machines<br />
for window profiles. The expected potential in<br />
terms of cycle time reduction could be clearly<br />
confirmed and successfully implemented. Each<br />
of the considered white profile types allowed a<br />
reduction of the cycle time by about 24%, along<br />
with increasing the weld strength by an average of<br />
17%. Profiles with outstanding weldability could<br />
even be welded up to 40% faster, while the weld<br />
quality according to valid quality guidelines would<br />
always be ensured. Thanks to the developed<br />
welding parameters, the efficiency of a window<br />
manufacturing line could be clearly increased and<br />
costs could be reduced without having to face<br />
quality losses, a higher environmental impact or<br />
additional investment costs.<br />
> Benjamin Baudrit<br />
> +49 931 4104 180<br />
> Germany<br />
socreDis<br />
symBioline project<br />
The SyMBIOline range of products is mainly<br />
marked out by the association of two materials:<br />
lacquered Aluminium outside and extruded <strong>PVC</strong><br />
inside. The mixed SyMBIOline range endows<br />
a better thermal insulation and better phonic,<br />
aesthetic and economical performances. By<br />
taking advantages of each material, we obtain a<br />
complete product which can either be used for new<br />
constructions or renovation markets.<br />
> William Bosquet<br />
> +33 241 961 800<br />
> France<br />
SolVin Award <strong>2010</strong> – 63<br />
Innovation Award
solvay Benvic iBerica<br />
ongoing project for implementing a power tri<br />
generation system<br />
More efficient, environmentally and economically,<br />
energy generation system, used in the <strong>PVC</strong><br />
compounding industry for generating electric<br />
power and chilling water for cooling down the<br />
<strong>PVC</strong> compounds. This “in site” system reduces<br />
losses of energy during its transportation, and by<br />
simultaneous generation, increases the efficiency.<br />
This fact allows to reduce the energy used per unit<br />
of weight of compound, minimizing the carbon<br />
footprint as well.<br />
> Marc Farràs Gassó<br />
> +34 935 686 221<br />
> Spain<br />
64 – SolVin Award <strong>2010</strong><br />
solvay Benvic iBerica<br />
soft pvc compounds for automotive and building<br />
applications<br />
Replacement of SBS/SEBS materials with soft <strong>PVC</strong><br />
formulations for automotive and building profile<br />
applications. These profiles improve economic<br />
competitiveness, offer better fire resistance, they<br />
match the properties needed in each particular<br />
case and are easier to convert, since they are also<br />
100% recyclable.<br />
> Javier Vivancos<br />
> +34 935 444 375<br />
> Spain
stuDio arkit & partners<br />
2 liters house: a building system with low<br />
environmental impact<br />
The “2 liters house project” is an integration of<br />
building systems with low environmental impact for<br />
the construction of residential buildings.<br />
It’s the result of a synergy between the design team,<br />
the developer and the construction company. This<br />
system performs in an excellent way in terms of<br />
energy savings; as far as the management and<br />
window insulation are concerned, there are no<br />
competitors that can provide the same limited<br />
environmental impact.<br />
It guarantees a low maintenance and a consistent<br />
performance over time.<br />
It is based on the respect for nature with an<br />
ambitious goal: zero environmental impact.<br />
> Alessandro Ballocchi<br />
> +39 051 444 242<br />
> Italy<br />
sveDaflex<br />
svedaflex pvc compounds with renewable plasticizer<br />
made from modified vegetable oils<br />
Svedaflex compounds are plasticized <strong>PVC</strong><br />
compounds made with a renewable plasticizer<br />
based on modified vegetable oil, which can be used<br />
to replace phthalate plasticizers. The renewable<br />
plasticizer is moderately priced so that it is possible<br />
to produce these compounds within the same price<br />
range as phthalate-containing <strong>PVC</strong>-compounds,<br />
thereby opening the way to high-volume<br />
applications. The new plasticizer has low migration<br />
and volatility values. The processing properties of<br />
Svedaflex compounds are identical to ‘standard’<br />
<strong>PVC</strong>-compounds. Properties like hardness, tensile<br />
strength, elongation at break etc. are very similar<br />
to those obtained with phthalate-containing<br />
compounds.<br />
> Roger Dahl<br />
> +46 707 797 310<br />
> Sweden<br />
SolVin Award <strong>2010</strong> – 65<br />
Innovation Award
technofrance<br />
a second life for pvc with the funeral vaults<br />
Funeral vaults made in <strong>PVC</strong> recycling. Today, the<br />
majority of funeral vaults are done in concrete. Vault<br />
done with profiles in <strong>PVC</strong> give several advantages<br />
such as: lightness of the products, decrease of the<br />
weight carried by the workers, possibility to adapt<br />
the size of the vault…<br />
> Jean-Louis Rivolta<br />
> +33 474 401 435<br />
> France<br />
66 – SolVin Award <strong>2010</strong><br />
the DoW chemical company<br />
sustainability through innovation: advapak neo<br />
heavy metal free pvc heat stabilizers<br />
In order for <strong>PVC</strong> to remain a material of choice for<br />
pipe and fittings, it must be part of a sustainable<br />
solution which takes into account not only its<br />
benefits to mankind but also its impact on natural<br />
resources and on the environment. <strong>PVC</strong> heat<br />
stabilizers must be considered as part of this<br />
sustainable solution and Advapak NEO provides<br />
the solution. Advapak NEO is based on latent<br />
mercaptan technology that provides <strong>PVC</strong> pipe<br />
producers with a lead free <strong>PVC</strong> heat stabilizer with<br />
good performance and a wide processing window.<br />
Advapak NEO’s excellent recycling properties; low<br />
metal content, low toxicity and ecotoxicity make it<br />
the choice for a more sustainable <strong>PVC</strong> future.<br />
> Jian-Yang Cho<br />
> +1 215 619 5102<br />
> France
travyl<br />
flexible innovative film with renewable raw materials<br />
This thin flexible film AGROVyL ® WOOD is <strong>PVC</strong><br />
based with wood filler. The market aimed at is<br />
stationery and graphic arts and more precisely:<br />
book cover protection, pockets, and small flexible<br />
printed “give away”. This film is not a lab curiosity<br />
as we sell it already since 2008. Our clients<br />
communicate on the fact that our product is<br />
“greener” than a classical thin gage <strong>PVC</strong> film.<br />
> Luc Chavany<br />
> +33 231 205 890<br />
> France<br />
university of salento<br />
carDanol: derived plasticizers for the pvc industry<br />
The innovative product is a plasticizer for <strong>PVC</strong><br />
obtained by chemical modification of cardanol,<br />
a very cheap resource with an industrial cost<br />
which is half the cost of DOP compared to similar<br />
chemical and physical properties. Cardanol and<br />
modified cardanol have been proven to be effective<br />
plasticizers for rubber. Derivatives of cardanol<br />
have also been proved to be efficient plasticizers<br />
for <strong>PVC</strong>. The cardanol molecule can be modified<br />
by esterification of the hydroxyl group, to obtain<br />
cardanol acetate, which can be used as secondary<br />
plasticizer of <strong>PVC</strong> in conjunction with traditional<br />
phthalates plasticizers. Up to 20 phr of cardanol<br />
acetate can be added to soft <strong>PVC</strong>. Cardanol acetate<br />
can be obtained in very high yields in a green<br />
process, which does not require the use of solvents,<br />
and uses very cheap reagents.<br />
> Antonio Greco<br />
> +39 832 297 233<br />
> Italy<br />
SolVin Award <strong>2010</strong> – 67<br />
Innovation Award
varteco Quimica iBerica<br />
phthalate free plasticizer, based on vegetable oil<br />
Use of kALFLEx plasticizers based on soybean<br />
oil together with appropriate technical support<br />
bring a solution to most of the end users requiring<br />
phthalate free plasticized <strong>PVC</strong> and/or willing to<br />
improve the sustainability of their products. The raw<br />
materials of these plasticizers are 100% renewable,<br />
and due that comes from vegetables, have also CO2 among them.<br />
> Diego García Touza<br />
> +34 657 603 749<br />
> Spain<br />
68 – SolVin Award <strong>2010</strong><br />
verseiDag – inDutex<br />
membrane structure for the new green point<br />
stadium, cape town, south africa<br />
