VERTICALITY - LIGHTING

VERTICALITY - PRODUCTSProgression lanyard Lanyard for ASAP Accessories Technical data for lanyards and energy absorbersSPELEGYCA C44Asymmetrical Y-shaped sewn lanyard madeof flat webbing• Used with an ASCENSION handled rope clamp forprogression on a rope• Asymmetrical Y-shape for ease of movement:- can connect short or long, depending onprogression needs- the two arms allow the user to remain connected toan anchor when passing intermediate anchor points• Ends equipped with a STRING, which holds theconnector in place and protects the webbing fromabrasion• Sewn, flat webbing for more resistance to abrasionand wear• Length:- short end: 0,3 m- long end: 0,6 m• Certification: CE EN 354• Weight: 90 gWARNING: the SPELEGYCA is not an energyabsorber.ASAP’SORBER L71Lanyard with energy absorber for the ASAPmobile fall arrester• Designed to connect the ASAP mobile fall arresterto a harness• The energy generated from a fall is absorbed by thetearing of specific stitching• Ends equipped with STRING to hold the connectorin position and protect the webbing from abrasion• Available in two lengths, to get the desired distancefrom the safety rope, to reach the best compromisebetween distance from the rope and height of the fall:- ASAP’SORBER (L71 20): 20 cm (necessaryclearance 3.15 m, weight 60 g)- ASAP’SORBER (L71 40): 40 cm (necessaryclearance 3.50 m, weight 100 g)• Certification: CE EN 355See also ASAP mobile fall arresterSTRING M90000 L - M90000 XLWebbing protection• Holds the connector in place and protects thewebbing from abrasion• Available in two sizes:- STRING L (M90000 L): for webbing from 15 to20 mm in width (SPELEGYCA, ABSORBICA-I etABSORBICA-Y)- STRING XL (M90000 XL): for webbing from 25 to30 mm in width (ASAP’SORBER, ABSORBICA)Lanyards with energy absorberReference Length Length after full tear Clearance (fall factor 2) Certification WeightABSORBICA L57 0.2 m 1.6 m3.9 m + length of energy absorber,lanyard and connectors70 71CE EN 355ABSORBICA-I 80L58160 g0.8 m (w/o connectors) 1.5 mCE EN 355ABSORBICA-Y 80 L59 210 g4.35 mABSORBICA-I 80 MGO L58 MGO655 g1.05 m 1.75 m CE EN 355, CE EN 362ABSORBICA-Y 80 MGO L59 MGO 1120 gABSORBICA-I 150 L70150 I365 g1.5 m (w/o connector) 3.35 mCE EN 355ABSORBICA-Y 150 L70150 Y 500 g6.1 mABSORBICA-I 150 MGO L70150 IM825 g1.75 m 3.6 m CE EN 355, CE EN 362ABSORBICA-Y 150 MGO L70150 YM 1420 gLanyards for ASAP mobile fall arresterASAP’SORBERClearanceMinimum required clearancewith an ABSORBICA-I 80 MGO(fall factor 2).L71 20 0.2 m 0.45 m 3.15 m CE EN 355 60 gL71 40 0.4 m 0.80 m 3.50 m CE EN 355 100 gLength of the lanyardABSORBICA-I 80 MGO+ carabiner = 1.15 mExtension of the energyabsorber = 0.7 mDistance between tie-inpoint on harness andworker's feet = 1.5 mMinimum post-fallground clearance = 1 m154 gMinimum requiredclearance = 4.35 mHEADLAMPS ROPESANCHORSPULLEYS ROPE CLAMPS DESCENDERSHELMETSHARNESSESLANYARDS ANDENERGY ABSORBERSMOBILE FALLARRESTERCARABINERS,CONNECTORSPACKS ANDACCESSORIES