OWNER'S MANUAL - Specialized Bicycles

More documents

Recommendations

Info

Fox TriadX-Fusion RLA / RC12REAR AIR SHOCK SETUPSag Setting: Set the sag (20-25% of shock stroke). Seeattached pressure chart for starting air pressure.Note - the chart is only a starting point, actual sag needs to thechecked and adjusted on the bike, while riding, and at regularintervals. After setting the pressure, push the rubber ring up tothe seal, sit on the bike gently, dismount, and measure sag.Set Standard rebound damping adjuster to rider preference.Typically a slower rebound for slow speed, bigger hits toeliminate kickback, or faster rebound for higher speeds andsmaller hits, so the suspension does not dive and has time torebound between bumpsFox Triad ride tips (fig. 1): Three compression settings dial inthe shock efficiency and ride characteristics.1) Lockout- compression is closed, locking out the shock forthe most efficient pedaling setting.2) ProPedal- adds in slow speed compression to improve shockefficiency while still allowing the shock to absorb mediumand large size hits. This setting is great for all-round ridingproviding an efficient pedaling platform while still absorbingtrail features.3) Open- very little compression damping for the most suppleand sensitive ride possible.X-Fusion RLA ride tips (fig. 2): the RLA shock has a uniquerebound adjust feature that affects compression, and lockoutsat the “+” side.X-Fusion RC ride tips: the blue compression lever will close theshock’s compression, locking it out for the most efficient ride.Fig.1Fig.2Rider Triad X-Fusionlbs kg air (psi) air (psi)90-100100-110110-120120-130130-140140-150150-160160-170170-180180-190190-200200-210210-220220-230230-240240-250250-265265-280280-29541-4545-5050-5454-5959-6464-6868-7373-7777-8282-8686-9191-9595-100100-104104-109109-113113-120120-127127-13485-9595-105105-115115-125125-135135-145145-155155-165165-175175-185185-195195-205205-215215-225225-235 190-200235-245 200-210245-26065-7070-7575-8080-9090-100100-110110-120120-130130-140140-150150-160160-170170-180180-190210-225260-275 225-240275-290 240-255NOTE: This air chart is designedas a recommended starting pointonly. Please refer to your shockowner’s manual for additonalsetup information.
DERAILLEUR GUARD INSTALLATIONThe <strong>Specialized</strong> Derailleur guard is available separately through your local <strong>Specialized</strong> dealer. The guard works with solid or Q/Raxle types and is compatible with all Mountain bike models using the 2005-2006 Enduro/Demo derailleur hanger.Guard Part #: 9896-4030Hanger Part #: 9895-40213125Derailleur Guard Installation (Q/R option):1. Install rear derailleur on derailleur hanger.2. Place rear wheel in frame and install Q/R,with springs and without Q/R end nut.3. Insert appropriate derailleur guard pin in derailleur.4. Place guard sleeve in derailleur guard.5. Slide derailleur guard and sleeve over guard pin and Q/R.6. Install supplied Q/R nut and tighten Q/R.7. Torque guard pinch bolt to 80 in-lbf (9 N-m).10GUARD PINSLong (31mm):All SRAM derailleursAll Shimano Shadow derailleursMedium (25mm):Shimano XTR / XT / LX(All Shimano derailleurs withcountersunk hanger bolt)Short (10mm):(All Shimano derailleurs withoutcountersunk hanger bolt)13
Page 1: OWNER’S MANUAL1
Page 4 and 5: Congratulations on your purchase an
Page 7 and 8: FORK SETUPINFORMATIONWARNING! The F
Page 9 and 10: FSRxc Geometry12345678*Top Tube Len
Page 11: FSRxc / MYKA FRAME GEOMETRY1250mm53
Page 15 and 16: NOTE: Bearing and Bolt Kits are ava
Page 17 and 18: USEFUL PRODUCT LIFE CYCLEEvery Spec
Page 20: 15130 Concord CircleMorgan Hill, CA

OWNER'S MANUAL - Specialized Bicycles

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?