The recently built new Green Point Stadium in Cape<br />
Town, South Africa, presents a new dimension<br />
of airiness in modern architecture. This high<br />
level of sophistication from an aesthetics point<br />
of view had to be combined with very high levels<br />
of technical demands in many aspects. For this<br />
reason the technical textiles from Verseidag-<br />
Indutex’s duraskin ® brand were the material of<br />
choice to build the façade of the stadium roof. This<br />
material combines high tenacity polyester yarn with<br />
a special <strong>PVC</strong> coating to provide architects with a<br />
material balancing optimum mechanical strength,<br />
translucency longevity and special acoustical<br />
properties. The product is now also available in a<br />
digitally printable version and used for both under<br />
ceilings as well as façades.<br />
> Peter Siemens<br />
> +49 2151 876 160<br />
> Germany
ZakłaDy lentex spółka akcyjna<br />
Biostatical pvc resilient floor covering based on<br />
nano silver particles<br />
We would like to present <strong>PVC</strong> Resilient Floor<br />
Covering with biostatical properties achieved by<br />
adding nano silver particles. This improvement in<br />
physical characteristics has been reached by using<br />
natural silver’s property instead of mostly dangerous<br />
and complicated chemical substances. The final<br />
products obtained are friendly not only for the<br />
environment but also for people.<br />
> Mariusz Suszka<br />
> +48 343 515 810<br />
> Pologne<br />
SolVin Award <strong>2010</strong> – 69<br />
Innovation Award
70 – SolVin Award <strong>2010</strong>
<strong>2010</strong><br />
recycling<br />
Award<br />
13 RICREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72<br />
AFFRESOL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72<br />
ART TERRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73<br />
BANNERBAGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74<br />
CHAIzE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75<br />
FITT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76<br />
G. FUMAGALLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77<br />
HAMOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78<br />
HTL ST. POELTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79<br />
MARIO SCHEICHENBAUER. . . . . . . . . . . . . . . . . . . . . 79<br />
MAVINIL (3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-81<br />
MEHLER TExNOLOGIES . . . . . . . . . . . . . . . . . . . . . . . 81<br />
OD PLAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82<br />
PLASTICANA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83<br />
PROFINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84<br />
TöNSMEIER kUNSTSTOFFE . . . . . . . . . . . . . . . . . . . . 85<br />
TRUCS-TROUVAILLES.COM. . . . . . . . . . . . . . . . . . . . . 85<br />
VINyLIT FASSADEN. . . . . . . . . . . . . . . . . . . . . . . . . . . 86<br />
VINyLTECH INTERNATIONAL . . . . . . . . . . . . . . . . . . . 86<br />
WEIDNER IBERICA . . . . . . . . . . . . . . . . . . . . . . . . . . . 87<br />
SolVin Award <strong>2010</strong> – 71<br />
Recycling Award
13 ricrea<br />
eco flower’s Wall: a nice way to recover pvc scraps<br />
Our idea is to reduce left over <strong>PVC</strong> using high<br />
quantity of scraps and cut off coming from any<br />
<strong>PVC</strong> converter. We developed a method to decorate<br />
outdoor walls of any kind.<br />
Maintenance: washable with water and soap<br />
These outdoor walls are modular panels mounted<br />
on stainless steel or aluminum structure. The<br />
panels are made of variable sizes (Max size of<br />
panel 140 cm x 300 cm) and can be removed for<br />
maintenance. Each panel will use from 40 to 80 kg<br />
of <strong>PVC</strong> scraps depending on the weight of the<br />
material itself.<br />
Colors: any color available<br />
Colors presented in this project come from Arimar<br />
company working in the soft boat industry.<br />
Outdoor eco flower’s wall can be applied in any<br />
condition. 13 Ricrea’s project uses a huge quantity<br />
of waste <strong>PVC</strong> rubber from the nautical pollutant<br />
waste and conferring a second life which improves<br />
our own: urban walls which are always fresh and<br />
ironic with minimal maintenance.<br />
> Ingrid Taro<br />
> +39 3486 513 333<br />
> Italy<br />
72 – SolVin Award <strong>2010</strong><br />
affresol<br />
processing of non-recyclable pvc waste and<br />
conversion into low cost housing and modular<br />
buildings<br />
<strong>PVC</strong> waste – that would have gone to landfill – is<br />
being converted using a cold low-energy process<br />
and re-used for an innovative low cost housing<br />
project by Affresol. Thermo Poly Rock (TPR)<br />
material uses waste plastics including <strong>PVC</strong> to<br />
produce a structural material which is waterproof,<br />
does not rot, is stronger than concrete, has a low<br />
‘U’ value and a long durability rating. TPR is being<br />
used to manufacture frames for low cost housing,<br />
targeting the sustainable homes code 4/5 rating.<br />
> Scott Phillips<br />
> +44 1792 581 197<br />
> United Kingdom
art terre<br />
outdoor seat « otari » in recycling material<br />
“pévétex ® ”<br />
Comfortable seat developed with an eco-conception<br />
approach and made of <strong>PVC</strong> recycling.<br />
> Letizia Asselin<br />
> +33 14 484 002<br />
> France<br />
SolVin Award <strong>2010</strong> – 73<br />
Recycling Award
Bannerbags has been trading since 2007 originally<br />
recycling banners seen in Liverpool to promote<br />
the Liverpool Capital of Culture. The company has<br />
continued to recycle banners from numerous events<br />
and advertising campaigns and is the only recycling<br />
company in the Uk converting <strong>PVC</strong> advertising<br />
material into fashion bags and accessories. We have<br />
today diverted more than twelve tonnes of material<br />
from landfill and converted them into reusable<br />
products.<br />
74 – SolVin Award <strong>2010</strong><br />
BannerBags nominee<br />
Bannerbags<br />
> Paul Gilbraith<br />
> +44 0125 458 2923<br />
> United Kingdom
chaiZe<br />
pévétex ® : pvc recycling raw material coming from<br />
automotive applications<br />
Pévétex ® is a new recycled raw material coming<br />
from automotive applications made of <strong>PVC</strong> and<br />
polyester, polyamide textiles.<br />
Pévétex ® are aggregates of 4 mm which are ready<br />
to use in applications such as leather store, paving<br />
stones of ground, furniture...<br />
> Bernard Chaize<br />
> +33 610 560 829<br />
> France<br />
SolVin Award <strong>2010</strong> – 75<br />
Recycling Award
The garden hose manufacturing process is based<br />
on the use of different kinds of plasticised <strong>PVC</strong><br />
compounds having various technical features and<br />
performances enabling to create the layers of the<br />
hose. We managed to use regenerated <strong>PVC</strong> up<br />
to 90%. This brings the possibility to lower the<br />
environmental footprint of our garden hoses.<br />
76 – SolVin Award <strong>2010</strong><br />
fitt nominee<br />
hose made of regenerated soft pvc<br />
> Rita Mascolo<br />
> +39 444 461 000<br />
> Italy
g. fumagalli<br />
recycled pvc profiles for street and garden furniture<br />
Profile extrusion product, which appears on the<br />
outside of a uniform color resulting from the use of<br />
virgin <strong>PVC</strong> and the inside of a dark color resulting<br />
from the use of recycled material.<br />
The G. Fumagalli, micro-enterprise artisan<br />
production, moved from the wooden window frames<br />
selection to milling, re-granulation, extrusion and<br />
assembly of finished products in recycled <strong>PVC</strong>,<br />
stood out for the creativity of its founder who,<br />
in order to raise public attention on the various<br />
possibilities of recovery of this material, has created<br />
the longest bench recycled in the world (25 mt. in<br />
one piece) in which the application of know-how,<br />
passion and experience for this work had a decisive<br />
role. In 1967 in the movie - The Graduate – Dustin<br />
Hoffman was told: “The future is in plastics”, now<br />
we can certainly say: “in that recycled!”<br />
> Graziano Fumagalli<br />
> +39 28 71 444<br />
> Italy<br />
SolVin Award <strong>2010</strong> – 77<br />
Recycling Award
The hamos WRS system generates clean milled<br />
<strong>PVC</strong> from <strong>PVC</strong> profile production waste, profile<br />
sections and old windows from demolition or<br />
modernization projects. The process is fully<br />
automatic, i.e. no manual presorting is required.<br />
