Falcon 4.0 (BMS)

More documents

Recommendations

Info

USAF /DoD 111.2403.72 Rev: 1108 BMS 4.32CONTENTS1. Contents.2. TACAN Selection Normal and backup mode / ILS selection.3. Blank for Notes.4. Airbases – Italy5. Airbases – Italy (continued)6. Airbases – Italy (continued) / Sicily / Greece7. Airbases & Airstrips – Macedonia / Albania8. Airbases & Airstrips – Slovenia / Montenegro.9. Airbases & Airstrips – Serbia / Bosnia Herzegovina.10. Airbases & Airstrips – Croatia / Hungary11. Frequency: Common / Mission Spec.BMS Balkan Navigation Volume 1/11
USAF /DoD 111.2403.72 Rev: 1108 BMS 4.321. ICP2. DED3. ICP4. DED5. DED6. HSI7. HSI8. ICP1. TACAN switch2. TACAN domain3. TACAN band4. TACAN channel5. HSI6. HSI7. TACAN switchTACAN SELECTION – NORMAL MODESelect T-ILS pageCheck scratchpad selected. If not use the DCS-up btn to selectscratchpad entry.(between asterisks)Input TCN channel (numeric btns) then ENTER keyCheck TCN domain (A/A TR or TR) Toggle domain with DCS-SEQ button.Check band. X for ground Y for air. Change band by imputing 0(zero) on the scratchpad.Select TCN mode and check in range (flags off)Select Radial (CRS knob) and navigate.DCS-Rtn button to return to main DED page.TACAN SELECTION – BACKUP OPSSelect BACKUPAs required manually A/A TR or TRAs required manually X (ground) or Y (air)manually input TCN channel.Select TCN mode and check in range (flags off)Select Radial (CRS knob) and navigateBack to UFC if required.Backup mode is provided in case of avionic failure or battle damage.When all instruments are lost the backup mode may be the only meanto recover to friendly territory. All backup switches are on the left panel.ILS SELECTION1. ICP2. DED3. ILS4. CRS5. CMD STRG6. HSI7. ADI8. HUD & HSISelect T-ILS pageCheck scratchpad selected. If not use the DCS-up btnto select scratchpad entry (between asterisks)Input ILS frequency (5 digits) then ENTER keyCheck CRS selected. If not use DCS-down to selectCRS entry. Input RWY CRS (3 digits)As required (ON or OFF) visible in HUD onlySelect TCN/ILS or NAV/ILS mode and set RWY CRSConfirm Flags OFF (Loc & Glide)Confirm ILS loc & glide bars visible.LOC interception is performed first. GLIDE interception then followsfrom below. Normally LOC and GLIDE interception is completed atOuter Marker and gear is lowered.BMS Balkan Navigation Volume 2/11
Page 1: USAF /DoD 111.2403.72 Rev: 1108 BMS
Page 6 and 7: USAF /DoD 111.2403.72 Rev: 1108 BMS
Page 12: USAF /DoD 111.2403.72 Rev: 1108 BMS

Falcon 4.0 (BMS)

Create successful ePaper yourself

Delete template?

Save as template?