Airpac technical and installation manual EN - Carpat Energy

More documents

Recommendations

Info

The unit of compressor and pump running time is 100 hours.As for how to access the Query/Warning/Alarm/Parameter menus above, see also < Accessing the Menus>Parameters listed under themenu vary with the password privileged user.Before accessing the Parameter menu, select the user group (“NO” “EU” or “ID”) first and input the correspondingpassword that is required for the service men and factory users.See also Legend for system Mode and statusOn the right lower side, nine icons are used to indicate system modes and status.Icon Meaning Icon MeaningPower on/OffCoolingHeatingHot water(The icon is displayed inhouse)compressorDefrostHouse (All devices within this icon are called indoor devices.)When the device is activated, the corresponding icon will be lit.Legend for devicesOn the right middle area, the icons are used to indicate the work status of the devices.Icon Meaning Status and IndicationCompressorFlow switchIndoor pumpcondenser fanOn solid: RunningBlinking : Alarms related to compressorBlinking: flow switch alarmOn solid: runningBlinking: alarms detectedFor any warning/alarm detected, the corresponding device icon and the / icon will blink continuously untilthe alarm is acknowledged or resetwww.joliet‐europe.cominfo@joliet‐europe.com
Menu TreeBy default, end users can access all parameters in ST group.Legend for parameter groupsCode Indication Code IndicationCM Compressor settings ST Set pointsCN Condenser settings UI User interfaceEV Evaporator settings AL Alarm settingsSF Special functions DF Defrost settingsAccess RightsThree groups of users with different privilege levels are described below.PrivilegeLevelIDEUNOUserFactoryUserServiceMenEndUserMain ActivitiesSpecial• Password required• Configure and commissionapplications by setting/adjustingparameter values• Password required• Configure and commissionapplications by setting/adjustingparameter values• No password is required• Adjust limited values of parameters(by default , can only adjust valuesof parameters in the “ST” group)All• View informationand status• Acknowledgewarnings andalarms• Heating /Coolingchangeoverwww.joliet‐europe.cominfo@joliet‐europe.com
Page 9: LCD DisplayOperation of RWR470.10 i
Page 13 and 14: Wiring with Power SupplyRWR470.10 i
Page 27 and 28: Defrost SettingsDF02DescriptionsFan
Page 29 and 30: DimensionsLSQ06R1/Cwater outletwate
Page 31 and 32: LSQ20R2, LSQ20R2/RHeater wateroutle
Page 33: StandardsEC Directives:73/23/EEC89/

Airpac technical and installation manual EN - Carpat Energy

Create successful ePaper yourself

Delete template?

Save as template?