The window profile sections are crushed, dusted<br />
and separated from rubber or flexible-<strong>PVC</strong> seals<br />
and other incompatible plastics by an EkS<br />
electrostatic separation system, using the different<br />
electrostatic charging behavior of rigid <strong>PVC</strong>, rubber<br />
and flexible <strong>PVC</strong>. After the separation cycle the <strong>PVC</strong><br />
is already approx. 99.5% pure. The opto-electronic<br />
color sorter then eliminates colored impurities, so<br />
that the obtained recycled <strong>PVC</strong> is ultra pure. At<br />
the end of the hamos WRS recycling process is<br />
high-quality recycled <strong>PVC</strong> which can be used as a<br />
high-quality raw material for the production of new<br />
<strong>PVC</strong> windows.<br />
78 – SolVin Award <strong>2010</strong><br />
hamos nominee<br />
reclaimed pvc from waste window profiles using<br />
hamos Wrs system<br />
> Rainer Koehnlechner<br />
> +49 8856 9261 88<br />
> Germany
htl st. poelten<br />
ideas against waste for the climate protection<br />
The project “IDEAS AGAINST WASTE – <strong>FOR</strong> THE<br />
CLIMATE PROTECTION” shows that even <strong>PVC</strong>waste<br />
can be used and recycled and therefore<br />
leads to waste-reduction and to the protection of<br />
our nature and climate. Semi finished sheets, which<br />
are ‘waste’ of the company Schubert Electrical<br />
Construction Company, are rebuilt to switch<br />
connecting boxes, to insulation covers for products<br />
as well as to exercising-products for pupils for<br />
warmgas-rhipidium-welding exercises.<br />
> Kurt Umgeher<br />
> +43 274 275 051-0<br />
> Austria<br />
mario scheichenBauer<br />
Brik plast: r-pvc profiles for wall partitions in<br />
buildings<br />
BRIkPLAST partitions are a component made of<br />
extruded <strong>PVC</strong> to build partition walls. BRIkPLAST<br />
partition is plastered after installation. A given<br />
color, a good finishing or an U.V. protection are not<br />
requested. It can be made with recycled <strong>PVC</strong>.<br />
BRIkPLAST partition has a big market. Italian<br />
market of partitions in hallowed brick is 630 Mmq/<br />
year. BRIkPLAST partition compared with hollow<br />
brick partition and plaster paper panel, is:<br />
– CHEAPER: save from 20% to 25%<br />
– LIGHTER: 40% less of hollow brick partition<br />
– QUICkER: quicker installation<br />
together with an excellent acoustic, thermal, and<br />
fire behavior characteristics; together with less work<br />
for electrical, hydraulic, heating installations and<br />
with a very low investment for production plants.<br />
> Mario Scheichenbauer<br />
> +39 0276 005 900<br />
> Italy<br />
SolVin Award <strong>2010</strong> – 79<br />
Recycling Award
mavinil<br />
recycling of end of life conveyor belts<br />
The Mavinil’s technology allows recovering <strong>PVC</strong><br />
coming from end of life conveyor belts, avoiding<br />
landfill and obtaining <strong>PVC</strong> ready for a second life.<br />
This process is based on cyclonic technology, and<br />
obtains <strong>PVC</strong> ready for a second life by separation<br />
from the fibres, taking advantage of the difference<br />
of densities between the two fractions.<br />
> Francesc Riera<br />
> +34 93 867 62 36<br />
> Spain<br />
80 – SolVin Award <strong>2010</strong><br />
mavinil<br />
recycling of pvc plasticized pipes reinforced with a<br />
rigid pvc spiral<br />
The Mavinil’s technology allows to recycle <strong>PVC</strong><br />
pipes with rigid and P-<strong>PVC</strong>s, obtaining two<br />
homogeneous R-<strong>PVC</strong>.This process is based on<br />
the different melting point of both <strong>PVC</strong>s (rigid and<br />
plasticized), that makes them perform in a different<br />
way one in comparison to the other, allowing the<br />
separation.<br />
> Francesc Riera<br />
> +34 93 867 62 36<br />
> Spain
mavinil<br />
recycling of end of life advertising banners pvc<br />
made<br />
The Mavinil’s technology allows the recovery of <strong>PVC</strong><br />
advertising banners, avoiding landfill and obtaining<br />
<strong>PVC</strong> ready for a second life, with no consumption<br />
of non renewable raw materials. Due to the visual<br />
impact of the banners, their short cycle life and the<br />
fact that it’s a product used in a public area, this<br />
solution ensures a correct end of life impact, and a<br />
suitable recycled raw material for a new application.<br />
> Francesc Riera<br />
> +34 93 867 62 36<br />
> Spain<br />
mehler texnologies<br />
green products mehler texnologies<br />
The developed technology enables shredded<br />
tarpaulin waste to be incorporated into new<br />
products without compromising quality. This is a<br />
further step toward solving the problem of recycling<br />
of polyester and <strong>PVC</strong> composites.<br />
> Ellen Keulen & Christian Callhoff<br />
> +49 2433 459 270<br />
> Germany<br />
SolVin Award <strong>2010</strong> – 81<br />
Recycling Award
The product is a new and high quality foundation<br />
drainage pipe with a corrugated outer wall made<br />
with 70% joinery recycled post-consumer scraps.<br />
They aim at an accurate and quick slope tune-up.<br />
82 – SolVin Award <strong>2010</strong><br />
oD plast nominee<br />
high quality drainage pipe with high content of<br />
post-consumers rigid pvc scraps<br />
> André Cordelier<br />
> +33 299 765 353<br />
> France
plasticana<br />
shopping bag recyclable and/or reusable as<br />
gardener<br />
Shopping bags conceived with solded sheets of<br />
Plasticana (composites <strong>PVC</strong> and Hemp). After<br />
usage, the shopping bags could directly be sent to<br />
the company for recycling (address printed on the<br />
bag) or could be used as a gardener. The presence<br />
of Hemp allows the storage of carbone coming from<br />
photosynthesis.<br />
> André Ravachol<br />
> +33 148 047 771<br />
> France<br />
SolVin Award <strong>2010</strong> – 83<br />
Recycling Award
kBE System_88mm is the latest product from the<br />
profine Group. With a maximum use of recycled<br />
material (50%) and a lead-free <strong>PVC</strong> formulation, a<br />
window system was developed, which meets the<br />
most stringent energy efficiency and CO 2 emission<br />
reduction requirements. The result is spectacular,<br />
with a heat insulation Uf value of less than 0.79<br />
W/m²k, contributing thus to the protection of our<br />
environment. All product characteristics combined,<br />
kBE System_88mm is the best possible window<br />
system made of <strong>PVC</strong> – not only from an ecological<br />
point of view, but also in terms of functionality,<br />
appearance and comfort!<br />
84 – SolVin Award <strong>2010</strong><br />
profine<br />
kBe system_88mm<br />
window and door system<br />
> Marc Habermeyer<br />
> +49 224 199 530<br />
> Germany
tönsmeier kunststoffe<br />
proof of the positive impact of use of recycled pvc<br />
on the product carbon footprint compared with virgin<br />
pvc<br />
A calculation of the Product Carbon Footprint of<br />
the milled and granulated <strong>PVC</strong> made by Tönsmeier<br />
kunststoffe. kG demonstrates the ecological benefit<br />
of recycled plastic compared to virgin <strong>PVC</strong>. As the<br />
resource-saving recycling process emits significantly<br />
less greenhouse gases than the production of virgin<br />
<strong>PVC</strong>, this market-leading recycler and its customers<br />
in the plastics processing industry make a notable<br />
contribution to reducing global climate change<br />
and to the improvement of the eco-balance. With<br />
its environmentally friendly and resource- saving<br />
production in terms of sustainable value added,<br />
Tönsmeier takes the lead in the recycling industry<br />
while supporting the further improvement of the<br />
image of <strong>PVC</strong> as well as the use of recycled goods.<br />
> Marc Schmidt<br />
> +49 5271 972 251<br />
> Germany<br />
trucs-trouvailles.com<br />
trucs-trouvailles.com collection<br />
Trucs-trouvailles has developed a recycled version<br />
of artificial leather, which has different properties<br />
in terms of Density and color to make it a real new<br />
material. It can be exported as a raw material but<br />
also as finished products.It is a new raw material;<br />
coming 100% from recycling; designed to be used<br />
in all circumstances in which we can use rubber<br />
like: Shoes, Clogs, flip flops, films, cut from bulk,<br />
leather goods.<br />
> Sylvie Dameron<br />
> +33 147 006 610<br />
> France<br />
SolVin Award <strong>2010</strong> – 85<br />
Recycling Award
vinylit fassaDen<br />
