VERTICALITY - LIGHTING

VERTICALITY - PRODUCTSMOBILE FALL ARRESTER72© Arnaud Childeric - Kalice / AbcyssInstalled on a lifeline, the ASAP mobile fall arrester follows theuser automatically as he moves, whether on an inclined or verticalsurface. In case of a shock or sudden acceleration, the ASAP'slocking wheel will lock onto the rope and stop the fall. If necessary,the mobile fall arrester can be connected to an energy-absorbinglanyard when working farther from the lifeline.ASAP ® B71Mobile fall arrest device for rope• For use on a lifeline• Stops a fall, a slide or uncontrolled descent• Locks even if the device is grabbed during a fall• Works on vertical or angled rope• Moves up and down along the rope without manualintervention• Easy to install and remove at any point on the rope• Can be used with an energy absorbing lanyard• For 10.5 to 13 mm semi-static ropes (EN 1891type A) certified with the device*• Comes with the OK TRIACT-LOCK automatic lockingcarabiner• Weight: 427 g (350 g for ASAP and 77 g forOK TRIACT-LOCK)• Individually tested• Certification: CE EN 353 2, CE EN 12841 type A* For further information, please refer towww.petzl.com/ASAPAttachment holeOK TRIACT-LOCK carabiner includedLocking wheelProtective coverUnder normal use, the ASAP's lockingwheel rolls along the rope, whether it isvertical or angled, to follow the user in hismovements. In case of a fall or excessivespeed (slide, uncontrolled descent), thewheel will lock and stop the fall.The ASAP may be quickly and easilyinstalled anywhere on the rope byretracting the locking wheel.ASAP’SORBER L71Energy absorber with integratedlanyard for ASAP• Designed to connect the ASAP mobile fallarrester to a harness• The energy generated from a fall isabsorbed by the tearing of specificstitching• Available in two lengths, to get thedesired distance from the safety rope,to reach the best compromise betweendistance from the rope and height of thefall:- ASAP’SORBER (L71 20): 20 cm(required clearance: 3.15 m, weight 60 g)- ASAP’SORBER (L71 40): 40 cm(required clearance: 3.50 m, weight 100 g)• Ends equipped with STRING to holdthe connector in position and protect thewebbing from abrasion• Certification: CE EN 35573HEADLAMPS ROPESANCHORSPULLEYS ROPE CLAMPS DESCENDERSHELMETSHARNESSESLANYARDS ANDENERGY ABSORBERSMOBILE FALLARRESTERCARABINERS,CONNECTORSPACKS ANDACCESSORIES