CX300 Microprocessor Timer/Counter - Danaher Specialty Products

OUTPUT OPERATING MODESON-Delay OperationThe contacts are energized at the end of the timing/counting cycleand remain energized until the unit is reset.Interval OperationThe contacts are energized during the timing/counting cycle andthen shut off at the end of the cycle.START INPUTPROGRAMMEDCONTACTSTIMING OR COUNTINGRESETRESETSTART INPUTPROGRAMMEDCONTACTSTIMING OR COUNTINGRESETPulse Output OperationThe contacts are energized at the end of the timing/counting cyclefor a pulse which is user programmable. See Front Panel FeatureProgramming instructions for details on how to program the pulselength..START INPUTPROGRAMMEDCONTACTSMOUNTING1.406(35.71)1.406(35.71)TIMING ORCOUNTINGDRILL AND TAP FOURHOLES FOR 8-32 SCREWS(INCLUDED W/UNIT)3.187 + .062(80.95 + 1.57)DIA. CUTOUTPULSERESETPulse and Repeat OperationThe contacts are energized at the end of the timing/counting cycle for apulse which is user programmable. At the same time that the cycle iscompleted and the pulse output begins, the timing/counting cycle resetsand begins again. This repeat operation continues as long as the startcircuit is energized.START INPUTPROGRAMMEDCONTACTS4.250(107.95)TIMING ORCOUNTING3.062(77.77)PULSE PULSETIMING ORCOUNTINGRESET5TEOLTETAC IT MLREIORZN SI INCG1.406(35.71)1.406(35.71)MTG. HOLEUSED FORGROUNDINGCASE3.812(96.82)4.125(104.78)1.625(41.27)5.750(146.05)ENCLOSURESACCESSORIESModel No. NEMA Class DescriptionHN308 1 Surface Mtg. with terminal blockHN364 1 Surface Mtg. without terminal blockHN370 1A Dual unit cabinet less unit cases andtoggle switch, with 9 terminal blockModel No. DescriptionH-5331 Mounting Brackets 2 req'd per timerHP50-31 One Hole Mounting RingHP50-131 CYCL-FLEX Water-Sealed HousingHP50-133 Surface Mounting Adapter to use in place of bracketsPDM-534 1/4 DIN Adapter PlateORDERING INFORMATIONCX3 1 2 A6OUTPUT TYPESym. DescriptionVOLTAGE & FREQUENCYSym. Description1410A DPDT Instantaneous10 DPDT Delayed Relay Output1A Solid State OutputCOUNT / INHIBITINPUT VOLTAGESym.DescriptionA6B6Z6120 VAC, 50/60 Hz240 VAC, 50/60 Hz24 VAC, 50/60 Hz1212-50 VDC, 20-28 VAC, 50/60 Hz120 VDC, 120 VAC, 50/60 HzDANAHER SENSORS & CONTROLS5.35