vinytherm - a clever combination of pvc and<br />
natural stone<br />
VinyTherm presents a unique combination of <strong>PVC</strong><br />
and natural stone. The product, produced by an<br />
in-line natural stone coating on a foam coated<br />
<strong>PVC</strong> profile, is fully recyclable. The material has<br />
improved weather resistance and mechanical<br />
properties. As a curtain-type, rear-ventilated façade<br />
the wall structure saves significant amounts of<br />
energy.<br />
> Stefan Schmatz<br />
> +49 561 9591 300<br />
> Germany<br />
86 – SolVin Award <strong>2010</strong><br />
vinyltech international, llc /<br />
extrusion solutions, llc<br />
synergistic effect of tooling, process & materials<br />
management to utilize recycled rpvc<br />
Sulzer Chemtech, along with their consortium<br />
partners, Vinyltech International, LLC and Extrusion<br />
Solutions, LLC has developed a proprietary process<br />
of tooling, Process Enhancement, and Materials<br />
Management to allow Extrusion Processors to<br />
recycle both their scrap as well as Post-Consumer<br />
Materials available in the market place. Materials<br />
Testing validates no loss of properties and can<br />
increase ductility of recycled <strong>PVC</strong>. Online testing of<br />
processing parameters utilizes Statistical Process<br />
Capability techniques to determine the “Mean &<br />
Standard Deviation” factors and adjust the process<br />
accordingly.<br />
> Daniel Cykana & Rolf Heusser<br />
> +41 52 262 6791<br />
> Switzerland
Weidner technology allows the use of <strong>PVC</strong> waste<br />
mixed with impurities, being able to make large<br />
pieces at a very competitive cost when compared<br />
with traditional techniques.<br />
The innovation lies in the adaptation and<br />
optimisation of our machines for direct injectionextrusion<br />
of large volume materials, with almost no<br />
previous treatment or processing, especially <strong>PVC</strong><br />
wastes from cables, that would have no further use<br />
other than being disposed of in landfills.<br />
WeiDner iBerica nominee<br />
new injection systems for converting difficult plastic<br />
wastes<br />
> Laura Lapuente<br />
> +34 962 532 359<br />
> Spain<br />
SolVin Award <strong>2010</strong> – 87<br />
Recycling Award
88 – SolVin Award <strong>2010</strong>
<strong>2010</strong><br />
Design<br />
Award<br />
13 RICREA (2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90<br />
ACE OF PLUGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91<br />
ANNE-SOPHIE BOURGOGNE . . . . . . . . . . . . . . . . . . . 91<br />
BARRAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92<br />
BEA SzENFELD FASHION TEAM . . . . . . . . . . . . . . . . . 92<br />
BI API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93<br />
CIxOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93<br />
FERRARI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94<br />
FIRST REPUBLIk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94<br />
IDEFLEx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95<br />
LML. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96<br />
MARTINA DOLL (3) . . . . . . . . . . . . . . . . . . . . . . . . 97-98<br />
MOLUSk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99<br />
My NOTE DECO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100<br />
NICOLL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100<br />
OCEPLAST (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101<br />
PALIüTIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102<br />
PIERLUIGI CAMPAGNOLA . . . . . . . . . . . . . . . . . . . . . 102<br />
SOLVAy BENVIC IBéRICA. . . . . . . . . . . . . . . . . . . . . . 103<br />
STUDIO SøREN DAHLGAARD . . . . . . . . . . . . . . . . . . 103<br />
WALLCOVERING PUBBLICITA . . . . . . . . . . . . . . . . . . 104<br />
zICLA (2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-106<br />
zWEINULLVIER WERBEAGENTUR. . . . . . . . . . . . . . . 107<br />
SolVin Award <strong>2010</strong> – 89<br />
Design Award
13 ricrea<br />
eco outdoor garden components: with 100%<br />
recycled pvc<br />
The products we create use 100% recycled <strong>PVC</strong>.<br />
Our material is supplied by manufacturers of<br />
inflatable products, tensile structures and other<br />
firms that have a large quantity of <strong>PVC</strong> waste either<br />
in the form of cut-offs or remains from spools. We<br />
use all shapes and sizes of waste <strong>PVC</strong>, from large,<br />
shapeless pieces to small scraps.<br />
We have invented a method to ensure the durability<br />
of this material for outdoor use, one which improves<br />
our lifestyles and ensures a florid and colourful<br />
atmosphere for our gardens and open-air spaces<br />
with minimal maintenance.<br />
The idea is a carbon-zero process which is both<br />
constructive in social and economical terms.<br />
We produce outdoor furnishings, garden flowers,<br />
poufs of various sizes, benches, vases suitable for<br />
all weather conditions.<br />
13 Ricrea’s project uses a vast quantity of <strong>PVC</strong><br />
waste, improving our own living spaces which are<br />
always fresh and ironic with minimal maintenance!<br />
> Ingrid Taro, Cristina Merlo & Angela Mensi<br />
> +39 3486 513 333<br />
> Italy<br />
90 – SolVin Award <strong>2010</strong><br />
13 ricrea<br />
pvc in water: an idea for outdoor spaces<br />
The product we want to create is made of 100%<br />
recycled <strong>PVC</strong>.<br />
The scraps we use come from manufacturers of<br />
inflatable products.<br />
We have invented a chair to ensure the durability of<br />
this material for outdoor use, one which improves<br />
our lifestyles and ensures a florid and colourful<br />
atmosphere for our outdoor spaces and open-air<br />
spaces with minimal maintenance.<br />
The product is manufactured with scarps of<br />
soft boats, uses the cut off and it is fixed on an<br />
aluminium structure.<br />
It could be an idea for outdoor spaces such as<br />
restaurant, bar and beaches, light and ironic at the<br />
same time.<br />
> Ingrid Taro, Cristina Merlo & Angela Mensi<br />
> +39 3486 513 333<br />
> Italy
ace of plugs<br />
ace of plugs<br />
The Ace of Plugs is a standard size sink or bath<br />
plug that will fit any standard sink or bath due to its<br />
complete adjustability. There is only one product<br />
in the market today that prevents overflowing<br />
sinks and baths, but where the Ace Of Plugs has<br />
a big advantage is that it is completely adjustable<br />
and can operate from a few centimetres to a full<br />
sink, whereas the other product is static and can<br />
not operate in less than 12 centimetres of water.<br />
The Ace of Plugs is also half the size of the other<br />
product and does not require a chain as it has its<br />
own docking station.<br />
It is an everyday product that will be used by<br />
everybody at least twice a day. Its attractiveness<br />
and its visibility make it the perfect tool in every<br />
household to prevent water damage.<br />
> Tony Gilmore<br />
> +44 1216 813 585<br />
> United Kingdom<br />
anne-sophie Bourgogne<br />
strip.v.c. textile application for several uses, made<br />
with recycled pvc<br />
For dressing floors, walls or furniture, a collection of<br />
coatings based on <strong>PVC</strong> surfaces. <strong>PVC</strong> laminations<br />
resulting from trimmings and second choices<br />
are associated with yarn coated by the Vinyloop<br />
process and other materials in order to create a<br />
series of smooth or textured surfaces with rhythmic<br />
graphics. The use of R-<strong>PVC</strong> powder in the course of<br />
the process enables clouded or aged effects to be<br />
obtained, in coherence with the woven structure.<br />
The surfaces can be thermoformed.<br />
> Anne-Sophie Bourgogne<br />
> +34 687 203 057<br />
> Spain<br />
SolVin Award <strong>2010</strong> – 91<br />
Design Award
Barrain<br />
urban furnitures: public benches<br />
Public benches made of <strong>PVC</strong> and natural fibers<br />
(Hemp) and created on the basis of an ecoconception<br />
approach. Mixing <strong>PVC</strong> (40%) and Hemp<br />
(60%) gives the following advantages: resistance,<br />
strength, no treatment needed…<br />
> Christophe Barrain<br />
> +33 233 494 209<br />
> France<br />
92 – SolVin Award <strong>2010</strong><br />
Bea sZenfelD fashion team<br />
fantastic plastic - pvc fashion from production<br />
waste<br />
The ‘Fantastic Plastic’ collection is made entirely out<br />
of production waste from manufacturers in Sweden.<br />
The colorful <strong>PVC</strong> bands have been used to create<br />
