Untitled - CIE-Group

ASADAAFAFAMCA 4060 LTU 4060SKLKLAKMSK MULTI-CHANNEL LOW IMPEDANCE line transformers (100 V)4824828888Power amplifier 4x60WThe pairs of channels 1/2 and 3/4can operate independently:• In parallel (input signal ofch 1 pilots also ch 2);• in stereo (each channel hasa different signal on input);• “bridge” (inputs are powered withthe same signal in reverse phase)both in parallel and in stereo; eachamplifier delivers 60W/ 4 0hm whilein bridge mode power delivered byeach pair of amplifiers will be120W/ 8 0hm. Each channel hasvolume control, luminous indicatorsof the input signal and saturation.The front panel also has luminousindicators for operating modes(bridge, parallel, stereo).Power amplifier with4 line transformers• Activation of emergency on allchannels simultaneouslypower amplifiersRetro LTU 4060MCA 4060 LTU 4060Code 14753 14763Features Monoblock amplifier with 4 channels Unit with 4 line transformersContinuous power with all piloted channels 4x60W (4ohm) -Input power per channel - 60W (4ohm)Output per channel - 60W a 100V/167ohmOutput with two added channels - 2x120W a 100VMinimum load impedance 4ohm (in stereo), 8ohm (in bridge) -Frequency response @1 W, -3dB da 20Hz a 50 kHz 1dB 20Hz, -3dB 16kHzHarmonic distortion THD+N < 0.05% -Signal/noise ratio 85dB (with filter 22Hz-22kHz) -Separation between channels -66dB @100Hz, -75dB @ 1kHz, -70dB @ 10kHz -Input impedance 10kohm (unbalanced) 20kohm (balanced) -Input sensitivity 0dBu (0.775V) with balanced input, 6dBu (1.5) with unbalanced input -Controls Volume control for each channel -Indicators Visual led indicators for each channel -Input connector - 2 “Faston” connectorsOutput connector “Faston” connectors 3 “Faston” connectorsPower supply Vac 230 V 50 Hz -Absorption 300 W (@ max power with music signal) -Operating conditions -20°C+40°C with max. humidity