VERTICALITY - LIGHTING

Framing and roofingVERTICALITY - WORK TECHNIQUESA safety device must be put in place before working on a roof for protectionin case of slips or falls. The type of system is determined by the length ofthe operation. If the operation is long, it should be protected by collectiveprotection in order to eliminate any risk of falling. If it is a short-term,temporary operation, individual protection is used. (PPE is necessaryin either case for installing the collective protection if the building is notalready equipped with it). In this situation, there is a great risk of falling.Each person must use a fall arrest system (for example, energy absorberwith mobile fall arrester and safety rope).If collective protection is present and adequate for fall protection, a workpositioning system with adjustable lanyard is the perfect solution.A B C D E F20© Arnaud Childeric - Kalice / Bio&nergieA VERTEX VENT: comfortable and ventilated helmet for work at height with strong chin strap to limit the risk of the helmet coming off during a fall.B NEWTON FAST JAK: fall arrest harness with integrated vest, easy and quick to put on. C GRILLON: temporary horizontal lifeline with quick-adjustsystem. D ASAP’SORBER: energy absorber with integrated lanyard allows some distancing from the safety rope. E ASAP: mobile fall-arrester forinstallation on a safety rope - works without any intervention by the user. F AXIS: versatile 11 mm diameter rope with sewn end.All equipment pages 40 to 141.21