various dresses in a retro style. The artist’s idea was<br />
to inspire people and to show that we are able to<br />
create extraordinary clothes and accessories from<br />
reused <strong>PVC</strong>. Plastic IS fantastic !!<br />
> Bea Szenfeld<br />
> +46 736 896 316<br />
> Sweden
Bi api<br />
anne-charlotte goutal: a world of vinyl accessories<br />
with acidulous colors and trendy icons<br />
Anne-Charlotte Goutal is a French original brand<br />
specialized in vinyl goods.<br />
The Anne-Charlotte Goutal line offers endless<br />
choices of accessories & goodies which are very<br />
«air du temps», practical and trendy with fun colors<br />
and icons.<br />
How does it work?<br />
Every point of sales has the possibility to create<br />
its own assortment according to its customer’s<br />
expectations and needs.<br />
3 steps to personalize a product:<br />
1. The Personalization of all products.<br />
2. The Personalization of all products with classic<br />
and fashion icons: in total, a choice of 52 icons.<br />
3. The personalization of all the models with choices<br />
of different colors: in total, a choice of 22 colors.<br />
> Fabienne Torche-Kessler<br />
> +33 609 392 404<br />
> France<br />
cixous<br />
pvc frame for photovoltaic/solar panels<br />
Cixous offers <strong>PVC</strong> frame for photovoltaic/solar<br />
panels. This concept gives the user the opportunity<br />
to integrate the <strong>PVC</strong> in the process of sustainable<br />
development with the aim of reducing the costs of<br />
fabrication.<br />
<strong>PVC</strong> frame for photovoltaic/solar panels gives the<br />
consumer the opportunity to use the qualities<br />
of <strong>PVC</strong> (good heat resistance, good exterior<br />
resistance, good resistance to bad weather and<br />
prices competitive) in the process of sustainable<br />
development. Indeed, using this material could<br />
reduce the installation costs of photovoltaic/solar<br />
panels.<br />
> Cixous<br />
> +33 665 144 433<br />
> France<br />
SolVin Award <strong>2010</strong> – 93<br />
Design Award
ferrari<br />
technical polyester pvc fabric making possible hightech<br />
inflatable keder<br />
Ferrari offers new inflatable keder for large tents<br />
having double or triple walls for thermal and<br />
acoustic insulation.<br />
The product is a PET/<strong>PVC</strong> fabric having two sides<br />
coated with one of them coated with very precise<br />
non coated stripes. This non coated side is used<br />
in a keder confection like a sliperry side when the<br />
keder has to be introduced in an aluminium rail in<br />
order to make the jonction between the structural<br />
aluminium rails and the roofs mainly used for tent<br />
industry.<br />
This keder has also an inflatable tube making hard<br />
tension on the membranes possible.<br />
> Carlos Saiz<br />
> +33 608 278 715<br />
> France<br />
94 – SolVin Award <strong>2010</strong><br />
first repuBlik<br />
Bandit<br />
BANDIT, developed by First Republik, is a playfull<br />
stool conceived in an “ECO” oriented philosophy,<br />
where the idea of giving a second life to plastic<br />
waste was central to the project.<br />
> Emmanuel de Buzonnière<br />
> +33 609 525 979<br />
> France
iDeflex<br />
pvc micro pearls for the creation of aesthetic effects<br />
(3-D volume effect)<br />
<strong>PVC</strong> micropearls is a new product from the<br />
flake range for <strong>PVC</strong> floorings and wallcoverings.<br />
Micropearls brings a new 3-D volume aesthetic.<br />
> Jean Michel Dondé<br />
> +33 476 217 925<br />
> France<br />
SolVin Award <strong>2010</strong> – 95<br />
Design Award
<strong>PVC</strong> and Nature is a concept seeking to merge<br />
recycled <strong>PVC</strong> with plants in our daily environment,<br />
in parks, greenhouses, public spaces, verandas…<br />
<strong>PVC</strong> is the major support for these creations, using<br />
different forms and colors to integrate the creative<br />
item into the environment and make it appear less<br />
industrial.<br />
96 – SolVin Award <strong>2010</strong><br />
lml nominee<br />
pvc and nature<br />
> Luc Lodewyckx & Jos Mertens<br />
> +32 3 237 30 99<br />
> Belgium
martina Doll<br />
silhouettes and shadows: colours and shapes made<br />
with plasticized pvc<br />
“Silhouettes and Shadows” is a concept for<br />
attractive designs of walls and flexible partitions.<br />
Using colored films of flexible <strong>PVC</strong> like an aesthetic<br />
material opens new ways for creativity. The<br />
combination of <strong>PVC</strong> silhouettes with wall painting<br />
and illumination are creating unique “light- and<br />
shadow-staging” alive with lightness and vividness.<br />
> Martina Doll<br />
> +34 620 33 94 11<br />
> Spain<br />
martina Doll<br />
twilight staging<br />
“Twilight Staging” is a concept for attractive designs<br />
of walls and flexible partitions with special effects<br />
of mystery caused from black light fluorescent<br />
tubes. Using films and strings of fluorescent colored<br />
<strong>PVC</strong> like an aesthetic material opens new ways for<br />
creativity. The combination of different products of<br />
<strong>PVC</strong> with wall painting and illumination are creating<br />
unique “mystery-staging”.<br />
> Martina Doll<br />
> +34 620 33 94 11<br />
> Spain<br />
SolVin Award <strong>2010</strong> – 97<br />
Design Award
“Materialised Light” is a concept for attractive<br />
designs of walls and flexible partitions. Using films<br />
of flexible <strong>PVC</strong> like an aesthetic material and like<br />
a transistor of light opens new ways for creativity.<br />
The combination of the <strong>PVC</strong> “light shapes” with<br />
wall painting and illumination are creating unique<br />
“light- and shadow-staging” alive with lightness and<br />
dynamic.<br />
98 – SolVin Award <strong>2010</strong><br />
martina Doll nominee<br />
materialised light<br />
> Martina Doll<br />
> +34 620 33 94 11<br />
> Spain
Inspired by the Ocean, Molusk jewels are creative<br />
in the extreme. Diverse techniques such as silkscreening,<br />
using a multitude of colours and patterns<br />
as well as metallic gilding, allow the plastic to<br />
metamorphose into refined and stylish designs. This<br />
soft flexible jewellery seems to adapt and become<br />
part of the body.<br />
molusk<br />
molusk: aquatic jewelry<br />
> Lucille Saliou & Anthony Masure<br />
> +33 155 42 15 04<br />
> France<br />
SolVin Award <strong>2010</strong> – 99<br />
Design Award
TIeS<br />
to fit perfectly into different roofing<br />
ong thermic amplitudes.<br />
develop high technicity products<br />
is the perfect illustration<br />
d to facilitate a reliable and optimised<br />
ns roofs, aesthetic rainwatershoe…)<br />
ipes diameters makes<br />
r.<br />
S<br />
rved outlines of the outlet allow<br />
S<br />
my note Deco – groupe impex<br />
air concept ®<br />
AIR CONCEPT ® , inflatable yet stylish furniture as<br />
free as the air. This new generation of inflatable<br />
furniture is practical, trendy and polyvalent. It can<br />
be taken anywhere, used anywhere in the home or<br />
in the garden and respects the environment (it can<br />
be recycled!). INDOOR and OUTDOOR collections.<br />
> Adeline Jouan<br />
> +33 476 326 988<br />
> France<br />
100 – SolVin Award <strong>2010</strong><br />
your contact from Nicoll Network.<br />
37, rue pierre et Marie curie - Bp 10966 - 49309 cHOLeT cedex<br />
Tél. 02 41 63 73 83 - Fax 02 41 63 73 84 - email : info@nicoll.fr<br />
Technical Data - tech-info.nicoll@aliaxis.com<br />
GuLFSTreAM - rc Nantes B 389 788 993 - NIcO 002 - 06/09 - crédits photos : Shutterstock.<br />
SMALL DeTAILS THAT MAke A BIG DIFFereNce<br />
nicoll<br />
Traditional design reinvented<br />
Anti-leaking and anti-dirtying<br />
device on the front of<br />
the gutter’s profile<br />
n e w<br />
V o d a l i s<br />
s y s t e m<br />
Frost and heat resistance<br />
new pvc gutter system (vodalis)<br />
comfortable and reliable<br />
installation<br />
High hydraulic capacity system<br />
cVDL09GB<br />
With the new Vodalis gutter system, Nicoll, 1st European producer of <strong>PVC</strong> products for building<br />
and Public Works, reinvents the traditional rainwater<br />
by adding small details that make a big difference…<br />
From innovative & patented solutions to specific<br />
aesthetic and environmental studies, the Vodalis<br />
system offers an original solution to the European<br />
market evolution.<br />
> Charles Poisson<br />
> +33 241 637 383<br />
> France
t<br />
s<br />
s<br />
s<br />
s<br />
s<br />
T<br />
t<br />
s<br />
x<br />
T<br />
s<br />
t<br />
n<br />
let Roulant<br />
complément du Blanc,<br />
Ton Sable, Sable, Gris clair et Ton Pierre.<br />
Blanc vrcolor Sable<br />
® , the roller shutter blade combining the<br />
insulation of pvc and the colour of aluminium<br />
Ton<br />
Pierre<br />
oceplast<br />
Les nombreux tests mécaniques et<br />
fonctionnels réalisés sur la lame et<br />
les tabliers ont permis la résolution de<br />
différents obstacles justifi ant le dépôt<br />
d’un brevet.<br />
Réalisées en <strong>PVC</strong> homologué LNE, les<br />
lames VRColor® 43mm et 58mm sont<br />
destinés au chantiers neufs ou à la<br />
rénovation.<br />
Quelle que soit leur couleur, elles sont<br />
éligibles au crédit > +33 d’impôt 251 483 034 en présentant<br />
> France<br />
un coeffi cient de résistance thermique<br />
supérieur à 0,21 m2.K/W.<br />
OCEPLAST SARL<br />
Zone Industrielle des Blussières<br />
85190 AIZENAY<br />
Tél. 02 51 48 30 34<br />
Lame de 43 mm<br />
Lame de 58 mm<br />
In order to revitalise the <strong>PVC</strong> roller shutter market<br />
segment, OCEPLAST has designed a range of<br />
panels called VRColor<br />
Gris<br />
® combining the insulating<br />
properties of <strong>PVC</strong> with the diversity of RAL colours<br />
for Aluminium (Grey 7016, Canon Blue, Red 3004,<br />
Green 6005…)<br />
By co-extruding a bottom layer of coloured <strong>PVC</strong><br />
and, on the surface, an acrylic of the PMMA type<br />
with additives and a pigment, OCEPLAST offers the<br />
VR43mm and 58mm ranges resistant to scratches,<br />
UV and the thermal constraints that a solid-tinted<br />
<strong>PVC</strong> cannot support in solid colours.<br />
As well as an already-proven technology in window<br />
and door applications, the specifics of the process<br />
consist in solving the problems specific to a panel<br />
in a roller shutter (jamming, repeated opening and<br />
closing cycles) justifying the filing of a patent.<br />
> Bertrand Dubin & Stéphane Coutand<br />
oceplast<br />
oceWooD fence from oceDeplast<br />
The combination of WPC and aluminium brings<br />
personality and modernity to your exterior.<br />
The OCEWOOD fence is an aesthetic and innovative<br />
fence concept combining a variable-angle post with<br />
a thermo-lacquered aluminium finishing strip and<br />
tongue and groove 200mm panels in a <strong>PVC</strong>/wood<br />
composite.<br />
OCEPLAST’s objective consists of marketing a<br />
product that is:<br />
– genuinely differentiated from the traditional fences<br />
on the market made of <strong>PVC</strong>, wood or wire mesh<br />
– innovative with a universal post that can position<br />
the panels from 90° to 180°<br />
– customisable by assembling the panels at heights<br />
from 600mm to 1800mm<br />
– aesthetic due to its choice of colours (Range =<br />
8 colours + 4 WPC colours = 32 different colour<br />
combinations)<br />
> Bertrand Dubin & Stéphane Coutand<br />
> +33 251 483 034<br />
> France<br />
SolVin Award <strong>2010</strong> – 101<br />
Design Award
paliütis<br />
practical and fashionable colored boots in pvc<br />
The colored <strong>PVC</strong> boots are very practical, being<br />
waterproof and suitable for garden work or outdoor<br />
leisure. They are fashionable to wear in the cities<br />
as well. The stylish boot design from PALIüTIS is<br />
becoming a real trend in many European countries.<br />
> Dovile Adomaviciute<br />
> +370 5 215 2265<br />
> Lithuania<br />
102 – SolVin Award <strong>2010</strong><br />
pierluigi campagnola<br />
vrocker, rocker chair: a rocking chair 100% in pvc<br />
Vrocker is a small rocking chair made by foaming a<br />
<strong>PVC</strong> compound containing phthalate to enhance its<br />
plasticity. The whole product is made of <strong>PVC</strong> with a<br />
combination of 2 different processing techniques.<br />
The foamed structure is sprayed up using a<br />
technique that is borrowed from the automotive<br />
sector. After this, the chair is covered with a thin<br />
coat of <strong>PVC</strong> paint, making it waterproof and easier<br />
to clean. The outer skin and the soft quality of<br />
the inner material allow the chair to rock without<br />
damaging even the most delicate floor surfaces.<br />
This chair is made entirely of <strong>PVC</strong>: this means the<br />
material is easier to recycle and to recover.<br />
> Pierluigi Campagnola<br />
> +39 3382 987 764<br />
> Italy
solvay Benvic iBérica<br />
pvc compound for an helical profile for low-mid<br />
tension cables<br />
New <strong>PVC</strong> Compound for producing the helical<br />
profiles that are attached to the electrical mid<br />
tension lines. This profile substitutes heavier pieces<br />
(spheres), offering better performance in terms of<br />
easier quicker and easier installation. Its formulation<br />
ensures durability, with the required UV resistance.<br />
> Javier Vivancos<br />
> +34 935 444 375<br />
> Spain<br />
stuDio søren DahlgaarD<br />
the Breathing room<br />
The Breathing Room is an art project by Danish<br />
artist Søren Dahlgaard. you enter a white room,<br />
which literally breaths. The walls – made from<br />
<strong>PVC</strong> – move by the force of air, taken on concave<br />
and convex shapes, giving the impression that the<br />
room is alive and breathing. This rather strange<br />
behavior of the room suggests new ways of<br />
thinking in the context of familiar concepts such as<br />
buildings and spaces. Here it is an art installation.<br />
In other fields this could inspire new thoughts for<br />
architects, engineers, entrepreneurs, designers and<br />
manufacturers.<br />
> Søren Dahlgaard<br />
> +452 62 44 269<br />
> Denmark<br />
SolVin Award <strong>2010</strong> – 103<br />
Design Award
TrialSystem, Eco-design for the urban habitat is<br />
the only system that integrally covers the street<br />
signs stems, increasing their visibility. All pieces are<br />
made of recycled <strong>PVC</strong> from cable ducts, through an<br />
innovative extrusion-injection process enabling the<br />
use of difficult wastes.<br />
104 – SolVin Award <strong>2010</strong><br />
Wallcovering puBBlicita’ nominee<br />
trialsystem, eco-design for human habitat<br />
> Davide Noti<br />
> +39 0258 108 816<br />
> Italy
Traffic separators for cycle lanes are manufactured<br />
with the heavy fraction of electrical wire plastic<br />
sheathings. This separator notably improves existing<br />
products (concrete and waste tires separators) and<br />
gives a chance to a difficult to recover, but as well<br />
excellent quality waste.<br />
Zicla nominee<br />
Zebra: traffic separators for cycle lanes<br />
> Veronica Kuchinow<br />
> +34 932 218 687<br />
> Spain<br />
SolVin Award <strong>2010</strong> – 105<br />
Design Award
MODULAR PLAT<strong>FOR</strong>M based on very resistant auto<br />
fitting pieces manufactured with the heavy fraction<br />
of electrical wire plastic sheathings. This platform<br />
notably improves existing products (concrete<br />
platforms) and gives a chance to a difficult to<br />
recover but as well excellent quality waste.<br />
106 – SolVin Award <strong>2010</strong><br />
Zicla nominee<br />
modular auto-fit platform for bus access<br />
> Veronica Kuchinow<br />
> +34 932 218 687<br />
> Spain
ZWeinullvier WerBeagentur<br />
style-your-garage.com<br />
yesterday we had grey colored garage doors. Now<br />
the garage billboards from style-your-garage.com<br />
are giving a new look to boring garage tip-up doors,<br />
with expressive designs. The printed 3-D designs<br />
are photorealistic with intensive colors – a real eye<br />
catcher that makes neighbors, friends and passersby<br />
stop in amazement! The so-called garage<br />
billboards are made of high-quality material and<br />
resist sunlight, rain, wind and cold! They are easy to<br />
put up thanks to the Velcro tape and can be taken<br />
down again at any time! From a standard single<br />
garage right up the largest high-capacity garage:<br />
style-your-garage.com offers the right format for<br />
any garage door. Even for garage doors with nonstandard<br />
dimensions the photo billboards are easy<br />
to adapt individually.<br />
> Carmen Hönnige & Verena Lenninghausen<br />
> +49 8941 369 111<br />
> Germany<br />
SolVin Award <strong>2010</strong> – 107<br />
Design Award
participants<br />
innovation projects<br />
ALkOR DRAkA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16<br />
ALUPLAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17<br />
AMx AUTOMATION TECHNOLOGIES. . . . . . . . . . . . . . 18<br />
AVIMAT COATING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18<br />
B&B COMPOUNDS, ANTONPLAS . . . . . . . . . . . . . . . . . 19<br />
BAERLOCHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19<br />
BENECkE-kALIkO (2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20<br />
BEx FRANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21<br />
BOLON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22<br />
CENTI CORE COATING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23<br />
CHEMSON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23<br />
CHEMTURA VINyL ADDITIVES LAMPERTHEIM. . 24<br />
DEBOLON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24<br />
DICkSON CONSTANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25<br />
DIETzEL UNIVOLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25<br />
DREAM VALLEy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26<br />
DUGDALE PLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26<br />
EMPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27<br />
ExTRUPLESA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27<br />
ExTRUWOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28<br />
FAINPLAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28<br />
FERDINAND STükERjüRGEN . . . . . . . . . . . . . . . . . . . . 29<br />
FITT ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29<br />
FLAG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30<br />
GERFLOR GROUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31<br />
GF DEkA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32<br />
GkV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33<br />
GRABOPLAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34<br />
GREPA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35<br />
GRIFFINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35<br />
GROUPE LEGRAND (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36<br />
GRUPO PLáSTICOS FERRO . . . . . . . . . . . . . . . . . . . . . . . . 37<br />
HL PLASTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37<br />
HULTEC EUROPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38<br />
INEOS FILMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38<br />
INOUTIC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39<br />
kATOEN NATIE ITALIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39<br />
kLöCkNER PENTAPLAST . . . . . . . . . . . . . . . . . . . . . . . . . . 40<br />
köMMERLING CHEMISCHE FABRIk. . . . . . . . . . . . . . 41<br />
108 – SolVin Award <strong>2010</strong><br />
kONRAD HORNSCHUCH (2) . . . . . . . . . . . . . . . . . . 41-42<br />
kOPOS kOLíN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42<br />
kUNSTOSTOFF MUSEUM. . . . . . . . . . . . . . . . . . . . . . . . . . 43<br />
LICHTER - ExTRUSIONSTECHNIk . . . . . . . . . . . . . . . . 43<br />
LML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44<br />
MALIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44<br />
MEHLER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45<br />
NOVINTISS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45<br />
OMNOVA WALLCOVERING TRADING AS<br />
MURASPEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46<br />
ONGARO GIOVANNI, MINGHI TOMMASO . . . . . . . . 46<br />
ONGROPACk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47<br />
PERLEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47<br />
PIPELIFE INTERNATIONAL (5). . . . . . . . . . . . . . . . . 48-50<br />
PLASTICO ROTOTECH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50<br />
POLINTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51<br />
POLITSCH kUNSTSTOFFTECHNIk . . . . . . . . . . . . . . . . 52<br />
PROFEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53<br />
PROTAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54<br />
REHAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54<br />
RENOLIT BELGIUM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55<br />
RENOLIT IBERICA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55<br />
ROADCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56<br />
ROHM AND HAAS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57<br />
SIMONA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58<br />
SINEPIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58<br />
SIOEN INDUSTRIES (3). . . . . . . . . . . . . . . . . . . . . . . . . 59-60<br />
SIOEN INDUSTRIES AND DECEUNINCk. . . . . . . . . . 60<br />
SIRCI GRESINTEx (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-62<br />
Skz (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63<br />
SOCREDIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63<br />
SOLVAy BENVIC IBERICA (2) . . . . . . . . . . . . . . . . . . . . . . . 64<br />
STUDIO ARkIT & PARTNERS . . . . . . . . . . . . . . . . . . . . . . 65<br />
SVEDAFLEx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65<br />
TECHNOFRANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66<br />
THE DOW CHEMICAL COMPANy . . . . . . . . . . . . . . . . . . 66<br />
TRAVyL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67<br />
UNIVERSITy OF SALENTO . . . . . . . . . . . . . . . . . . . . . . . . . 67<br />
VARTECO QUIMICA IBERICA. . . . . . . . . . . . . . . . . . . . . . . 68<br />
VERSEIDAG - INDUTEx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68<br />
zAkłADy LENTEx SPółkA AkCyjNA. . . . . . . . . . . . . 69
ecycling projects<br />
13 RICREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72<br />
AFFRESOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72<br />
ART TERRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73<br />
BANNERBAGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74<br />
CHAIzE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75<br />
FITT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76<br />
G. FUMAGALLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77<br />
HAMOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78<br />
HTL ST. POELTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79<br />
MARIO SCHEICHENBAUER . . . . . . . . . . . . . . . . . . . . . . . . 79<br />
MAVINIL (3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-81<br />
MEHLER TExNOLOGIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81<br />
OD PLAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82<br />
PLASTICANA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83<br />
PROFINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84<br />
TöNSMEIER kUNSTSTOFFE . . . . . . . . . . . . . . . . . . . . . . . 85<br />
TRUCS-TROUVAILLES.COM . . . . . . . . . . . . . . . . . . . . . . . . 85<br />
VINyLIT FASSADEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86<br />
VINyLTECH INTERNATIONAL . . . . . . . . . . . . . . . . . . . . . . 86<br />
WEIDNER IBERICA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87<br />
Design projects<br />
participants<br />
13 RICREA (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90<br />
ACE OF PLUGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91<br />
ANNE-SOPHIE BOURGOGNE . . . . . . . . . . . . . . . . . . . . . . 91<br />
BARRAIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92<br />
BEA SzENFELD FASHION TEAM . . . . . . . . . . . . . . . . . . 92<br />
BI API. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93<br />
CIxOUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93<br />
FERRARI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94<br />
FIRST REPUBLIk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94<br />
IDEFLEx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95<br />
LML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96<br />
MARTINA DOLL (3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97-98<br />
MOLUSk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99<br />
My NOTE DECO - GROUPE IMPEx . . . . . . . . . . . . . . 100<br />
NICOLL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100<br />
OCEPLAST (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101<br />
PALIüTIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102<br />
PIERLUIGI CAMPAGNOLA. . . . . . . . . . . . . . . . . . . . . . . . 102<br />
SOLVAy BENVIC IBéRICA . . . . . . . . . . . . . . . . . . . . . . . . . 103<br />
STUDIO SøREN DAHLGAARD . . . . . . . . . . . . . . . . . . . 103<br />
WALLCOVERING PUBBLICITA. . . . . . . . . . . . . . . . . . . . 104<br />
zICLA (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-106<br />
zWEINULLVIER WERBEAGENTUR . . . . . . . . . . . . . . 107<br />
SolVin Award <strong>2010</strong> – 109
the rules<br />
purpose of these awards<br />
The SolVin Award for <strong>PVC</strong> Innovation is intended<br />
to promote the image of <strong>PVC</strong> as an innovative,<br />
versatile, cost effective and safe product that<br />
contributes positively to the welfare of the company.<br />
Innovations submitted to the competition shall be<br />
judged by an independent jury. The competition<br />
offers the candidates an opportunity to promote<br />
their <strong>PVC</strong>-related project.<br />
candidates<br />
Candidates may be material processors, additive<br />
suppliers, machines producers, end-users,<br />
specifiers, service providers, media related<br />
activities, academic institutions, designers,<br />
students, etc. Personnel of SolVin and companies<br />
of jury members may not apply. joint applications<br />
between different kinds of candidates or several<br />
applications for one candidate are accepted.<br />
innovations eligible for the contest<br />
An innovation in the frame of this contest is a<br />
product or a process that complies with the<br />
following combined criteria (the list is not exhaustive<br />
and is given for example only):<br />
- To have a link with <strong>PVC</strong> (for example: additives,<br />
processing machines, composites of <strong>PVC</strong>,<br />
logistics, …).<br />
- To contribute to the positive image of <strong>PVC</strong> (for<br />
example: to be a new application for <strong>PVC</strong>, to use<br />
recycled material, to reduce waste, to improve<br />
hygiene, to preserve the environment, …).<br />
- To bring improvement to existing products (for<br />
example: to replace another material, at lower cost<br />
or higher performance, to improve mechanical,<br />
chemical, aesthetical characteristics of existing<br />
products, to allow a better processability or a<br />
higher productivity, …).<br />
- It should lead to an application that exists or could<br />
be developed on the European market.<br />
110 – SolVin Award <strong>2010</strong><br />
- It should be under development or available on<br />
the market from 1st january 2008.<br />
All innovations presented and results of the 2001,<br />
2004 & 2007 competitions are available at the<br />
following Internet address: www.solvinaward.com.<br />
how to apply?<br />
your application form should preferably be<br />
completed in English and sent to us between<br />
1st january <strong>2010</strong> and 30th April <strong>2010</strong>. you<br />
can find the file on our Internet website:<br />
www.solvinaward.com.<br />
Please send it back to: SolVin Award - <strong>SOLVIN</strong> S.A.<br />
- rue de Ransbeek, 310 - 1120 Bruxelles – Belgium<br />
or by e-mail to: award.solvin@solvay.com<br />
Do not hesitate to contact your SolVin delegate for<br />
more information or help.<br />
In the submission you should:<br />
- Explain how and why the innovation complies with<br />
the above mentioned combined criteria.<br />
- Describe it accurately, please attach, if possible,<br />
a prototype or a sample and a high definition<br />
picture.<br />
- Offer a practical usage for the product.<br />
Please note that any submissions made will be<br />
considered by SolVin to contain information that<br />
is available to the open market and that there<br />
will be no restriction for SolVin to use the file’s<br />
contents in publications, symposia, etc. Therefore,<br />
where appropriate, candidates should ensure that<br />
arrangements have been made to protect their<br />
innovation through the normal channels. The<br />
candidates alone are responsible for their project<br />
and the information communicated in this regards.<br />
The candidates expressly release SolVin from<br />
any responsibility linked to these projects or the<br />
information provided in connection with them.
the jury<br />
The jury will consist of 5 representatives<br />
independent of SolVin. Any decision of the jury is<br />
final. The candidates waive any recourse against<br />
SolVin, its employees, the jury or its members by<br />
reason of any decision taken by the jury.<br />
the awards<br />
In September <strong>2010</strong>, SolVin will inform the finalists<br />
of their participation to the ceremony which will<br />
take place in Düsseldorf on Thursday 28th, October<br />
<strong>2010</strong> in the evening, on the occasion of the fair<br />
k <strong>2010</strong>.<br />
Three finalists will be rewarded with the following<br />
prizes:<br />
- The Gold SolVin Award for a value of 50.000 EUR.<br />
- The Silver SolVin Award for a value of<br />
25.000 EUR.<br />
- The Bronze SolVin Award for a value of<br />
10.000 EUR.<br />
On the occasion of the SolVin Award <strong>2010</strong>, the jury<br />
will also reward special prizes:<br />
- The SolVin Award for Recycling for a value of<br />
7.500 EUR.<br />
- The SolVin Award for Design for a value of<br />
7.500 EUR.<br />
The intention of SolVin is to reward the winners in<br />
order to boost their innovation process. The value<br />
of the Prizes should ideally be used by the winners<br />
to foster their innovation and can be converted into<br />
R&D projects, marketing studies, brain storming or<br />
creativity sessions, collaborations with academics<br />
like Universities, in partnership with SolVin.<br />
the agenda<br />
- Entries will be called for between 1st january<br />
<strong>2010</strong> and 30th April <strong>2010</strong>.<br />
- The jury will select the Finalists in<br />
September <strong>2010</strong>.<br />
- SolVin will officially present the awards on<br />
Thursday 28th, October <strong>2010</strong> during the<br />
kunststoffe Messe <strong>2010</strong> in Düsseldorf.<br />
the rules<br />
SolVin Award <strong>2010</strong> – 111
application form<br />
The candidates accept the rules of the SolVin Award<br />
<strong>2010</strong> for <strong>PVC</strong> Innovation.<br />
Do not hesitate to contact your SolVin delegate for<br />
more information or help.<br />
the candidate<br />
Name of the contact:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Position:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Name of the company:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Address:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Phone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Fax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
e-mail: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Internet website of the company:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
What has initiated this application?<br />
- We found the form on the website solvinpvc.com<br />
- We were contacted by a SolVin employee Mr or<br />
Mrs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
- We discovered the contest via<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
- Other: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
112 – SolVin Award <strong>2010</strong><br />
title of the project<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
general description of the innovation<br />
o Product<br />
o Process<br />
o In development<br />
o Available on the market since 1st january 2008<br />
o High definition picture, sketch, plan here attached<br />
o Patent number copyrights:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .nr. . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Description of the product or the process<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
how is the product manufactured or how will the<br />
innovation be implemented?<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
this innovation<br />
Has a link with <strong>PVC</strong> because:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Contributes to the positive image of <strong>PVC</strong> because:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
application form<br />
Brings an improvement towards the existing<br />
products because:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Exists or could be developed on the European<br />
market because:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
Summary for publication in the brochure:<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<br />
N.B.:Please send us a prototype or a sample.<br />
SolVin Award <strong>2010</strong> – 113
SolVin makes reasonable efforts to provide<br />
accurate and current information on this booklet.<br />
Any information, advice, instruction and/or<br />
recommendation relating to the 141 application<br />
files is given by SolVin in good faith, to his current<br />
best knowledge. SolVin warrants only that such<br />
information is given with reasonable skill and care.<br />
SolVin does not warrant or assume any legal liability<br />
or responsibility for the accuracy, completeness or<br />
usefulness of any information, advice, instruction<br />
and/or recommendation.<br />
114 – SolVin Award <strong>2010</strong>
310 Rue de Ransbeekstraat<br />
1120 Brussels – Belgium<br />
Tel: +32 2 264 21 11<br />
Fax: + 32 2 264 35 85<br />
www.solvinpvc.com<br />
www.solvinaward.com